From: Scott Wood Date: Mon, 1 Oct 2007 19:20:57 +0000 (-0500) Subject: fs_enet: Convert mii-bitbang to use the generic bitbang MDIO code. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2b5b3a604a672be1d41728ed9e448ca3c9c23242;p=openwrt%2Fstaging%2Fblogic.git fs_enet: Convert mii-bitbang to use the generic bitbang MDIO code. Signed-off-by: Scott Wood Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c index 7cf132f0f952..b8e4a736a130 100644 --- a/drivers/net/fs_enet/mii-bitbang.c +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -15,15 +15,13 @@ #include #include #include -#include #include -#include +#include #include #include #include -#include -#include #include +#include #ifdef CONFIG_PPC_CPM_NEW_BINDING #include @@ -32,11 +30,11 @@ #include "fs_enet.h" struct bb_info { + struct mdiobb_ctrl ctrl; __be32 __iomem *dir; __be32 __iomem *dat; u32 mdio_msk; u32 mdc_msk; - int delay; }; /* FIXME: If any other users of GPIO crop up, then these will have to @@ -59,212 +57,58 @@ static inline int bb_read(u32 __iomem *p, u32 m) return (in_be32(p) & m) != 0; } -static inline void mdio_active(struct bb_info *bitbang) +static inline void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) { - bb_set(bitbang->dir, bitbang->mdio_msk); -} + struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl); -static inline void mdio_tristate(struct bb_info *bitbang) -{ - bb_clr(bitbang->dir, bitbang->mdio_msk); + if (dir) + bb_set(bitbang->dir, bitbang->mdio_msk); + else + bb_clr(bitbang->dir, bitbang->mdio_msk); + + /* Read back to flush the write. */ + in_be32(bitbang->dir); } -static inline int mdio_read(struct bb_info *bitbang) +static inline int mdio_read(struct mdiobb_ctrl *ctrl) { + struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl); return bb_read(bitbang->dat, bitbang->mdio_msk); } -static inline void mdio(struct bb_info *bitbang, int what) +static inline void mdio(struct mdiobb_ctrl *ctrl, int what) { + struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl); + if (what) bb_set(bitbang->dat, bitbang->mdio_msk); else bb_clr(bitbang->dat, bitbang->mdio_msk); + + /* Read back to flush the write. */ + in_be32(bitbang->dat); } -static inline void mdc(struct bb_info *bitbang, int what) +static inline void mdc(struct mdiobb_ctrl *ctrl, int what) { + struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl); + if (what) bb_set(bitbang->dat, bitbang->mdc_msk); else bb_clr(bitbang->dat, bitbang->mdc_msk); -} - -static inline void mii_delay(struct bb_info *bitbang) -{ - udelay(bitbang->delay); -} - -/* Utility to send the preamble, address, and register (common to read and write). */ -static void bitbang_pre(struct bb_info *bitbang , int read, u8 addr, u8 reg) -{ - int j; - - /* - * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure. - * The IEEE spec says this is a PHY optional requirement. The AMD - * 79C874 requires one after power up and one after a MII communications - * error. This means that we are doing more preambles than we need, - * but it is safer and will be much more robust. - */ - - mdio_active(bitbang); - mdio(bitbang, 1); - for (j = 0; j < 32; j++) { - mdc(bitbang, 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - } - - /* send the start bit (01) and the read opcode (10) or write (10) */ - mdc(bitbang, 0); - mdio(bitbang, 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - mdc(bitbang, 0); - mdio(bitbang, 1); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - mdc(bitbang, 0); - mdio(bitbang, read); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - mdc(bitbang, 0); - mdio(bitbang, !read); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - - /* send the PHY address */ - for (j = 0; j < 5; j++) { - mdc(bitbang, 0); - mdio(bitbang, (addr & 0x10) != 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - addr <<= 1; - } - /* send the register address */ - for (j = 0; j < 5; j++) { - mdc(bitbang, 0); - mdio(bitbang, (reg & 0x10) != 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - reg <<= 1; - } + /* Read back to flush the write. */ + in_be32(bitbang->dat); } -static int fs_enet_mii_bb_read(struct mii_bus *bus , int phy_id, int location) -{ - u16 rdreg; - int ret, j; - u8 addr = phy_id & 0xff; - u8 reg = location & 0xff; - struct bb_info* bitbang = bus->priv; - - bitbang_pre(bitbang, 1, addr, reg); - - /* tri-state our MDIO I/O pin so we can read */ - mdc(bitbang, 0); - mdio_tristate(bitbang); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - - /* check the turnaround bit: the PHY should be driving it to zero */ - if (mdio_read(bitbang) != 0) { - /* PHY didn't drive TA low */ - for (j = 0; j < 32; j++) { - mdc(bitbang, 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - } - ret = -1; - goto out; - } - - mdc(bitbang, 0); - mii_delay(bitbang); - - /* read 16 bits of register data, MSB first */ - rdreg = 0; - for (j = 0; j < 16; j++) { - mdc(bitbang, 1); - mii_delay(bitbang); - rdreg <<= 1; - rdreg |= mdio_read(bitbang); - mdc(bitbang, 0); - mii_delay(bitbang); - } - - mdc(bitbang, 1); - mii_delay(bitbang); - mdc(bitbang, 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - - ret = rdreg; -out: - return ret; -} - -static int fs_enet_mii_bb_write(struct mii_bus *bus, int phy_id, int location, u16 val) -{ - int j; - struct bb_info* bitbang = bus->priv; - - u8 addr = phy_id & 0xff; - u8 reg = location & 0xff; - u16 value = val & 0xffff; - - bitbang_pre(bitbang, 0, addr, reg); - - /* send the turnaround (10) */ - mdc(bitbang, 0); - mdio(bitbang, 1); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - mdc(bitbang, 0); - mdio(bitbang, 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - - /* write 16 bits of register data, MSB first */ - for (j = 0; j < 16; j++) { - mdc(bitbang, 0); - mdio(bitbang, (value & 0x8000) != 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - value <<= 1; - } - - /* - * Tri-state the MDIO line. - */ - mdio_tristate(bitbang); - mdc(bitbang, 0); - mii_delay(bitbang); - mdc(bitbang, 1); - mii_delay(bitbang); - return 0; -} - -static int fs_enet_mii_bb_reset(struct mii_bus *bus) -{ - /*nothing here - dunno how to reset it*/ - return 0; -} +static struct mdiobb_ops bb_ops = { + .owner = THIS_MODULE, + .set_mdc = mdc, + .set_mdio_dir = mdio_dir, + .set_mdio_data = mdio, + .get_mdio_data = mdio_read, +}; #ifdef CONFIG_PPC_CPM_NEW_BINDING static int __devinit fs_mii_bitbang_init(struct mii_bus *bus, @@ -305,7 +149,6 @@ static int __devinit fs_mii_bitbang_init(struct mii_bus *bus, bitbang->dat = bitbang->dir + 4; bitbang->mdio_msk = 1 << (31 - mdio_pin); bitbang->mdc_msk = 1 << (31 - mdc_pin); - bitbang->delay = 1; /* 1 us between operations */ return 0; } @@ -336,23 +179,21 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev, int ret = -ENOMEM; int i; - new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); - if (!new_bus) - goto out; - bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL); if (!bitbang) - goto out_free_bus; + goto out; + + bitbang->ctrl.ops = &bb_ops; + + new_bus = alloc_mdio_bitbang(&bitbang->ctrl); + if (!new_bus) + goto out_free_priv; - new_bus->priv = bitbang; new_bus->name = "CPM2 Bitbanged MII", - new_bus->read = &fs_enet_mii_bb_read, - new_bus->write = &fs_enet_mii_bb_write, - new_bus->reset = &fs_enet_mii_bb_reset, ret = fs_mii_bitbang_init(new_bus, ofdev->node); if (ret) - goto out_free_bitbang; + goto out_free_bus; new_bus->phy_mask = ~0; new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); @@ -380,10 +221,10 @@ out_free_irqs: kfree(new_bus->irq); out_unmap_regs: iounmap(bitbang->dir); -out_free_bitbang: - kfree(bitbang); out_free_bus: kfree(new_bus); +out_free_priv: + free_mdio_bitbang(new_bus); out: return ret; } @@ -394,6 +235,7 @@ static int fs_enet_mdio_remove(struct of_device *ofdev) struct bb_info *bitbang = bus->priv; mdiobus_unregister(bus); + free_mdio_bitbang(bus); dev_set_drvdata(&ofdev->dev, NULL); kfree(bus->irq); iounmap(bitbang->dir); @@ -417,12 +259,12 @@ static struct of_platform_driver fs_enet_bb_mdio_driver = { .remove = fs_enet_mdio_remove, }; -int fs_enet_mdio_bb_init(void) +static int fs_enet_mdio_bb_init(void) { return of_register_platform_driver(&fs_enet_bb_mdio_driver); } -void fs_enet_mdio_bb_exit(void) +static void fs_enet_mdio_bb_exit(void) { of_unregister_platform_driver(&fs_enet_bb_mdio_driver); } @@ -437,7 +279,6 @@ static int __devinit fs_mii_bitbang_init(struct bb_info *bitbang, bitbang->dat = (u32 __iomem *)fmpi->mdio_dat.offset; bitbang->mdio_msk = 1U << (31 - fmpi->mdio_dat.bit); bitbang->mdc_msk = 1U << (31 - fmpi->mdc_dat.bit); - bitbang->delay = fmpi->delay; return 0; } @@ -453,20 +294,19 @@ static int __devinit fs_enet_mdio_probe(struct device *dev) if (NULL == dev) return -EINVAL; - new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL); - if (NULL == new_bus) + if (NULL == bitbang) return -ENOMEM; - bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL); + bitbang->ctrl.ops = &bb_ops; - if (NULL == bitbang) + new_bus = alloc_mdio_bitbang(&bitbang->ctrl); + + if (NULL == new_bus) return -ENOMEM; new_bus->name = "BB MII Bus", - new_bus->read = &fs_enet_mii_bb_read, - new_bus->write = &fs_enet_mii_bb_write, - new_bus->reset = &fs_enet_mii_bb_reset, new_bus->id = pdev->id; new_bus->phy_mask = ~0x9; @@ -498,8 +338,8 @@ static int __devinit fs_enet_mdio_probe(struct device *dev) return 0; bus_register_fail: + free_mdio_bitbang(new_bus); kfree(bitbang); - kfree(new_bus); return err; } @@ -512,9 +352,7 @@ static int fs_enet_mdio_remove(struct device *dev) dev_set_drvdata(dev, NULL); - iounmap((void *) (&bus->priv)); - bus->priv = NULL; - kfree(bus); + free_mdio_bitbang(bus); return 0; } @@ -535,4 +373,4 @@ void fs_enet_mdio_bb_exit(void) { driver_unregister(&fs_enet_bb_mdio_driver); } - +#endif