From: John Crispin <john@openwrt.org>
Date: Mon, 15 Sep 2014 10:19:01 +0000 (+0000)
Subject: ar71xx: refactor ubnt xw board setup
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2c4c6d135b8d342cb257690ebe6729d325afc68c;p=openwrt%2Fstaging%2Flinusw.git

ar71xx: refactor ubnt xw board setup

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 42548
---

diff --git a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
index ed2fd246ef..9413bd8c45 100644
--- a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
+++ b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
@@ -1,6 +1,8 @@
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -332,3 +332,60 @@ static void __init ubnt_uap_pro_setup(vo
+Index: linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c
+===================================================================
+--- linux-3.10.49.orig/arch/mips/ath79/mach-ubnt-xm.c	2014-08-15 22:55:37.890080659 +0200
++++ linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c	2014-08-15 22:58:31.061570912 +0200
+@@ -332,3 +332,67 @@
  MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
  	     ubnt_uap_pro_setup);
  
@@ -29,7 +31,7 @@
 +	},
 +};
 +
-+static void __init ubnt_nano_m_xw_setup(void)
++static void __init ubnt_xw_init(void)
 +{
 +	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
 +
@@ -44,26 +46,36 @@
 +	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
 +	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
 +
-+	ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
 +
 +	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
 +	ath79_init_mac(ath79_eth0_data.mac_addr,
 +		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
 +
-+	/* GMAC0 is connected to an AR8326 switch */
 +	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++}
++
++static void __init ubnt_nano_m_xw_setup(void)
++{
++	ubnt_xw_init();
++
++	/* GMAC0 is connected to an AR8326 switch */
++	ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
 +	ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
 +	ath79_eth0_data.speed = SPEED_100;
 +	ath79_eth0_data.duplex = DUPLEX_FULL;
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 +	ath79_register_eth(0);
 +}
 +
 +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
 +	     ubnt_nano_m_xw_setup);
++
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -124,6 +124,7 @@ enum ath79_mach_type {
+@@ -121,9 +121,10 @@ enum ath79_mach_type {
+ 	ATH79_MACH_TL_WR941ND,		/* TP-LINK TL-WR941ND */
+ 	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
+ 	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
  	ATH79_MACH_UBNT_LSSR71,		/* Ubiquiti LS-SR71 */
  	ATH79_MACH_UBNT_LSX,		/* Ubiquiti LSX */
  	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */