From: Conor O'Gorman Date: Sun, 15 Jan 2017 22:01:05 +0000 (+0000) Subject: ar71xx: add Abicom SC1750 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=274546046de47883031d8279fdc60856517fb263;p=openwrt%2Fstaging%2Fadrian.git ar71xx: add Abicom SC1750 support Support Abicom International Scorpion SC1750 Board QCA9550 700MHz Extended Temperature Range 256MB DDR2 256MB Nand Flash 16MB Nor Flash 1x SFP, 1x PCIe 2x 10/100/1000 Ethernet 135x100 mm 802.11ng/g/b 802.11ac/an/a Signed-off-by: Conor O'Gorman --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 58f1dd6116..fb0dda3ddc 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -440,6 +440,7 @@ re450) ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt" ;; +sc1750|\ sc450) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ;; diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 83a0e50197..4bbb93a60f 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -44,6 +44,7 @@ get_status_led() { mr12|\ mr16|\ nbg6616|\ + sc1750|\ sc450|\ tl-wpa8630) status_led="$board:green:power" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 6c3396b6a5..eb8b671b97 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -884,6 +884,9 @@ ar71xx_board_detect() { *RW2458N) name="rw2458n" ;; + *SC1750) + name="sc1750" + ;; *SC300M) name="sc300m" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index f50dd80ef3..02eb960db3 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -254,6 +254,7 @@ platform_check_image() { rocket-m-xw|\ rocket-m|\ rw2458n|\ + sc1750|\ sc300m|\ sc450|\ sr3200|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index b6345d6705..427e8bd2be 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -148,6 +148,7 @@ CONFIG_ATH79_MACH_R6100=y # CONFIG_ATH79_MACH_RBSXTLITE is not set CONFIG_ATH79_MACH_RE450=y CONFIG_ATH79_MACH_RW2458N=y +CONFIG_ATH79_MACH_SC1750=y CONFIG_ATH79_MACH_SC300M=y CONFIG_ATH79_MACH_SC450=y CONFIG_ATH79_MACH_SMART_300=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 28555060d1..3c10be9e24 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -42,6 +42,17 @@ config ATH79_MACH_TUBE2H select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_SC1750 + bool "Abicom SC1750 board support" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_SC300M bool "Abicom SC300M board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 9d6b6b90bf..8ce07a49b5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -152,6 +152,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o +obj-$(CONFIG_ATH79_MACH_SC1750) += mach-sc1750.o obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o obj-$(CONFIG_ATH79_MACH_SC450) += mach-sc450.o obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c new file mode 100644 index 0000000000..653d6423b0 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c @@ -0,0 +1,145 @@ +/* + * Abicom International Scorpion SC1750 support. + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Gabor Juhos + * Copyright (c) 2017 Conor O'Gorman + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include + +#include + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-nfc.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define SC1750_GPIO_LED_POWER 11 +#define SC1750_GPIO_LED_ERR1 12 +#define SC1750_GPIO_LED_WLAN 13 +#define SC1750_GPIO_LED_ERR2 14 +#define SC1750_GPIO_LED_OK3 15 +#define SC1750_GPIO_LED_ERR3 16 +#define SC1750_GPIO_BTN_RESET 4 + +#define SC1750_KEYS_POLL_INTERVAL 20 /* msecs */ +#define SC1750_KEYS_DEBOUNCE_INTERVAL (3 * SC1750_KEYS_POLL_INTERVAL) + +#define SC1750_MAC0_OFFSET 0 +#define SC1750_MAC1_OFFSET 6 +#define SC1750_WMAC_CALDATA_OFFSET 0x1000 +#define SC1750_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led sc1750_leds_gpio[] __initdata = { + { + .name = "sc1750:green:power", + .gpio = SC1750_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "sc1750:red:power", + .gpio = SC1750_GPIO_LED_ERR1, + .active_low = 1, + }, + { + .name = "sc1750:green:wlan", + .gpio = SC1750_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "sc1750:red:wlan", + .gpio = SC1750_GPIO_LED_ERR2, + .active_low = 1, + } +}; + +static struct gpio_keys_button sc1750_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = SC1750_KEYS_DEBOUNCE_INTERVAL, + .gpio = SC1750_GPIO_BTN_RESET, + .active_low = 0, + } +}; + +static struct at803x_platform_data at803x_data = { + .disable_smarteee = 1, + .enable_rgmii_rx_delay = 0, + .enable_rgmii_tx_delay = 0, +}; + +static struct mdio_board_info sc1750_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 1, + .platform_data = &at803x_data, + }, +}; + +static void __init sc1750_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(sc1750_leds_gpio), + sc1750_leds_gpio); + ath79_register_gpio_keys_polled(-1, SC1750_KEYS_POLL_INTERVAL, + ARRAY_SIZE(sc1750_gpio_keys), + sc1750_gpio_keys); + + ath79_register_usb(); + ath79_register_nfc(); + + ath79_register_wmac(art + SC1750_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_mdio(0, 0); + mdiobus_register_board_info(sc1750_mdio0_info, + ARRAY_SIZE(sc1750_mdio0_info)); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + SC1750_MAC0_OFFSET, 0); + + ath79_eth0_pll_data.pll_1000 = 0xa6000101; + ath79_eth0_pll_data.pll_100 = 0xa4000101; + /* GMAC0 is connected to the RMGII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = 0xF; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + + ath79_register_eth(0); + + /* GMAC1 is connected to the SGMII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(1); + + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_SC1750, "SC1750", "Abicom SC1750", sc1750_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 03fdc5e51d..b7946e55e4 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -169,6 +169,7 @@ enum ath79_mach_type { ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ ATH79_MACH_RE450, /* TP-LINK RE450 */ ATH79_MACH_RW2458N, /* Redwave RW2458N */ + ATH79_MACH_SC1750, /* Abicom SC1750 */ ATH79_MACH_SC300M, /* Abicom SC300M */ ATH79_MACH_SC450, /* Abicom SC450 */ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 02b90b0aa6..0214c530ee 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -464,6 +464,16 @@ define Device/onion-omega endef TARGET_DEVICES += onion-omega +define Device/sc1750 + DEVICE_TITLE := Abicom SC1750 + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport + BOARDNAME = SC1750 + IMAGE_SIZE = 15744k + CONSOLE = ttyS0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART) +endef +TARGET_DEVICES += sc1750 + define Device/sc300m DEVICE_TITLE := Abicom SC300M DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport