From: Rafał Miłecki Date: Fri, 19 Aug 2016 10:44:44 +0000 (+0200) Subject: bcm53xx: update copy of ASM entry flushing whole D-cache X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=28d641be43a5acde4dc3ff49112852cb661fd41a;p=openwrt%2Fstaging%2Fhauke.git bcm53xx: update copy of ASM entry flushing whole D-cache Previous version was based on code from kernel 2.6.22 with Broadcom two trivial modifications. This updates the copy to the version from current kernel and refreshes the patch. This was tested for regressions on Netgear R6250 (BCM4708A0), D-Link DIR-885L (BCM4709C0) and Tenda AC9 (BCM47189B0). Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/bcm53xx/files/arch/arm/boot/compressed/cache-v7-min.S b/target/linux/bcm53xx/files/arch/arm/boot/compressed/cache-v7-min.S index 945e5a1005..ba72ac3fcf 100644 --- a/target/linux/bcm53xx/files/arch/arm/boot/compressed/cache-v7-min.S +++ b/target/linux/bcm53xx/files/arch/arm/boot/compressed/cache-v7-min.S @@ -20,48 +20,62 @@ * * Flush the whole D-cache. * - * Corrupted registers: r0-r5, r7, r9-r11 + * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode) * * - mm - mm_struct describing address space */ ENTRY(v7_flush_dcache_all) + dmb @ ensure ordering with previous memory accesses mrc p15, 1, r0, c0, c0, 1 @ read clidr - ands r3, r0, #0x7000000 @ extract loc from clidr - mov r3, r3, lsr #23 @ left align loc bit field + mov r3, r0, lsr #23 @ move LoC into position + ands r3, r3, #7 << 1 @ extract LoC*2 from clidr beq finished @ if loc is 0, then no need to clean +start_flush_levels: mov r10, #0 @ start clean at cache level 0 -loop1: +flush_levels: add r2, r10, r10, lsr #1 @ work out 3x current cache level mov r1, r0, lsr r2 @ extract cache type bits from clidr and r1, r1, #7 @ mask of the bits for current cache only cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache +#ifdef CONFIG_PREEMPT + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic +#endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr mrc p15, 1, r1, c0, c0, 0 @ read the new csidr +#ifdef CONFIG_PREEMPT + restore_irqs_notrace r9 +#endif and r2, r1, #7 @ extract the length of the cache lines add r2, r2, #4 @ add 4 (line length offset) - ldr r4, =0x3ff + movw r4, #0x3ff ands r4, r4, r1, lsr #3 @ find maximum number on the way size clz r5, r4 @ find bit position of way size increment - ldr r7, =0x7fff + movw r7, #0x7fff ands r7, r7, r1, lsr #13 @ extract max number of the index size +loop1: + mov r9, r7 @ create working copy of max index loop2: - mov r9, r4 @ create working copy of max way size -loop3: - orr r11, r10, r9, lsl r5 @ factor way and cache number into r11 - orr r11, r11, r7, lsl r2 @ factor index number into r11 + ARM( orr r11, r10, r4, lsl r5 ) @ factor way and cache number into r11 + THUMB( lsl r6, r4, r5 ) + THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 + ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 + THUMB( lsl r6, r9, r2 ) + THUMB( orr r11, r11, r6 ) @ factor index number into r11 mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the way - bge loop3 - subs r7, r7, #1 @ decrement the index + subs r9, r9, #1 @ decrement the index bge loop2 + subs r4, r4, #1 @ decrement the way + bge loop1 skip: add r10, r10, #2 @ increment cache number cmp r3, r10 - bgt loop1 + bgt flush_levels finished: mov r10, #0 @ swith back to cache level 0 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + dsb st isb - mov pc, lr + ret lr +ENDPROC(v7_flush_dcache_all) diff --git a/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch index 5dba027725..1c73775b43 100644 --- a/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch +++ b/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch @@ -82,19 +82,20 @@ Signed-off-by: Rafał Miłecki + mov r8, r12 --- a/arch/arm/boot/compressed/cache-v7-min.S +++ b/arch/arm/boot/compressed/cache-v7-min.S -@@ -51,7 +51,7 @@ loop2: - loop3: - orr r11, r10, r9, lsl r5 @ factor way and cache number into r11 - orr r11, r11, r7, lsl r2 @ factor index number into r11 +@@ -12,6 +12,7 @@ + + #include + #include ++#include + + __INIT + +@@ -63,7 +64,7 @@ loop2: + ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 + THUMB( lsl r6, r9, r2 ) + THUMB( orr r11, r11, r6 ) @ factor index number into r11 - mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way -+ mcr p15, 0, r11, c7, c6, 2 @ Invalidate line - subs r9, r9, #1 @ decrement the way - bge loop3 - subs r7, r7, #1 @ decrement the index -@@ -63,5 +63,6 @@ skip: - finished: - mov r10, #0 @ swith back to cache level 0 - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr -+ dsb - isb - mov pc, lr ++ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way + subs r9, r9, #1 @ decrement the index + bge loop2 + subs r4, r4, #1 @ decrement the way