From: Heiko Stübner <heiko@sntech.de>
Date: Sat, 23 Feb 2013 20:06:44 +0000 (-0800)
Subject: Input: auo-pixcir-ts - handle reset gpio directly
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=27cef8b47cfb27fa2955a8577637794f1f275db2;p=openwrt%2Fstaging%2Fblogic.git

Input: auo-pixcir-ts - handle reset gpio directly

Devicetree based platforms don't handle device callbacks very well
and until now no board has come along that needs more extended hwinit
than pulling the rst gpio high.

Therefore pull the reset handling directly into the driver and remove
the callbacks from the driver.

If extended device setup is needed at some later point, power-sequences
would probably be the solution of choice.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c
index 813413eebab7..6317a9c7884c 100644
--- a/drivers/input/touchscreen/auo-pixcir-ts.c
+++ b/drivers/input/touchscreen/auo-pixcir-ts.c
@@ -511,8 +511,21 @@ static int auo_pixcir_probe(struct i2c_client *client,
 		goto err_gpio_dir;
 	}
 
-	if (pdata->init_hw)
-		pdata->init_hw(client);
+	ret = gpio_request(pdata->gpio_rst, "auo_pixcir_ts_rst");
+	if (ret) {
+		dev_err(&client->dev, "request of gpio %d failed, %d\n",
+			pdata->gpio_rst, ret);
+		goto err_gpio_dir;
+	}
+
+	ret = gpio_direction_output(pdata->gpio_rst, 1);
+	if (ret) {
+		dev_err(&client->dev, "setting direction of gpio %d failed %d\n",
+			pdata->gpio_rst, ret);
+		goto err_gpio_rst;
+	}
+
+	msleep(200);
 
 	ts->client = client;
 	ts->touch_ind_mode = 0;
@@ -597,8 +610,9 @@ err_input_register:
 err_fw_vers:
 	input_free_device(input_dev);
 err_input_alloc:
-	if (pdata->exit_hw)
-		pdata->exit_hw(client);
+	gpio_set_value(pdata->gpio_rst, 0);
+err_gpio_rst:
+	gpio_free(pdata->gpio_rst);
 err_gpio_dir:
 	gpio_free(pdata->gpio_int);
 err_gpio_int:
@@ -616,8 +630,8 @@ static int auo_pixcir_remove(struct i2c_client *client)
 
 	input_unregister_device(ts->input);
 
-	if (pdata->exit_hw)
-		pdata->exit_hw(client);
+	gpio_set_value(pdata->gpio_rst, 0);
+	gpio_free(pdata->gpio_rst);
 
 	gpio_free(pdata->gpio_int);
 
diff --git a/include/linux/input/auo-pixcir-ts.h b/include/linux/input/auo-pixcir-ts.h
index 75d4be717714..5049f21928e4 100644
--- a/include/linux/input/auo-pixcir-ts.h
+++ b/include/linux/input/auo-pixcir-ts.h
@@ -43,12 +43,10 @@
  */
 struct auo_pixcir_ts_platdata {
 	int gpio_int;
+	int gpio_rst;
 
 	int int_setting;
 
-	void (*init_hw)(struct i2c_client *);
-	void (*exit_hw)(struct i2c_client *);
-
 	unsigned int x_max;
 	unsigned int y_max;
 };