From: Andrew Pikler Date: Mon, 5 Oct 2020 14:16:44 +0000 (+0300) Subject: ramips: add support for D-Link DIR-882 R1 X-Git-Tag: v21.02.0-rc1~739 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=28262f815e4d0fe5302babc696ed5ce518b33759;p=openwrt%2Fstaging%2Fhauke.git ramips: add support for D-Link DIR-882 R1 Specifications: - SoC: MediaTek MT7621AT - RAM: 128 MB (DDR3) - Flash: 16 MB (SPI NOR) - WiFi: MediaTek MT7615N (x2) - Switch: 1 WAN, 4 LAN (Gigabit) - Ports: 1 USB 2.0, 1 USB 3.0 - Buttons: Reset, WiFi Toggle, WPS - LEDs: Power, Internet, WiFi 2.4G WiFi 5G, USB 2.0, USB 3.0 The R1 revision is identical to the A1 revision except - No Config2 Parition, therefore - factory partition resized to 64k from 128K - Firmware partition offset is 0x50000 not 0x60000 - Firmware partitions size increased by 64K - Firmware partition type is "denx,uimage", not "sge,uimage" - Padding of image creation "uimage-padhdr 96" removed Installation: - Older firmware versions: put the factory image on a USB stick, turn on the telnet console, and flash using the following cmd "fw_updater Linux /mnt/usb_X_X/firmware.bin" - D-Link FailsafeUI: Power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the internet LED stops flashing, then jack into any lan port and manually assign a static IP address in 192.168.0.0/24 other than 192.168.0.0 (e.g. 192.168.0.2) and go to http://192.168.0.1 Flash with the factory image. Signed-off-by: Andrew Pikler --- diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts index bc2c6dfe86..cef0705393 100644 --- a/target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts +++ b/target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts @@ -1,24 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621_dlink_dir-8xx-a1.dtsi" +#include "mt7621_dlink_dir-882-x1.dtsi" / { compatible = "dlink,dir-882-a1", "mediatek,mt7621-soc"; model = "D-Link DIR-882 A1"; }; - -&leds { - usb2 { - label = "green:usb2"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - trigger-sources = <&ehci_port2>; - linux,default-trigger = "usbport"; - }; - - usb3 { - label = "green:usb3"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - trigger-sources = <&xhci_ehci_port1>; - linux,default-trigger = "usbport"; - }; -}; diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-882-r1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-882-r1.dts new file mode 100644 index 0000000000..26b6f34707 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dir-882-r1.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_dlink_dir-8xx-r1.dtsi" +#include "mt7621_dlink_dir-882-x1.dtsi" + +/ { + compatible = "dlink,dir-882-r1", "mediatek,mt7621-soc"; + model = "D-Link DIR-882 R1"; +}; diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-882-x1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-882-x1.dtsi new file mode 100644 index 0000000000..cafb1df964 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dir-882-x1.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +&leds { + usb2 { + label = "green:usb2"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3 { + label = "green:usb3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_ehci_port1>; + linux,default-trigger = "usbport"; + }; +}; diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi index e451d6a39f..c43cc49aa1 100644 --- a/target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi +++ b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi @@ -1,65 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "mt7621.dtsi" - -#include -#include - -/ { - aliases { - label-mac-device = &gmac0; - led-boot = &led_power_orange; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_net_orange; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wifi { - label = "wifi"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds: leds { - compatible = "gpio-leds"; - - led_power_orange: power_orange { - label = "orange:power"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - - led_power_green: power_green { - label = "green:power"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - - led_net_orange: net_orange { - label = "orange:net"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - - net_green { - label = "green:net"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - }; -}; +#include "mt7621_dlink_dir-8xx-x1.dtsi" &spi0 { status = "okay"; @@ -100,74 +41,3 @@ }; }; }; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x0000>; - ieee80211-freq-limit = <2400000 2500000>; - - led { - led-active-low; - }; - }; -}; - -&pcie1 { - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - - led { - led-active-low; - }; - }; -}; - -&gmac0 { - mtd-mac-address = <&factory 0xe000>; -}; - -&switch0 { - ports { - port@0 { - status = "okay"; - label = "lan4"; - }; - - port@1 { - status = "okay"; - label = "lan3"; - }; - - port@2 { - status = "okay"; - label = "lan2"; - }; - - port@3 { - status = "okay"; - label = "lan1"; - }; - - port@4 { - status = "okay"; - label = "wan"; - mtd-mac-address = <&factory 0xe006>; - }; - }; -}; - -&state_default { - gpio { - groups = "i2c", "uart3", "jtag", "wdt"; - function = "gpio"; - }; -}; diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-8xx-r1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-r1.dtsi new file mode 100644 index 0000000000..e93a06d9fe --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-r1.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_dlink_dir-8xx-x1.dtsi" + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-8xx-x1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-x1.dtsi new file mode 100644 index 0000000000..7ab0e8bd5d --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-x1.dtsi @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + aliases { + label-mac-device = &gmac0; + led-boot = &led_power_orange; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_net_orange; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led_power_orange: power_orange { + label = "orange:power"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + led_power_green: power_green { + label = "green:power"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + led_net_orange: net_orange { + label = "orange:net"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + net_green { + label = "green:net"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + + led { + led-active-low; + }; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-active-low; + }; + }; +}; + +&gmac0 { + mtd-mac-address = <&factory 0xe000>; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan4"; + }; + + port@1 { + status = "okay"; + label = "lan3"; + }; + + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan1"; + }; + + port@4 { + status = "okay"; + label = "wan"; + mtd-mac-address = <&factory 0xe006>; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index cc0eb1d279..cf81a862ff 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -235,6 +235,17 @@ define Device/dlink_dir-8xx-a1 check-size endef +define Device/dlink_dir-8xx-r1 + $(Device/dsa-migration) + IMAGE_SIZE := 16064k + DEVICE_VENDOR := D-Link + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware + KERNEL_INITRAMFS := $$(KERNEL) + IMAGES += factory.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs |\ + pad-rootfs | append-metadata | check-size +endef + define Device/dlink_dir-xx60-a1 $(Device/dsa-migration) BLOCKSIZE := 128k @@ -312,6 +323,17 @@ define Device/dlink_dir-882-a1 endef TARGET_DEVICES += dlink_dir-882-a1 +define Device/dlink_dir-882-r1 + $(Device/dlink_dir-8xx-r1) + DEVICE_MODEL := DIR-882 + DEVICE_VARIANT := R1 + DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport + IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \ + sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \ + ab0dff19af8842cdb70a86b4b68d23f7 +endef +TARGET_DEVICES += dlink_dir-882-r1 + define Device/d-team_newifi-d2 $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index cd1814cc2b..8d91b36346 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -30,7 +30,8 @@ dlink,dir-2660-a1) dlink,dir-860l-b1|\ dlink,dir-867-a1|\ dlink,dir-878-a1|\ -dlink,dir-882-a1) +dlink,dir-882-a1|\ +dlink,dir-882-r1) ucidef_set_led_netdev "wan" "wan" "green:net" "wan" ;; gnubee,gb-pc1|\