From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 7 Jan 2010 16:30:56 +0000 (+0000)
Subject: e1000e: call pci_save_state() after pci_restore_state()
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=28b8f04a5256ca5ec0781b06ee9353c37c650980;p=openwrt%2Fstaging%2Fblogic.git

e1000e: call pci_save_state() after pci_restore_state()

Due to a change in pci_restore_state()[1] which clears the saved_state
flag, the driver should call pci_save_state() to set the flag once again
to avoid issues with EEH (same fix that recently was submitted for ixgbe).

[1] commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 762b697ce731..10aa0ec719df 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4674,6 +4674,7 @@ static int e1000_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
+	pci_save_state(pdev);
 	e1000e_disable_l1aspm(pdev);
 
 	err = pci_enable_device_mem(pdev);
@@ -4825,6 +4826,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 	} else {
 		pci_set_master(pdev);
 		pci_restore_state(pdev);
+		pci_save_state(pdev);
 
 		pci_enable_wake(pdev, PCI_D3hot, 0);
 		pci_enable_wake(pdev, PCI_D3cold, 0);