From: Roberto Vargas Date: Tue, 12 Dec 2017 10:39:44 +0000 (+0000) Subject: Add documentation about plat_try_next_boot_source to bl1_platform_setup X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2a350dffedf2b8c2c33a2664afd4e59568a1070c;p=project%2Fbcm63xx%2Fatf.git Add documentation about plat_try_next_boot_source to bl1_platform_setup If boot redundancy is required in BL1 then the initialization of the boot sequence must be done in bl1_platform_setup. In BL2, we had to add a new function, bl2_preload_setup, because bl2_platform_setup is called after the images are loaded, making it invalid for the boot sequence initialization. Change-Id: I5c177ff142608ed38b4192288b06614343b2b83b Signed-off-by: Roberto Vargas --- diff --git a/docs/porting-guide.rst b/docs/porting-guide.rst index f020ec97..402cc5d3 100644 --- a/docs/porting-guide.rst +++ b/docs/porting-guide.rst @@ -1128,6 +1128,9 @@ This function executes with the MMU and data caches enabled. It is responsible for performing any remaining platform-specific setup that can occur after the MMU and data cache have been enabled. +if support for multiple boot sources is required, it initializes the boot +sequence used by plat\_try\_next\_boot\_source(). + In ARM standard platforms, this function initializes the storage abstraction layer used to load the next bootloader image.