From: Ansuel Smith Date: Sat, 20 Nov 2021 22:06:34 +0000 (+0100) Subject: ipq40xx: 5:15: refresh patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=29e177e4ee7260b16350660d7d94dc333931c46a;p=openwrt%2Fstaging%2Frmilecki.git ipq40xx: 5:15: refresh patches - Drop upstream patch - Refresh dts patch Signed-off-by: Ansuel Smith --- diff --git a/target/linux/ipq40xx/patches-5.15/0001-v5.12-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.15/0001-v5.12-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch deleted file mode 100644 index 890611387c2..00000000000 --- a/target/linux/ipq40xx/patches-5.15/0001-v5.12-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ /dev/null @@ -1,99 +0,0 @@ -From b8afc254b40167fd37b4d4263e750dab1f9ef157 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Wed, 9 Sep 2020 18:38:31 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes - -Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI. - -Signed-off-by: John Crispin -Signed-off-by: Robert Marko -Cc: Luka Perkov -Reviewed-by: Vinod Koul -Link: https://lore.kernel.org/r/20200909163831.1894142-1-robert.marko@sartura.hr -Signed-off-by: Bjorn Andersson ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++ - 1 file changed, 74 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -605,5 +605,79 @@ - reg = <4>; - }; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ compatible = "qcom,usb-ss-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0x9a000 0x800>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_UNIPHY_PHY_ARES>; -+ reset-names = "por_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa6000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x8af8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB3_MASTER_CLK>, -+ <&gcc GCC_USB3_SLEEP_CLK>, -+ <&gcc GCC_USB3_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x8a00000 0xf8000>; -+ interrupts = ; -+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ }; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x60f8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB2_MASTER_CLK>, -+ <&gcc GCC_USB2_SLEEP_CLK>, -+ <&gcc GCC_USB2_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@6000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x6000000 0xf8000>; -+ interrupts = ; -+ phys = <&usb2_hs_phy>; -+ phy-names = "usb2-phy"; -+ dr_mode = "host"; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq40xx/patches-5.15/0002-v5.12-ARM-dts-qcom-ipq4019-add-more-labels.patch b/target/linux/ipq40xx/patches-5.15/0002-v5.12-ARM-dts-qcom-ipq4019-add-more-labels.patch deleted file mode 100644 index d623a9c7b30..00000000000 --- a/target/linux/ipq40xx/patches-5.15/0002-v5.12-ARM-dts-qcom-ipq4019-add-more-labels.patch +++ /dev/null @@ -1,44 +0,0 @@ -From d1ae4c808e7802008225078d93fbadd4aeea1e2d Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 9 Sep 2020 21:56:37 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add more labels - -Lets add labels to more commonly used nodes for easier modification in board DTS files. - -Signed-off-by: Robert Marko -Cc: Luka Perkov -Link: https://lore.kernel.org/r/20200909195640.3127341-2-robert.marko@sartura.hr -Signed-off-by: Bjorn Andersson ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -190,7 +190,7 @@ - reg = <0x1800000 0x60000>; - }; - -- rng@22000 { -+ prng: rng@22000 { - compatible = "qcom,prng"; - reg = <0x22000 0x140>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; -@@ -300,7 +300,7 @@ - status = "disabled"; - }; - -- crypto@8e3a000 { -+ crypto: crypto@8e3a000 { - compatible = "qcom,crypto-v5.1"; - reg = <0x08e3a000 0x6000>; - clocks = <&gcc GCC_CRYPTO_AHB_CLK>, -@@ -386,7 +386,7 @@ - dma-names = "rx", "tx"; - }; - -- watchdog@b017000 { -+ watchdog: watchdog@b017000 { - compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; - reg = <0xb017000 0x40>; - clocks = <&sleep_clk>; diff --git a/target/linux/ipq40xx/patches-5.15/0003-v5.12-ARM-dts-qcom-ipq4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-5.15/0003-v5.12-ARM-dts-qcom-ipq4019-add-SDHCI-VQMMC-LDO-node.patch deleted file mode 100644 index 1d93fb800a5..00000000000 --- a/target/linux/ipq40xx/patches-5.15/0003-v5.12-ARM-dts-qcom-ipq4019-add-SDHCI-VQMMC-LDO-node.patch +++ /dev/null @@ -1,35 +0,0 @@ -From e14775aa2feac18e7378cb8009b55c13d4236b50 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 7 Sep 2020 12:19:37 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node - -Since we now have driver for the SDHCI VQMMC LDO needed -for I/0 voltage levels lets introduce the necessary node for it. - -Signed-off-by: Robert Marko -Cc: Luka Perkov -Link: https://lore.kernel.org/r/20200907101937.10155-1-robert.marko@sartura.hr -Signed-off-by: Bjorn Andersson ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -209,6 +209,16 @@ - interrupts = ; - }; - -+ vqmmc: regulator@1948000 { -+ compatible = "qcom,vqmmc-ipq4019-regulator"; -+ reg = <0x01948000 0x4>; -+ regulator-name = "vqmmc"; -+ regulator-min-microvolt = <1500000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-always-on; -+ status = "disabled"; -+ }; -+ - sdhci: sdhci@7824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x11c>, <0x7824000 0x800>; diff --git a/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch index a6a082a2c8a..671df84c59f 100644 --- a/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch @@ -10,10 +10,10 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -903,11 +903,76 @@ dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8074-dragonboard.dtb \ - qcom-apq8084-ifc6540.dtb \ - qcom-apq8084-mtp.dtb \ +@@ -902,11 +902,65 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-ipq4018-ap120c-ac.dtb \ + qcom-ipq4018-ap120c-ac-bit.dtb \ + qcom-ipq4018-jalapeno.dtb \ + qcom-ipq4018-a42.dtb \ + qcom-ipq4018-ap120c-ac.dtb \ + qcom-ipq4018-dap-2610.dtb \ @@ -29,7 +29,6 @@ Signed-off-by: John Crispin + qcom-ipq4018-ex6150v2.dtb \ + qcom-ipq4018-fritzbox-4040.dtb \ + qcom-ipq4018-gl-ap1300.dtb \ -+ qcom-ipq4018-jalapeno.dtb \ + qcom-ipq4018-meshpoint-one.dtb \ + qcom-ipq4018-cap-ac.dtb \ + qcom-ipq4018-hap-ac2.dtb \