From: Christian Riesch Date: Thu, 2 Feb 2012 00:44:37 +0000 (+0000) Subject: arm, arm926ejs: Do cpu critical inits only for boards that require it X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=27b66622b51f350ce6c143f82d104860ee887f5c;p=project%2Fbcm63xx%2Fu-boot.git arm, arm926ejs: Do cpu critical inits only for boards that require it This patch reverts commit ca4b55800ed74207c35271bf7335a092d4955416 "arm, arm926ejs: always do cpu critical inits" since it impacts all arm926ejs based configurations and caused problems, e.g., with the hawkboard. Instead the patch removes the CONFIG_SKIP_LOWLEVEL_INIT defines from the board configurations that need low level initialization. Signed-off-by: Christian Riesch Cc: Albert Aribaud Cc: Tom Rini Cc: Heiko Schocher Acked-by: Heiko Schocher Tested-by: Heiko Schocher --- diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 6a09c028e4..bb4d00bf3f 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -194,7 +194,9 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit +#endif /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: @@ -353,6 +355,7 @@ _dynsym_start_ofs: * ************************************************************************* */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT cpu_init_crit: /* * flush v4 I/D caches @@ -371,15 +374,14 @@ cpu_init_crit: orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ mcr p15, 0, r0, c1, c0, 0 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* * Go setup Memory and board specific bits prior to relocation. */ mov ip, lr /* perserve link reg across call */ bl lowlevel_init /* go setup pll,mux,memory */ mov lr, ip /* restore link */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ mov pc, lr /* back to my caller */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ #ifndef CONFIG_SPL_BUILD /* diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 79a8611f82..0fee53f750 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -275,12 +275,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000 -/* - * U-Boot is a 3rd stage loader and if booting with spl, cpu setup is - * done in board_init_f from c code. - */ -#define CONFIG_SKIP_LOWLEVEL_INIT - /* for UBL header */ #define CONFIG_SYS_UBL_BLOCK (CONFIG_SYS_NAND_PAGE_SIZE) diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index f32bd34add..51a5a09a72 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 -#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 /* diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 9fd6a4f183..98421795b4 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 -#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_DA850_LOWLEVEL #define CONFIG_ARCH_CPU_INIT #define CONFIG_DA8XX_GPIO