From: Holger Schurig Date: Thu, 4 Oct 2007 00:25:41 +0000 (-0700) Subject: [PATCH] add support for Marvell 8385 CF cards X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=27590d06e136167101c8c6347e7c2885c7f014b9;p=openwrt%2Fstaging%2Fblogic.git [PATCH] add support for Marvell 8385 CF cards This patch adds support for Marvell based 8385 compact flash cards. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index adf0d207da88..8d1541bbe257 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -275,6 +275,13 @@ config LIBERTAS_USB ---help--- A driver for Marvell Libertas 8388 USB devices. +config LIBERTAS_CS + tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards" + depends on LIBERTAS && PCMCIA && EXPERIMENTAL + select FW_LOADER + ---help--- + A driver for Marvell Libertas 8385 CompactFlash devices. + config LIBERTAS_DEBUG bool "Enable full debugging output in the Libertas module." depends on LIBERTAS diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile index b56b4c55de31..c469d569f090 100644 --- a/drivers/net/wireless/libertas/Makefile +++ b/drivers/net/wireless/libertas/Makefile @@ -6,6 +6,8 @@ libertas-objs := main.o wext.o \ ethtool.o assoc.o usb8xxx-objs += if_usb.o +libertas_cs-objs += if_cs.o obj-$(CONFIG_LIBERTAS) += libertas.o obj-$(CONFIG_LIBERTAS_USB) += usb8xxx.o +obj-$(CONFIG_LIBERTAS_CS) += libertas_cs.o diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c new file mode 100644 index 000000000000..888f023a74e1 --- /dev/null +++ b/drivers/net/wireless/libertas/if_cs.c @@ -0,0 +1,1005 @@ +/* + + Driver for the Marvell 8385 based compact flash WLAN cards. + + (C) 2007 by Holger Schurig + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#define DRV_NAME "libertas_cs" + +#include "decl.h" +#include "defs.h" +#include "dev.h" + + +/********************************************************************/ +/* Module stuff */ +/********************************************************************/ + +MODULE_AUTHOR("Holger Schurig "); +MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards"); +MODULE_LICENSE("GPL"); + + + +/********************************************************************/ +/* Data structures */ +/********************************************************************/ + +struct if_cs_card { + struct pcmcia_device *p_dev; + wlan_private *priv; + void __iomem *iobase; +}; + + + +/********************************************************************/ +/* Hardware access */ +/********************************************************************/ + +/* This define enables wrapper functions which allow you + to dump all register accesses. You normally won't this, + except for development */ +/* #define DEBUG_IO */ + +#ifdef DEBUG_IO +static int debug_output = 0; +#else +/* This way the compiler optimizes the printk's away */ +#define debug_output 0 +#endif + +static inline unsigned int if_cs_read8(struct if_cs_card *card, uint reg) +{ + unsigned int val = ioread8(card->iobase + reg); + if (debug_output) + printk(KERN_INFO "##inb %08x<%02x\n", reg, val); + return val; +} +static inline unsigned int if_cs_read16(struct if_cs_card *card, uint reg) +{ + unsigned int val = ioread16(card->iobase + reg); + if (debug_output) + printk(KERN_INFO "##inw %08x<%04x\n", reg, val); + return val; +} +static inline void if_cs_read16_rep( + struct if_cs_card *card, + uint reg, + void *buf, + unsigned long count) +{ + if (debug_output) + printk(KERN_INFO "##insw %08x<(0x%lx words)\n", + reg, count); + ioread16_rep(card->iobase + reg, buf, count); +} + +static inline void if_cs_write8(struct if_cs_card *card, uint reg, u8 val) +{ + if (debug_output) + printk(KERN_INFO "##outb %08x>%02x\n", reg, val); + iowrite8(val, card->iobase + reg); +} + +static inline void if_cs_write16(struct if_cs_card *card, uint reg, u16 val) +{ + if (debug_output) + printk(KERN_INFO "##outw %08x>%04x\n", reg, val); + iowrite16(val, card->iobase + reg); +} + +static inline void if_cs_write16_rep( + struct if_cs_card *card, + uint reg, + void *buf, + unsigned long count) +{ + if (debug_output) + printk(KERN_INFO "##outsw %08x>(0x%lx words)\n", + reg, count); + iowrite16_rep(card->iobase + reg, buf, count); +} + + +/* + * I know that polling/delaying is frowned upon. However, this procedure + * with polling is needed while downloading the firmware. At this stage, + * the hardware does unfortunately not create any interrupts. + * + * Fortunately, this function is never used once the firmware is in + * the card. :-) + * + * As a reference, see the "Firmware Specification v5.1", page 18 + * and 19. I did not follow their suggested timing to the word, + * but this works nice & fast anyway. + */ +static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 reg) +{ + int i; + + for (i = 0; i < 500; i++) { + u8 val = if_cs_read8(card, addr); + if (val == reg) + return i; + udelay(100); + } + return -ETIME; +} + + + +/* Host control registers and their bit definitions */ + +#define IF_CS_H_STATUS 0x00000000 +#define IF_CS_H_STATUS_TX_OVER 0x0001 +#define IF_CS_H_STATUS_RX_OVER 0x0002 +#define IF_CS_H_STATUS_DNLD_OVER 0x0004 + +#define IF_CS_H_INT_CAUSE 0x00000002 +#define IF_CS_H_IC_TX_OVER 0x0001 +#define IF_CS_H_IC_RX_OVER 0x0002 +#define IF_CS_H_IC_DNLD_OVER 0x0004 +#define IF_CS_H_IC_HOST_EVENT 0x0008 +#define IF_CS_H_IC_MASK 0x001f + +#define IF_CS_H_INT_MASK 0x00000004 +#define IF_CS_H_IM_MASK 0x001f + +#define IF_CS_H_WRITE_LEN 0x00000014 + +#define IF_CS_H_WRITE 0x00000016 + +#define IF_CS_H_CMD_LEN 0x00000018 + +#define IF_CS_H_CMD 0x0000001A + +#define IF_CS_C_READ_LEN 0x00000024 + +#define IF_CS_H_READ 0x00000010 + +/* Card control registers and their bit definitions */ + +#define IF_CS_C_STATUS 0x00000020 +#define IF_CS_C_S_TX_DNLD_RDY 0x0001 +#define IF_CS_C_S_RX_UPLD_RDY 0x0002 +#define IF_CS_C_S_CMD_DNLD_RDY 0x0004 +#define IF_CS_C_S_CMD_UPLD_RDY 0x0008 +#define IF_CS_C_S_CARDEVENT 0x0010 +#define IF_CS_C_S_MASK 0x001f +#define IF_CS_C_S_STATUS_MASK 0x7f00 +/* The following definitions should be the same as the MRVDRV_ ones */ + +#if MRVDRV_CMD_DNLD_RDY != IF_CS_C_S_CMD_DNLD_RDY +#error MRVDRV_CMD_DNLD_RDY and IF_CS_C_S_CMD_DNLD_RDY not in sync +#endif +#if MRVDRV_CMD_UPLD_RDY != IF_CS_C_S_CMD_UPLD_RDY +#error MRVDRV_CMD_UPLD_RDY and IF_CS_C_S_CMD_UPLD_RDY not in sync +#endif +#if MRVDRV_CARDEVENT != IF_CS_C_S_CARDEVENT +#error MRVDRV_CARDEVENT and IF_CS_C_S_CARDEVENT not in sync +#endif + +#define IF_CS_C_INT_CAUSE 0x00000022 +#define IF_CS_C_IC_MASK 0x001f + +#define IF_CS_C_SQ_READ_LOW 0x00000028 +#define IF_CS_C_SQ_HELPER_OK 0x10 + +#define IF_CS_C_CMD_LEN 0x00000030 + +#define IF_CS_C_CMD 0x00000012 + +#define IF_CS_SCRATCH 0x0000003F + + + +/********************************************************************/ +/* Interrupts */ +/********************************************************************/ + +static inline void if_cs_enable_ints(struct if_cs_card *card) +{ + lbs_deb_enter(LBS_DEB_CS); + if_cs_write16(card, IF_CS_H_INT_MASK, 0); +} + +static inline void if_cs_disable_ints(struct if_cs_card *card) +{ + lbs_deb_enter(LBS_DEB_CS); + if_cs_write16(card, IF_CS_H_INT_MASK, IF_CS_H_IM_MASK); +} + +static irqreturn_t if_cs_interrupt(int irq, void *data) +{ + struct if_cs_card *card = (struct if_cs_card *)data; + u16 int_cause; + + lbs_deb_enter(LBS_DEB_CS); + + int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE); + switch (int_cause) { + case 0x0000: + /* not for us */ + return IRQ_NONE; + case 0xffff: + /* if one reads junk, then probably the card was removed */ + card->priv->adapter->surpriseremoved = 1; + break; + case IF_CS_H_IC_TX_OVER: + if (card->priv->adapter->connect_status == LIBERTAS_CONNECTED) + netif_wake_queue(card->priv->dev); + /* fallthrought */ + default: + /* clear interrupt */ + if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause & IF_CS_C_IC_MASK); + if_cs_disable_ints(card); + } + + libertas_interrupt(card->priv->dev); + + return IRQ_HANDLED; +} + + + + +/********************************************************************/ +/* I/O */ +/********************************************************************/ + +/* + * Called from if_cs_host_to_card to send a command to the hardware + */ +static int if_cs_send_cmd(wlan_private *priv, u8 *buf, u16 nb) +{ + struct if_cs_card *card = (struct if_cs_card *)priv->card; + int ret = -1; + int loops = 0; + + lbs_deb_enter(LBS_DEB_CS); + + /* Is hardware ready? */ + while (1) { + u16 val = if_cs_read16(card, IF_CS_C_STATUS); + if (val & IF_CS_C_S_CMD_DNLD_RDY) + break; + if (++loops > 100) { + lbs_pr_err("card not ready for commands\n"); + goto done; + } + mdelay(1); + } + + if_cs_write16(card, IF_CS_H_CMD_LEN, nb); + + if_cs_write16_rep(card, IF_CS_H_CMD, buf, nb / 2); + /* Are we supposed to transfer an odd amount of bytes? */ + if (nb & 1) + if_cs_write8(card, IF_CS_H_CMD, buf[nb-1]); + + /* "Assert the download over interrupt command in the Host + * status register" */ + if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER); + + /* "Assert the download over interrupt command in the Card + * interrupt case register" */ + if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER); + ret = 0; + +done: + lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); + return ret; +} + + +/* + * Called from if_cs_host_to_card to send a data to the hardware + */ +static void if_cs_send_data(wlan_private *priv, u8 *buf, u16 nb) +{ + struct if_cs_card *card = (struct if_cs_card *)priv->card; + + lbs_deb_enter(LBS_DEB_CS); + + if_cs_write16(card, IF_CS_H_WRITE_LEN, nb); + + /* write even number of bytes, then odd byte if necessary */ + if_cs_write16_rep(card, IF_CS_H_WRITE, buf, nb / 2); + if (nb & 1) + if_cs_write8(card, IF_CS_H_WRITE, buf[nb-1]); + + if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_TX_OVER); + if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_STATUS_TX_OVER); + + lbs_deb_leave(LBS_DEB_CS); +} + + +/* + * Get the command result out of the card. + */ +static int if_cs_receive_cmdres(wlan_private *priv, u8* data, u32 *len) +{ + int ret = -1; + u16 val; + + lbs_deb_enter(LBS_DEB_CS); + + /* is hardware ready? */ + val = if_cs_read16(priv->card, IF_CS_C_STATUS); + if ((val & IF_CS_C_S_CMD_UPLD_RDY) == 0) { + lbs_pr_err("card not ready for CMD\n"); + goto out; + } + + *len = if_cs_read16(priv->card, IF_CS_C_CMD_LEN); + if ((*len == 0) || (*len > MRVDRV_SIZE_OF_CMD_BUFFER)) { + lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len); + goto out; + } + + /* read even number of bytes, then odd byte if necessary */ + if_cs_read16_rep(priv->card, IF_CS_C_CMD, data, *len/sizeof(u16)); + if (*len & 1) + data[*len-1] = if_cs_read8(priv->card, IF_CS_C_CMD); + + ret = 0; +out: + lbs_deb_leave_args(LBS_DEB_CS, "ret %d, len %d", ret, *len); + return ret; +} + + +static struct sk_buff *if_cs_receive_data(wlan_private *priv) +{ + struct sk_buff *skb = NULL; + u16 len; + u8 *data; + + lbs_deb_enter(LBS_DEB_CS); + + len = if_cs_read16(priv->card, IF_CS_C_READ_LEN); + if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) { + lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len); + priv->stats.rx_dropped++; + printk(KERN_INFO "##HS %s:%d TODO\n", __FUNCTION__, __LINE__); + goto dat_err; + } + + //TODO: skb = dev_alloc_skb(len+ETH_FRAME_LEN+MRVDRV_SNAP_HEADER_LEN+EXTRA_LEN); + skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE); + if (!skb) + goto out; + data = skb_put(skb, len); + + /* read even number of bytes, then odd byte if necessary */ + if_cs_read16_rep(priv->card, IF_CS_H_READ, data, len/sizeof(u16)); + if (len & 1) + data[len-1] = if_cs_read8(priv->card, IF_CS_H_READ); + +dat_err: + if_cs_write16(priv->card, IF_CS_H_STATUS, IF_CS_H_STATUS_RX_OVER); + if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_RX_OVER); + +out: + lbs_deb_leave_args(LBS_DEB_CS, "ret %p", skb); + return skb; +} + + + +/********************************************************************/ +/* Firmware */ +/********************************************************************/ + +/* + * Tries to program the helper firmware. + * + * Return 0 on success + */ +static int if_cs_prog_helper(struct if_cs_card *card) +{ + int ret = 0; + int sent = 0; + u8 scratch; + const struct firmware *fw; + + lbs_deb_enter(LBS_DEB_CS); + + scratch = if_cs_read8(card, IF_CS_SCRATCH); + + /* "If the value is 0x5a, the firmware is already + * downloaded successfully" + */ + if (scratch == 0x5a) + goto done; + + /* "If the value is != 00, it is invalid value of register */ + if (scratch != 0x00) { + ret = -ENODEV; + goto done; + } + + /* TODO: make firmware file configurable */ + ret = request_firmware(&fw, "libertas_cs_helper.fw", + &handle_to_dev(card->p_dev)); + if (ret) { + lbs_pr_err("can't load helper firmware\n"); + ret = -ENODEV; + goto done; + } + lbs_deb_cs("helper size %d\n", fw->size); + + /* "Set the 5 bytes of the helper image to 0" */ + /* Not needed, this contains an ARM branch instruction */ + + for (;;) { + /* "the number of bytes to send is 256" */ + int count = 256; + int remain = fw->size - sent; + + if (remain < count) + count = remain; + /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n", + __LINE__, sent, fw->size); */ + + /* "write the number of bytes to be sent to the I/O Command + * write length register" */ + if_cs_write16(card, IF_CS_H_CMD_LEN, count); + + /* "write this to I/O Command port register as 16 bit writes */ + if (count) + if_cs_write16_rep(card, IF_CS_H_CMD, + &fw->data[sent], + count >> 1); + + /* "Assert the download over interrupt command in the Host + * status register" */ + if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER); + + /* "Assert the download over interrupt command in the Card + * interrupt case register" */ + if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER); + + /* "The host polls the Card Status register ... for 50 ms before + declaring a failure */ + ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS, + IF_CS_C_S_CMD_DNLD_RDY); + if (ret < 0) { + lbs_pr_err("can't download helper at 0x%x, ret %d\n", + sent, ret); + goto done; + } + + if (count == 0) + break; + + sent += count; + } + + release_firmware(fw); + ret = 0; + +done: + lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); + return ret; +} + + +static int if_cs_prog_real(struct if_cs_card *card) +{ + const struct firmware *fw; + int ret = 0; + int retry = 0; + int len = 0; + int sent; + + lbs_deb_enter(LBS_DEB_CS); + + /* TODO: make firmware file configurable */ + ret = request_firmware(&fw, "libertas_cs.fw", + &handle_to_dev(card->p_dev)); + if (ret) { + lbs_pr_err("can't load firmware\n"); + ret = -ENODEV; + goto done; + } + lbs_deb_cs("fw size %d\n", fw->size); + + ret = if_cs_poll_while_fw_download(card, IF_CS_C_SQ_READ_LOW, IF_CS_C_SQ_HELPER_OK); + if (ret < 0) { + int i; + lbs_pr_err("helper firmware doesn't answer\n"); + for (i = 0; i < 0x50; i += 2) + printk(KERN_INFO "## HS %02x: %04x\n", + i, if_cs_read16(card, i)); + goto err_release; + } + + for (sent = 0; sent < fw->size; sent += len) { + len = if_cs_read16(card, IF_CS_C_SQ_READ_LOW); + /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n", + __LINE__, sent, fw->size); */ + if (len & 1) { + retry++; + lbs_pr_info("odd, need to retry this firmware block\n"); + } else { + retry = 0; + } + + if (retry > 20) { + lbs_pr_err("could not download firmware\n"); + ret = -ENODEV; + goto err_release; + } + if (retry) { + sent -= len; + } + + + if_cs_write16(card, IF_CS_H_CMD_LEN, len); + + if_cs_write16_rep(card, IF_CS_H_CMD, + &fw->data[sent], + (len+1) >> 1); + if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER); + if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER); + + ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS, + IF_CS_C_S_CMD_DNLD_RDY); + if (ret < 0) { + lbs_pr_err("can't download firmware at 0x%x\n", sent); + goto err_release; + } + } + + ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a); + if (ret < 0) { + lbs_pr_err("firmware download failed\n"); + goto err_release; + } + + ret = 0; + goto done; + + +err_release: + release_firmware(fw); + +done: + lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); + return ret; +} + + + +/********************************************************************/ +/* Callback functions for libertas.ko */ +/********************************************************************/ + +static int if_cs_register_dev(wlan_private *priv) +{ + struct if_cs_card *card = (struct if_cs_card *)priv->card; + + lbs_deb_enter(LBS_DEB_CS); + + card->priv = priv; + + return 0; +} + + +static int if_cs_unregister_dev(wlan_private *priv) +{ + lbs_deb_enter(LBS_DEB_CS); + + /* + * Nothing special here. Because the device's power gets turned off + * anyway, there's no need to send a RESET command like in if_usb.c + */ + + return 0; +} + + +/* + * This callback is a dummy. The reason is that the USB code needs + * to have various things set up in order to be able to download the + * firmware. That's not needed in our case. + * + * On the contrary, if libertas_add_card() has been called and we're + * then later called via libertas_activate_card(), but without a valid + * firmware, then it's quite tedious to tear down the half-installed + * card. Therefore, we download the firmware before calling adding/ + * activating the card in the first place. If that doesn't work, we + * won't call into libertas.ko at all. + */ + +static int if_cs_prog_firmware(wlan_private *priv) +{ + priv->adapter->fw_ready = 1; + return 0; +} + + +/* Send commands or data packets to the card */ +static int if_cs_host_to_card(wlan_private *priv, u8 type, u8 *buf, u16 nb) +{ + int ret = -1; + + lbs_deb_enter_args(LBS_DEB_CS, "type %d, bytes %d", type, nb); + + switch (type) { + case MVMS_DAT: + priv->dnld_sent = DNLD_CMD_SENT; + if_cs_send_data(priv, buf, nb); + ret = 0; + break; + case MVMS_CMD: + ret = if_cs_send_cmd(priv, buf, nb); + break; + default: + lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type); + } + + lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); + return ret; +} + + +static int if_cs_get_int_status(wlan_private *priv, u8 *ireg) +{ + struct if_cs_card *card = (struct if_cs_card *)priv->card; + //wlan_adapter *adapter = priv->adapter; + int ret = 0; + u16 int_cause; + u8 *cmdbuf; + *ireg = 0; + + lbs_deb_enter(LBS_DEB_CS); + + if (priv->adapter->surpriseremoved) + goto out; + + int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE) & IF_CS_C_IC_MASK; + if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause); + + *ireg = if_cs_read16(card, IF_CS_C_STATUS) & IF_CS_C_S_MASK; + if_cs_enable_ints(card); + + if (!*ireg) + goto sbi_get_int_status_exit; + +sbi_get_int_status_exit: + + /* is there a data packet for us? */ + if (*ireg & IF_CS_C_S_RX_UPLD_RDY) { + struct sk_buff *skb = if_cs_receive_data(priv); + libertas_process_rxed_packet(priv, skb); + *ireg &= ~IF_CS_C_S_RX_UPLD_RDY; + } + + if (*ireg & IF_CS_C_S_TX_DNLD_RDY) { + priv->dnld_sent = DNLD_RES_RECEIVED; + } + + /* Card has a command result for us */ + if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) { + spin_lock(&priv->adapter->driver_lock); + if (!priv->adapter->cur_cmd) { + cmdbuf = priv->upld_buf; + priv->adapter->hisregcpy &= ~IF_CS_C_S_RX_UPLD_RDY; + } else { + cmdbuf = priv->adapter->cur_cmd->bufvirtualaddr; + } + + ret = if_cs_receive_cmdres(priv, cmdbuf, &priv->upld_len); + spin_unlock(&priv->adapter->driver_lock); + if (ret < 0) + lbs_pr_err("could not receive cmd from card\n"); + } + +out: + lbs_deb_leave_args(LBS_DEB_CS, "ret %d, ireg 0x%x, hisregcpy 0x%x", ret, *ireg, priv->adapter->hisregcpy); + return ret; +} + + +static int if_cs_read_event_cause(wlan_private *priv) +{ + lbs_deb_enter(LBS_DEB_CS); + + priv->adapter->eventcause = (if_cs_read16(priv->card, IF_CS_C_STATUS) & IF_CS_C_S_STATUS_MASK) >> 5; + if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_HOST_EVENT); + + return 0; +} + + + +/********************************************************************/ +/* Card Services */ +/********************************************************************/ + +/* + * After a card is removed, if_cs_release() will unregister the + * device, and release the PCMCIA configuration. If the device is + * still open, this will be postponed until it is closed. + */ +static void if_cs_release(struct pcmcia_device *p_dev) +{ + struct if_cs_card *card = p_dev->priv; + + lbs_deb_enter(LBS_DEB_CS); + + pcmcia_disable_device(p_dev); + free_irq(p_dev->irq.AssignedIRQ, card); + if (card->iobase) + ioport_unmap(card->iobase); + + lbs_deb_leave(LBS_DEB_CS); +} + + +/* + * This creates an "instance" of the driver, allocating local data + * structures for one device. The device is registered with Card + * Services. + * + * The dev_link structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a card + * insertion event. + */ +static int if_cs_probe(struct pcmcia_device *p_dev) +{ + int ret = -ENOMEM; + wlan_private *priv; + struct if_cs_card *card; + /* CIS parsing */ + tuple_t tuple; + cisparse_t parse; + cistpl_cftable_entry_t *cfg = &parse.cftable_entry; + cistpl_io_t *io = &cfg->io; + u_char buf[64]; + + lbs_deb_enter(LBS_DEB_CS); + + card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL); + if (!card) { + lbs_pr_err("error in kzalloc\n"); + goto out; + } + card->p_dev = p_dev; + p_dev->priv = card; + + p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; + p_dev->irq.Handler = NULL; + p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID; + + p_dev->conf.Attributes = 0; + p_dev->conf.IntType = INT_MEMORY_AND_IO; + + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 || + (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 || + (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0) + { + lbs_pr_err("error in pcmcia_get_first_tuple etc\n"); + goto out1; + } + + p_dev->conf.ConfigIndex = cfg->index; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1) { + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + } + + /* IO window settings */ + if (cfg->io.nwin != 1) { + lbs_pr_err("wrong CIS (check number of IO windows)\n"); + ret = -ENODEV; + goto out1; + } + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + + /* This reserves IO space but doesn't actually enable it */ + ret = pcmcia_request_io(p_dev, &p_dev->io); + if (ret) { + lbs_pr_err("error in pcmcia_request_io\n"); + goto out1; + } + + /* + * Allocate an interrupt line. Note that this does not assign + * a handler to the interrupt, unless the 'Handler' member of + * the irq structure is initialized. + */ + if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) { + ret = pcmcia_request_irq(p_dev, &p_dev->irq); + if (ret) { + lbs_pr_err("error in pcmcia_request_irq\n"); + goto out1; + } + } + + /* Initialize io access */ + card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1); + if (!card->iobase) { + lbs_pr_err("error in ioport_map\n"); + ret = -EIO; + goto out1; + } + + /* + * This actually configures the PCMCIA socket -- setting up + * the I/O windows and the interrupt mapping, and putting the + * card and host interface into "Memory and IO" mode. + */ + ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + if (ret) { + lbs_pr_err("error in pcmcia_request_configuration\n"); + goto out2; + } + + /* Finally, report what we've done */ + lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n", + p_dev->irq.AssignedIRQ, p_dev->io.BasePort1, + p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1); + + if_cs_enable_ints(card); + + /* Load the firmware early, before calling into libertas.ko */ + ret = if_cs_prog_helper(card); + if (ret == 0) + ret = if_cs_prog_real(card); + if (ret) + goto out2; + + /* Make this card known to the libertas driver */ + priv = libertas_add_card(card, &p_dev->dev); + if (!priv) { + ret = -ENOMEM; + goto out2; + } + + /* Store pointers to our call-back functions */ + priv->card = card; + priv->hw_register_dev = if_cs_register_dev; + priv->hw_unregister_dev = if_cs_unregister_dev; + priv->hw_prog_firmware = if_cs_prog_firmware; + priv->hw_host_to_card = if_cs_host_to_card; + priv->hw_get_int_status = if_cs_get_int_status; + priv->hw_read_event_cause = if_cs_read_event_cause; + + /* Now actually get the IRQ */ + ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt, + IRQF_SHARED, DRV_NAME, card); + if (ret) { + lbs_pr_err("error in request_irq\n"); + goto out3; + } + + /* And finally bring the card up */ + if (libertas_activate_card(priv) != 0) { + lbs_pr_err("could not activate card\n"); + goto out3; + } + + ret = 0; + goto out; + +out3: + libertas_remove_card(priv); +out2: + ioport_unmap(card->iobase); +out1: + pcmcia_disable_device(p_dev); +out: + lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); + return ret; +} + + +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void if_cs_detach(struct pcmcia_device *p_dev) +{ + struct if_cs_card *card = p_dev->priv; + + lbs_deb_enter(LBS_DEB_CS); + + libertas_remove_card(card->priv); + if_cs_release(p_dev); + kfree(card); + + lbs_deb_leave(LBS_DEB_CS); +} + + + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +static struct pcmcia_device_id if_cs_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, if_cs_ids); + + +static struct pcmcia_driver libertas_driver = { + .owner = THIS_MODULE, + .drv = { + .name = DRV_NAME, + }, + .probe = if_cs_probe, + .remove = if_cs_detach, + .id_table = if_cs_ids, +}; + + +static int __init if_cs_init(void) +{ + int ret; + + lbs_deb_enter(LBS_DEB_CS); + ret = pcmcia_register_driver(&libertas_driver); + lbs_deb_leave(LBS_DEB_CS); + return ret; +} + + +static void __exit if_cs_exit(void) +{ + lbs_deb_enter(LBS_DEB_CS); + pcmcia_unregister_driver(&libertas_driver); + lbs_deb_leave(LBS_DEB_CS); +} + + +module_init(if_cs_init); +module_exit(if_cs_exit);