From: Gabor Juhos Date: Fri, 23 Dec 2011 14:27:10 +0000 (+0000) Subject: ramips: add support for the Senao/EnGenius ESR-9753 board X-Git-Tag: reboot~15273 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2cb946f5b4ebb720739b4dbb80c7821843f22ee5;p=openwrt%2Fstaging%2Fnoltari.git ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski SVN-Revision: 29603 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index e0a4a39218..a150cc26d8 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -33,6 +33,9 @@ get_status_led() { dir-300-b1 | dir-600-b1 | dir-600-b2) status_led="d-link:green:status" ;; + esr-9753) + status_led="esr-9753:orange:power" + ;; fonera20n) status_led="fonera20n:green:power" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index d6db35c044..fa6607fd7f 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -47,6 +47,7 @@ case "$FIRMWARE" in argus-atp52b | \ bc2 | \ + esr-9753 | \ fonera20n | \ hw550-3g | \ mofi3500-3gn | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index e6c7e8456e..d0a9ac0711 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -16,12 +16,29 @@ commit system EOF } +set_wifi_led() { + local sysfs="$1" + + uci batch </dev/null diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 7d45bde096..faed42162c 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -62,6 +62,9 @@ ramips_board_name() { *"DIR-600 B2") name="dir-600-b2" ;; + *"ESR-9753") + name="esr-9753" + ;; *"F5D8235 v2") name="f5d8235-v2" ;; diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 211f72c5bc..4076d6c500 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -27,6 +27,7 @@ enum ramips_mach_type { /* RT3052 based machines */ RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ RAMIPS_MACH_BC2, /* NexAira BC2 */ + RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/ RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index cf8ede3b6b..3e58242161 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -31,6 +31,11 @@ config RT305X_MACH_DIR_300_REVB select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_ESR_9753 + bool "EnGenius ESR-9753 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_FONERA20N bool "La Fonera20N board support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index be3d308f2d..5da73155f9 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o +obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c new file mode 100644 index 0000000000..88043a01d7 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c @@ -0,0 +1,123 @@ +/* + * Senao / EnGenius ESR-9753 board support + * + * Copyright (C) 2011 Artur Wronowski + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "devices.h" + +#define ESR_9753_GPIO_LED_POWER 8 +#define ESR_9753_GPIO_LED_WPS 14 + +#define ESR_9753_GPIO_BUTTON_WPS 0 /* active low */ +#define ESR_9753_GPIO_BUTTON_RESET 10 /* active low */ + +#define ESR_9753_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition esr_9753_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x0a0000, + }, { + .name = "rootfs", + .offset = 0x150000, + .size = 0x2b0000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x3b0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data esr_9753_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(esr_9753_partitions), + .parts = esr_9753_partitions, +#endif +}; + +static struct gpio_led esr_9753_leds_gpio[] __initdata = { + { + .name = "esr-9753:orange:power", + .gpio = ESR_9753_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "esr-9753:orange:wps", + .gpio = ESR_9753_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_button esr_9753_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = ESR_9753_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = ESR_9753_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init esr_9753_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0, &esr_9753_flash_data); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(esr_9753_leds_gpio), + esr_9753_leds_gpio); + + ramips_register_gpio_buttons(-1, ESR_9753_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(esr_9753_gpio_buttons), + esr_9753_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_ESR_9753, "ESR-9753", "Senao / EnGenius ESR-9753", + esr_9753_init); diff --git a/target/linux/ramips/files/drivers/net/ramips_esw.c b/target/linux/ramips/files/drivers/net/ramips_esw.c index c681eed830..027284b084 100644 --- a/target/linux/ramips/files/drivers/net/ramips_esw.c +++ b/target/linux/ramips/files/drivers/net/ramips_esw.c @@ -19,6 +19,11 @@ #define RT305X_ESW_REG_FPA2 0xc8 #define RT305X_ESW_REG_FCT2 0xcc #define RT305X_ESW_REG_SGC2 0xe4 +#define RT305X_ESW_REG_P0LED 0xa4 +#define RT305X_ESW_REG_P1LED 0xa8 +#define RT305X_ESW_REG_P2LED 0xac +#define RT305X_ESW_REG_P3LED 0xb0 +#define RT305X_ESW_REG_P4LED 0xb4 #define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16 #define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13) @@ -227,6 +232,13 @@ rt305x_esw_hw_init(struct rt305x_esw *esw) rt305x_esw_wr(esw, 0x3f502b28, RT305X_ESW_REG_FPA2); rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA); + /* Force Link/Activity on ports */ + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P0LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P1LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P2LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P3LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P4LED); + rt305x_mii_write(esw, 0, 31, 0x8000); for (i = 0; i < 5; i++) { /* TX10 waveform coefficient */ diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 4f92d30ecd..12487854d5 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -162,6 +162,10 @@ define Image/Build/Profile/RTG32B1 $(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1) endef +define Image/Build/Profile/ESR9753 + $(call Image/Build/Template/GENERIC_4M,$(1),esr-9753,ESR-9753) +endef + define Image/Build/Profile/FONERA20N $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N) $(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000) @@ -253,6 +257,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/DIR300B1,$(1)) + $(call Image/Build/Profile/ESR9753,$(1)) $(call Image/Build/Profile/RTG32B1,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) $(call Image/Build/Profile/V22RW2X2,$(1)) diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index e3553e1efb..2a5473dfb2 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -94,6 +94,7 @@ CONFIG_RAMIPS_WDT=y CONFIG_RT305X_MACH_ARGUS_ATP52B=y CONFIG_RT305X_MACH_BC2=y CONFIG_RT305X_MACH_DIR_300_REVB=y +CONFIG_RT305X_MACH_ESR_9753=y CONFIG_RT305X_MACH_F5D8235_V2=y CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_HW550_3G=y diff --git a/target/linux/ramips/rt305x/profiles/engenius.mk b/target/linux/ramips/rt305x/profiles/engenius.mk new file mode 100644 index 0000000000..09c716ecd9 --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/engenius.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2011 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/ESR9753 + NAME:=EnGenius Profile + PACKAGES:= +endef + +define Profile/ESR9753/Description + EnGenius profile. +endef +$(eval $(call Profile,ESR9753))