From: Luka Perkov Date: Wed, 11 Jul 2012 23:38:14 +0000 (+0000) Subject: ocf: update to version 20120127 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=283021ac15faec84a1764d7883cfb47db7847d0c;p=openwrt%2Fstaging%2Fadrian.git ocf: update to version 20120127 SVN-Revision: 32672 --- diff --git a/target/linux/generic/files/crypto/ocf/Kconfig b/target/linux/generic/files/crypto/ocf/Kconfig index 0a572886ef..65a4461915 100644 --- a/target/linux/generic/files/crypto/ocf/Kconfig +++ b/target/linux/generic/files/crypto/ocf/Kconfig @@ -26,7 +26,6 @@ config OCF_CRYPTODEV config OCF_CRYPTOSOFT tristate "cryptosoft (software crypto engine)" - select CRYPTO_MANAGER depends on OCF_OCF help A software driver for the OCF framework that uses diff --git a/target/linux/generic/files/crypto/ocf/Makefile b/target/linux/generic/files/crypto/ocf/Makefile index e600f9bab7..110ed83ea6 100644 --- a/target/linux/generic/files/crypto/ocf/Makefile +++ b/target/linux/generic/files/crypto/ocf/Makefile @@ -105,6 +105,7 @@ patch: patch=ocf-linux-base.patch; \ patch24=ocf-linux-24.patch; \ patch26=ocf-linux-26.patch; \ + patch3=ocf-linux-3.patch; \ ( \ find . -name Makefile; \ find . -name Config.in; \ @@ -116,6 +117,8 @@ patch: done > $$patch; \ cat $$patchbase/patches/linux-2.4.35-ocf.patch $$patch > $$patch24; \ cat $$patchbase/patches/linux-2.6.38-ocf.patch $$patch > $$patch26; \ + cat $$patchbase/patches/linux-3.2.1-ocf.patch $$patch > $$patch3; \ + # # this target probably does nothing for anyone but me - davidm diff --git a/target/linux/generic/files/crypto/ocf/README b/target/linux/generic/files/crypto/ocf/README deleted file mode 100644 index 88849ddc48..0000000000 --- a/target/linux/generic/files/crypto/ocf/README +++ /dev/null @@ -1,246 +0,0 @@ -########################### -README - ocf-linux-20100530 -########################### - -This README provides instructions for getting ocf-linux compiled and -operating in a generic linux environment. Other information on the project -can be found at the home page: - - http://ocf-linux.sourceforge.net/ - -Embedded systems and applications requiring userspace acceleration will need -to patch the kernel source to get full OCF support. See "Adding OCF to -linux source" below. Otherwise the "OCF Quickstart" that follows is the -easiest way to get started. - -If your goal is to accelerate Openswan on Ubuntu or CentOS, you may find -that the required binaries are already available on openswan.org: - - ftp://ftp.openswan.org/ocf/ - ftp://ftp.openswan.org/openswan/binaries/ubuntu/ - -##################################################### -OCF Quickstart for Ubuntu/Others (including Openswan) -##################################################### - -This section provides instructions on how to quickly add kernel only support -for OCF to a GNU/Linux system. It is only suitable for in-kernel use such as -Openswan MAST/KLIPS. - -If the target is an embedded system, or, userspace acceleration of -applications such as OpenVPN and OpenSSL, the section below titled -"Adding OCF to linux source" is more appropriate. - -Before building kernel only support for OCF ensure that the appropriate -linux-headers package is installed: - - cd ocf - make ocf_modules - sudo make ocf_install - OCF_DIR=`pwd` # remember where OCF sources were built - -At this point the ocf, cryptosoft, ocfnull, hifn7751 and ocf-bench modules -should have been built and installed. The OCF installation can be tested -with the following commands: - - modprobe ocf - modprobe cryptosoft - modprobe ocf-bench - dmesg | tail -5 - -The final modprobe of ocf-bench will fail, this is intentional as ocf-bench -is a short lived module that tests in-kernel performance of OCF. If -everything worked correctly the "dmesg | tail -5" should include a line -like: - - [ 583.128741] OCF: 45133 requests of 1488 bytes in 251 jiffies (535.122 Mbps) - -This shows the in-kernel performance of OCF using the cryptosoft driver. -For addition driver load options, see "How to load the OCF modules" below. - -If the intention is to run an OCF accelerated Openswan (KLIPS/MAST) then use -these steps to compile openswan downloaded from openswan.org (2.6.34 or later). - - tar xf openswan-2.6.34.tar.gz - cd openswan-2.6.34 - make programs - make KERNELSRC=/lib/modules/`uname -r`/build \ - KBUILD_EXTRA_SYMBOLS=$OCF_DIR/Module.symvers \ - MODULE_DEF_INCLUDE=`pwd`/packaging/ocf/config-all.hmodules \ - MODULE_DEFCONFIG=`pwd`/packaging/ocf/defconfig \ - module - sudo make KERNELSRC=/lib/modules/`uname -r`/build \ - KBUILD_EXTRA_SYMBOLS=$OCF_DIR/Module.symvers \ - MODULE_DEF_INCLUDE=`pwd`/packaging/ocf/config-all.hmodules \ - MODULE_DEFCONFIG=`pwd`/packaging/ocf/defconfig \ - install minstall - -The rest of this document is only required for more complex build -requirements. - -########################## -Adding OCF to linux source -########################## - -It is recommended that OCF be built as modules as it increases the -flexibility and ease of debugging the system. - -Ensure that the system has /dev/crypto for userspace access to OCF: - - mknod /dev/crypto c 10 70 - -Generate the kernel patches and apply the appropriate one. - - cd ocf - make patch - -This will provide three files: - - linux-2.4.*-ocf.patch - linux-2.6.*-ocf.patch - ocf-linux-base.patch - -If either of the first two patches applies to the targets kernel, then one -of the following as required: - - cd linux-2.X.Y; patch -p1 < linux-2.4.*-ocf.patch - cd linux-2.6.Y; patch -p1 < linux-2.6.*-ocf.patch - -Otherwise, locate the appropriate kernel patch in the patches directory and -apply that as well as the ocf-linux-base.patch using '-p1'. - -When using a linux-2.4 system on a non-x86 platform, the following may be -required to build cryptosoft: - - cp linux-2.X.x/include/asm-i386/kmap_types.h linux-2.X.x/include/asm-YYY - -When using cryptosoft, for simplicity, enable all the crypto support in the -kernel except for the test driver. Likewise for the OCF options. Do not -enable OCF crypto drivers for HW that is not present (for example the ixp4xx -driver will not compile on non-Xscale systems). - -Make sure that cryptodev.h from the ocf directory is installed as -crypto/cryptodev.h in an include directory that is used for building -applications for the target platform. For example on a host system that -might be: - - /usr/include/crypto/cryptodev.h - -Patch the openssl-0.9.8r code the openssl-0.9.8r.patch from the patches -directory. There are many older patch versions in the patches directory -if required. - -The openssl patches provide the following functionality: - - * enables --with-cryptodev for non BSD systems - * adds -cpu option to openssl speed for calculating CPU load under linux - * fixes null pointer in openssl speed multi thread output. - * fixes test keys to work with linux crypto's more stringent key checking. - * adds MD5/SHA acceleration (Ronen Shitrit), only enabled with the - --with-cryptodev-digests option - * fixes bug in engine code caching. - -Build the crypto-tools directory for the target to obtain a userspace -testing tool call cryptotest. - -########################### -How to load the OCF modules -########################### - -First insert the base modules (cryptodev is optional, it is only used -for userspace acceleration): - - modprobe ocf - modprobe cryptodev - -Load the software OCF driver with: - - modprobe cryptosoft - -and zero or more of the OCF HW drivers with: - - modprobe safe - modprobe hifn7751 - modprobe ixp4xx - ... - -All the drivers take a debug option to enable verbose debug so that -OCF operation may be observed via "dmesg" or the console. For debug -load the modules as: - - modprobe ocf crypto_debug=1 - modprobe cryptodev cryptodev_debug=1 - modprobe cryptosoft swcr_debug=1 - -More than one OCF crypto driver may be loaded but then there is no -guarantee as to which will be used (other than a preference for HW -drivers over SW drivers by most applications). - -It is also possible to enable debug at run time on linux-2.6 systems -with the following: - - echo 1 > /sys/module/ocf/parameters/crypto_debug - echo 1 > /sys/module/cryptodev/parameters/cryptodev_debug - echo 1 > /sys/module/cryptosoft/parameters/swcr_debug - echo 1 > /sys/module/hifn7751/parameters/hifn_debug - echo 1 > /sys/module/safe/parameters/safe_debug - echo 1 > /sys/module/ixp4xx/parameters/ixp_debug - ... - -The ocf-bench driver accepts the following parameters: - - request_q_len - Maximum number of outstanding requests to OCF - request_num - run for at least this many requests - request_size - size of each request (multiple of 16 bytes recommended) - request_batch - enable OCF request batching - request_cbimm - enable OCF immediate callback on completion - -For example: - - modprobe ocf-bench request_size=1024 request_cbimm=0 - -####################### -Testing the OCF support -####################### - -run "cryptotest", it should do a short test for a couple of -des packets. If it does everything is working. - -If this works, then ssh will use the driver when invoked as: - - ssh -c 3des username@host - -to see for sure that it is operating, enable debug as defined above. - -To get a better idea of performance run: - - cryptotest 100 4096 - -There are more options to cryptotest, see the help. - -It is also possible to use openssl to test the speed of the crypto -drivers. - - openssl speed -evp des -engine cryptodev -elapsed - openssl speed -evp des3 -engine cryptodev -elapsed - openssl speed -evp aes128 -engine cryptodev -elapsed - -and multiple threads (10) with: - - openssl speed -evp des -engine cryptodev -elapsed -multi 10 - openssl speed -evp des3 -engine cryptodev -elapsed -multi 10 - openssl speed -evp aes128 -engine cryptodev -elapsed -multi 10 - -for public key testing you can try: - - cryptokeytest - openssl speed -engine cryptodev rsa -elapsed - openssl speed -engine cryptodev dsa -elapsed - - -############################# -# -# David McCullough -# david_mccullough@mcafee.com -# -############################# diff --git a/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c b/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c index d03540b64e..f4841f5557 100644 --- a/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c +++ b/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c @@ -592,7 +592,7 @@ c7108_process(void *arg, struct cryptop *crp, int hint) i < skb_shinfo(skb)->nr_frags && sg_num < SCATTERLIST_MAX; i++) { if (skip < skb_shinfo(skb)->frags[i].size) { - //sg[sg_num].page = skb_frag_page(&kb_shinfo(skb)->frags[i]); + //sg[sg_num].page = skb_frag_page(&skb_shinfo(skb)->frags[i]); //sg[sg_num].offset = skb_shinfo(skb)->frags[i].page_offset + skip; len = skb_shinfo(skb)->frags[i].size - skip; if (len + sg_len > crd->crd_len) @@ -636,6 +636,8 @@ c7108_process(void *arg, struct cryptop *crp, int hint) sg_set_page(&sg[0], virt_to_page(crp->crp_buf + skip), sg_len, offset_in_page(crp->crp_buf + skip)); sg_num = 1; } + if (sg_num > 0) + sg_mark_end(&sg[sg_num-1]); switch (sw->xfm_type) { diff --git a/target/linux/generic/files/crypto/ocf/criov.c b/target/linux/generic/files/crypto/ocf/criov.c index cdc731e29a..a8c1a8c4dc 100644 --- a/target/linux/generic/files/crypto/ocf/criov.c +++ b/target/linux/generic/files/crypto/ocf/criov.c @@ -143,7 +143,6 @@ EXPORT_SYMBOL(cuio_copyback); EXPORT_SYMBOL(cuio_copydata); EXPORT_SYMBOL(cuio_getptr); - static void skb_copy_bits_back(struct sk_buff *skb, int offset, caddr_t cp, int len) { diff --git a/target/linux/generic/files/crypto/ocf/cryptocteon/README.txt b/target/linux/generic/files/crypto/ocf/cryptocteon/README.txt new file mode 100644 index 0000000000..807b2e518c --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/cryptocteon/README.txt @@ -0,0 +1,11 @@ + +You will need the CRYPTO package installed to build this driver, and +potentially the ADK. + +cavium_crypto sourced from: + + adk/components/source/cavium_ipsec_kame/cavium_ipsec.c + +and significantly modified to suit use with OCF. All original +copyright/ownership headers retained. + diff --git a/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c b/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c index b0c10a295a..0168ad3219 100644 --- a/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c +++ b/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c @@ -497,7 +497,8 @@ octo_process(device_t dev, struct cryptop *crp, int hint) offset_in_page(crp->crp_buf)); sg_num = 1; } - + if (sg_num > 0) + sg_mark_end(&sg[sg_num-1]); /* * setup a new explicit key diff --git a/target/linux/generic/files/crypto/ocf/cryptosoft.c b/target/linux/generic/files/crypto/ocf/cryptosoft.c index f9ecdf927d..aa2383d1f0 100644 --- a/target/linux/generic/files/crypto/ocf/cryptosoft.c +++ b/target/linux/generic/files/crypto/ocf/cryptosoft.c @@ -814,6 +814,8 @@ static void swcr_process_req(struct swcr_req *req) sg_len, offset_in_page(crp->crp_buf + skip)); sg_num = 1; } + if (sg_num > 0) + sg_mark_end(&req->sg[sg_num-1]); switch (sw->sw_type & SW_TYPE_ALG_AMASK) { diff --git a/target/linux/generic/files/crypto/ocf/ep80579/environment.mk b/target/linux/generic/files/crypto/ocf/ep80579/environment.mk new file mode 100644 index 0000000000..1a663e5870 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/ep80579/environment.mk @@ -0,0 +1,78 @@ + ########################################################################### + # +# This file is provided under a dual BSD/GPLv2 license. When using or +# redistributing this file, you may do so under either license. +# +# GPL LICENSE SUMMARY +# +# Copyright(c) 2007,2008 Intel Corporation. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of version 2 of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# The full GNU General Public License is included in this distribution +# in the file called LICENSE.GPL. +# +# Contact Information: +# Intel Corporation +# +# BSD LICENSE +# +# Copyright(c) 2007,2008 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# +# version: Security.L.1.0.130 + # + ########################################################################### + + +ICP_LAC_API=$(ICP_ROOT)/Acceleration/include/lac +ICP_BTR_API=$(ICP_ROOT)/Acceleration/include/btr +ICP_API_DIR=$(ICP_ROOT)/Acceleration/include +ICP_OCF_SHIM_DIR?=$(KERNEL_SOURCE_ROOT)/crypto/ocf/ +ifeq ($(wildcard $(ICP_OCF_SHIM_DIR)),) +ICP_OCF_SHIM_DIR?=$(ROOTDIR)/modules/ocf/ +endif + +ICP_OS_LEVEL?=kernel_space + +ICP_OS?=linux_2.6 + +ICP_CORE?=ia + diff --git a/target/linux/generic/files/crypto/ocf/ep80579/linux_2.6_kernel_space.mk b/target/linux/generic/files/crypto/ocf/ep80579/linux_2.6_kernel_space.mk new file mode 100644 index 0000000000..96afa9a453 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/ep80579/linux_2.6_kernel_space.mk @@ -0,0 +1,69 @@ +################### +# @par +# This file is provided under a dual BSD/GPLv2 license. When using or +# redistributing this file, you may do so under either license. +# +# GPL LICENSE SUMMARY +# +# Copyright(c) 2007,2008 Intel Corporation. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of version 2 of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# The full GNU General Public License is included in this distribution +# in the file called LICENSE.GPL. +# +# Contact Information: +# Intel Corporation +# +# BSD LICENSE +# +# Copyright(c) 2007,2008 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# +# version: Security.L.1.0.130 +################### + +#specific include directories in kernel space +INCLUDES+=#e.g. -I$(OSAL_DIR)/include \ + +#Extra Flags Specific in kernel space e.g. include path or debug flags etc. e.g to add an include path EXTRA_CFLAGS += -I$(src)/../include +EXTRA_CFLAGS += $(INCLUDES) -O2 -Wall +EXTRA_LDFLAGS +=-whole-archive + diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c b/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c index b7df81907c..d554f16f42 100644 --- a/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c +++ b/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c @@ -434,10 +434,8 @@ hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent) if (pci_enable_device(dev) < 0) return(-ENODEV); -#ifdef HAVE_PCI_SET_MWI if (pci_set_mwi(dev)) return(-ENODEV); -#endif if (!dev->irq) { printk("hifn: found device with no IRQ assigned. check BIOS settings!"); diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c index 5bb5602567..4d6950ac36 100644 --- a/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c +++ b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c @@ -208,10 +208,8 @@ hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent) if (pci_enable_device(dev) < 0) return(-ENODEV); -#ifdef HAVE_PCI_SET_MWI if (pci_set_mwi(dev)) return(-ENODEV); -#endif if (!dev->irq) { printk("hifn: found device with no IRQ assigned. check BIOS settings!"); @@ -385,7 +383,6 @@ static struct pci_device_id hipp_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_8155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { 0 } }; MODULE_DEVICE_TABLE(pci, hipp_pci_tbl); diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCompVer.txt new file mode 100644 index 0000000000..5f39390c41 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.4 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c index 1d889ff148..e689f24eff 100644 --- a/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c +++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c @@ -92,6 +92,11 @@ extern int cesaReqResources; #define CESA_OCF_MAX_SES 128 #define CESA_Q_SIZE 64 +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0) +#define FRAG_PAGE(f) (f).p +#else +#define FRAG_PAGE(f) (f) +#endif /* data structures */ struct cesa_ocf_data { @@ -415,7 +420,7 @@ cesa_ocf_process(device_t dev, struct cryptop *crp, int hint) for ( i = 0; i < skb_shinfo(skb)->nr_frags; i++ ) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; p_buf_info->bufSize = frag->size; - p_buf_info->bufVirtPtr = page_address(frag->page) + frag->page_offset; + p_buf_info->bufVirtPtr = page_address(FRAG_PAGE(frag->page)) + frag->page_offset; p_buf_info++; } p_mbuf_info->numFrags = skb_shinfo(skb)->nr_frags + 1; diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCompVer.txt new file mode 100644 index 0000000000..5f39390c41 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.4 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfInit.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfInit.S new file mode 100644 index 0000000000..b7efda02c3 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfInit.S @@ -0,0 +1,163 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#define MV_ASMLANGUAGE +#include "mvOsAsm.h" +#include "mvDeviceId.h" +#include "mvCtrlEnvRegs.h" +#include "mvCpuIfRegs.h" +#include "mvCtrlEnvAsm.h" + + +/******************************************************************************* +* mvCpuIfPreInit - Make early initialization of CPU interface. +* +* DESCRIPTION: +* The function will initialize the CPU interface parameters that must +* be initialize before any BUS activity towards the DDR interface, +* which means it must be executed from ROM. Because of that, the function +* is implemented in assembly code. +* The function configure the following CPU config register parameters: +* 1) CPU2MbusLTickDrv +* 2) CPU2MbusLTickSample. +* NOTE: This function must be called AFTER the internal register +* base is modified to INTER_REGS_BASE. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +* r11 holds return function address. +*******************************************************************************/ +#define MV88F6281_PCKG_OPT 2 +#define MV88F6192_PCKG_OPT 1 +#define MV88F6180_PCKG_OPT 0 + + .globl _mvCpuIfPreInit +_mvCpuIfPreInit: + + mov r11, LR /* Save link register */ + + /* Read device ID */ + MV_CTRL_MODEL_GET_ASM(r4, r5); + + /* goto calcConfigReg if device is 6281 */ + ldr r5, =MV88F6281_PCKG_OPT + cmp r4, r5 + beq calcConfigReg + + /* goto calcConfigReg if device is 6192/6190 */ + ldr r5, =MV88F6192_PCKG_OPT + cmp r4, r5 + beq calcConfigReg + + /* Else 6180 */ + /* Get the "sample on reset" register */ + MV_REG_READ_ASM (r4, r5, MPP_SAMPLE_AT_RESET) + ldr r5, =MSAR_CPUCLCK_MASK_6180 + and r5, r4, r5 + mov r5, r5, lsr #MSAR_CPUCLCK_OFFS_6180 + + ldr r4, =CPU_2_MBUSL_DDR_CLK_1x3 + cmp r5, #CPU_2_DDR_CLK_1x3_1 + beq setConfigReg + + ldr r4, =CPU_2_MBUSL_DDR_CLK_1x4 + cmp r5, #CPU_2_DDR_CLK_1x4_1 + beq setConfigReg + b setConfigReg + +calcConfigReg: + /* Get the "sample on reset" register */ + MV_REG_READ_ASM (r4, r5, MPP_SAMPLE_AT_RESET) + ldr r5, =MSAR_DDRCLCK_RTIO_MASK + and r5, r4, r5 + mov r5, r5, lsr #MSAR_DDRCLCK_RTIO_OFFS + + ldr r4, =CPU_2_MBUSL_DDR_CLK_1x3 + cmp r5, #CPU_2_DDR_CLK_1x3 + beq setConfigReg + + ldr r4, =CPU_2_MBUSL_DDR_CLK_1x4 + cmp r5, #CPU_2_DDR_CLK_1x4 + beq setConfigReg + + /* Else */ + ldr r4, =0 + +setConfigReg: + /* Read CPU Config register */ + MV_REG_READ_ASM (r7, r5, CPU_CONFIG_REG) + ldr r5, =~(CCR_CPU_2_MBUSL_TICK_DRV_MASK | CCR_CPU_2_MBUSL_TICK_SMPL_MASK) + and r7, r7, r5 /* Clear register fields */ + orr r7, r7, r4 /* Set the values according to the findings */ + MV_REG_WRITE_ASM (r7, r5, CPU_CONFIG_REG) + +done: + mov PC, r11 /* r11 is saved link register */ diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c index 27b961a265..6ac7f12bfc 100644 --- a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c @@ -85,7 +85,7 @@ static MV_TARGET tdmAddrDecPrioTap[] = DEV_BOOCS, PEX0_IO, TBL_TERM -}; +}; static MV_STATUS tdmWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin); diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/mvCompVer.txt new file mode 100644 index 0000000000..40fea93cf4 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.5 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCompVer.txt new file mode 100644 index 0000000000..3afa556b6e --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.3 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvCompVer.txt new file mode 100644 index 0000000000..3afa556b6e --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.3 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfBasicInit.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfBasicInit.S new file mode 100644 index 0000000000..f2a9365c0b --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfBasicInit.S @@ -0,0 +1,988 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#define MV_ASMLANGUAGE +#include "mvSysHwConfig.h" +#include "mvOsAsm.h" +#include "mvBoardEnvSpec.h" +#include "mvCpuIfRegs.h" +#include "mvDramIfConfig.h" +#include "mvDramIfRegs.h" +#include "pex/mvPexRegs.h" +#include "pci/mvPciRegs.h" +#include "mvCtrlEnvSpec.h" +#include "mvCtrlEnvAsm.h" +#include "cpu/mvCpuArm.h" +#include "mvCommon.h" + +/* defines */ + +#if !defined(MV_INC_BOARD_DDIM) +.globl dramBoot1 +dramBoot1: + .word 0 + +/****************************************************************************** +* +* +* +* +*******************************************************************************/ +#if defined(DB_PRPMC) || defined(DB_PEX_PCI) || defined(DB_MNG) + +/* PEX_PCI and PRPMC boards 256 MB*/ +#define STATIC_SDRAM0_BANK0_SIZE 0x0fff0001 +#define STATIC_SDRAM_CONFIG 0x03248400 +#define STATIC_SDRAM_MODE 0x62 +#define STATIC_DUNIT_CTRL_LOW 0x4041000 +#define STATIC_SDRAM_ADDR_CTRL 0x00000020 +#define STATIC_SDRAM_TIME_CTRL_LOW 0x11602220 +#define STATIC_SDRAM_TIME_CTRL_HI 0x0000030F +#define STATIC_SDRAM_ODT_CTRL_LOW 0x0 +#define STATIC_SDRAM_ODT_CTRL_HI 0x0 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0 +#define STATIC_SDRAM_EXT_MODE 0x0 + +#elif defined(DB_FPGA) + +/* FPGA DC boards 256 MB*/ +#define STATIC_SDRAM0_BANK0_SIZE 0x0fff0001 +#define STATIC_SDRAM_CONFIG 0x03208400 /* 32bit */ +#define STATIC_SDRAM_MODE 0x22 +#define STATIC_DUNIT_CTRL_LOW 0x03041000 +#define STATIC_SDRAM_ADDR_CTRL 0x00000020 +#define STATIC_SDRAM_TIME_CTRL_LOW 0x11112220 +#define STATIC_SDRAM_TIME_CTRL_HI 0x0000000D +#define STATIC_SDRAM_ODT_CTRL_LOW 0x0 +#define STATIC_SDRAM_ODT_CTRL_HI 0x0 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0 +#define STATIC_SDRAM_EXT_MODE 0x1 + +#elif defined(RD_88F6183GP) || defined(DB_CUSTOMER) + +/* Customer 1 DDR2 2 devices 512Mbit by 16 bit */ +#define STATIC_SDRAM0_BANK0_SIZE 0x07ff0001 +#define STATIC_SDRAM_CONFIG 0x03158400 +#define STATIC_SDRAM_MODE 0x452 +#define STATIC_DUNIT_CTRL_LOW 0x06041000 +#define STATIC_SDRAM_ADDR_CTRL 0x00000020 +#define STATIC_SDRAM_TIME_CTRL_LOW 0x11912220 +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000502 +#define STATIC_SDRAM_ODT_CTRL_LOW 0x00010000 +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000002 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x00000601 +#define STATIC_SDRAM_EXT_MODE 0x00000440 + + +#elif defined(RD_88F6183AP) + +/* DDR2 1 devices 512Mbit by 16 bit */ +#define STATIC_SDRAM0_BANK0_SIZE 0x03ff0001 +#define STATIC_SDRAM_CONFIG 0x1f154400 +#define STATIC_SDRAM_MODE 0x432 +#define STATIC_DUNIT_CTRL_LOW 0x04041000 +#define STATIC_SDRAM_ADDR_CTRL 0x00000020 +#define STATIC_SDRAM_TIME_CTRL_LOW 0x11912220 +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000502 +#define STATIC_SDRAM_ODT_CTRL_LOW 0x00010000 +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000002 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x00000601 +#define STATIC_SDRAM_EXT_MODE 0x00000440 + +/* 6082L MARVELL DIMM */ +#elif defined(DB_88F6082LBP) +#define STATIC_SDRAM0_BANK0_SIZE 0x07ff0001 +#define STATIC_SDRAM_CONFIG 0x7f158400 +#define STATIC_SDRAM_MODE 0x432 +#define STATIC_DUNIT_CTRL_LOW 0x04041040 +#define STATIC_SDRAM_ADDR_CTRL 0x00000020 +#define STATIC_SDRAM_TIME_CTRL_LOW 0x11612220 +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000501 +#define STATIC_SDRAM_ODT_CTRL_LOW 0x00010000 +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000002 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x00000a01 +#define STATIC_SDRAM_EXT_MODE 0x00000440 + +#elif defined(RD_88W8660_AP82S) + +/* Shark RD */ + +#if defined(MV_DRAM_32M) +#define STATIC_SDRAM0_BANK0_SIZE 0x01ff0001 +#define STATIC_SDRAM_ADDR_CTRL 0x00000010 +#elif defined(MV_DRAM_16M) + +#define STATIC_SDRAM0_BANK0_SIZE 0x00ff0001 +#define STATIC_SDRAM_ADDR_CTRL 0x00000000 + +#else +#error "NO DDR size selected" +#endif + +#define STATIC_SDRAM_CONFIG 0x03144400 +#define STATIC_SDRAM_MODE 0x62 +#define STATIC_DUNIT_CTRL_LOW 0x4041000 + +#define STATIC_SDRAM_TIME_CTRL_LOW 0x11602220 +#define STATIC_SDRAM_TIME_CTRL_HI 0x0000040b +#define STATIC_SDRAM_ODT_CTRL_LOW 0x0 +#define STATIC_SDRAM_ODT_CTRL_HI 0x0 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0 +#define STATIC_SDRAM_EXT_MODE 0x0 + +#elif defined(RD_88W8660) + +/* Shark RD */ +#define STATIC_SDRAM0_BANK0_SIZE 0x03ff0001 +#define STATIC_SDRAM_CONFIG 0x03144400 +#define STATIC_SDRAM_MODE 0x62 +#define STATIC_DUNIT_CTRL_LOW 0x4041000 +#define STATIC_SDRAM_ADDR_CTRL 0x00000010 +#define STATIC_SDRAM_TIME_CTRL_LOW 0x11602220 +#define STATIC_SDRAM_TIME_CTRL_HI 0x0000040b +#define STATIC_SDRAM_ODT_CTRL_LOW 0x0 +#define STATIC_SDRAM_ODT_CTRL_HI 0x0 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0 +#define STATIC_SDRAM_EXT_MODE 0x0 + +#else /* NAS */ + + +#if defined(RD_88F5182) + +#if defined(MV_88F5082) +#define STATIC_SDRAM0_BANK0_SIZE 0x3ff0001 +#define STATIC_SDRAM_ADDR_CTRL 0x20 +#else +#define STATIC_SDRAM0_BANK0_SIZE 0x7ff0001 +#define STATIC_SDRAM_ADDR_CTRL 0x20 +#endif + +#elif defined(RD_88F5182_3) + +#if defined(MV_88F5082) +#define STATIC_SDRAM0_BANK0_SIZE 0x3ff0001 +#define STATIC_SDRAM_ADDR_CTRL 0x20 +#else +#define STATIC_SDRAM0_BANK0_SIZE 0x7ff0001 +#define STATIC_SDRAM_ADDR_CTRL 0x20 +#endif + +#else + +#define STATIC_SDRAM0_BANK0_SIZE 0x1ff0001 +#define STATIC_SDRAM_ADDR_CTRL 0x0 + +#endif + +#if defined(MV_88F5082) +#define STATIC_SDRAM_CONFIG 0x3144400 +#else +#define STATIC_SDRAM_CONFIG 0x3148400 +#endif +#define STATIC_SDRAM_MODE 0x62 +#define STATIC_DUNIT_CTRL_LOW 0x4041000 +#define STATIC_SDRAM_TIME_CTRL_LOW 0x11602220 +#define STATIC_SDRAM_TIME_CTRL_HI 0x40c +#define STATIC_SDRAM_ODT_CTRL_LOW 0x0 +#define STATIC_SDRAM_ODT_CTRL_HI 0x0 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0 +#define STATIC_SDRAM_EXT_MODE 0x0 + +#endif + + .globl _mvDramIfStaticInit +_mvDramIfStaticInit: + + mov r11, LR /* Save link register */ + mov r10, r2 + + /* If we boot from NAND jump to DRAM sddress */ + + mov r5, #1 + ldr r6, =dramBoot1 + str r5, [r6] /* We started executing from DRAM */ + + ldr r6, dramBoot1 + cmp r6, #0 + bne 1f + + + /* set all dram windows to 0 */ + mov r6, #0 + MV_REG_WRITE_ASM(r6, r5, 0x1504) + MV_REG_WRITE_ASM(r6, r5, 0x150c) + MV_REG_WRITE_ASM(r6, r5, 0x1514) + MV_REG_WRITE_ASM(r6, r5, 0x151c) + + /* set all dram configuration in temp registers */ + ldr r6, = STATIC_SDRAM0_BANK0_SIZE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG0) + ldr r6, = STATIC_SDRAM_CONFIG + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG1) + ldr r6, = STATIC_SDRAM_MODE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG2) + ldr r6, = STATIC_DUNIT_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG3) + ldr r6, = STATIC_SDRAM_ADDR_CTRL + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG4) + ldr r6, = STATIC_SDRAM_TIME_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG5) + ldr r6, = STATIC_SDRAM_TIME_CTRL_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG6) + ldr r6, = STATIC_SDRAM_ODT_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG7) + ldr r6, = STATIC_SDRAM_ODT_CTRL_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG8) + ldr r6, = STATIC_SDRAM_DUNIT_ODT_CTRL + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG9) + ldr r6, = STATIC_SDRAM_EXT_MODE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG10) + + mov sp, #0 + bl _mvDramIfConfig +1: + mov r2, r10 + mov PC, r11 /* r11 is saved link register */ + +#else /* #if !defined(MV_INC_BOARD_DDIM) */ + +.globl dramBoot1 +dramBoot1: + .word 0 + +/******************************************************************************* +* mvDramIfBasicInit - Basic initialization of DRAM interface +* +* DESCRIPTION: +* The function will initialize the DRAM for basic usage. The function +* will use the TWSI assembly API to extract DIMM parameters according +* to which DRAM interface will be initialized. +* The function referes to the following DRAM parameters: +* 1) DIMM is registered or not. +* 2) DIMM width detection. +* 3) DIMM density. +* +* INPUT: +* r3 - required size for initial DRAM. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +* Note: +* r4 holds I2C EEPROM address +* r5 holds SDRAM register base address +* r7 holds returned values +* r8 holds SDRAM various configuration registers value. +* r11 holds return function address. +*******************************************************************************/ +/* Setting the offsets of the I2C registers */ +#define NUM_OF_ROWS_OFFSET 3 +#define NUM_OF_COLS_OFFSET 4 +#define NUM_OF_RANKS 5 +#define SDRAM_WIDTH_OFFSET 13 +#define NUM_OF_BANKS_OFFSET 17 +#define SUPPORTED_CL_OFFSET 18 +#define DIMM_TYPE_INFO_OFFSET 20 /* DDR2 only */ +#define SDRAM_MODULES_ATTR_OFFSET 21 + +#define DRAM_DEV_DENSITY_128M 0x080 +#define DRAM_DEV_DENSITY_256M 0x100 +#define DRAM_DEV_DENSITY_512M 0x200 + .globl _mvDramIfBasicInit + .extern _i2cInit + +_mvDramIfBasicInit: + + mov r11, LR /* Save link register */ + + mov r5, #1 + ldr r8, =dramBoot1 + str r5, [r8] /* We started executing from DRAM */ + + /* If we boot from NAND jump to DRAM sddress */ + ldr r8, dramBoot1 + cmp r8, #0 + movne pc, r11 + + + + bl _i2cInit /* Initialize TWSI master */ + + /* Get default SDRAM Config values */ + MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG) + bic r8, r8, #SDRAM_DCFG_MASK + + + /* Read device ID */ + MV_CTRL_MODEL_GET_ASM(r4, r5); + + /* Return if OrionN */ + ldr r5, =MV_5180_DEV_ID + cmp r4, r5 + beq cat_through_end + + /* Return if Orion1 */ + ldr r5, =MV_5181_DEV_ID + cmp r4, r5 + beq cat_through_end + + /* Return if Nas */ + ldr r5, =MV_5182_DEV_ID + cmp r4, r5 + beq cat_through_end + + /* Return if Shark */ + ldr r5, =MV_8660_DEV_ID + cmp r4, r5 + beq cat_through_end + + /* goto calcConfigReg if bigger than Orion2*/ + ldr r5, =MV_5281_DEV_ID + cmp r4, r5 + bne cat_through + +cat_through: + /* set cat through - for better performance - in orion2 b0 and higher*/ + orr r8, r8, #SDRAM_CATTHR_EN + +cat_through_end: + + + /* Get registered/non registered info from DIMM */ + bl _is_Registered + beq nonRegistered + +setRegistered: + orr r8, r8, #SDRAM_REGISTERED /* Set registered bit(17) */ + +nonRegistered: + /* Get SDRAM width */ + bl _get_width + + orr r6, r8, #SDRAM_DCFG_X16_DEV /* x16 devices */ + cmp r7, #16 + beq setConfigReg + + orr r6, r8, #SDRAM_DCFG_X8_DEV /* x8 devices */ + cmp r7, #8 + beq setConfigReg + + /* This is an error. return */ + b exit_ddrAutoConfig + +setConfigReg: + mov r8, r6 + ldr r6, =SDRAM_CONFIG_DV + orr r8, r8, r6 /* Add default settings */ + mov r6, r8 /* Do not swap r8 content */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_CONFIG_REG) + + /* Set maximum CL supported by DIMM */ + bl _get_CAL + + /* r7 is DIMM supported CAS (e.g: 3 --> 0x1C) */ + clz r6, r7 + rsb r6, r6, #31 /* r6 = the bit number of MAX CAS supported */ + + /* Check the DDR version */ + tst r8, #SDRAM_DTYPE_DDR2 + bne casDdr2 + +casDdr1: + ldr r7, =3 /* stBurstDel field value */ + ldr r8, =0x52 /* Assuming MAX CL = 1.5 */ + cmp r6, #1 /* If CL = 1.5 break */ + beq setModeReg + + ldr r7, =3 /* stBurstDel field value */ + ldr r8, =0x22 /* Assuming MAX CL = 2 */ + cmp r6, #2 /* If CL = 2 break */ + beq setModeReg + + ldr r7, =4 /* stBurstDel field value */ + ldr r8, =0x62 /* Assuming MAX CL = 2.5 */ + cmp r6, #3 /* If CL = 2.5 break */ + beq setModeReg + + ldr r7, =4 /* stBurstDel field value */ + ldr r8, =0x32 /* Assuming MAX CL = 3 */ + cmp r6, #4 /* If CL = 3 break */ + beq setModeReg + + ldr r7, =5 /* stBurstDel field value */ + ldr r8, =0x42 /* Assuming MAX CL = 4 */ + cmp r6, #6 /* If CL = 4 break */ + b setModeReg + + b exit_ddrAutoConfig /* This is an error !! */ + +casDdr2: + ldr r7, =4 /* stBurstDel field value */ + ldr r8, =0x32 /* Assuming MAX CL = 3 */ + cmp r6, #3 /* If CL = 3 break */ + beq casDdr2Cont + + ldr r7, =5 /* stBurstDel field value */ + ldr r8, =0x42 /* Assuming MAX CL = 4 */ + cmp r6, #4 /* If CL = 4 break */ + beq casDdr2Cont + + /* CL 5 currently unsupported. We use CL 4 instead */ + ldr r7, =5 /* stBurstDel field value */ + ldr r8, =0x42 /* Assuming MAX CL = 5 */ + cmp r6, #5 /* If CL = 5 break */ + beq casDdr2Cont + + b exit_ddrAutoConfig /* This is an error !! */ +casDdr2Cont: + /* Write recovery for auto-precharge relevant only in DDR2 */ + orr r8, r8, #0x400 /* Default value */ + +setModeReg: + /* The CPU must not attempt to change the SDRAM Mode register setting */ + /* prior to DRAM controller completion of the DRAM initialization */ + /* sequence. To guarantee this restriction, it is recommended that */ + /* the CPU sets the SDRAM Operation register to NOP command, performs */ + /* read polling until the register is back in Normal operation value, */ + /* and then sets SDRAM Mode register to it's new value. */ + + /* write 'nop' to SDRAM operation */ + mov r6, #0x5 /* 'NOP' command */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll1: + ldr r6, [r5] + cmp r6, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll1 + + /* Now its safe to write new value to SDRAM Mode register */ + MV_REG_WRITE_ASM (r8, r5, SDRAM_MODE_REG) + + /* Make the Dunit write the DRAM its new mode */ + mov r6, #0x3 /* Mode Register Set command */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll2: + ldr r6, [r5] + cmp r6, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll2 + + /* Set Dunit control register according to max CL detected */ + /* If we use registered DIMM, add 1 to stBurstDel */ + MV_REG_READ_ASM (r6, r5, SDRAM_CONFIG_REG) + tst r6, #SDRAM_REGISTERED + beq setDunitReg + add r7, r7, #1 + +setDunitReg: + ldr r6, =SDRAM_DUNIT_CTRL_LOW_DV + orr r6, r6, r7, LSL #SDRAM_ST_BURST_DEL_OFFS + MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) + + + /* DIMM density configuration*/ + /* Density = (1 << (rowNum + colNum)) * dramWidth * dramBankNum */ +Density: + bl _getDensity + mov r8, r7 + mov r8, r8, LSR #20 /* Move density 20 bits to the right */ + /* For example 0x10000000 --> 0x1000 */ + + mov r6, #0x00 + cmp r8, #DRAM_DEV_DENSITY_128M + beq densCont + + mov r6, #0x10 + cmp r8, #DRAM_DEV_DENSITY_256M + beq densCont + + mov r6, #0x20 + cmp r8, #DRAM_DEV_DENSITY_512M + beq densCont + + /* This is an error. return */ + b exit_ddrAutoConfig + +densCont: + MV_REG_WRITE_ASM (r6, r5, SDRAM_ADDR_CTRL_REG) + + /* Config DDR2 registers (Extended mode, ODTs and pad calibration) */ + MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG) + tst r8, #SDRAM_DTYPE_DDR2 + beq _extModeODTEnd + + + /* Set DDR Extended Mode register for working with CS[0] */ + /* write 'nop' to SDRAM operation */ + mov r6, #0x5 /* 'NOP' command */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll3: + ldr r6, [r5] + cmp r6, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll3 + + /* Now its safe to write new value to SDRAM Extended Mode register */ + ldr r6, =DDR_SDRAM_EXT_MODE_CS0_DV + MV_REG_WRITE_ASM (r6, r5, SDRAM_EXTENDED_MODE_REG) + + /* Make the Dunit write the DRAM its new extended mode */ + mov r6, #0x4 /* Extended Mode Register Set command */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll4: + ldr r6, [r5] + cmp r6, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll4 + + /* ODT configuration is done for single bank CS[0] only */ + /* Config DDR2 On Die Termination (ODT) registers */ + ldr r6, =DDR2_ODT_CTRL_LOW_CS0_DV + MV_REG_WRITE_ASM (r6, r5, DDR2_SDRAM_ODT_CTRL_LOW_REG) + + ldr r6, =DDR2_ODT_CTRL_HIGH_CS0_DV + MV_REG_WRITE_ASM (r6, r5, DDR2_SDRAM_ODT_CTRL_HIGH_REG) + + ldr r6, =DDR2_DUNIT_ODT_CTRL_CS0_DV + MV_REG_WRITE_ASM (r6, r5, DDR2_DUNIT_ODT_CONTROL_REG) + + + /* we will check what device we are running and perform + Initialization according to device value */ + +_extModeODTEnd: + + /* Implement Guideline (GL# MEM-2) P_CAL Automatic Calibration */ + /* Does Not Work for Address/Control and Data Pads. */ + /* Relevant for: 88F5181-A1/B0 and 88F5281-A0 */ + + /* Read device ID */ + MV_CTRL_MODEL_GET_ASM(r6, r5); + /* Read device revision */ + MV_CTRL_REV_GET_ASM(r8, r5); + + /* Continue if OrionN */ + ldr r5, =MV_5180_DEV_ID + cmp r6, r5 + bne 1f + b glMem2End +1: + + /* Continue if Orion1 and device revision B1 */ + ldr r5, =MV_5181_DEV_ID + cmp r6, r5 + bne 1f + + cmp r8, #MV_5181_B1_REV + bge glMem2End + b glMem2Start +1: + + /* Orion NAS */ + ldr r5, =MV_5182_DEV_ID + cmp r6, r5 + beq glMem2Start + + /* Orion Shark */ + ldr r5, =MV_8660_DEV_ID + cmp r6, r5 + beq glMem2Start + + b glMem2End + +glMem2Start: + + /* DDR SDRAM Address/Control Pads Calibration */ + MV_REG_READ_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + /* Set Bit [31] to make the register writable */ + orr r8, r6, #SDRAM_WR_EN + + MV_REG_WRITE_ASM (r8, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + bic r6, r6, #SDRAM_WR_EN /* Make register read-only */ + bic r6, r6, #SDRAM_TUNE_EN /* Disable auto calibration */ + bic r6, r6, #SDRAM_DRVN_MASK /* Clear r5[5:0] */ + bic r6, r6, #SDRAM_DRVP_MASK /* Clear r5[11:6] */ + + /* Get the final N locked value of driving strength [22:17] */ + mov r5, r6 + mov r5, r5, LSL #9 + mov r5, r5, LSR #26 /* r5[5:0] = r6[22:17] */ + orr r5, r5, r5, LSL #6 /* r5[11:6] = r5[5:0] */ + + /* Write to both bits [5:0] and bits [11:6] */ + orr r6, r6, r5 + + MV_REG_WRITE_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + + /* DDR SDRAM Data Pads Calibration */ + MV_REG_READ_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG) + + /* Set Bit [31] to make the register writable */ + orr r8, r6, #SDRAM_WR_EN + + MV_REG_WRITE_ASM (r8, r5, SDRAM_DATA_PADS_CAL_REG) + + bic r6, r6, #SDRAM_WR_EN /* Make register read-only */ + bic r6, r6, #SDRAM_TUNE_EN /* Disable auto calibration */ + bic r6, r6, #SDRAM_DRVN_MASK /* Clear r5[5:0] */ + bic r6, r6, #SDRAM_DRVP_MASK /* Clear r5[11:6] */ + + /* Get the final N locked value of driving strength [22:17] */ + mov r5, r6 + mov r5, r5, LSL #9 + mov r5, r5, LSR #26 + orr r5, r5, r5, LSL #6 /* r5[5:0] = r6[22:17] */ + + /* Write to both bits [5:0] and bits [11:6] */ + orr r6, r6, r5 + + MV_REG_WRITE_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG) + +glMem2End: + /* Implement Guideline (GL# MEM-3) Drive Strength Value */ + /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */ + + /* Get SDRAM Config value */ + MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG) + + /* Get DIMM type */ + tst r8, #SDRAM_DTYPE_DDR2 + beq ddr1StrengthVal + +ddr2StrengthVal: + ldr r4, =DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV + ldr r8, =DDR2_DATA_PAD_STRENGTH_TYPICAL_DV + b setDrvStrength +ddr1StrengthVal: + ldr r4, =DDR1_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV + ldr r8, =DDR1_DATA_PAD_STRENGTH_TYPICAL_DV + +setDrvStrength: + /* DDR SDRAM Address/Control Pads Calibration */ + MV_REG_READ_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + orr r6, r6, #SDRAM_WR_EN /* Make register writeable */ + + MV_REG_WRITE_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG) + HTOLL(r6,r5) + + bic r6, r6, #SDRAM_WR_EN /* Make register read-only */ + bic r6, r6, #SDRAM_PRE_DRIVER_STRENGTH_MASK + orr r6, r4, r6 /* Set default value for DDR */ + + MV_REG_WRITE_ASM (r6, r5, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + + /* DDR SDRAM Data Pads Calibration */ + MV_REG_READ_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG) + + orr r6, r6, #SDRAM_WR_EN /* Make register writeable */ + + MV_REG_WRITE_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG) + HTOLL(r6,r5) + + bic r6, r6, #SDRAM_WR_EN /* Make register read-only */ + bic r6, r6, #SDRAM_PRE_DRIVER_STRENGTH_MASK + orr r6, r8, r6 /* Set default value for DDR */ + + MV_REG_WRITE_ASM (r6, r5, SDRAM_DATA_PADS_CAL_REG) + + + /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */ + /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */ + /* Get the "sample on reset" register for the DDR frequancy */ + +#if defined(MV_RUN_FROM_FLASH) + /* Calc the absolute address of the _cpuARMDDRCLK[] in the boot flash */ + ldr r7, = _cpuARMDDRCLK + ldr r4, =_start + ldr r4, [r4] + sub r7, r7, r4 + ldr r4, = Lrom_start_of_data + ldr r4, [r4] + add r7, r4, r7 +#else + /* Calc the absolute address of the _cpuARMDDRCLK[] in the boot flash */ + ldr r7, = _cpuARMDDRCLK + ldr r4, =_start + sub r7, r7, r4 + add r7, r7, #CFG_MONITOR_BASE +#endif + /* Get the "sample on reset" register for the DDR frequancy */ + MV_REG_READ_ASM (r4, r5, MPP_SAMPLE_AT_RESET) + ldr r5, =MSAR_ARMDDRCLCK_MASK + and r5, r4, r5 +#if 0 /* YOTAM TO BE FIX */ + mov r5, r5, LSR #MSAR_ARMDDRCLCK_OFFS +#endif + + /* Read device ID */ + MV_CTRL_MODEL_GET_ASM(r6, r8); + + /* Continue if TC90 */ + ldr r8, =MV_1281_DEV_ID + cmp r6, r6 + beq armClkMsb + + /* Continue if Orion2 */ + ldr r8, =MV_5281_DEV_ID + cmp r6, r8 +#if 0 /* YOTAM TO BE FIX */ + bne 1f +#endif + +armClkMsb: +#if 0 /* YOTAM TO BE FIX */ + tst r4, #MSAR_ARMDDRCLCK_H_MASK + beq 1f + orr r5, r5, #BIT4 +1: + ldr r4, =MV_CPU_ARM_CLK_ELM_SIZE + mul r5, r4, r5 + add r7, r7, r5 + add r7, r7, #MV_CPU_ARM_CLK_DDR_OFF + ldr r5, [r7] +#endif + + /* Get SDRAM Config value */ + MV_REG_READ_ASM (r8, r4, SDRAM_CONFIG_REG) + + /* Get DIMM type */ + tst r8, #SDRAM_DTYPE_DDR2 + beq ddr1FtdllVal + +ddr2FtdllVal: + ldr r4, =FTDLL_DDR2_250MHZ + ldr r7, =_250MHz + cmp r5, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_200MHZ + ldr r7, =_200MHz + cmp r5, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_166MHZ + ldr r7, =_166MHz + cmp r5, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_133MHZ + b setFtdllReg + +ddr1FtdllVal: + ldr r4, =FTDLL_DDR1_200MHZ + ldr r7, =_200MHz + cmp r5, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR1_166MHZ + ldr r7, =_166MHz + cmp r5, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR1_133MHZ + ldr r7, =_133MHz + cmp r5, r7 + beq setFtdllReg + ldr r4, =0 + +setFtdllReg: + +#if !defined(MV_88W8660) && !defined(MV_88F6183) && !defined(MV_88F6183L) + MV_REG_READ_ASM (r8, r5, SDRAM_FTDLL_CONFIG_REG) + orr r8, r8, r4 + MV_REG_WRITE_ASM (r8, r5, SDRAM_FTDLL_CONFIG_REG) + bic r8, r8, #1 + MV_REG_WRITE_ASM (r8, r5, SDRAM_FTDLL_CONFIG_REG) +#endif /* !defined(MV_88W8660) && !defined(MV_88F6183) && !defined(MV_88F6183L)*/ + + +setTimingReg: + /* Set default Timing parameters */ + MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG) + tst r8, #SDRAM_DTYPE_DDR2 + bne ddr2TimeParam + +ddr1TimeParam: + ldr r6, =DDR1_TIMING_LOW_DV + MV_REG_WRITE_ASM (r6, r5, SDRAM_TIMING_CTRL_LOW_REG) + ldr r6, =DDR1_TIMING_HIGH_DV + MV_REG_WRITE_ASM (r6, r5, SDRAM_TIMING_CTRL_HIGH_REG) + b timeParamDone + +ddr2TimeParam: + ldr r6, =DDR2_TIMING_LOW_DV + MV_REG_WRITE_ASM (r6, r5, SDRAM_TIMING_CTRL_LOW_REG) + ldr r6, =DDR2_TIMING_HIGH_DV + MV_REG_WRITE_ASM (r6, r5, SDRAM_TIMING_CTRL_HIGH_REG) + +timeParamDone: + /* Open CS[0] window to requested size and enable it. Disable other */ + /* windows */ + ldr r6, =SCBAR_BASE_MASK + sub r3, r3, #1 + and r3, r3, r6 + orr r3, r3, #1 /* Enable bank */ + MV_REG_WRITE_ASM (r3, r5, SDRAM_SIZE_REG(0)) + ldr r6, =0 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(1)) + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(2)) + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(3)) + +exit_ddrAutoConfig: + mov PC, r11 /* r11 is saved link register */ + + +/***************************************************************************************/ +/* r4 holds I2C EEPROM address + * r7 holds I2C EEPROM offset parameter for i2cRead and its --> returned value + * r8 holds SDRAM various configuration registers value. + * r13 holds Link register + */ +/**************************/ +_getDensity: + mov r13, LR /* Save link register */ + + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #NUM_OF_ROWS_OFFSET /* offset 3 */ + bl _i2cRead + mov r8, r7 /* r8 save number of rows */ + + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #NUM_OF_COLS_OFFSET /* offset 4 */ + bl _i2cRead + add r8, r8, r7 /* r8 = number of rows + number of col */ + + mov r7, #0x1 + mov r8, r7, LSL r8 /* r8 = (1 << r8) */ + + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #SDRAM_WIDTH_OFFSET /* offset 13 */ + bl _i2cRead + mul r8, r7, r8 + + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #NUM_OF_BANKS_OFFSET /* offset 17 */ + bl _i2cRead + mul r7, r8, r7 + + mov PC, r13 + +/**************************/ +_get_width: + mov r13, LR /* Save link register */ + + /* Get SDRAM width (SPD offset 13) */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #SDRAM_WIDTH_OFFSET + bl _i2cRead /* result in r7 */ + + mov PC, r13 + +/**************************/ +_get_CAL: + mov r13, LR /* Save link register */ + + /* Set maximum CL supported by DIMM */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #SUPPORTED_CL_OFFSET /* offset 18 */ + bl _i2cRead + + mov PC, r13 + +/**************************/ +/* R8 - sdram configuration register. + * Return value in flag if no-registered then Z-flag is set + */ +_is_Registered: + mov r13, LR /* Save link register */ + + /* Get registered/non registered info from DIMM */ + tst r8, #SDRAM_DTYPE_DDR2 + bne regDdr2 + +regDdr1: + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #SDRAM_MODULES_ATTR_OFFSET + bl _i2cRead /* result in r7 */ + tst r7, #0x2 + b exit +regDdr2: + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #DIMM_TYPE_INFO_OFFSET + bl _i2cRead /* result in r7 */ + tst r7, #0x11 /* DIMM type = regular RDIMM (0x01) */ + /* or Mini-RDIMM (0x10) */ +exit: + mov PC, r13 + + +#endif diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.S new file mode 100644 index 0000000000..e34ebbf298 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.S @@ -0,0 +1,668 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/******************************************************************************* +* mvDramIfBasicAsm.s +* +* DESCRIPTION: +* Memory full detection and best timing configuration is done in +* C code. C runtime environment requires a stack. This module API +* initialize DRAM interface chip select 0 for basic functionality for +* the use of stack. +* The module API assumes DRAM information is stored in I2C EEPROM reside +* in a given I2C address MV_BOARD_DIMM0_I2C_ADDR. The I2C EEPROM +* internal data structure is assumed to be orgenzied in common DRAM +* vendor SPD structure. +* NOTE: DFCDL values are assumed to be already initialized prior to +* this module API activity. +* +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +/* includes */ +#define MV_ASMLANGUAGE +#include "mvOsAsm.h" +#include "mvSysHwConfig.h" +#include "mvDramIfRegs.h" +#include "mvDramIfConfig.h" +#include "mvCpuIfRegs.h" +#include "pex/mvPexRegs.h" +#include "pci/mvPciRegs.h" +#include "mvCtrlEnvSpec.h" +#include "mvCtrlEnvAsm.h" +#include "cpu/mvCpuArm.h" +#include "mvCommon.h" + +/* defines */ + +/* locals */ +.data +.globl _mvDramIfConfig + +.text + +/******************************************************************************* +* _mvDramIfConfig - Basic DRAM interface initialization. +* +* DESCRIPTION: +* The function will initialize the following DRAM parameters using the +* values prepared by mvDramIfDetect routine. Values are located +* in predefined registers. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ + +_mvDramIfConfig: + + /* Save register on stack */ + cmp sp, #0 + beq no_stack_s +save_on_stack: + stmdb sp!, {r1, r2, r3, r4, r7, r11} +no_stack_s: + + /* 1) Write to SDRAM coniguration register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG1) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_CONFIG_REG) + str r4, [r1] + + /* 2) Write Dunit control low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG3) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DUNIT_CTRL_REG) + str r4, [r1] + + /* 3) Write SDRAM address control register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG4) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_ADDR_CTRL_REG) + str r4, [r1] + + /* 4) Write SDRAM bank 0 size register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG0) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_SIZE_REG(0)) + str r4, [r1] + + /* 5) Write SDRAM open pages control register */ + ldr r1, =(INTER_REGS_BASE + SDRAM_OPEN_PAGE_CTRL_REG) + ldr r4, =SDRAM_OPEN_PAGES_CTRL_REG_DV + str r4, [r1] + + /* 6) Write SDRAM timing Low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG5) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_LOW_REG) + str r4, [r1] + + /* 7) Write SDRAM timing High register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG6) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_HIGH_REG) + str r4, [r1] + + /* 8) Write SDRAM mode register */ + /* The CPU must not attempt to change the SDRAM Mode register setting */ + /* prior to DRAM controller completion of the DRAM initialization */ + /* sequence. To guarantee this restriction, it is recommended that */ + /* the CPU sets the SDRAM Operation register to NOP command, performs */ + /* read polling until the register is back in Normal operation value, */ + /* and then sets SDRAM Mode register to itÂ’s new value. */ + + /* 8.1 write 'nop' to SDRAM operation */ + mov r4, #0x5 /* 'NOP' command */ + MV_REG_WRITE_ASM(r4, r1, SDRAM_OPERATION_REG) + + /* 8.2 poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll1: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll1 + + /* 8.3 Now its safe to write new value to SDRAM Mode register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG2) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_MODE_REG) + str r4, [r1] + + /* 8.4 Make the Dunit write the DRAM its new mode */ + mov r4, #0x3 /* Mode Register Set command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* 8.5 poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll2: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll2 + +#ifndef DB_FPGA + /* Config DDR2 registers (Extended mode, ODTs and pad calibration) */ + MV_REG_READ_ASM (r4, r1, SDRAM_CONFIG_REG) + tst r4, #SDRAM_DTYPE_DDR2 + beq _extModeODTEnd +#endif /* DB_FPGA */ + + /* 9) Write SDRAM Extended mode register This operation should be */ + /* done for each memory bank */ + /* write 'nop' to SDRAM operation */ + mov r4, #0x5 /* 'NOP' command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll3: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll3 + + /* Now its safe to write new value to SDRAM Extended Mode register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG10) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_EXTENDED_MODE_REG) + str r4, [r1] + + /* Go over each of the Banks */ + ldr r3, =0 /* r3 = DRAM bank Num */ + +extModeLoop: + /* Set the SDRAM Operation Control to each of the DRAM banks */ + mov r2, r3 /* Do not swap the bank counter value */ + MV_REG_WRITE_ASM (r2, r1, SDRAM_OPERATION_CTRL_REG) + + /* Make the Dunit write the DRAM its new mode */ + mov r4, #0x4 /* Extended Mode Register Set command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll4: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll4 +#ifndef DB_FPGA + add r3, r3, #1 + cmp r3, #4 /* 4 = Number of banks */ + bne extModeLoop + +extModeEnd: + /* Config DDR2 On Die Termination (ODT) registers */ + /* Write SDRAM DDR2 ODT control low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG7) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_LOW_REG) + str r4, [r1] + + /* Write SDRAM DDR2 ODT control high register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG8) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_HIGH_REG) + str r4, [r1] + + /* Write SDRAM DDR2 Dunit ODT control register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG9) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_DUNIT_ODT_CONTROL_REG) + str r4, [r1] + +#endif /* DB_FPGA */ +_extModeODTEnd: +#ifndef DB_FPGA + /* Implement Guideline (GL# MEM-2) P_CAL Automatic Calibration */ + /* Does Not Work for Address/Control and Data Pads. */ + /* Relevant for: 88F5181-A1/B0 and 88F5281-A0 */ + + /* Read device ID */ + MV_CTRL_MODEL_GET_ASM(r3, r1); + /* Read device revision */ + MV_CTRL_REV_GET_ASM(r2, r1); + + /* Continue if OrionN */ + ldr r1, =MV_5180_DEV_ID + cmp r3, r1 + bne 1f + b glMem2End +1: + /* Continue if Orion1 and device revision B1 */ + ldr r1, =MV_5181_DEV_ID + cmp r3, r1 + bne 1f + + cmp r2, #MV_5181_B1_REV + bge glMem2End + b glMem2Start +1: + + /* Orion NAS */ + ldr r1, =MV_5182_DEV_ID + cmp r3, r1 + beq glMem2Start + + /* Orion NAS */ + ldr r1, =MV_5082_DEV_ID + cmp r3, r1 + beq glMem2Start + + /* Orion Shark */ + ldr r1, =MV_8660_DEV_ID + cmp r3, r1 + beq glMem2Start + + b glMem2End + +glMem2Start: + + /* DDR SDRAM Address/Control Pads Calibration */ + MV_REG_READ_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + /* Set Bit [31] to make the register writable */ + orr r2, r3, #SDRAM_WR_EN + + MV_REG_WRITE_ASM (r2, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + bic r3, r3, #SDRAM_WR_EN /* Make register read-only */ + bic r3, r3, #SDRAM_TUNE_EN /* Disable auto calibration */ + bic r3, r3, #SDRAM_DRVN_MASK /* Clear r1[5:0] */ + bic r3, r3, #SDRAM_DRVP_MASK /* Clear r1[11:6] */ + + /* Get the final N locked value of driving strength [22:17] */ + mov r1, r3 + mov r1, r1, LSL #9 + mov r1, r1, LSR #26 /* r1[5:0] = r3[22:17] */ + orr r1, r1, r1, LSL #6 /* r1[11:6] = r1[5:0] */ + + /* Write to both bits [5:0] and bits [11:6] */ + orr r3, r3, r1 + + MV_REG_WRITE_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + + /* DDR SDRAM Data Pads Calibration */ + MV_REG_READ_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG) + + /* Set Bit [31] to make the register writable */ + orr r2, r3, #SDRAM_WR_EN + + MV_REG_WRITE_ASM (r2, r1, SDRAM_DATA_PADS_CAL_REG) + + bic r3, r3, #SDRAM_WR_EN /* Make register read-only */ + bic r3, r3, #SDRAM_TUNE_EN /* Disable auto calibration */ + bic r3, r3, #SDRAM_DRVN_MASK /* Clear r1[5:0] */ + bic r3, r3, #SDRAM_DRVP_MASK /* Clear r1[11:6] */ + + /* Get the final N locked value of driving strength [22:17] */ + mov r1, r3 + mov r1, r1, LSL #9 + mov r1, r1, LSR #26 + orr r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17] */ + + /* Write to both bits [5:0] and bits [11:6] */ + orr r3, r3, r1 + + MV_REG_WRITE_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG) + +glMem2End: + + + /* Implement Guideline (GL# MEM-3) Drive Strength Value */ + /* Relevant for: 88F5181-A1/B0/B1, 88F5281-A0/B0/C/D, 88F5182, */ + /* 88F5082, 88F5181L, 88F6082/L, 88F6183, 88F6183L */ + + /* Get SDRAM Config value */ + MV_REG_READ_ASM (r2, r1, SDRAM_CONFIG_REG) + + /* Get DIMM type */ + tst r2, #SDRAM_DTYPE_DDR2 + beq ddr1StrengthVal + +ddr2StrengthVal: + ldr r4, =DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV + ldr r2, =DDR2_DATA_PAD_STRENGTH_TYPICAL_DV + b setDrvStrength +ddr1StrengthVal: + ldr r4, =DDR1_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV + ldr r2, =DDR1_DATA_PAD_STRENGTH_TYPICAL_DV + +setDrvStrength: + /* DDR SDRAM Address/Control Pads Calibration */ + MV_REG_READ_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + orr r3, r3, #SDRAM_WR_EN /* Make register writeable */ + + MV_REG_WRITE_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG) + HTOLL(r3,r1) + + bic r3, r3, #SDRAM_WR_EN /* Make register read-only */ + bic r3, r3, #SDRAM_PRE_DRIVER_STRENGTH_MASK + orr r3, r4, r3 /* Set default value for DDR */ + + MV_REG_WRITE_ASM (r3, r1, SDRAM_ADDR_CTRL_PADS_CAL_REG) + + + /* DDR SDRAM Data Pads Calibration */ + MV_REG_READ_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG) + + orr r3, r3, #SDRAM_WR_EN /* Make register writeable */ + + MV_REG_WRITE_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG) + HTOLL(r3,r1) + + bic r3, r3, #SDRAM_WR_EN /* Make register read-only */ + bic r3, r3, #SDRAM_PRE_DRIVER_STRENGTH_MASK + orr r3, r2, r3 /* Set default value for DDR */ + + MV_REG_WRITE_ASM (r3, r1, SDRAM_DATA_PADS_CAL_REG) + +#if !defined(MV_88W8660) && !defined(MV_88F6183) && !defined(MV_88F6183L) + /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */ + /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0/C/D, 88F5182 */ + /* 88F5082, 88F5181L, 88F6082/L */ + + /* Calc the absolute address of the _cpuARMDDRCLK[] in the boot flash */ + ldr r7, = _cpuARMDDRCLK + ldr r4, =_start + sub r7, r7, r4 + add r7, r7, #CFG_MONITOR_BASE + + /* Get the "sample on reset" register for the DDR frequancy */ + MV_REG_READ_ASM (r4, r1, MPP_SAMPLE_AT_RESET) + ldr r1, =MSAR_ARMDDRCLCK_MASK + and r1, r4, r1 +#if 0 /* YOTAM TO BE FIX */ + mov r1, r1, LSR #MSAR_ARMDDRCLCK_OFFS +#endif + + /* Read device ID */ + MV_CTRL_MODEL_GET_ASM(r3, r2); + + /* Continue if TC90 */ + ldr r2, =MV_1281_DEV_ID + cmp r3, r2 + beq armClkMsb + + /* Continue if Orion2 */ + ldr r2, =MV_5281_DEV_ID + cmp r3, r2 +#if 0 /* YOTAM TO BE FIX */ + bne 1f +#endif + +armClkMsb: +#if 0 /* YOTAM TO BE FIX */ + tst r4, #MSAR_ARMDDRCLCK_H_MASK + beq 1f + orr r1, r1, #BIT4 +1: + ldr r4, =MV_CPU_ARM_CLK_ELM_SIZE + mul r1, r4, r1 + add r7, r7, r1 + add r7, r7, #MV_CPU_ARM_CLK_DDR_OFF + ldr r1, [r7] +#endif + + /* Get SDRAM Config value */ + MV_REG_READ_ASM (r2, r4, SDRAM_CONFIG_REG) + + /* Get DIMM type */ + tst r2, #SDRAM_DTYPE_DDR2 + beq ddr1FtdllVal + +ddr2FtdllVal: + ldr r2, =MV_5281_DEV_ID + cmp r3, r2 + bne 2f + MV_CTRL_REV_GET_ASM(r3, r2) + cmp r3, #MV_5281_D0_REV + beq orin2_d0_ddr2_ftdll_val + cmp r3, #MV_5281_D1_REV + beq orin2_d1_ddr2_ftdll_val + cmp r3, #MV_5281_D2_REV + beq orin2_d1_ddr2_ftdll_val + b ddr2_default_val + +/* Set Orion 2 D1 ftdll values for DDR2 */ +orin2_d1_ddr2_ftdll_val: + ldr r4, =FTDLL_DDR2_250MHZ_5281_D1 + ldr r7, =_250MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_200MHZ_5281_D1 + ldr r7, =_200MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_166MHZ_5281_D0 + ldr r7, =_166MHz + cmp r1, r7 + beq setFtdllReg + b ddr2_default_val + +/* Set Orion 2 D0 ftdll values for DDR2 */ +orin2_d0_ddr2_ftdll_val: + ldr r4, =FTDLL_DDR2_250MHZ_5281_D0 + ldr r7, =_250MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_200MHZ_5281_D0 + ldr r7, =_200MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_166MHZ_5281_D0 + ldr r7, =_166MHz + cmp r1, r7 + beq setFtdllReg + b ddr2_default_val +2: + ldr r2, =MV_5182_DEV_ID + cmp r3, r2 + bne 3f + +/* Set Orion nas ftdll values for DDR2 */ +orin_nas_ftdll_val: + ldr r4, =FTDLL_DDR2_166MHZ_5182 + ldr r7, =_166MHz + cmp r1, r7 + beq setFtdllReg + +/* default values for all other devices */ +3: +ddr2_default_val: + ldr r4, =FTDLL_DDR2_250MHZ + ldr r7, =_250MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_200MHZ + ldr r7, =_200MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_166MHZ + ldr r7, =_166MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR2_133MHZ + ldr r7, =_133MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =0 + b setFtdllReg + +ddr1FtdllVal: + ldr r2, =MV_5281_DEV_ID + cmp r3, r2 + bne 2f + MV_CTRL_REV_GET_ASM(r3, r2) + cmp r3, #MV_5281_D0_REV + bge orin2_ddr1_ftdll_val + b ddr1_default_val + +/* Set Orion 2 D0 and above ftdll values for DDR1 */ +orin2_ddr1_ftdll_val: + ldr r4, =FTDLL_DDR1_200MHZ_5281_D0 + ldr r7, =_200MHz + cmp r1, r7 + beq setFtdllReg + ldr r4, =FTDLL_DDR1_166MHZ_5281_D0 + ldr r7, =_166MHz + cmp r1, r7 + beq setFtdllReg + b ddr1_default_val +2: + ldr r2, =MV_5181_DEV_ID + cmp r3, r2 + bne 3f + MV_CTRL_REV_GET_ASM(r3, r2) + cmp r3, #MV_5181_B1_REV + bge orin1_ddr1_ftdll_val + b ddr1_default_val + +/* Set Orion 1 ftdll values for DDR1 */ +orin1_ddr1_ftdll_val: + ldr r4, =FTDLL_DDR1_166MHZ_5181_B1 + ldr r7, =_166MHz + cmp r1, r7 + beq setFtdllReg +3: +ddr1_default_val: + ldr r4, =FTDLL_DDR1_133MHZ + ldr r7, =_133MHz + cmp r1, r7 + beq setFtdllReg + + ldr r4, =FTDLL_DDR1_166MHZ + ldr r7, =_166MHz + cmp r1, r7 + beq setFtdllReg + + ldr r4, =FTDLL_DDR1_200MHZ + ldr r7, =_200MHz + cmp r1, r7 + beq setFtdllReg + + ldr r4, =0 + +setFtdllReg: + + MV_REG_WRITE_ASM (r4, r1, SDRAM_FTDLL_CONFIG_REG) + HTOLL(r4,r1) + bic r4, r4, #1 + MV_REG_WRITE_ASM (r4, r1, SDRAM_FTDLL_CONFIG_REG) + +#endif /* !defined(MV_88W8660) && !defined(MV_88F6183) && !defined(MV_88F6183L) */ +#endif /* DB_FPGA */ + +restoreTmpRegs: + /* Restore the registers we used to save the DDR detect values */ + + ldr r4, =DRAM_BUF_REG0_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG0) + + ldr r4, =DRAM_BUF_REG1_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG1) + + ldr r4, =DRAM_BUF_REG2_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG2) + + ldr r4, =DRAM_BUF_REG3_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG3) + + ldr r4, =DRAM_BUF_REG4_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG4) + + ldr r4, =DRAM_BUF_REG5_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG5) + + ldr r4, =DRAM_BUF_REG6_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG6) + + ldr r4, =DRAM_BUF_REG7_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG7) + + ldr r4, =DRAM_BUF_REG8_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG8) + + ldr r4, =DRAM_BUF_REG9_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG9) + + ldr r4, =DRAM_BUF_REG10_DV + MV_REG_WRITE_ASM (r4, r1, DRAM_BUF_REG10) + + + /* Restore registers */ + /* Save register on stack */ + cmp sp, #0 + beq no_stack_l +load_from_stack: + ldmia sp!, {r1, r2, r3, r4, r7, r11} +no_stack_l: + + mov pc, lr + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt new file mode 100644 index 0000000000..5f39390c41 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.4 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S new file mode 100644 index 0000000000..76723816d5 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfBasicInit.S @@ -0,0 +1,986 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#define _ASMLANGUAGE +#define MV_ASMLANGUAGE +#include "mvSysHwConfig.h" +#include "mvOsAsm.h" +#include "boardEnv/mvBoardEnvSpec.h" +#include "ctrlEnv/sys/mvCpuIfRegs.h" +#include "mvDramIfConfig.h" +#include "mvDramIfRegs.h" +#include "pex/mvPexRegs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "ctrlEnv/mvCtrlEnvAsm.h" +#include "mvCommon.h" + +/* defines */ + +#if defined(MV_STATIC_DRAM_ON_BOARD) +.globl dramBoot1 +dramBoot1: + .word 0 + +/****************************************************************************** +* +* +* +* +*******************************************************************************/ +#if defined(DB_MV78XX0) || defined(DB_MV88F632X) +/* DDR2 boards 512MB 333MHz */ +#define STATIC_SDRAM0_BANK0_SIZE 0x1ffffff1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43048C30 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000652 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x38543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000FFFF /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x00000088 /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x22125441 /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000A29 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000E80F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000040 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ + +#elif defined(RD_MV78XX0_AMC) +/* On board DDR2 512MB 400MHz CL5 */ +#define STATIC_SDRAM0_BANK0_SIZE 0x1ffffff1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43008C30 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000652 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x38543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000F07F /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x000000DD /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x23135441 /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000A32 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000EB0F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000040 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ + +#elif defined(RD_MV78XX0_H3C) +/* DDR2 boards 512MB 333MHz */ +#define STATIC_SDRAM0_BANK0_SIZE 0x1ffffff1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43048a25 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000652 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x38543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000F07F /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x00000088 /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x2202444e /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000A22 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000EB0F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000040 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ + +#elif defined(RD_MV78XX0_PCAC) +/* DDR2 boards 256MB 200MHz */ +#define STATIC_SDRAM0_BANK0_SIZE 0x0ffffff1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43000a25 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000652 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x38543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000F07F /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x000000DD /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x2202444e /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000822 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000EB0F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000040 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ + +#else +/* DDR2 MV88F6281 boards 256MB 400MHz */ +#define STATIC_SDRAM0_BANK0_SIZE 0x0FFFFFF1 /* 0x1504 */ +#define STATIC_SDRAM_CONFIG 0x43000c30 /* 0x1400 */ +#define STATIC_SDRAM_MODE 0x00000C52 /* 0x141c */ +#define STATIC_DUNIT_CTRL_LOW 0x39543000 /* 0x1404 */ +#define STATIC_DUNIT_CTRL_HI 0x0000F1FF /* 0x1424 */ +#define STATIC_SDRAM_ADDR_CTRL 0x000000cc /* 0x1410 */ +#define STATIC_SDRAM_TIME_CTRL_LOW 0x22125451 /* 0x1408 */ +#define STATIC_SDRAM_TIME_CTRL_HI 0x00000A33 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x003C0000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000F80F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000042 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00085520 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00008552 /* 0x147C */ +#endif /* MV78XX0 */ + + .globl _mvDramIfStaticInit +_mvDramIfStaticInit: + + mov r11, LR /* Save link register */ + mov r10, r2 + +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) + orr r6, r6, #BIT4 /* Enable 2T mode */ + bic r6, r6, #BIT6 /* clear ctrlPos */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) +#endif + + /*DDR SDRAM Initialization Control */ + ldr r6, =DSICR_INIT_EN + MV_REG_WRITE_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG) +2: MV_REG_READ_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG) + and r6, r6, #DSICR_INIT_EN + cmp r6, #0 + bne 2b + + /* If we boot from NAND jump to DRAM address */ + mov r5, #1 + ldr r6, =dramBoot1 + str r5, [r6] /* We started executing from DRAM */ + + ldr r6, dramBoot1 + cmp r6, #0 + bne 1f + + /* set all dram windows to 0 */ + mov r6, #0 + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,0)) + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,1)) + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,2)) + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,3)) + ldr r6, = STATIC_SDRAM0_BANK0_SIZE + MV_REG_WRITE_ASM(r6, r5, SDRAM_SIZE_REG(0,0)) + + + /* set all dram configuration in temp registers */ + ldr r6, = STATIC_SDRAM0_BANK0_SIZE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG0) + ldr r6, = STATIC_SDRAM_CONFIG + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG1) + ldr r6, = STATIC_SDRAM_MODE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG2) + ldr r6, = STATIC_DUNIT_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG3) + ldr r6, = STATIC_SDRAM_ADDR_CTRL + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG4) + ldr r6, = STATIC_SDRAM_TIME_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG5) + ldr r6, = STATIC_SDRAM_TIME_CTRL_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG6) + ldr r6, = STATIC_SDRAM_ODT_CTRL_LOW + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG7) + ldr r6, = STATIC_SDRAM_ODT_CTRL_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG8) + ldr r6, = STATIC_SDRAM_DUNIT_ODT_CTRL + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG9) + ldr r6, = STATIC_SDRAM_EXT_MODE + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG10) + ldr r6, = STATIC_SDRAM_DDR2_TIMING_LO + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG11) + ldr r6, = STATIC_SDRAM_DDR2_TIMING_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG12) +#ifndef MV_NAND_BOOT + ldr r6, = STATIC_DUNIT_CTRL_HI + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG13) +#endif + + ldr sp,=0 + bl _mvDramIfConfig + ldr r0, =0 +#ifdef MV78XX0 + bl _mvDramIfEccMemInit +#endif +1: + mov r2, r10 + mov PC, r11 /* r11 is saved link register */ + +#else /* #if defined(MV_STATIC_DRAM_ON_BOARD) */ + +.globl dramBoot1 +dramBoot1: + .word 0 + +/******************************************************************************* +* mvDramIfBasicInit - Basic initialization of DRAM interface +* +* DESCRIPTION: +* The function will initialize the DRAM for basic usage. The function +* will use the TWSI assembly API to extract DIMM parameters according +* to which DRAM interface will be initialized. +* The function referes to the following DRAM parameters: +* 1) DIMM is registered or not. +* 2) DIMM width detection. +* 3) DIMM density. +* +* INPUT: +* r3 - required size for initial DRAM. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +* Note: +* r4 holds I2C EEPROM address +* r5 holds SDRAM register base address +* r7 holds returned values +* r8 holds SDRAM various configuration registers value. +* r11 holds return function address. +*******************************************************************************/ +/* Setting the offsets of the I2C registers */ +#define DIMM_TYPE_OFFSET 2 +#define NUM_OF_ROWS_OFFSET 3 +#define NUM_OF_COLS_OFFSET 4 +#define NUM_OF_RANKS 5 +#define DIMM_CONFIG_TYPE 11 +#define SDRAM_WIDTH_OFFSET 13 +#define NUM_OF_BANKS_OFFSET 17 +#define SUPPORTED_CL_OFFSET 18 +#define DIMM_TYPE_INFO_OFFSET 20 /* DDR2 only */ +#define SDRAM_MODULES_ATTR_OFFSET 21 +#define RANK_SIZE_OFFSET 31 + +#define DRAM_DEV_DENSITY_128M 128 +#define DRAM_DEV_DENSITY_256M 256 +#define DRAM_DEV_DENSITY_512M 512 +#define DRAM_DEV_DENSITY_1G 1024 +#define DRAM_DEV_DENSITY_2G 2048 + +#define DRAM_RANK_DENSITY_128M 0x20 +#define DRAM_RANK_DENSITY_256M 0x40 +#define DRAM_RANK_DENSITY_512M 0x80 +#define DRAM_RANK_DENSITY_1G 0x1 +#define DRAM_RANK_DENSITY_2G 0x2 + + .globl _mvDramIfBasicInit + .extern _i2cInit +_mvDramIfBasicInit: + + mov r11, LR /* Save link register */ + + /* Set Dunit high control register */ + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG) + orr r6, r6, #BIT7 /* SDRAM__D2P_EN */ + orr r6, r6, #BIT8 /* SDRAM__P2D_EN */ +#ifdef MV78XX0 + orr r6, r6, #BIT9 /* SDRAM__ADD_HALF_FCC_EN */ + orr r6, r6, #BIT10 /* SDRAM__PUP_ZERO_SKEW_EN */ + orr r6, r6, #BIT11 /* SDRAM__WR_MASH_DELAY_EN */ +#endif + MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG) + +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) + orr r6, r6, #BIT4 /* Enable 2T mode */ + bic r6, r6, #BIT6 /* clear ctrlPos */ + MV_REG_WRITE_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) +#endif + + /*DDR SDRAM Initialization Control */ + ldr r6, =DSICR_INIT_EN + MV_REG_WRITE_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG) +2: MV_REG_READ_ASM (r6, r1, DDR_SDRAM_INIT_CTRL_REG) + and r6, r6, #DSICR_INIT_EN + cmp r6, #0 + bne 2b + + mov r5, #1 + ldr r8, =dramBoot1 + str r5, [r8] /* We started executing from DRAM */ + + /* If we boot from NAND jump to DRAM address */ + ldr r8, dramBoot1 + cmp r8, #0 + movne pc, r11 + + bl _i2cInit /* Initialize TWSI master */ + + /* Check if we have more then 1 dimm */ + ldr r6, =0 + MV_REG_WRITE_ASM (r6, r1, DRAM_BUF_REG14) +#ifdef MV78XX0 + bl _is_Second_Dimm_Exist + beq single_dimm + ldr r6, =1 + MV_REG_WRITE_ASM (r6, r1, DRAM_BUF_REG14) +single_dimm: + bl _i2cInit /* Initialize TWSI master */ +#endif + + /* Get default SDRAM Config values */ + MV_REG_READ_ASM (r8, r5, SDRAM_CONFIG_REG) + + /* Get registered/non registered info from DIMM */ + bl _is_Registered + beq nonRegistered + +setRegistered: + orr r8, r8, #SDRAM_REGISTERED /* Set registered bit(17) */ +nonRegistered: +#ifdef MV78XX0 + /* Get ECC/non ECC info from DIMM */ + bl _is_Ecc + beq setConfigReg + +setEcc: + orr r8, r8, #SDRAM_ECC_EN /* Set ecc bit(18) */ +#endif +setConfigReg: + MV_REG_WRITE_ASM (r8, r5, DRAM_BUF_REG1) + + /* Set maximum CL supported by DIMM */ + bl _get_CAL + + /* r7 is DIMM supported CAS (e.g: 3 --> 0x1C) */ + clz r6, r7 + rsb r6, r6, #31 /* r6 = the bit number of MAX CAS supported */ + +casDdr2: + ldr r7, =0x41 /* stBurstInDel|stBurstOutDel field value */ + ldr r3, =0x53 /* stBurstInDel|stBurstOutDel registered value*/ + ldr r8, =0x32 /* Assuming MAX CL = 3 */ + cmp r6, #3 /* If CL = 3 break */ + beq casDdr2Cont + + ldr r7, =0x53 /* stBurstInDel|stBurstOutDel field value */ + ldr r3, =0x65 /* stBurstInDel|stBurstOutDel registered value*/ + ldr r8, =0x42 /* Assuming MAX CL = 4 */ + cmp r6, #4 /* If CL = 4 break */ + beq casDdr2Cont + + ldr r7, =0x65 /* stBurstInDel|stBurstOutDel field value */ + ldr r3, =0x77 /* stBurstInDel|stBurstOutDel registered value*/ + ldr r8, =0x52 /* Assuming MAX CL = 5 */ + cmp r6, #5 /* If CL = 5 break */ + beq casDdr2Cont + + ldr r7, =0x77 /* stBurstInDel|stBurstOutDel field value */ + ldr r3, =0x89 /* stBurstInDel|stBurstOutDel registered value*/ + ldr r8, =0x62 /* Assuming MAX CL = 6 */ + cmp r6, #6 /* If CL = 5 break */ + beq casDdr2Cont + + /* This is an error. return */ + b exit_ddrAutoConfig /* This is an error !! */ +casDdr2Cont: + + /* Get default SDRAM Mode values */ + MV_REG_READ_ASM (r6, r5, SDRAM_MODE_REG) + bic r6, r6, #(BIT6 | BIT5 | BIT4) /* Clear CL filed */ + orr r6, r6, r8 + MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG2) + + /* Set Dunit control register according to max CL detected */ + MV_REG_READ_ASM (r6, r5, DRAM_BUF_REG1) + tst r6, #SDRAM_REGISTERED + beq setDunitReg + mov r7, r3 + +setDunitReg: +#ifdef MV78XX0 + /* Set SDRAM Extended Mode register for double DIMM */ + /* Check DRAM frequency for more then 267MHz set ODT Rtt to 50ohm */ + + MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG) + ldr r5, =MSAR_SYSCLCK_MASK + and r4, r4, r5 + ldr r5, =MSAR_SYSCLCK_333 + cmp r4, r5 + ble Clock333 + add r7, r7, #0x10 +Clock333: +#endif + + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_REG) + bic r6, r6, #(0xff << 20) /* Clear SBout and SBin */ + orr r6, r6, #BIT4 /* Enable 2T mode */ + bic r6, r6, #BIT6 /* clear ctrlPos */ + orr r6, r6, r7, LSL #20 + MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG3) + + /* Set Dunit high control register */ + MV_REG_READ_ASM (r6, r5, SDRAM_DUNIT_CTRL_HI_REG) + orr r6, r6, #BIT7 /* SDRAM__D2P_EN */ + orr r6, r6, #BIT8 /* SDRAM__P2D_EN */ +#ifdef MV78XX0 + orr r6, r6, #BIT9 /* SDRAM__ADD_HALF_FCC_EN */ + orr r6, r6, #BIT10 /* SDRAM__PUP_ZERO_SKEW_EN */ + orr r6, r6, #BIT11 /* SDRAM__WR_MASH_DELAY_EN */ +#endif + MV_REG_WRITE_ASM (r6, r5, DRAM_BUF_REG13) + + /* DIMM density configuration*/ + /* Density = (1 << (rowNum + colNum)) * dramWidth * dramBankNum */ +Density: + /* Get bank 0 and 1 density */ + ldr r6, =0 + bl _getDensity + + mov r8, r7 + mov r8, r8, LSR #20 /* Move density 20 bits to the right */ + /* For example 0x10000000 --> 0x1000 */ + + mov r3, #(SDRAM_DSIZE_256Mb(0) | SDRAM_DSIZE_256Mb(1)) + cmp r8, #DRAM_DEV_DENSITY_256M + beq get_bank_2_density + + mov r3, #(SDRAM_DSIZE_512Mb(0) | SDRAM_DSIZE_512Mb(1)) + cmp r8, #DRAM_DEV_DENSITY_512M + beq get_bank_2_density + + mov r3, #(SDRAM_DSIZE_1Gb(0) | SDRAM_DSIZE_1Gb(1)) + cmp r8, #DRAM_DEV_DENSITY_1G + beq get_bank_2_density + + mov r3, #(SDRAM_DSIZE_2Gb(0) | SDRAM_DSIZE_2Gb(1)) + cmp r8, #DRAM_DEV_DENSITY_2G + beq get_bank_2_density + + /* This is an error. return */ + b exit_ddrAutoConfig + +get_bank_2_density: + /* Check for second dimm */ + MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14) + cmp r6, #1 + bne get_width + + /* Get bank 2 and 3 density */ + ldr r6, =2 + bl _getDensity + + mov r8, r7 + mov r8, r8, LSR #20 /* Move density 20 bits to the right */ + /* For example 0x10000000 --> 0x1000 */ + + orr r3, r3, #(SDRAM_DSIZE_256Mb(2) | SDRAM_DSIZE_256Mb(3)) + cmp r8, #DRAM_DEV_DENSITY_256M + beq get_width + + and r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3)) + orr r3, r3, #(SDRAM_DSIZE_512Mb(2) | SDRAM_DSIZE_512Mb(3)) + cmp r8, #DRAM_DEV_DENSITY_512M + beq get_width + + and r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3)) + orr r3, r3, #(SDRAM_DSIZE_1Gb(2) | SDRAM_DSIZE_1Gb(3)) + cmp r8, #DRAM_DEV_DENSITY_1G + beq get_width + + and r3, r3, #~(SDRAM_DSIZE_MASK(2) | SDRAM_DSIZE_MASK(3)) + orr r3, r3, #(SDRAM_DSIZE_2Gb(2) | SDRAM_DSIZE_2Gb(3)) + cmp r8, #DRAM_DEV_DENSITY_2G + beq get_width + + /* This is an error. return */ + b exit_ddrAutoConfig + + /* Get SDRAM width */ +get_width: + /* Get bank 0 and 1 width */ + ldr r6, =0 + bl _get_width + + cmp r7, #8 /* x8 devices */ + beq get_bank_2_width + + orr r3, r3, #(SDRAM_ADDRSEL_X16(0) | SDRAM_ADDRSEL_X16(1)) /* x16 devices */ + cmp r7, #16 + beq get_bank_2_width + + /* This is an error. return */ + b exit_ddrAutoConfig + +get_bank_2_width: + /* Check for second dimm */ + MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14) + cmp r6, #1 + bne densCont + + /* Get bank 2 and 3 width */ + ldr r6, =2 + bl _get_width + + cmp r7, #8 /* x8 devices */ + beq densCont + + orr r3, r3, #(SDRAM_ADDRSEL_X16(2) | SDRAM_ADDRSEL_X16(3)) /* x16 devices */ + cmp r7, #16 + beq densCont + + /* This is an error. return */ + b exit_ddrAutoConfig + +densCont: + MV_REG_WRITE_ASM (r3, r5, DRAM_BUF_REG4) + + /* Set SDRAM timing control low register */ + ldr r4, =SDRAM_TIMING_CTRL_LOW_REG_DEFAULT + /* MV_REG_READ_ASM (r4, r5, SDRAM_TIMING_CTRL_LOW_REG) */ + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG5) + + /* Set SDRAM timing control high register */ + ldr r6, =SDRAM_TIMING_CTRL_HIGH_REG_DEFAULT + + MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG) + ldr r5, =MSAR_SYSCLCK_MASK + and r4, r4, r5 + ldr r5, =MSAR_SYSCLCK_333 + cmp r4, r5 + blt timingHighClock333 + orr r6, r6, #BIT9 + +timingHighClock333: + /* MV_REG_READ_ASM (r6, r5, SDRAM_TIMING_CTRL_HIGH_REG) */ + MV_REG_WRITE_ASM(r6, r5, DRAM_BUF_REG6) + + /* Check for second dimm */ + MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14) + cmp r6, #1 + bne single_dimm_odt + + /* Set SDRAM ODT control low register for double DIMM*/ + ldr r4, =DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG7) + + /* Set DUNIT ODT control register for double DIMM */ + ldr r4, =DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG9) + +#ifdef MV78XX0 + /* Set SDRAM Extended Mode register for double DIMM */ + /* Check DRAM frequency for more then 267MHz set ODT Rtt to 50ohm */ + + MV_REG_READ_ASM (r4, r5, CPU_RESET_SAMPLE_L_REG) + ldr r5, =MSAR_SYSCLCK_MASK + and r4, r4, r5 + ldr r5, =MSAR_SYSCLCK_267 + cmp r4, r5 + beq slow_dram_clock_rtt + ldr r5, =MSAR_SYSCLCK_300 + cmp r4, r5 + beq slow_dram_clock_rtt + ldr r5, =MSAR_SYSCLCK_333 + cmp r4, r5 + beq fast_dram_clock_rtt + ldr r5, =MSAR_SYSCLCK_400 + cmp r4, r5 + beq fast_dram_clock_rtt + + b slow_dram_clock_rtt + +fast_dram_clock_rtt: + ldr r4, =DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10) + b odt_config_end +#endif +slow_dram_clock_rtt: + ldr r4, =DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10) + b odt_config_end + +single_dimm_odt: + /* Set SDRAM ODT control low register */ + ldr r4, =DDR2_ODT_CTRL_LOW_CS0_CS1_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG7) + + /* Set DUNIT ODT control register */ + ldr r4, =DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG9) + + /* Set SDRAM Extended Mode register */ + ldr r4, =DDR_SDRAM_EXT_MODE_CS0_CS1_DV + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG10) + +odt_config_end: + /* SDRAM ODT control high register is left as default */ + MV_REG_READ_ASM (r4, r5, DDR2_SDRAM_ODT_CTRL_HIGH_REG) + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG8) + + /*Read CL and set the DDR2 registers accordingly */ + MV_REG_READ_ASM (r6, r5, DRAM_BUF_REG2) + and r6, r6, #SDRAM_CL_MASK + mov r4, r6 + orr r4, r4, r6, LSL #4 + orr r4, r4, r6, LSL #8 + orr r4, r4, r6, LSL #12 + mov r5, #0x30000 + add r4, r4, r5 + sub r4, r4, #0x30 + /* Set SDRAM Ddr2 Timing Low register */ + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG11) + + /* Set SDRAM Ddr2 Timing High register */ + mov r4, r4, LSR #4 + MV_REG_WRITE_ASM(r4, r5, DRAM_BUF_REG12) + +timeParamDone: + /* Close all windows */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + and r6, r6,#~SCSR_SIZE_MASK + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,1)) + and r6, r6,#~SCSR_SIZE_MASK + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,1)) + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + and r6, r6,#~SCSR_SIZE_MASK + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,3)) + and r6, r6,#~SCSR_SIZE_MASK + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,3)) + + /* Set sdram bank 0 size and enable it */ + ldr r6, =0 + bl _mvDramIfGetDimmSizeFromSpd +#ifdef MV78XX0 + /* Check DRAM width */ + MV_REG_READ_ASM (r4, r5, SDRAM_CONFIG_REG) + ldr r5, =SDRAM_DWIDTH_MASK + and r4, r4, r5 + ldr r5, =SDRAM_DWIDTH_64BIT + cmp r4, r5 + beq dram_64bit_width + /* Utilize only 32bit width */ + mov r8, r8, LSR #1 +#else + /* Utilize only 16bit width */ + mov r8, r8, LSR #2 +#endif +dram_64bit_width: + /* Update first dimm size return value R8 */ + MV_REG_READ_ASM (r5, r6, SDRAM_SIZE_REG(0,0)) + ldr r6, =~SCSR_SIZE_MASK + and r5, r5, r6 + orr r5, r5, r8 + MV_REG_WRITE_ASM(r5, r8, SDRAM_SIZE_REG(0,0)) + + /* Clear bank 2 size */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + and r6, r6,#~SCSR_SIZE_MASK + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + + /* Check for second dimm */ + MV_REG_READ_ASM (r6, r1, DRAM_BUF_REG14) + cmp r6, #1 + bne defualt_order + + /* Set sdram bank 2 size */ + ldr r6, =2 + bl _mvDramIfGetDimmSizeFromSpd +#ifdef MV78XX0 + /* Check DRAM width */ + MV_REG_READ_ASM (r4, r5, SDRAM_CONFIG_REG) + ldr r5, =SDRAM_DWIDTH_MASK + and r4, r4, r5 + ldr r5, =SDRAM_DWIDTH_64BIT + cmp r4, r5 + beq dram_64bit_width2 + /* Utilize only 32bit width */ + mov r8, r8, LSR #1 +#else + /* Utilize only 16bit width */ + mov r8, r8, LSR #2 +#endif +dram_64bit_width2: + /* Update first dimm size return value R8 */ + MV_REG_READ_ASM (r5, r6, SDRAM_SIZE_REG(0,2)) + ldr r6, =~SCSR_SIZE_MASK + and r5, r5, r6 + orr r5, r5, r8 + MV_REG_WRITE_ASM(r5, r8, SDRAM_SIZE_REG(0,2)) + + /* Close windows 1 and 3 */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,1)) + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,1)) + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,3)) + and r6, r6,#~1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,3)) + + /* Check dimm size for setting dram bank order */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + MV_REG_READ_ASM (r4, r5, SDRAM_SIZE_REG(0,2)) + and r6, r6,#SCSR_SIZE_MASK + and r4, r4,#SCSR_SIZE_MASK + cmp r6, r4 + bge defualt_order + + /* Bank 2 is biger then bank 0 */ + ldr r6,=0 + MV_REG_WRITE_ASM (r6, r5, SDRAM_BASE_ADDR_REG(0,2)) + + /* Open win 2 */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + orr r6, r6,#1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,2)) + + ldr sp,=0 + bl _mvDramIfConfig +#ifdef MV78XX0 + /* Init ECC on CS 2 */ + ldr r0, =2 + bl _mvDramIfEccMemInit +#endif + mov PC, r11 /* r11 is saved link register */ + +defualt_order: + + /* Open win 0 */ + MV_REG_READ_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + orr r6, r6,#1 + MV_REG_WRITE_ASM (r6, r5, SDRAM_SIZE_REG(0,0)) + + ldr sp,=0 + bl _mvDramIfConfig +#ifdef MV78XX0 + /* Init ECC on CS 0 */ + ldr r0, =0 + bl _mvDramIfEccMemInit +#endif +exit_ddrAutoConfig: + mov PC, r11 /* r11 is saved link register */ + + +/***************************************************************************************/ +/* r4 holds I2C EEPROM address + * r7 holds I2C EEPROM offset parameter for i2cRead and its --> returned value + * r8 holds SDRAM various configuration registers value. + * r13 holds Link register + */ +/**************************/ +_getDensity: + mov r13, LR /* Save link register */ + + /* Read SPD rank size from DIMM0 */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + + cmp r6, #0 + beq 1f + + /* Read SPD rank size from DIMM1 */ + mov r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1 */ + +1: + mov r7, #NUM_OF_ROWS_OFFSET /* offset 3 */ + bl _i2cRead + mov r8, r7 /* r8 save number of rows */ + + mov r7, #NUM_OF_COLS_OFFSET /* offset 4 */ + bl _i2cRead + add r8, r8, r7 /* r8 = number of rows + number of col */ + + mov r7, #0x1 + mov r8, r7, LSL r8 /* r8 = (1 << r8) */ + + mov r7, #SDRAM_WIDTH_OFFSET /* offset 13 */ + bl _i2cRead + mul r8, r7, r8 + + mov r7, #NUM_OF_BANKS_OFFSET /* offset 17 */ + bl _i2cRead + mul r7, r8, r7 + + mov PC, r13 + +/**************************/ +_get_width: + mov r13, LR /* Save link register */ + + /* Read SPD rank size from DIMM0 */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + + cmp r6, #0 + beq 1f + + /* Read SPD rank size from DIMM1 */ + mov r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1 */ + +1: + /* Get SDRAM width (SPD offset 13) */ + mov r7, #SDRAM_WIDTH_OFFSET + bl _i2cRead /* result in r7 */ + + mov PC, r13 + +/**************************/ +_get_CAL: + mov r13, LR /* Save link register */ + + /* Set maximum CL supported by DIMM */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #SUPPORTED_CL_OFFSET /* offset 18 */ + bl _i2cRead + + mov PC, r13 + +/**************************/ +/* R8 - sdram configuration register. + * Return value in flag if no-registered then Z-flag is set + */ +_is_Registered: + mov r13, LR /* Save link register */ +#if defined(MV645xx) + /* Get registered/non registered info from DIMM */ + tst r8, #SDRAM_DTYPE_DDR2 + bne regDdr2 + +regDdr1: + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #SDRAM_MODULES_ATTR_OFFSET + bl _i2cRead /* result in r7 */ + + tst r7, #0x2 + b exit +#endif +regDdr2: + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #DIMM_TYPE_INFO_OFFSET + bl _i2cRead /* result in r7 */ + + tst r7, #0x11 /* DIMM type = regular RDIMM (0x01) */ + /* or Mini-RDIMM (0x10) */ +exit: + mov PC, r13 + + +/**************************/ +/* Return value in flag if no-Ecc then Z-flag is set */ +_is_Ecc: + mov r13, LR /* Save link register */ + + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + mov r7, #DIMM_CONFIG_TYPE + bl _i2cRead /* result in r7 */ + + tst r7, #0x2 /* bit 1 -> Data ECC */ + mov PC, r13 + +/**************************/ +/* Return value in flag if no second DIMM then Z-flag is set */ +_is_Second_Dimm_Exist: + mov r13, LR /* Save link register */ + + mov r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM0 */ + mov r7, #DIMM_TYPE_OFFSET + bl _i2cRead /* result in r7 */ + + tst r7, #0x8 /* bit3 is '1' -> DDR 2 */ + mov PC, r13 + +/******************************************************************************* +* _mvDramIfGetDimmSizeFromSpd - read bank 0 dram's size +* +* DESCRIPTION: +* The function will read the bank 0 dram size(SPD version 1.0 and above ) +* +* INPUT: +* r6 - dram bank number. +* +* OUTPUT: +* none +*/ +_mvDramIfGetDimmSizeFromSpd: + + mov r13, LR /* Save link register */ + + /* Read SPD rank size from DIMM0 */ + mov r4, #MV_BOARD_DIMM0_I2C_ADDR /* reading from DIMM0 */ + + cmp r6, #0 + beq 1f + + /* Read SPD rank size from DIMM1 */ + mov r4, #MV_BOARD_DIMM1_I2C_ADDR /* reading from DIMM1 */ + +1: + mov r7, #RANK_SIZE_OFFSET /* offset 31 */ + bl _i2cRead + +pass_read: + ldr r8, =(0x7 << SCSR_SIZE_OFFS) + cmp r7, #DRAM_RANK_DENSITY_128M + beq endDimmSize + + ldr r8, =(0xf << SCSR_SIZE_OFFS) + cmp r7, #DRAM_RANK_DENSITY_256M + beq endDimmSize + + ldr r8, =(0x1f << SCSR_SIZE_OFFS) + cmp r7, #DRAM_RANK_DENSITY_512M + beq endDimmSize + + ldr r8, =(0x3f << SCSR_SIZE_OFFS) + cmp r7, #DRAM_RANK_DENSITY_1G + beq endDimmSize + + ldr r8, =(0x7f << SCSR_SIZE_OFFS) /* DRAM_RANK_DENSITY_2G */ +endDimmSize: + mov PC, r13 +#endif diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S new file mode 100644 index 0000000000..88527e58cc --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.S @@ -0,0 +1,528 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/******************************************************************************* +* mvDramIfBasicAsm.s +* +* DESCRIPTION: +* Memory full detection and best timing configuration is done in +* C code. C runtime environment requires a stack. This module API +* initialize DRAM interface chip select 0 for basic functionality for +* the use of stack. +* The module API assumes DRAM information is stored in I2C EEPROM reside +* in a given I2C address MV_BOARD_DIMM0_I2C_ADDR. The I2C EEPROM +* internal data structure is assumed to be orgenzied in common DRAM +* vendor SPD structure. +* NOTE: DFCDL values are assumed to be already initialized prior to +* this module API activity. +* +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +/* includes */ +#define _ASMLANGUAGE +#define MV_ASMLANGUAGE +#include "mvOsAsm.h" +#include "mvSysHwConfig.h" +#include "mvDramIfRegs.h" +#include "mvDramIfConfig.h" +#include "ctrlEnv/sys/mvCpuIfRegs.h" +#include "pex/mvPexRegs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "mvCommon.h" + +/* defines */ + +/* locals */ +.data +.globl _mvDramIfConfig +.text +.globl _mvDramIfMemInit + +/******************************************************************************* +* _mvDramIfConfig - Basic DRAM interface initialization. +* +* DESCRIPTION: +* The function will initialize the following DRAM parameters using the +* values prepared by mvDramIfDetect routine. Values are located +* in predefined registers. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ + +_mvDramIfConfig: + + /* Save register on stack */ + cmp sp, #0 + beq no_stack_s +save_on_stack: + stmdb sp!, {r1, r2, r3, r4} +no_stack_s: + + /* Dunit FTDLL Configuration Register */ + /* 0) Write to SDRAM FTDLL coniguration register */ + ldr r4, = SDRAM_FTDLL_REG_DEFAULT_LEFT; + ldr r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_LEFT_REG) + str r4, [r1] + ldr r4, = SDRAM_FTDLL_REG_DEFAULT_RIGHT; + ldr r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_RIGHT_REG) + str r4, [r1] + ldr r4, = SDRAM_FTDLL_REG_DEFAULT_UP; + ldr r1, =(INTER_REGS_BASE + SDRAM_FTDLL_CONFIG_UP_REG) + str r4, [r1] + + /* 1) Write to SDRAM coniguration register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG1) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_CONFIG_REG) + str r4, [r1] + + /* 2) Write Dunit control low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG3) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DUNIT_CTRL_REG) + str r4, [r1] + + /* 2) Write Dunit control high register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG13) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DUNIT_CTRL_HI_REG) + str r4, [r1] + + /* 3) Write SDRAM address control register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG4) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_ADDR_CTRL_REG) + str r4, [r1] +#if defined(MV_STATIC_DRAM_ON_BOARD) + /* 4) Write SDRAM bank 0 size register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG0) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_SIZE_REG(0,0)) + str r4, [r1] +#endif + + /* 5) Write SDRAM open pages control register */ + ldr r1, =(INTER_REGS_BASE + SDRAM_OPEN_PAGE_CTRL_REG) + ldr r4, =SDRAM_OPEN_PAGES_CTRL_REG_DV + str r4, [r1] + + /* 6) Write SDRAM timing Low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG5) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_LOW_REG) + str r4, [r1] + + /* 7) Write SDRAM timing High register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG6) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_TIMING_CTRL_HIGH_REG) + str r4, [r1] + + /* Config DDR2 On Die Termination (ODT) registers */ + /* Write SDRAM DDR2 ODT control low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG7) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_LOW_REG) + str r4, [r1] + + /* Write SDRAM DDR2 ODT control high register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG8) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_SDRAM_ODT_CTRL_HIGH_REG) + str r4, [r1] + + /* Write SDRAM DDR2 Dunit ODT control register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG9) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + DDR2_DUNIT_ODT_CONTROL_REG) + str r4, [r1] + + /* Write DDR2 SDRAM timing Low register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG11) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DDR2_TIMING_LO_REG) + str r4, [r1] + + /* Write DDR2 SDRAM timing High register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG12) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_DDR2_TIMING_HI_REG) + str r4, [r1] + + /* 8) Write SDRAM mode register */ + /* The CPU must not attempt to change the SDRAM Mode register setting */ + /* prior to DRAM controller completion of the DRAM initialization */ + /* sequence. To guarantee this restriction, it is recommended that */ + /* the CPU sets the SDRAM Operation register to NOP command, performs */ + /* read polling until the register is back in Normal operation value, */ + /* and then sets SDRAM Mode register to its new value. */ + + /* 8.1 write 'nop' to SDRAM operation */ + mov r4, #0x5 /* 'NOP' command */ + MV_REG_WRITE_ASM(r4, r1, SDRAM_OPERATION_REG) + + /* 8.2 poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll1: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll1 + + /* 8.3 Now its safe to write new value to SDRAM Mode register */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG2) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_MODE_REG) + str r4, [r1] + + /* 8.4 Make the Dunit write the DRAM its new mode */ + mov r4, #0x3 /* Mode Register Set command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* 8.5 poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll2: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll2 + + /* Now its safe to write new value to SDRAM Extended Mode regist */ + ldr r1, =(INTER_REGS_BASE + DRAM_BUF_REG10) + ldr r4, [r1] + ldr r1, =(INTER_REGS_BASE + SDRAM_EXTENDED_MODE_REG) + str r4, [r1] + + /* 9) Write SDRAM Extended mode register This operation should be */ + /* done for each memory bank */ + /* write 'nop' to SDRAM operation */ + mov r4, #0x5 /* 'NOP' command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll3: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll3 + /* Go over each of the Banks */ + ldr r3, =0 /* r3 = DRAM bank Num */ + +extModeLoop: + /* Set the SDRAM Operation Control to each of the DRAM banks */ + mov r4, r3 /* Do not swap the bank counter value */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_CTRL_REG) + + /* Make the Dunit write the DRAM its new mode */ + mov r4, #0x4 /* Extended Mode Register Set command */ + MV_REG_WRITE_ASM (r4, r1, SDRAM_OPERATION_REG) + + /* poll SDRAM operation. Make sure its back to normal operation */ +_sdramOpPoll4: + ldr r4, [r1] + cmp r4, #0 /* '0' = Normal SDRAM Mode */ + bne _sdramOpPoll4 + + add r3, r3, #1 + cmp r3, #4 /* 4 = Number of banks */ + bne extModeLoop + +extModeEnd: +cmp sp, #0 + beq no_stack_l + mov r1, LR /* Save link register */ +#if defined(MV78XX0) + bl _mvDramIfMemInit +#endif + mov LR,r1 /* restore link register */ +load_from_stack: + /* Restore registers */ + ldmia sp!, {r1, r2, r3, r4} +no_stack_l: + + mov pc, lr + + +/******************************************************************************* +* _mvDramIfEccMemInit - Basic DRAM ECC initialization. +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +#define XOR_CHAN0 0 /* XOR channel 0 used for memory initialization */ +#define XOR_UNIT0 0 /* XOR unit 0 used for memory initialization */ +#define XOR_ADDR_DEC_WIN0 0 /* Enable DRAM access using XOR decode window 0 */ +/* XOR engine register offsets macros */ +#define XOR_CONFIG_REG(chan) (XOR_UNIT_BASE(0) + 0x10 + ((chan) * 4)) +#define XOR_ACTIVATION_REG(chan) (XOR_UNIT_BASE(0) + 0x20 + ((chan) * 4)) +#define XOR_CAUSE_REG (XOR_UNIT_BASE(0) + 0x30) +#define XOR_ERROR_CAUSE_REG (XOR_UNIT_BASE(0) + 0x50) +#define XOR_ERROR_ADDR_REG (XOR_UNIT_BASE(0) + 0x60) +#define XOR_INIT_VAL_LOW_REG (XOR_UNIT_BASE(0) + 0x2E0) +#define XOR_INIT_VAL_HIGH_REG (XOR_UNIT_BASE(0) + 0x2E4) +#define XOR_DST_PTR_REG(chan) (XOR_UNIT_BASE(0) + 0x2B0 + ((chan) * 4)) +#define XOR_BLOCK_SIZE_REG(chan) (XOR_UNIT_BASE(0) + 0x2C0 + ((chan) * 4)) + +/* XOR Engine Address Decoding Register Map */ +#define XOR_WINDOW_CTRL_REG(unit,chan) (XOR_UNIT_BASE(unit)+(0x240 + ((chan) * 4))) +#define XOR_BASE_ADDR_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x250 + ((winNum) * 4))) +#define XOR_SIZE_MASK_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x270 + ((winNum) * 4))) + +.globl _mvDramIfEccMemInit +/******************************************************************************* +* _mvDramIfEccMemInit - mem init for dram cs +* +* DESCRIPTION: +* This function will clean the cs by ussing the XOR mem init. +* +* INPUT: +* r0 - dram bank number. +* +* OUTPUT: +* none +*/ +_mvDramIfEccMemInit: + + /* Save register on stack */ + cmp sp, #0 + beq no_stack_s1 +save_on_stack1: + stmdb sp!, {r0,r1, r2, r3, r4, r5, r6} +no_stack_s1: + + ldr r1, = 0 + + /* Disable all XOR address decode windows to avoid possible overlap */ + MV_REG_WRITE_ASM (r1, r5, (XOR_WINDOW_CTRL_REG(XOR_UNIT0,XOR_CHAN0))) + + /* Init r5 to first XOR_SIZE_MASK_REG */ + mov r5, r0, LSL #3 + add r5, r5,#0x1500 + add r5, r5,#0x04 + add r5, r5,#(INTER_REGS_BASE) + ldr r6, [r5] + HTOLL(r6,r5) + MV_REG_WRITE_ASM (r6, r5, XOR_SIZE_MASK_REG(XOR_UNIT0,XOR_ADDR_DEC_WIN0)) + + mov r5, r0, LSL #3 + add r5, r5,#0x1500 + add r5, r5,#(INTER_REGS_BASE) + ldr r6, [r5] + /* Update destination & size */ + MV_REG_WRITE_ASM(r6, r5, XOR_DST_PTR_REG(XOR_CHAN0)) + HTOLL(r6,r5) + /* Init r6 to first XOR_BASE_ADDR_REG */ + ldr r4, = 0xf + ldr r5, = 0x1 + mov r5, r5, LSL r0 + bic r4, r4, r5 + mov r4, r4, LSL #8 + + orr r6, r6, r4 + MV_REG_WRITE_ASM (r6, r5, XOR_BASE_ADDR_REG(XOR_UNIT0,XOR_ADDR_DEC_WIN0)) + + ldr r6, = 0xff0001 + MV_REG_WRITE_ASM (r6, r5, XOR_WINDOW_CTRL_REG(XOR_UNIT0,XOR_CHAN0)) + + /* Configure XOR engine for memory init function. */ + MV_REG_READ_ASM (r6, r5, XOR_CONFIG_REG(XOR_CHAN0)) + and r6, r6, #~0x7 /* Clear operation mode field */ + orr r6, r6, #0x4 /* Set operation to memory init */ + MV_REG_WRITE_ASM(r6, r5, XOR_CONFIG_REG(XOR_CHAN0)) + + /* Set initVal in the XOR Engine Initial Value Registers */ + ldr r6, = 0xfeedfeed + MV_REG_WRITE_ASM(r6, r5, XOR_INIT_VAL_LOW_REG) + ldr r6, = 0xfeedfeed + MV_REG_WRITE_ASM(r6, r5, XOR_INIT_VAL_HIGH_REG) + + /* Set block size using DRAM bank size */ + + mov r5, r0, LSL #3 + add r5, r5,#0x1500 + add r5, r5,#0x04 + add r5, r5,#(INTER_REGS_BASE) + + ldr r6, [r5] + HTOLL(r6,r5) + and r6, r6, #SCSR_SIZE_MASK + mov r5, r6, LSR #SCSR_SIZE_OFFS + add r5, r5, #1 + mov r6, r5, LSL #SCSR_SIZE_OFFS + MV_REG_WRITE_ASM(r6, r5, XOR_BLOCK_SIZE_REG(XOR_CHAN0)) + + /* Clean interrupt cause*/ + MV_REG_WRITE_ASM(r1, r5, XOR_CAUSE_REG) + + /* Clean error interrupt cause*/ + MV_REG_READ_ASM(r6, r5, XOR_ERROR_CAUSE_REG) + MV_REG_READ_ASM(r6, r5, XOR_ERROR_ADDR_REG) + + /* Start transfer */ + MV_REG_READ_ASM (r6, r5, XOR_ACTIVATION_REG(XOR_CHAN0)) + orr r6, r6, #0x1 /* Preform start command */ + MV_REG_WRITE_ASM(r6, r5, XOR_ACTIVATION_REG(XOR_CHAN0)) + + /* Wait for engine to finish */ +waitForComplete: + MV_REG_READ_ASM(r6, r5, XOR_CAUSE_REG) + and r6, r6, #2 + cmp r6, #0 + beq waitForComplete + + /* Clear all error report registers */ + MV_REG_WRITE_ASM(r1, r5, SDRAM_SINGLE_BIT_ERR_CNTR_REG) + MV_REG_WRITE_ASM(r1, r5, SDRAM_DOUBLE_BIT_ERR_CNTR_REG) + + MV_REG_WRITE_ASM(r1, r5, SDRAM_ERROR_CAUSE_REG) + + cmp sp, #0 + beq no_stack_l1 +load_from_stack1: + ldmia sp!, {r0, r1, r2, r3, r4, r5, r6} +no_stack_l1: + mov pc, lr + + +/******************************************************************************* +* mvDramIfMemInit - Use XOR to clear all memory. +* +* DESCRIPTION: +* Use assembler function _mvDramIfEccMemInit to fill all memory with FEADFEAD pattern. +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +#if defined(MV78XX0) + +_mvDramIfMemInit: + stmdb sp!, {r0,r1, r2, r3, r4, r5, r6} + mov r6, LR /* Save link register */ + /* Check if dram bank 0 has to be init for ECC */ + MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,0)) + and r3, r0, #SCSR_WIN_EN + cmp r3, #0 + beq no_bank_0 + MV_REG_READ_ASM(r0, r5, SDRAM_BASE_ADDR_REG(0,0)) + cmp r0, #0 + beq no_bank_0 + mov r0,#0 + bl _mvDramIfEccMemInit + +no_bank_0: + /* Check if dram bank 1 has to be init for ECC */ + MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,1)) + and r0, r0, #SCSR_WIN_EN + cmp r0, #0 + beq no_bank_1 + mov r0,#1 + bl _mvDramIfEccMemInit +no_bank_1: + /* Check if dram bank 2 has to be init for ECC */ + MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,2)) + and r0, r0, #SCSR_WIN_EN + cmp r0, #0 + beq no_bank_2 + MV_REG_READ_ASM(r0, r5, SDRAM_BASE_ADDR_REG(0,2)) + cmp r0, #0 + beq no_bank_2 + mov r0,#2 + bl _mvDramIfEccMemInit + +no_bank_2: + /* Check if dram bank 3 has to be init for ECC */ + MV_REG_READ_ASM (r0, r5, SDRAM_SIZE_REG(0,3)) + and r0, r0, #SCSR_WIN_EN + cmp r0, #0 + beq no_bank_3 + mov r0,#3 + bl _mvDramIfEccMemInit +no_bank_3: + mov LR ,r6 /* restore link register */ + ldmia sp!, {r0, r1, r2, r3, r4, r5, r6} + mov pc, lr +#endif + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvCompVer.txt new file mode 100644 index 0000000000..5f39390c41 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.4 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvCompVer.txt new file mode 100644 index 0000000000..5f39390c41 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.4 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvCompVer.txt new file mode 100644 index 0000000000..3afa556b6e --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.3 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvCompVer.txt new file mode 100644 index 0000000000..0f060260e9 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.2 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvCompVer.txt new file mode 100644 index 0000000000..5f39390c41 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.4 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvCompVer.txt new file mode 100644 index 0000000000..3afa556b6e --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.3 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvCompVer.txt new file mode 100644 index 0000000000..3afa556b6e --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.3 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvCompVer.txt b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvCompVer.txt new file mode 100644 index 0000000000..40fea93cf4 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvCompVer.txt @@ -0,0 +1,4 @@ +Global HAL Version: FEROCEON_HAL_3_1_7 +Unit HAL Version: 3.1.5 +Description: This component includes an implementation of the unit HAL drivers + diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiEeprom.S b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiEeprom.S new file mode 100644 index 0000000000..9d81ef2a6b --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiEeprom.S @@ -0,0 +1,457 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +/* includes */ +#define MV_ASMLANGUAGE +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "boardEnv/mvBoardEnvSpec.h" +#include "mvOsAsm.h" +#include "mvTwsiSpec.h" +#include "mvSysHwConfig.h" +#include "ctrlEnv/sys/mvCpuIfRegs.h" +#include "mvCommon.h" + +#define I2C_CH MV_BOARD_DIMM_I2C_CHANNEL + +/* defines */ +/* defines */ + + + .data + .global _i2cInit + .global _i2cRead + + .text + +/******************************************************************************* +* _i2cInit - Initialize TWSI interface +* +* DESCRIPTION: +* The function performs TWSI interface initialization. It resets the +* TWSI state machine and initialize its clock to 100KHz assuming Tclock +* of 133MHz. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +_i2cInit: + mov r9, LR /* Save link register */ + mov r0, #0 /* Make sure r0 is zero */ + + /* Reset the i2c Mechanism first */ + MV_REG_WRITE_ASM (r0, r1, TWSI_SOFT_RESET_REG(I2C_CH)) + + bl _twsiDelay + bl _twsiDelay + + /* Initializing the I2C mechanism. Assuming Tclock frequency */ + /* of 166MHz. The I2C frequency in that case will be 100KHz. */ + /* For this settings, M = 9 and N = 3. Set the baud-rate with the */ + /* value of 0x2b (freq of ==> 100KHz */ + /* see spec for more details about the calculation of this value) */ + mov r6, #(9 << 3 | 3) + MV_REG_WRITE_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH)) + + /* Enable the I2C master */ + /* Enable TWSI interrupt in main mask reg */ + mov r6, #0xC4 + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + + /* Let the slow TWSI machine get used to the idea that it is enabled */ + bl _twsiDelay + + + mov PC, r9 /* r9 is saved link register */ + +/******************************************************************************* +* _twsiDelay - Perform delay. +* +* DESCRIPTION: +* The function performs a delay to enable TWSI logic to stable. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +_twsiDelay: + mov r10, #0x100000 /*was 0x400*/ + +_twsiDelayLoop: + subs r10, r10, #1 + bne _twsiDelayLoop + + mov PC, LR + +/******************************************************************************* +* _i2cRead - Read byte from I2C EEPROM device. +* +* DESCRIPTION: +* The function returns a byte from I2C EEPROM device. +* The EEPROM device is 7-bit address type. +* +* INPUT: +* r4 has the DIMM0 base address with shift 1 bit to the left +* r7 has the EEPROM offset +* +* OUTPUT: +* None. +* +* RETURN: +* r4 returns '0' if address can not be read. +* r7 has byte value in case read is successful. +* +*******************************************************************************/ +_i2cRead: + mov r9, LR /* Save link register */ + + /* Transmit the device address and desired offset within the EEPROM. */ + + /* Generate Start Bit */ + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + orr r6, r6, #TWSI_CONTROL_START_BIT + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + + /* Wait for the interrupt flag (bit3) to be set */ + mov r10, #0x50000 +loop_1: + subs r10, r10, #1 + beq loop_1_timeout +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH)) + tst r6, #BIT2 +#else + MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG) + tst r6, #BIT5 +#endif + beq loop_1 + +loop_1_timeout: + + /* Wait for the start bit to be reset by HW */ + mov r10, #0x50000 +loop_2: + subs r10, r10, #1 + beq loop_2_timeout + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + tst r6, #TWSI_CONTROL_START_BIT + bne loop_2 + +loop_2_timeout: + + /* Wait for the status TWSI_START_CONDITION_TRA = 0x8 */ + mov r10, #0x50000 +loop_3: + subs r10, r10, #1 + beq loop_3_timeout + MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH)) + cmp r6, #0x08 + bne loop_3 + +loop_3_timeout: + + /* writing the address of (DIMM0/1 << 1) with write indication */ + mov r6, r4, LSL #1 /* Write operation address bit 0 must be 0 */ + MV_REG_WRITE_ASM (r6, r1, TWSI_DATA_REG(I2C_CH)) + + bl _twsiDelay + /* Clear the interrupt flag */ + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bl _twsiDelay + + /* Waiting for the interrupt flag to be set which means that the + address has been transmitted */ +loop_4: +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH)) + tst r6, #BIT2 +#else + MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG) + tst r6, #BIT5 +#endif + beq loop_4 /* if tst = 0, then the bit is not set yet */ + + /* Wait for status TWSI_ADDR_PLUS_WRITE_BIT_TRA_ACK_REC = 0x18 */ + mov r10, #0x50000 /* Set r10 to 0x50000 =~ 328,000 */ + +loop_5: + subs r10, r10, #1 /* timeout count down */ + bne testStatus + mov r4, #0 /* r4 = 0 -> operation failed */ + b exit_i2cRead /* Exit if timeout (No DIMM) */ + +testStatus: + MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH)) + cmp r6, #0x18 + bne loop_5 + + + /* check if the offset is bigger than 256 byte*/ + tst r7, #0x80000000 + bne great_than_256 + + /* Write the offset to be read from the DIMM EEPROM */ + MV_REG_WRITE_ASM (r7, r1, TWSI_DATA_REG(I2C_CH)) + + b after_offset + +great_than_256: + mov r10, r7, LSR #8 + and r10, r10, #0xff + /* Write the offset0 to be read from the EEPROM */ + MV_REG_WRITE_ASM (r10, r1, TWSI_DATA_REG(I2C_CH)) + + /* Clear the interrupt flag ==> signaling that the address can now + be transmited */ + + bl _twsiDelay + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bl _twsiDelay + + /* Wait for the interrupt to be set again ==> address has transmited */ +loop_6_1: +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH)) + tst r6, #BIT2 +#else + MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG) + tst r6, #BIT5 +#endif + beq loop_6_1 + + /* Wait for status TWSI_MAS_TRAN_DATA_BYTE_ACK_REC = 0x28 */ +loop_7_1: + MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH)) + cmp r6, #0x28 + bne loop_7_1 + + + mov r10, r7 + and r10, r10, #0xff + /* Write the offset1 to be read from the EEPROM */ + MV_REG_WRITE_ASM (r10, r1, TWSI_DATA_REG(I2C_CH)) + + + +after_offset: + + /* Clear the interrupt flag ==> signaling that the address can now + be transmited */ + + bl _twsiDelay + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bl _twsiDelay + + /* Wait for the interrupt to be set again ==> address has transmited */ +loop_6: +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH)) + tst r6, #BIT2 +#else + MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG) + tst r6, #BIT5 +#endif + beq loop_6 + + /* Wait for status TWSI_MAS_TRAN_DATA_BYTE_ACK_REC = 0x28 */ +loop_7: + MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH)) + cmp r6, #0x28 + bne loop_7 + + /* Retransmit the device address with read indication to get the data */ + + /* generate a repeated start bit */ + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + orr r6, r6, #TWSI_CONTROL_START_BIT + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + + + /* Clear the interrupt flag ==> the start bit will be transmitted. */ + bl _twsiDelay + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bl _twsiDelay + + /* Wait for the interrupt flag (bit3) to be set */ +loop_9: +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH)) + tst r6, #BIT2 +#else + MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG) + tst r6, #BIT5 +#endif + beq loop_9 + + /* Wait for the start bit to be reset by HW */ +loop_8: + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + tst r6, #TWSI_CONTROL_START_BIT + bne loop_8 + + /* Wait for status TWSI_REPEATED_START_CONDITION_TRA = 0x10 */ +loop_10: + MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH)) + cmp r6, #0x10 + bne loop_10 + + /* Writing the address of (DIMM0<<1) with read indication (bit0 is 1) */ + mov r6, r4, LSL #1 + orr r6, r6, #1 /* Read operation address bit 0 must be 1 */ + MV_REG_WRITE_ASM (r6, r1, TWSI_DATA_REG(I2C_CH)) + + /* Clear the interrupt flag ==> the address will be transmitted */ + bl _twsiDelay + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bl _twsiDelay + + /* Wait for the interrupt flag (bit3) to be set as a result of + transmitting the address. */ +loop_11: +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH)) + tst r6, #BIT2 +#else + MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG) + tst r6, #BIT5 +#endif + beq loop_11 + + /* Wait for status TWSI_ADDR_PLUS_READ_BIT_TRA_ACK_REC = 0x40 */ +loop_12: + MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH)) + cmp r6, #0x40 + bne loop_12 + + /* Clear the interrupt flag and the Acknoledge bit */ + bl _twsiDelay + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bic r6, r6, #(TWSI_CONTROL_INT_FLAG_SET | TWSI_CONTROL_ACK) + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bl _twsiDelay + + /* Wait for the interrupt flag (bit3) to be set */ +loop_14: +#ifdef MV78XX0 + MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH)) + tst r6, #BIT2 +#else + MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG) + tst r6, #BIT5 +#endif + beq loop_14 + + /* Wait for status TWSI_MAS_REC_READ_DATA_ACK_NOT_TRA = 0x58 */ +loop_15: + MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH)) + cmp r6, #0x58 + bne loop_15 + + /* Store the data in r7. */ + MV_REG_READ_ASM (r7, r1, TWSI_DATA_REG(I2C_CH)) + + /* Generate stop bit */ + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + orr r6, r6, #TWSI_CONTROL_STOP_BIT + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + + + /* Clear the interrupt flag */ + bl _twsiDelay + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET + MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + bl _twsiDelay + + /* Wait for the stop bit to be reset by HW */ +loop_16: + MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH)) + tst r6, #TWSI_CONTROL_INT_FLAG_SET + bne loop_16 + +exit_i2cRead: + mov PC, r9 /* r9 is saved link register */ diff --git a/target/linux/generic/files/crypto/ocf/ocf-compat.h b/target/linux/generic/files/crypto/ocf/ocf-compat.h index b76c369dd6..4ad12232bc 100644 --- a/target/linux/generic/files/crypto/ocf/ocf-compat.h +++ b/target/linux/generic/files/crypto/ocf/ocf-compat.h @@ -287,6 +287,8 @@ static inline void *sg_virt(struct scatterlist *sg) #define sg_init_table(sg, n) +#define sg_mark_end(sg) + #endif #ifndef late_initcall @@ -359,13 +361,9 @@ static inline int ocf_run_thread(void *arg) #include #endif -#include #if LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) -static inline struct page *skb_frag_page(const skb_frag_t *frag) -{ - return frag->page; -} +#define skb_frag_page(x) ((x)->page) #endif #endif /* __KERNEL__ */ diff --git a/target/linux/generic/files/crypto/ocf/safe/safe.c b/target/linux/generic/files/crypto/ocf/safe/safe.c index 7d9b541177..141640e44b 100644 --- a/target/linux/generic/files/crypto/ocf/safe/safe.c +++ b/target/linux/generic/files/crypto/ocf/safe/safe.c @@ -1944,12 +1944,10 @@ static int safe_probe(struct pci_dev *dev, const struct pci_device_id *ent) return(-ENODEV); } -#ifdef HAVE_PCI_SET_MWI if (pci_set_mwi(dev)) { printk("safe: pci_set_mwi failed!"); return(-ENODEV); } -#endif sc = (struct safe_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); if (!sc) diff --git a/target/linux/generic/patches-3.3/941-ocf_20110720.patch b/target/linux/generic/patches-3.3/941-ocf_20110720.patch deleted file mode 100644 index 5ff399ef62..0000000000 --- a/target/linux/generic/patches-3.3/941-ocf_20110720.patch +++ /dev/null @@ -1,133 +0,0 @@ ---- a/kernel/pid.c -+++ b/kernel/pid.c -@@ -430,6 +430,7 @@ struct task_struct *find_task_by_vpid(pi - { - return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns); - } -+EXPORT_SYMBOL(find_task_by_vpid); - - struct pid *get_task_pid(struct task_struct *task, enum pid_type type) - { ---- a/drivers/char/random.c -+++ b/drivers/char/random.c -@@ -130,6 +130,9 @@ - * void add_interrupt_randomness(int irq); - * void add_disk_randomness(struct gendisk *disk); - * -+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count) -+ * int random_input_wait(void); -+ * - * add_input_randomness() uses the input layer interrupt timing, as well as - * the event type information from the hardware. - * -@@ -147,6 +150,13 @@ - * seek times do not make for good sources of entropy, as their seek - * times are usually fairly consistent. - * -+ * random_input_words() just provides a raw block of entropy to the input -+ * pool, such as from a hardware entropy generator. -+ * -+ * random_input_wait() suspends the caller until such time as the -+ * entropy pool falls below the write threshold, and returns a count of how -+ * much entropy (in bits) is needed to sustain the pool. -+ * - * All of these routines try to estimate how many bits of randomness a - * particular randomness source. They do this by keeping track of the - * first and second order deltas of the event timings. -@@ -726,6 +736,63 @@ void add_disk_randomness(struct gendisk - } - #endif - -+/* -+ * random_input_words - add bulk entropy to pool -+ * -+ * @buf: buffer to add -+ * @wordcount: number of __u32 words to add -+ * @ent_count: total amount of entropy (in bits) to credit -+ * -+ * this provides bulk input of entropy to the input pool -+ * -+ */ -+void random_input_words(__u32 *buf, size_t wordcount, int ent_count) -+{ -+ mix_pool_bytes(&input_pool, buf, wordcount*4); -+ -+ credit_entropy_bits(&input_pool, ent_count); -+ -+ DEBUG_ENT("crediting %d bits => %d\n", -+ ent_count, input_pool.entropy_count); -+ /* -+ * Wake up waiting processes if we have enough -+ * entropy. -+ */ -+ if (input_pool.entropy_count >= random_read_wakeup_thresh) -+ wake_up_interruptible(&random_read_wait); -+} -+EXPORT_SYMBOL(random_input_words); -+ -+/* -+ * random_input_wait - wait until random needs entropy -+ * -+ * this function sleeps until the /dev/random subsystem actually -+ * needs more entropy, and then return the amount of entropy -+ * that it would be nice to have added to the system. -+ */ -+int random_input_wait(void) -+{ -+ int count; -+ -+ wait_event_interruptible(random_write_wait, -+ input_pool.entropy_count < random_write_wakeup_thresh); -+ -+ count = random_write_wakeup_thresh - input_pool.entropy_count; -+ -+ /* likely we got woken up due to a signal */ -+ if (count <= 0) count = random_read_wakeup_thresh; -+ -+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n", -+ count, -+ input_pool.entropy_count, random_write_wakeup_thresh); -+ -+ return count; -+} -+EXPORT_SYMBOL(random_input_wait); -+ -+ -+#define EXTRACT_SIZE 10 -+ - /********************************************************************* - * - * Entropy extraction routines ---- a/fs/fcntl.c -+++ b/fs/fcntl.c -@@ -142,6 +142,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde - } - return ret; - } -+EXPORT_SYMBOL(sys_dup); - - #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME) - ---- a/include/linux/miscdevice.h -+++ b/include/linux/miscdevice.h -@@ -19,6 +19,7 @@ - #define APOLLO_MOUSE_MINOR 7 - #define PC110PAD_MINOR 9 - /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */ -+#define CRYPTODEV_MINOR 70 /* /dev/crypto */ - #define WATCHDOG_MINOR 130 /* Watchdog timer */ - #define TEMP_MINOR 131 /* Temperature Sensor */ - #define RTC_MINOR 135 ---- a/include/linux/random.h -+++ b/include/linux/random.h -@@ -54,6 +54,10 @@ extern void add_input_randomness(unsigne - unsigned int value); - extern void add_interrupt_randomness(int irq); - -+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count); -+extern int random_input_wait(void); -+#define HAS_RANDOM_INPUT_WAIT 1 -+ - extern void get_random_bytes(void *buf, int nbytes); - void generate_random_uuid(unsigned char uuid_out[16]); - diff --git a/target/linux/generic/patches-3.3/941-ocf_20120127.patch b/target/linux/generic/patches-3.3/941-ocf_20120127.patch new file mode 100644 index 0000000000..366a2586d4 --- /dev/null +++ b/target/linux/generic/patches-3.3/941-ocf_20120127.patch @@ -0,0 +1,164 @@ +--- a/drivers/char/random.c ++++ b/drivers/char/random.c +@@ -130,6 +130,9 @@ + * void add_interrupt_randomness(int irq); + * void add_disk_randomness(struct gendisk *disk); + * ++ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count) ++ * int random_input_wait(void); ++ * + * add_input_randomness() uses the input layer interrupt timing, as well as + * the event type information from the hardware. + * +@@ -147,6 +150,13 @@ + * seek times do not make for good sources of entropy, as their seek + * times are usually fairly consistent. + * ++ * random_input_words() just provides a raw block of entropy to the input ++ * pool, such as from a hardware entropy generator. ++ * ++ * random_input_wait() suspends the caller until such time as the ++ * entropy pool falls below the write threshold, and returns a count of how ++ * much entropy (in bits) is needed to sustain the pool. ++ * + * All of these routines try to estimate how many bits of randomness a + * particular randomness source. They do this by keeping track of the + * first and second order deltas of the event timings. +@@ -726,6 +736,63 @@ void add_disk_randomness(struct gendisk + } + #endif + ++/* ++ * random_input_words - add bulk entropy to pool ++ * ++ * @buf: buffer to add ++ * @wordcount: number of __u32 words to add ++ * @ent_count: total amount of entropy (in bits) to credit ++ * ++ * this provides bulk input of entropy to the input pool ++ * ++ */ ++void random_input_words(__u32 *buf, size_t wordcount, int ent_count) ++{ ++ mix_pool_bytes(&input_pool, buf, wordcount*4); ++ ++ credit_entropy_bits(&input_pool, ent_count); ++ ++ DEBUG_ENT("crediting %d bits => %d\n", ++ ent_count, input_pool.entropy_count); ++ /* ++ * Wake up waiting processes if we have enough ++ * entropy. ++ */ ++ if (input_pool.entropy_count >= random_read_wakeup_thresh) ++ wake_up_interruptible(&random_read_wait); ++} ++EXPORT_SYMBOL(random_input_words); ++ ++/* ++ * random_input_wait - wait until random needs entropy ++ * ++ * this function sleeps until the /dev/random subsystem actually ++ * needs more entropy, and then return the amount of entropy ++ * that it would be nice to have added to the system. ++ */ ++int random_input_wait(void) ++{ ++ int count; ++ ++ wait_event_interruptible(random_write_wait, ++ input_pool.entropy_count < random_write_wakeup_thresh); ++ ++ count = random_write_wakeup_thresh - input_pool.entropy_count; ++ ++ /* likely we got woken up due to a signal */ ++ if (count <= 0) count = random_read_wakeup_thresh; ++ ++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n", ++ count, ++ input_pool.entropy_count, random_write_wakeup_thresh); ++ ++ return count; ++} ++EXPORT_SYMBOL(random_input_wait); ++ ++ ++#define EXTRACT_SIZE 10 ++ + /********************************************************************* + * + * Entropy extraction routines +--- a/fs/fcntl.c ++++ b/fs/fcntl.c +@@ -142,6 +142,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde + } + return ret; + } ++EXPORT_SYMBOL(sys_dup); + + #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME) + +--- a/include/linux/miscdevice.h ++++ b/include/linux/miscdevice.h +@@ -19,6 +19,7 @@ + #define APOLLO_MOUSE_MINOR 7 + #define PC110PAD_MINOR 9 + /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */ ++#define CRYPTODEV_MINOR 70 /* /dev/crypto */ + #define WATCHDOG_MINOR 130 /* Watchdog timer */ + #define TEMP_MINOR 131 /* Temperature Sensor */ + #define RTC_MINOR 135 +--- a/include/linux/random.h ++++ b/include/linux/random.h +@@ -34,6 +34,30 @@ + /* Clear the entropy pool and associated counters. (Superuser only.) */ + #define RNDCLEARPOOL _IO( 'R', 0x06 ) + ++#ifdef CONFIG_FIPS_RNG ++ ++/* Size of seed value - equal to AES blocksize */ ++#define AES_BLOCK_SIZE_BYTES 16 ++#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES ++/* Size of AES key */ ++#define KEY_SIZE_BYTES 16 ++ ++/* ioctl() structure used by FIPS 140-2 Tests */ ++struct rand_fips_test { ++ unsigned char key[KEY_SIZE_BYTES]; /* Input */ ++ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */ ++ unsigned char seed[SEED_SIZE_BYTES]; /* Input */ ++ unsigned char result[SEED_SIZE_BYTES]; /* Output */ ++}; ++ ++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */ ++#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test) ++ ++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */ ++#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test) ++ ++#endif /* #ifdef CONFIG_FIPS_RNG */ ++ + struct rand_pool_info { + int entropy_count; + int buf_size; +@@ -54,6 +78,10 @@ extern void add_input_randomness(unsigne + unsigned int value); + extern void add_interrupt_randomness(int irq); + ++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count); ++extern int random_input_wait(void); ++#define HAS_RANDOM_INPUT_WAIT 1 ++ + extern void get_random_bytes(void *buf, int nbytes); + void generate_random_uuid(unsigned char uuid_out[16]); + +--- a/kernel/pid.c ++++ b/kernel/pid.c +@@ -430,6 +430,7 @@ struct task_struct *find_task_by_vpid(pi + { + return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns); + } ++EXPORT_SYMBOL(find_task_by_vpid); + + struct pid *get_task_pid(struct task_struct *task, enum pid_type type) + {