From: Robert Marko Date: Sat, 19 Feb 2022 12:48:36 +0000 (+0100) Subject: ipq40xx: drop ESSEDMA + AR40xx DTS nodes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=27b441cbaf426edffa6b90b06bb356528203b33a;p=openwrt%2Fstaging%2Fnbd.git ipq40xx: drop ESSEDMA + AR40xx DTS nodes In order to start working on IPQESS + DSA drop the old ESSEDMA + AR40xx DTS nodes. Signed-off-by: Robert Marko --- diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts index f571da510e..2236edf80b 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -21,10 +21,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -62,14 +58,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -174,22 +162,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - &usb2_hs_phy { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts index b2d8aa4999..def355b465 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -65,10 +65,6 @@ pinctrl-names = "default"; }; - ess-psgmii@98000 { - status = "okay"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -118,17 +114,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; }; }; @@ -277,22 +262,6 @@ #gpio-cells = <2>; }; -&gmac0 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - vlan_tag = <1 0x10>; -}; - -&gmac1 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - vlan_tag = <2 0x20>; -}; - &tlmm { i2c0_pins: i2c0_pinmux { mux_i2c { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts index b18ba4d46a..515d71b456 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts @@ -61,16 +61,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,poll_required = <0>; - qcom,num_gmac = <1>; - }; }; keys { @@ -222,10 +212,6 @@ status = "okay"; }; -&gmac0 { - vlan_tag = <0 0x3f>; -}; - ðphy3 { gpio-controller; #gpio-cells = <2>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts index 52311755b7..dea5c2dc36 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts @@ -29,10 +29,6 @@ reset-delay-us = <5000>; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -64,14 +60,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; leds { @@ -264,13 +252,3 @@ nvmem-cell-names = "pre-calibration"; nvmem-cells = <&precal_art_5000>; }; - -&gmac0 { - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_art_6>; -}; - -&gmac1 { - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_art_0>; -}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts index e3afddb376..ff8053c42b 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts @@ -17,11 +17,6 @@ }; soc { - edma@c080000 { - qcom,num_gmac = <1>; - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -51,16 +46,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x20>; - switch_wan_bmp = <0x00>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; }; leds { @@ -192,14 +177,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -}; - &mdio { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts index a99aa90b61..0fd9654111 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts @@ -25,10 +25,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -68,14 +64,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts index 6a7f4e5b0f..a8f24aa00e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts @@ -18,10 +18,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -47,14 +43,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -227,14 +215,6 @@ status = "okay"; }; -&gmac0 { - vlan_tag = <2 0x20>; -}; - -&gmac1 { - vlan_tag = <1 0x10>; -}; - &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts index 6f4d7b5f32..df2ef37f17 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts @@ -14,7 +14,6 @@ led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; - label-mac-device = &gmac0; }; chosen { @@ -57,10 +56,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -110,17 +105,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; }; }; @@ -303,18 +287,6 @@ pinctrl-names = "default"; }; -&gmac0 { - qcom,poll_required = <1>; - qcom,phy_mdio_addr = <4>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,poll_required = <1>; - qcom,phy_mdio_addr = <3>; - vlan_tag = <1 0x10>; -}; - &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts index b405867134..396595ba51 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts @@ -25,10 +25,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -54,17 +50,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x20>; - switch_wan_bmp = <0x00>; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; }; keys { @@ -210,14 +195,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -}; - &cryptobam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts index 848e5c2363..3616149451 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts @@ -18,10 +18,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -51,14 +47,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -212,14 +200,6 @@ status = "okay"; }; -&gmac0 { - vlan_tag = <1 0x10>; -}; - -&gmac1 { - vlan_tag = <2 0x20>; -}; - &usb2_hs_phy { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts index b765d68b51..69275e24b8 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts @@ -26,14 +26,6 @@ status = "okay"; }; - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -60,14 +52,6 @@ status = "okay"; }; - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - /* * Disable the broken restart as a workaround for the buggy * 3.0.0/3.0.1 U-boots that ship with the device. diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi index eb97130c27..ddb2c9bd03 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi @@ -33,10 +33,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -62,15 +58,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; }; aliases { @@ -78,7 +65,6 @@ led-failsafe = &power_amber; led-running = &power_green; led-upgrade = &power_amber; - label-mac-device = &gmac0; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts index 77b1810f09..d962ca58fa 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts @@ -14,7 +14,6 @@ led-failsafe = &flash; led-running = &power; led-upgrade = &flash; - label-mac-device = &gmac0; }; soc { @@ -26,10 +25,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -69,14 +64,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts index b96f014dd2..41ed66e595 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts @@ -35,10 +35,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -80,16 +76,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x18>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts index b5818cef39..ee174a29d1 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts @@ -78,14 +78,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi index da09e53cc3..ee94a15c00 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi @@ -19,10 +19,6 @@ pinctrl-names = "default"; }; - ess-psgmii@98000 { - status = "okay"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -69,16 +65,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; /* lan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - }; }; }; @@ -241,20 +227,6 @@ status = "okay"; }; -&gmac0 { - qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; - qcom,phy_mdio_addr = <3>; - vlan_tag = <1 0x10>; -}; - -&gmac1 { - qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; - qcom,phy_mdio_addr = <4>; - vlan_tag = <2 0x20>; -}; - &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts index 2709aef502..f1bd88f942 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts @@ -29,10 +29,6 @@ /delete-node/ ethernet-phy@1; }; - ess-psgmii@98000 { - status = "okay"; - }; - crypto@8e3a000 { status = "okay"; }; @@ -41,42 +37,6 @@ status = "okay"; }; - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x3e>; - switch_wan_bmp = <0x0>; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <3>; - - gmac0 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - /delete-property/ qcom,forced_speed; - /delete-property/ qcom,forced_duplex; - vlan_tag = <1 0x10>; - }; - - gmac1 { - qcom,phy_mdio_addr = <2>; - qcom,poll_required = <1>; - /delete-property/ qcom,forced_speed; - /delete-property/ qcom,forced_duplex; - vlan_tag = <1 0x08>; - }; - - gmac2 { - local-mac-address = [00 00 00 00 00 00]; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - /delete-property/ qcom,forced_speed; - /delete-property/ qcom,forced_duplex; - vlan_tag = <1 0x20>; - }; - }; - gpio_export { compatible = "gpio-export"; #size-cells = <0>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts index caafc1beb4..4922938692 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts @@ -35,10 +35,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -103,14 +99,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts index bcb9552ce7..4e08dd39d0 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts @@ -21,10 +21,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -62,14 +58,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -166,22 +154,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - &usb2_hs_phy { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts index ac4d4a139c..1d860627b5 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts @@ -30,10 +30,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -84,14 +80,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi index 3673a13430..230b62a94e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi @@ -6,10 +6,6 @@ #include / { - aliases { - label-mac-device = &gmac0; - }; - memory { device_type = "memory"; reg = <0x80000000 0x10000000>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts index 87bceecbba..9c95ccc141 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts @@ -65,17 +65,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-psgmii@98000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - phy-mode = "rgmii"; - qcom,num_gmac = <1>; - qcom,single-phy; - }; }; keys { @@ -228,14 +217,6 @@ qcom,ath10k-calibration-variant = "MikroTik-SXTsq-5-ac"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -}; - &mdio { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts index d6c0ff0938..aa54f43e85 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts @@ -16,7 +16,6 @@ led-failsafe = &led_power_amber; led-running = &led_power_green; led-upgrade = &led_power_amber; - label-mac-device = &gmac0; }; chosen { @@ -28,10 +27,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -62,14 +57,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -358,14 +345,6 @@ reset-delay-us = <2000>; }; -&gmac0 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - vlan_tag = <1 0x10>; -}; - &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration", "mac-address"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts index a77b85aa54..e6a6202216 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts @@ -49,14 +49,6 @@ reg = <0x1957000 0x100>; qcom,wifi_noc_memtype_m0_m2 = ; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -195,19 +187,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - vlan_tag = <1 0x10>; -}; - &wifi0 { status = "okay"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts index be2f619b39..317fe26e2e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts @@ -11,7 +11,6 @@ compatible = "pakedge,wr-1"; aliases { - label-mac-device = &gmac0; led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; @@ -60,10 +59,6 @@ }; soc { - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -87,14 +82,6 @@ reg = <0x1957000 0x100>; qcom,wifi_noc_memtype_m0_m2 = ; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts index 8fa5a31908..efb267ae36 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts @@ -44,10 +44,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -73,15 +69,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; }; leds { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts index 2af4296342..ed9996f097 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts @@ -53,10 +53,6 @@ /delete-node/ ethernet-phy@3; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -96,17 +92,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x1e>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; }; }; @@ -232,20 +217,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <2>; - qcom,poll_required = <1>; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_art_6>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_art_0>; -}; - &tlmm { serial0_pins: serial0_pinmux { mux { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts index 279050fa15..799e3cb415 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts @@ -21,10 +21,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -62,17 +58,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -184,14 +169,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - &usb2_hs_phy { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts index ba6aabdc9c..036bace182 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts @@ -29,10 +29,6 @@ reset-delay-us = <1000>; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -97,14 +93,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; led_spi { @@ -196,16 +184,6 @@ status = "okay"; }; -&gmac0 { - nvmem-cells = <&macaddr_art_1006>; - nvmem-cell-names = "mac-address"; -}; - -&gmac1 { - nvmem-cells = <&macaddr_art_5006>; - nvmem-cell-names = "mac-address"; -}; - &nand { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi index 5bfb758e50..9689bc566f 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi @@ -30,10 +30,6 @@ pinctrl-names = "default"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -120,14 +116,6 @@ status = "okay"; }; - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - leds { compatible = "gpio-leds"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts index c8112c04fe..dc144a1584 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts @@ -76,10 +76,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - crypto@8e3a000 { status = "okay"; }; @@ -87,15 +83,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x10>; - }; - - edma@c080000 { - status = "okay"; - }; }; }; @@ -189,10 +176,6 @@ status = "okay"; }; -&gmac0 { - vlan_tag = <1 0x10>; -}; - &nand { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts index 27c7d071dc..af79020121 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts @@ -25,10 +25,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -64,15 +60,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts index 2d20d5928a..459f4a3384 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts @@ -59,19 +59,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - phy-mode = "rgmii-id"; - qcom,num_gmac = <1>; - qcom,single-phy; - }; }; key { @@ -265,9 +252,3 @@ status = "okay"; qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; }; - -&gmac0 { - qcom,phy_mdio_addr = <0>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts index 2e4bfd69ba..babf07727a 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts @@ -25,10 +25,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -54,18 +50,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x30>; - switch_wan_bmp = <0x02>; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; }; key { @@ -210,10 +194,6 @@ }; }; -&gmac0 { - vlan_tag = <1 0x30>; -}; - &cryptobam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts index 9d7259c354..6fdc361ee7 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts @@ -27,10 +27,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -60,16 +56,6 @@ crypto@8e3a000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x2e>; - switch_wan_bmp = <0x10>; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -113,18 +99,6 @@ }; }; -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x10>; -}; - -&gmac0 { - vlan_tag = <1 0x2e>; -}; - &vqmmc { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts index 2a2cfb9ac2..c467d85049 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts @@ -29,10 +29,6 @@ pinctrl-names = "default"; }; - ess-psgmii@98000 { - status = "okay"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -79,14 +75,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts index c8b7e202fd..c03762eac1 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts @@ -73,14 +73,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts index aecbb673bf..a91a7fae17 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts @@ -85,19 +85,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - phy-mode = "rgmii-id"; - qcom,num_gmac = <1>; - qcom,single-phy; - }; }; keys { @@ -260,9 +247,3 @@ }; }; }; - -&gmac0 { - qcom,phy_mdio_addr = <0>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts index 433048dd4b..94e94beb81 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts @@ -26,10 +26,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -59,14 +55,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts index 8d1505cfe9..d2a010055c 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts @@ -130,14 +130,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; }; @@ -225,17 +217,6 @@ status = "okay"; }; -&gmac0 { - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_config_0>; -}; - -&gmac1 { - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_config_0>; - mac-address-increment = <1>; -}; - &nand { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts index bdcc31fef7..beb168eb49 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts @@ -27,10 +27,6 @@ pinctrl-names = "default"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -97,17 +93,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_mac_mode = <0x0>; /* mac mode for RGMII RMII */ - switch_initvlas = <0x0007c 0x54>; /* port0 status */ - switch_lan_bmp = <0x10>; - }; - - edma@c080000 { - status = "okay"; - }; }; key { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi index bdbee7f837..4a575b60ee 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi @@ -25,10 +25,6 @@ pinctrl-names = "default"; }; - ess-psgmii@98000 { - status = "okay"; - }; - counter@4a1000 { compatible = "qcom,qca-gcnt"; reg = <0x4a1000 0x4>; @@ -67,17 +63,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x1c>; - switch_wan_bmp = <0x02>; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -281,15 +266,6 @@ status = "okay"; }; -&gmac0 { - vlan_tag = <1 0x1c>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <0>; - vlan_tag = <2 0x02>; -}; - &pcie0 { status = "okay"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts index 2d0655114b..461f05bc73 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts @@ -21,10 +21,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -50,17 +46,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -169,14 +154,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - &pcie0 { status = "okay"; perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi index 87e0d103b7..f66c9c86ea 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi @@ -16,7 +16,6 @@ led-failsafe = &led_sys; led-running = &led_sys; led-upgrade = &led_sys; - label-mac-device = &gmac0; }; soc { @@ -30,10 +29,6 @@ pinctrl-names = "default"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -73,14 +68,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; leds { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts index 0caa0255d0..8db7226ce1 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts @@ -142,10 +142,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -187,14 +183,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi index ece80571bd..c7439b87ec 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi @@ -21,10 +21,6 @@ reset-delay-us = <2000>; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -87,14 +83,6 @@ status = "okay"; }; - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - aliases { led-boot = &led_status; led-failsafe = &led_status; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts index 9448e5145e..643449f8e4 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts @@ -25,20 +25,6 @@ device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512MB */ }; - - soc { - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - }; }; &tlmm { @@ -339,20 +325,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - &mdio { status = "okay"; pinctrl-0 = <&mdio_pins>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts index 4a4c18322f..ca37884db2 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts @@ -253,10 +253,6 @@ reset-delay-us = <5000>; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -333,16 +329,6 @@ status = "okay"; }; - ess-switch@c000000 { - switch_lan_bmp = <0x1e>; - switch_wan_bmp = <0x20>; - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - qpic_bam: dma@7984000 { status = "okay"; }; @@ -371,22 +357,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts index 1f8c830d90..f1d58ccba9 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts @@ -32,7 +32,6 @@ led-failsafe = &led_power_orange; led-running = &led_power_white; led-upgrade = &led_power_blue; - label-mac-device = &gmac0; }; soc { @@ -73,19 +72,6 @@ status = "okay"; }; - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x1c>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - usb3@8af8800 { status = "okay"; }; @@ -438,16 +424,6 @@ reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; }; -&gmac0 { - nvmem-cells = <&macaddr_orgdata_20>; - nvmem-cell-names = "mac-address"; -}; - -&gmac1 { - nvmem-cells = <&macaddr_orgdata_20>; - nvmem-cell-names = "mac-address"; -}; - &usb3_ss_phy { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts index 95a0ded6d9..681300c502 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts @@ -87,17 +87,3 @@ }; }; }; - -&gmac0 { - status = "okay"; - - mtd-mac-address = <&art 0x5006>; - mtd-mac-address-increment = <2>; -}; - -&gmac1 { - status = "okay"; - - mtd-mac-address = <&art 0x5006>; - mtd-mac-address-increment = <3>; -}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi index 4edd88cde0..742bd5b570 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi @@ -30,10 +30,6 @@ reset-delay-us = <2000>; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -96,14 +92,6 @@ status = "okay"; }; - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - leds { compatible = "gpio-leds"; pinctrl-0 = <&led_pins>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi index 8f971e505c..8c9d1c7f03 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi @@ -35,10 +35,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -103,14 +99,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts index 3892c9bd81..b6ce8c027f 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts @@ -38,10 +38,6 @@ reset-delay-us = <2000>; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -83,17 +79,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { @@ -262,22 +247,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - &usb3_ss_phy { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts index 201ce97cd9..7978f90eb4 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts @@ -76,14 +76,6 @@ status = "okay"; }; - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - i2c_0: i2c@78b7000 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi index 0b94aafc83..da2067454c 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi @@ -64,19 +64,6 @@ status = "okay"; }; - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - qcom,single-phy; - qcom,num_gmac = <1>; - phy-mode = "rgmii-id"; - status = "okay"; - }; - i2c_0: i2c@78b7000 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; @@ -123,12 +110,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <5>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; - &qpic_bam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts index 6e087ba024..e8a14c9dee 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts @@ -44,10 +44,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -89,16 +85,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x18>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts index e9490c2690..8ae8658a7e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts @@ -30,10 +30,6 @@ status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -75,16 +71,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x18>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; }; keys { diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi index 47646e4b3c..fa755b3873 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi @@ -86,19 +86,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - qcom,single-phy; - qcom,num_gmac = <1>; - phy-mode = "rgmii-rxid"; - status = "okay"; - }; }; keys { @@ -136,12 +123,6 @@ status = "okay"; }; -&gmac0 { - qcom,phy_mdio_addr = <1>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; - &blsp1_i2c3 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts index c14023559b..423c24b89a 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts @@ -14,7 +14,6 @@ led-failsafe = &led_system_amber; led-running = &led_system_green; led-upgrade = &led_system_amber; - label-mac-device = &gmac0; }; soc { @@ -28,10 +27,6 @@ pinctrl-names = "default"; }; - ess-psgmii@98000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -57,17 +52,6 @@ watchdog@b017000 { status = "okay"; }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x20>; - switch_wan_bmp = <0x00>; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; }; leds { @@ -262,11 +246,3 @@ }; }; }; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -};