From: NeilBrown Date: Thu, 29 May 2014 01:40:03 +0000 (+1000) Subject: md: always set MD_RECOVERY_INTR when interrupting a reshape thread. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2ac295a544dcae9299cba13ce250419117ae7fd1;p=openwrt%2Fstaging%2Fblogic.git md: always set MD_RECOVERY_INTR when interrupting a reshape thread. Commit 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97 md: fix problem when adding device to read-only array with bitmap. added a called to md_reap_sync_thread() which cause a reshape thread to be interrupted (in particular, it could cause md_thread() to never even call md_do_sync()). However it didn't set MD_RECOVERY_INTR so ->finish_reshape() would not know that the reshape didn't complete. This only happens when mddev->ro is set and normally reshape threads don't run in that situation. But raid5 and raid10 can start a reshape thread during "run" is the array is in the middle of a reshape. They do this even if ->ro is set. So it is best to set MD_RECOVERY_INTR before abortingg the sync thread, just in case. Though it rare for this to trigger a problem it can cause data corruption because the reshape isn't finished properly. So it is suitable for any stable which the offending commit was applied to. (3.2 or later) Fixes: 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97 Cc: stable@vger.kernel.org (3.2+) Signed-off-by: NeilBrown --- diff --git a/drivers/md/md.c b/drivers/md/md.c index 48a99b75682c..2382cfc9bb3f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7826,6 +7826,7 @@ void md_check_recovery(struct mddev *mddev) /* There is no thread, but we need to call * ->spare_active and clear saved_raid_disk */ + set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_reap_sync_thread(mddev); clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); goto unlock;