From: Michael Hennerich Date: Fri, 2 Sep 2011 16:25:27 +0000 (+0100) Subject: staging:iio:adc:ad7152: Miscellaneous fixes and touch-up X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2b8cb40c9c788929bacbd0c2fdac847e66906805;p=openwrt%2Fstaging%2Fblogic.git staging:iio:adc:ad7152: Miscellaneous fixes and touch-up Remove unused define. Introduce cached SETUP variables. Wait until calibration finished. (Device returns to idle state) IIO_CHAN_INFO_CALIBSCALE_SEPARATE use proper scales. (range 1.0 to 1.99999) i2c_smbus word transactions expect low byte first, therefore swap bytes. CAPDIFF is bit in SETUP not CFG. Signed-off-by: Michael Hennerich Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/adc/ad7152.c b/drivers/staging/iio/adc/ad7152.c index a43cf63a9edc..6b9d7eae0739 100644 --- a/drivers/staging/iio/adc/ad7152.c +++ b/drivers/staging/iio/adc/ad7152.c @@ -52,6 +52,7 @@ #define AD7152_SETUP_RANGE_0_5pF (1 << 6) #define AD7152_SETUP_RANGE_1pF (2 << 6) #define AD7152_SETUP_RANGE_4pF (3 << 6) +#define AD7152_SETUP_RANGE(x) ((x) << 6) /* Config Register Bit Designations (AD7152_REG_CFG) */ #define AD7152_CONF_CH2EN (1 << 3) @@ -66,8 +67,6 @@ #define AD7152_CAPDAC_DACEN (1 << 7) #define AD7152_CAPDAC_DACP(x) ((x) & 0x1F) -#define AD7152_MAX_CONV_MODE 6 - enum { AD7152_DATA, AD7152_OFFS, @@ -85,7 +84,8 @@ struct ad7152_chip_info { * Capacitive channel digital filter setup; * conversion time/update rate setup per channel */ - u8 filter_rate_setup; + u8 filter_rate_setup; + u8 setup[2]; }; static inline ssize_t ad7152_start_calib(struct device *dev, @@ -98,7 +98,7 @@ static inline ssize_t ad7152_start_calib(struct device *dev, struct ad7152_chip_info *chip = iio_priv(dev_info); struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); bool doit; - int ret; + int ret, timeout = 10; ret = strtobool(buf, &doit); if (ret < 0) @@ -115,8 +115,14 @@ static inline ssize_t ad7152_start_calib(struct device *dev, ret = i2c_smbus_write_byte_data(chip->client, AD7152_REG_CFG, regval); if (ret < 0) return ret; - /* Unclear on period this should be set for or whether it flips back - * to idle automatically */ + + do { + mdelay(20); + ret = i2c_smbus_read_byte_data(chip->client, AD7152_REG_CFG); + if (ret < 0) + return ret; + } while ((ret == regval) && timeout--); + return len; } static ssize_t ad7152_start_offset_calib(struct device *dev, @@ -124,7 +130,6 @@ static ssize_t ad7152_start_offset_calib(struct device *dev, const char *buf, size_t len) { - return ad7152_start_calib(dev, attr, buf, len, AD7152_CONF_MODE_OFFS_CAL); } @@ -222,11 +227,14 @@ static int ad7152_write_raw(struct iio_dev *dev_info, switch (mask) { case (1 << IIO_CHAN_INFO_CALIBSCALE_SEPARATE): - if ((val < 0) | (val > 0xFFFF)) + if (val != 1) return -EINVAL; + + val = (val2 * 1024) / 15625; + ret = i2c_smbus_write_word_data(chip->client, ad7152_addresses[chan->channel][AD7152_GAIN], - val); + swab16(val)); if (ret < 0) return ret; @@ -237,7 +245,7 @@ static int ad7152_write_raw(struct iio_dev *dev_info, return -EINVAL; ret = i2c_smbus_write_word_data(chip->client, ad7152_addresses[chan->channel][AD7152_OFFS], - val); + swab16(val)); if (ret < 0) return ret; @@ -248,14 +256,13 @@ static int ad7152_write_raw(struct iio_dev *dev_info, for (i = 0; i < ARRAY_SIZE(ad7152_scale_table); i++) if (val2 <= ad7152_scale_table[i]) break; - ret = i2c_smbus_read_byte_data(chip->client, - ad7152_addresses[chan->channel][AD7152_SETUP]); - if (ret < 0) - return ret; - if ((ret & 0xC0) != i) - ret = i2c_smbus_write_byte_data(chip->client, + + chip->setup[chan->channel] &= ~AD7152_SETUP_RANGE_4pF; + chip->setup[chan->channel] |= AD7152_SETUP_RANGE(i); + + ret = i2c_smbus_write_byte_data(chip->client, ad7152_addresses[chan->channel][AD7152_SETUP], - (ret & ~0xC0) | i); + chip->setup[chan->channel]); if (ret < 0) return ret; else @@ -275,18 +282,30 @@ static int ad7152_read_raw(struct iio_dev *dev_info, switch (mask) { case 0: /* First set whether in differential mode */ + + regval = chip->setup[chan->channel]; + if (chan->differential) - regval = AD7152_SETUP_CAPDIFF; + chip->setup[chan->channel] |= AD7152_SETUP_CAPDIFF; + else + chip->setup[chan->channel] &= ~AD7152_SETUP_CAPDIFF; + if (regval != chip->setup[chan->channel]) { + ret = i2c_smbus_write_byte_data(chip->client, + ad7152_addresses[chan->channel][AD7152_SETUP], + chip->setup[chan->channel]); + if (ret < 0) + return ret; + } /* Make sure the channel is enabled */ - if (chan->address == 0) - regval |= AD7152_CONF_CH1EN; + if (chan->channel == 0) + regval = AD7152_CONF_CH1EN; else - regval |= AD7152_CONF_CH2EN; + regval = AD7152_CONF_CH2EN; + /* Trigger a single read */ regval |= AD7152_CONF_MODE_SINGLE_CONV; - ret = i2c_smbus_write_byte_data(chip->client, - ad7152_addresses[chan->channel][AD7152_SETUP], + ret = i2c_smbus_write_byte_data(chip->client, AD7152_REG_CFG, regval); if (ret < 0) return ret; @@ -297,24 +316,26 @@ static int ad7152_read_raw(struct iio_dev *dev_info, ad7152_addresses[chan->channel][AD7152_DATA]); if (ret < 0) return ret; - *val = ret; + *val = swab16(ret); return IIO_VAL_INT; case (1 << IIO_CHAN_INFO_CALIBSCALE_SEPARATE): - /* FIXME: Hmm. very small. it's 1+ 1/(2^16 *val) */ + ret = i2c_smbus_read_word_data(chip->client, ad7152_addresses[chan->channel][AD7152_GAIN]); if (ret < 0) return ret; - *val = ret; + /* 1 + gain_val / 2^16 */ + *val = 1; + *val2 = (15625 * swab16(ret)) / 1024; - return IIO_VAL_INT; + return IIO_VAL_INT_PLUS_MICRO; case (1 << IIO_CHAN_INFO_CALIBBIAS_SEPARATE): ret = i2c_smbus_read_word_data(chip->client, ad7152_addresses[chan->channel][AD7152_OFFS]); if (ret < 0) return ret; - *val = ret; + *val = swab16(ret); return IIO_VAL_INT; case (1 << IIO_CHAN_INFO_SCALE_SEPARATE):