From: Karl Palsson <karlp@etactica.com>
Date: Mon, 28 May 2018 12:46:52 +0000 (+0000)
Subject: ath79: buffalo_wzr-hp-g450h: fix dtc warnings
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=29b2804c6bb95271c1fe05aa173929280c762878;p=openwrt%2Fstaging%2Fdangole.git

ath79: buffalo_wzr-hp-g450h: fix dtc warnings

Just name buttons directly, rather than abstract and then also a label.
Likewise for leds.  Avoids DTC warnings about unit address with no reg
parameter.

Signed-off-by: Karl Palsson <karlp@etactica.com>
---

diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
index 4e52e30b9d..4d7a545665 100644
--- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
@@ -21,36 +21,31 @@
 		#size-cells = <0>;
 
 		poll-interval = <20>;
-		button@0 {
-			label = "usb";
+		usb {
 			linux,code = <BTN_2>;
 			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 			debounce-interval = <60>;
 		};
 
-		button@1 {
-			label = "reset";
+		reset {
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 			debounce-interval = <60>;
 		};
 
-		button@2 {
-			label = "movie_engine";
+		movie_engine {
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
 			debounce-interval = <60>;
 		};
 
-		button@3 {
-			label = "aoss";
+		aoss {
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 			debounce-interval = <60>;
 		};
 
-		button@4 {
-			label = "router_off";
+		router_off {
 			linux,code = <BTN_5>;
 			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
 			debounce-interval = <60>;
@@ -60,12 +55,12 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		security {
 			label = "buffalo:orange:security";
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		led@1 {
+		diag {
 			label = "buffalo:red:diag";
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 		};
@@ -120,7 +115,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k@0000 {
+	ath9k@0 {
 		reg = <0x0000 0 0 0 0>;
 		qca,no-eeprom;
 	};