From: Tony Ambardar Date: Tue, 6 Dec 2022 03:44:32 +0000 (-0800) Subject: ipq40xx: fix up Linksys WHW01 board name, device definition X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2a9f3b7717d081a9d6cb34d7ad04e14b4e50d69e;p=openwrt%2Fstaging%2Frobimarko.git ipq40xx: fix up Linksys WHW01 board name, device definition Update the board name defined in DTS to match online documentation and the name encoded into factory firmware. This helps supports flashing firmware factory images using 'sysupgrade'. Original WHW01 device definition assumes the rootfs IMAGE_SIZE is 33 MB instead of the correct 74 MB, and defines factory images which include extra adjustments/padding that do not match OEM factory images and may cause problems flashing. Update image size and build recipe to fix these. Suggested-by: Wyatt Martin Signed-off-by: Tony Ambardar --- diff --git a/package/boot/uboot-envtools/files/ipq40xx b/package/boot/uboot-envtools/files/ipq40xx index 4ee83bb057..6c65ed752d 100644 --- a/package/boot/uboot-envtools/files/ipq40xx +++ b/package/boot/uboot-envtools/files/ipq40xx @@ -63,7 +63,7 @@ linksys,ea8300|\ linksys,mr8300) ubootenv_add_uci_config "/dev/mtd7" "0x0" "0x40000" "0x20000" ;; -linksys,whw01-v1) +linksys,whw01) ubootenv_add_uci_config "/dev/mtd6" "0x0" "0x40000" "0x10000" ;; zyxel,nbg6617) diff --git a/target/linux/ipq40xx/base-files/etc/init.d/bootcount b/target/linux/ipq40xx/base-files/etc/init.d/bootcount index 367ccfcd0c..6acebcef6e 100755 --- a/target/linux/ipq40xx/base-files/etc/init.d/bootcount +++ b/target/linux/ipq40xx/base-files/etc/init.d/bootcount @@ -11,7 +11,7 @@ boot() { linksys,ea6350v3|\ linksys,ea8300|\ linksys,mr8300|\ - linksys,whw01-v1) + linksys,whw01) mtd resetbc s_env || true ;; netgear,wac510) diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index 12fa9699c5..73feefb3ea 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -164,7 +164,7 @@ platform_do_upgrade() { linksys,ea6350v3 |\ linksys,ea8300 |\ linksys,mr8300 |\ - linksys,whw01-v1) + linksys,whw01) platform_do_upgrade_linksys "$1" ;; meraki,mr33 |\ diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-whw01-v1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-whw01-v1.dts deleted file mode 100644 index 8ca57a0e85..0000000000 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-whw01-v1.dts +++ /dev/null @@ -1,318 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Linksys WHW01 v1"; - compatible = "linksys,whw01-v1"; - - aliases { - serial0 = &blsp1_uart1; - led-boot = &led_system_blue; - led-running = &led_system_blue; - }; - - chosen { - stdout-path = "serial0:115200n8"; - bootargs-append = " root=/dev/ubiblock0_0"; - }; - - soc { - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - ess_tcsr@1953000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - status = "okay"; - pinctrl-0 = <&i2c_0_pins>; - pinctrl-1 = <&i2c_0_pins>; - pinctrl-names = "i2c_active", "i2c_sleep"; - - leds@62 { - compatible = "nxp,pca9633"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x62>; - - /* RGB? */ - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_POWER; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_POWER; - }; - - led_system_blue: led@2 { - reg = <2>; - color = ; - function = LED_FUNCTION_POWER; - linux,default-trigger = "default-on"; - }; - }; -}; - -&blsp1_spi1 { - status = "okay"; - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; - - nor@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "APPSBL"; - reg = <0xd0000 0xa0000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - - partition@180000 { - label = "u_env"; - reg = <0x180000 0x40000>; - }; - - partition@1c0000 { - label = "s_env"; - reg = <0x1c0000 0x20000>; - }; - - partition@1e0000 { - label = "devinfo"; - reg = <0x1e0000 0x20000>; - read-only; - }; - }; - }; - - nand@1 { - reg = <1>; - compatible = "spi-nand"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0000000 0x5000000>; - }; - - partition@600000 { - label = "rootfs"; - reg = <0x0600000 0x4a00000>; - }; - - partition@5000000 { - label = "alt_kernel"; - reg = <0x5000000 0x5000000>; - }; - - partition@5600000 { - label = "alt_rootfs"; - reg = <0x5600000 0x4a00000>; - }; - - partition@a000000 { - label = "sysdiag"; - reg = <0xa000000 0x0200000>; - read-only; - }; - - partition@a200000 { - label = "syscfg"; - reg = <0xa200000 0x5e00000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy-reset-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_mdio { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_mdc { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio4"; - }; - - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pinconf_cs { - pins = "gpio54", "gpio4"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - bias-disable; - }; - }; - - reset_pinmux { - mux { - pins = "gpio63"; - bias-pull-up; - }; - }; -}; - -&usb2 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-whw01-v1"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-whw01-v1"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-whw01.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-whw01.dts new file mode 100644 index 0000000000..09349219ed --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-whw01.dts @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Linksys WHW01"; + compatible = "linksys,whw01"; + + aliases { + serial0 = &blsp1_uart1; + led-boot = &led_system_blue; + led-running = &led_system_blue; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " root=/dev/ubiblock0_0"; + }; + + soc { + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + ess_tcsr@1953000 { + status = "okay"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_i2c3 { + status = "okay"; + pinctrl-0 = <&i2c_0_pins>; + pinctrl-1 = <&i2c_0_pins>; + pinctrl-names = "i2c_active", "i2c_sleep"; + + leds@62 { + compatible = "nxp,pca9633"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x62>; + + /* RGB? */ + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_POWER; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_POWER; + }; + + led_system_blue: led@2 { + reg = <2>; + color = ; + function = LED_FUNCTION_POWER; + linux,default-trigger = "default-on"; + }; + }; +}; + +&blsp1_spi1 { + status = "okay"; + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; + + nor@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "0:MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "0:QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + + partition@c0000 { + label = "0:CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + + partition@d0000 { + label = "APPSBL"; + reg = <0xd0000 0xa0000>; + read-only; + }; + + partition@170000 { + label = "0:ART"; + reg = <0x170000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; + }; + + partition@180000 { + label = "u_env"; + reg = <0x180000 0x40000>; + }; + + partition@1c0000 { + label = "s_env"; + reg = <0x1c0000 0x20000>; + }; + + partition@1e0000 { + label = "devinfo"; + reg = <0x1e0000 0x20000>; + read-only; + }; + }; + }; + + nand@1 { + reg = <1>; + compatible = "spi-nand"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0000000 0x5000000>; + }; + + partition@600000 { + label = "rootfs"; + reg = <0x0600000 0x4a00000>; + }; + + partition@5000000 { + label = "alt_kernel"; + reg = <0x5000000 0x5000000>; + }; + + partition@5600000 { + label = "alt_rootfs"; + reg = <0x5600000 0x4a00000>; + }; + + partition@a000000 { + label = "sysdiag"; + reg = <0xa000000 0x0200000>; + read-only; + }; + + partition@a200000 { + label = "syscfg"; + reg = <0xa200000 0x5e00000>; + read-only; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mdio { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy-reset-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_mdio { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + + mux_mdc { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio54", "gpio4"; + }; + + pinconf { + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + pinconf_cs { + pins = "gpio54", "gpio4"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + mux { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + bias-disable; + }; + }; + + reset_pinmux { + mux { + pins = "gpio63"; + bias-pull-up; + }; + }; +}; + +&usb2 { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "linksys-whw01-v1"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "linksys-whw01-v1"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; +}; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index e17db37d82..a2807c6c9c 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -720,25 +720,22 @@ define Device/linksys_mr8300 endef TARGET_DEVICES += linksys_mr8300 -define Device/linksys_whw01-v1 +define Device/linksys_whw01 $(call Device/FitzImage) DEVICE_VENDOR := Linksys DEVICE_MODEL := WHW01 - DEVICE_VARIANT := v1 KERNEL_SIZE := 6144k - IMAGE_SIZE := 28704512 # 28032k minus linksys signature (256-bytes). + IMAGE_SIZE := 75776K SOC := qcom-ipq4018 BLOCKSIZE := 128k PAGESIZE := 2048 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF IMAGES += factory.bin - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ - append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \ - check-size + IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01 DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x endef # Missing DSA Setup -#TARGET_DEVICES += linksys_whw01-v1 +#TARGET_DEVICES += linksys_whw01 define Device/luma_wrtq-329acn $(call Device/FitImage)