From: Denys Vlasenko Date: Tue, 1 Apr 2008 00:56:32 +0000 (+0200) Subject: wavelan_cs: stop inlining largish static functions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2aee82de5238625a7664f88d6ebff9de467bb685;p=openwrt%2Fstaging%2Fblogic.git wavelan_cs: stop inlining largish static functions Hi John, Can you please take a look at this patch? drivers/net/wireless/wavelan_cs.c has unusually large number of static inline functions - 27. I looked through them and 20 of them do not seem to warrant inlining. Some are really big; others call mdelay(1) or busy-wait for a bit to be set in a hardware register - it's pointless to optimize such functions for speed. This patch removes "inline" from these static function (regardless of number of callsites - gcc nowadays auto-inlines statics with one callsite). Size difference for 32bit x86: text data bss dec hex filename 17020 372 8 17400 43f8 linux-2.6-ALLYES/drivers/net/wireless/wavelan_cs.o 14032 356 8 14396 383c linux-2.6.inline-ALLYES/drivers/net/wireless/wavelan_cs.o Signed-off-by: Denys Vlasenko -- vda Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 06eea6ab7bf0..baf74015751c 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -102,7 +102,7 @@ hacr_write(u_long base, * Write to card's Host Adapter Command Register. Include a delay for * those times when it is needed. */ -static inline void +static void hacr_write_slow(u_long base, u_char hacr) { @@ -255,7 +255,7 @@ update_psa_checksum(struct net_device * dev) /* * Write 1 byte to the MMC. */ -static inline void +static void mmc_out(u_long base, u_short o, u_char d) @@ -275,7 +275,7 @@ mmc_out(u_long base, * Routine to write bytes to the Modem Management Controller. * We start by the end because it is the way it should be ! */ -static inline void +static void mmc_write(u_long base, u_char o, u_char * b, @@ -293,7 +293,7 @@ mmc_write(u_long base, * Read 1 byte from the MMC. * Optimised version for 1 byte, avoid using memory... */ -static inline u_char +static u_char mmc_in(u_long base, u_short o) { @@ -318,7 +318,7 @@ mmc_in(u_long base, * (code has just been moved in the above function) * We start by the end because it is the way it should be ! */ -static inline void +static void mmc_read(u_long base, u_char o, u_char * b, @@ -350,9 +350,8 @@ mmc_encr(u_long base) /* i/o port of the card */ /*------------------------------------------------------------------*/ /* * Wait for the frequency EEprom to complete a command... - * I hope this one will be optimally inlined... */ -static inline void +static void fee_wait(u_long base, /* i/o port of the card */ int delay, /* Base delay to wait for */ int number) /* Number of time to wait */ @@ -738,9 +737,9 @@ static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp) } /* Called when a WavePoint beacon is received */ -static inline void wl_roam_gather(struct net_device * dev, - u_char * hdr, /* Beacon header */ - u_char * stats) /* SNR, Signal quality +static void wl_roam_gather(struct net_device * dev, + u_char * hdr, /* Beacon header */ + u_char * stats) /* SNR, Signal quality of packet */ { wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */ @@ -794,7 +793,7 @@ out: static inline int WAVELAN_BEACON(unsigned char *data) { wavepoint_beacon *beacon= (wavepoint_beacon *)data; - static wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00}; + static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00}; if(memcmp(beacon,&beacon_template,9)==0) return 1; @@ -980,7 +979,7 @@ read_ringbuf(struct net_device * dev, * wavelan_interrupt is not an option...), so you may experience * some delay sometime... */ -static inline void +static void wv_82593_reconfig(struct net_device * dev) { net_local * lp = netdev_priv(dev); @@ -1233,7 +1232,7 @@ wv_local_show(struct net_device * dev) /* * Dump packet header (and content if necessary) on the screen */ -static inline void +static void wv_packet_info(u_char * p, /* Packet to dump */ int length, /* Length of the packet */ char * msg1, /* Name of the device */ @@ -1272,7 +1271,7 @@ wv_packet_info(u_char * p, /* Packet to dump */ * This is the information which is displayed by the driver at startup * There is a lot of flag to configure it at your will... */ -static inline void +static void wv_init_info(struct net_device * dev) { unsigned int base = dev->base_addr; @@ -1509,7 +1508,7 @@ wavelan_set_mac_address(struct net_device * dev, * Frequency setting (for hardware able of it) * It's a bit complicated and you don't really want to look into it... */ -static inline int +static int wv_set_frequency(u_long base, /* i/o port of the card */ iw_freq * frequency) { @@ -1706,7 +1705,7 @@ wv_set_frequency(u_long base, /* i/o port of the card */ /* * Give the list of available frequencies */ -static inline int +static int wv_frequency_list(u_long base, /* i/o port of the card */ iw_freq * list, /* List of frequency to fill */ int max) /* Maximum number of frequencies */ @@ -2759,7 +2758,7 @@ wavelan_get_wireless_stats(struct net_device * dev) * frame pointer and verify that the frame seem correct * (called by wv_packet_rcv()) */ -static inline int +static int wv_start_of_frame(struct net_device * dev, int rfp, /* end of frame */ int wrap) /* start of buffer */ @@ -2821,7 +2820,7 @@ wv_start_of_frame(struct net_device * dev, * Note: if any errors occur, the packet is "dropped on the floor" * (called by wv_packet_rcv()) */ -static inline void +static void wv_packet_read(struct net_device * dev, int fd_p, int sksize) @@ -2922,7 +2921,7 @@ wv_packet_read(struct net_device * dev, * (called by wavelan_interrupt()) * Note : the spinlock is already grabbed for us and irq are disabled. */ -static inline void +static void wv_packet_rcv(struct net_device * dev) { unsigned int base = dev->base_addr; @@ -3056,7 +3055,7 @@ wv_packet_rcv(struct net_device * dev) * the transmit. * (called in wavelan_packet_xmit()) */ -static inline void +static void wv_packet_write(struct net_device * dev, void * buf, short length) @@ -3180,7 +3179,7 @@ wavelan_packet_xmit(struct sk_buff * skb, * Routine to initialize the Modem Management Controller. * (called by wv_hw_config()) */ -static inline int +static int wv_mmc_init(struct net_device * dev) { unsigned int base = dev->base_addr; @@ -3699,7 +3698,7 @@ wv_82593_config(struct net_device * dev) * wavelan. * (called by wv_config()) */ -static inline int +static int wv_pcmcia_reset(struct net_device * dev) { int i; @@ -3864,7 +3863,7 @@ wv_hw_config(struct net_device * dev) * 2. Start the LAN controller's receive unit * (called by wavelan_event(), wavelan_watchdog() and wavelan_open()) */ -static inline void +static void wv_hw_reset(struct net_device * dev) { net_local * lp = netdev_priv(dev); @@ -3895,7 +3894,7 @@ wv_hw_reset(struct net_device * dev) * device available to the system. * (called by wavelan_event()) */ -static inline int +static int wv_pcmcia_config(struct pcmcia_device * link) { struct net_device * dev = (struct net_device *) link->priv; diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h index 33dd97094227..628192d7248f 100644 --- a/drivers/net/wireless/wavelan_cs.p.h +++ b/drivers/net/wireless/wavelan_cs.p.h @@ -637,7 +637,7 @@ struct net_local /* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ static inline u_char /* data */ hasr_read(u_long); /* Read the host interface : base address */ -static inline void +static void hacr_write(u_long, /* Write to host interface : base address */ u_char), /* data */ hacr_write_slow(u_long, @@ -651,7 +651,7 @@ static void int, /* Offset in psa */ u_char *, /* Buffer in memory */ int); /* Length of buffer */ -static inline void +static void mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */ u_short, u_char), @@ -659,10 +659,10 @@ static inline void u_char, u_char *, int); -static inline u_char /* Read 1 byte from the MMC */ +static u_char /* Read 1 byte from the MMC */ mmc_in(u_long, u_short); -static inline void +static void mmc_read(u_long, /* Read n bytes from the MMC */ u_char, u_char *, @@ -688,10 +688,10 @@ static int int, char *, int); -static inline void +static void wv_82593_reconfig(struct net_device *); /* Reconfigure the controller */ /* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ -static inline void +static void wv_init_info(struct net_device *); /* display startup info */ /* ------------------- IOCTL, STATS & RECONFIG ------------------- */ static en_stats * @@ -699,17 +699,17 @@ static en_stats * static iw_stats * wavelan_get_wireless_stats(struct net_device *); /* ----------------------- PACKET RECEPTION ----------------------- */ -static inline int +static int wv_start_of_frame(struct net_device *, /* Seek beggining of current frame */ int, /* end of frame */ int); /* start of buffer */ -static inline void +static void wv_packet_read(struct net_device *, /* Read a packet from a frame */ int, int), wv_packet_rcv(struct net_device *); /* Read all packets waiting */ /* --------------------- PACKET TRANSMISSION --------------------- */ -static inline void +static void wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer */ void *, short); @@ -717,20 +717,20 @@ static int wavelan_packet_xmit(struct sk_buff *, /* Send a packet */ struct net_device *); /* -------------------- HARDWARE CONFIGURATION -------------------- */ -static inline int +static int wv_mmc_init(struct net_device *); /* Initialize the modem */ static int wv_ru_stop(struct net_device *), /* Stop the i82593 receiver unit */ wv_ru_start(struct net_device *); /* Start the i82593 receiver unit */ static int wv_82593_config(struct net_device *); /* Configure the i82593 */ -static inline int +static int wv_pcmcia_reset(struct net_device *); /* Reset the pcmcia interface */ static int wv_hw_config(struct net_device *); /* Reset & configure the whole hardware */ -static inline void +static void wv_hw_reset(struct net_device *); /* Same, + start receiver unit */ -static inline int +static int wv_pcmcia_config(struct pcmcia_device *); /* Configure the pcmcia interface */ static void wv_pcmcia_release(struct pcmcia_device *);/* Remove a device */