From: Abhijeet Kolekar Date: Sat, 28 Feb 2009 00:21:23 +0000 (-0800) Subject: iwl3945: add iwl3945_setup_mac X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2a4ddaabe0055962fbfffb72633a97eadc7e93ac;p=openwrt%2Fstaging%2Fblogic.git iwl3945: add iwl3945_setup_mac Patch does following, 1) mac80211's shared data is now initialized in iwl3945_setup_mac. 2) Set the rfkill to right state after initialization Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 2d47e9a8c329..da020c356898 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -5008,19 +5008,53 @@ static int iwl3945_init_drv(struct iwl_priv *priv) } iwl3945_init_hw_rates(priv, priv->ieee_rates); + return 0; + +err_free_channel_map: + iwl_free_channel_map(priv); +err: + return ret; +} + +static int iwl3945_setup_mac(struct iwl_priv *priv) +{ + int ret; + struct ieee80211_hw *hw = priv->hw; + + hw->rate_control_algorithm = "iwl-3945-rs"; + hw->sta_data_size = sizeof(struct iwl3945_sta_priv); + + /* Tell mac80211 our characteristics */ + hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_NOISE_DBM; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + + hw->wiphy->custom_regulatory = true; + + /* Default value; 4 EDCA QOS priorities */ + hw->queues = 4; + + hw->conf.beacon_int = 100; + if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->bands[IEEE80211_BAND_2GHZ]; + if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &priv->bands[IEEE80211_BAND_5GHZ]; - return 0; + ret = ieee80211_register_hw(priv->hw); + if (ret) { + IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); + return ret; + } + priv->mac80211_registered = 1; -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; + return 0; } static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -5074,23 +5108,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e priv->debug_level = iwl3945_mod_params.debug; atomic_set(&priv->restrict_refcnt, 0); #endif - hw->rate_control_algorithm = "iwl-3945-rs"; - hw->sta_data_size = sizeof(struct iwl3945_sta_priv); - - /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; - - hw->wiphy->interface_modes = - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); - - hw->wiphy->custom_regulatory = true; - - hw->wiphy->max_scan_ssids = 1; - - /* 4 EDCA QOS priorities */ - hw->queues = 4; /*************************** * 2. Initializing PCI bus @@ -5221,19 +5238,18 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * 9. Setup and Register mac80211 * *******************************/ - err = ieee80211_register_hw(priv->hw); - if (err) { - IWL_ERR(priv, "Failed to register network device: %d\n", err); - goto out_remove_sysfs; - } + iwl_enable_interrupts(priv); - priv->hw->conf.beacon_int = 100; - priv->mac80211_registered = 1; + err = iwl3945_setup_mac(priv); + if (err) + goto out_remove_sysfs; err = iwl_rfkill_init(priv); if (err) IWL_ERR(priv, "Unable to initialize RFKILL system. " "Ignoring error: %d\n", err); + else + iwl_rfkill_set_hw_state(priv); /* Start monitoring the killswitch */ queue_delayed_work(priv->workqueue, &priv->rfkill_poll,