From: Felix Fietkau Date: Fri, 26 Jan 2024 10:03:39 +0000 (+0100) Subject: wifi-scripts: add new package, move wifi scripts to a single place X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2716853132d23a35fc18cbe8b438aa70e4d2c563;p=openwrt%2Fstaging%2Fthess.git wifi-scripts: add new package, move wifi scripts to a single place Signed-off-by: Felix Fietkau --- diff --git a/package/base-files/files/sbin/wifi b/package/base-files/files/sbin/wifi deleted file mode 100755 index 5231063a2b..0000000000 --- a/package/base-files/files/sbin/wifi +++ /dev/null @@ -1,272 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -. /lib/functions.sh -. /usr/share/libubox/jshn.sh - -usage() { - cat </dev/null >/dev/null; then - eval "scan_$iftype '$device'" - eval "${1}_$iftype '$device'" || echo "$device($iftype): ${1} failed" - elif [ ! -f /lib/netifd/wireless/$iftype.sh ]; then - echo "$device($iftype): Interface type not supported" - fi - ); done -} - -wifi_updown() { - cmd=down - [ enable = "$1" ] && { - _wifi_updown disable "$2" - ubus_wifi_cmd "$cmd" "$2" - ubus call network reload - scan_wifi - cmd=up - } - [ reconf = "$1" ] && { - ubus call network reload - scan_wifi - cmd=reconf - } - ubus_wifi_cmd "$cmd" "$2" - _wifi_updown "$@" -} - -wifi_reload_legacy() { - _wifi_updown "disable" "$1" - scan_wifi - _wifi_updown "enable" "$1" -} - -wifi_reload() { - ubus call network reload - wifi_reload_legacy -} - -wifi_detect_notice() { - >&2 echo "WARNING: Wifi detect is deprecated. Use wifi config instead" - >&2 echo "For more information, see commit 5f8f8a366136a07df661e31decce2458357c167a" - exit 1 -} - -wifi_config() { - [ -e /tmp/.config_pending ] && return - [ ! -f /etc/config/wireless ] && touch /etc/config/wireless - - for driver in $DRIVERS; do ( - if eval "type detect_$driver" 2>/dev/null >/dev/null; then - eval "detect_$driver" || echo "$driver: Detect failed" >&2 - else - echo "$driver: Hardware detection not supported" >&2 - fi - ); done -} - -start_net() {( - local iface="$1" - local config="$2" - local vifmac="$3" - - [ -f "/var/run/$iface.pid" ] && kill "$(cat /var/run/${iface}.pid)" 2>/dev/null - [ -z "$config" ] || { - include /lib/network - scan_interfaces - for config in $config; do - setup_interface "$iface" "$config" "" "$vifmac" - done - } -)} - -set_wifi_up() { - local cfg="$1" - local ifname="$2" - uci_set_state wireless "$cfg" up 1 - uci_set_state wireless "$cfg" ifname "$ifname" -} - -set_wifi_down() { - local cfg="$1" - local vifs vif vifstr - - [ -f "/var/run/wifi-${cfg}.pid" ] && - kill "$(cat "/var/run/wifi-${cfg}.pid")" 2>/dev/null - uci_revert_state wireless "$cfg" - config_get vifs "$cfg" vifs - for vif in $vifs; do - uci_revert_state wireless "$vif" - done -} - -scan_wifi() { - local cfgfile="$1" - DEVICES= - config_cb() { - local type="$1" - local section="$2" - - # section start - case "$type" in - wifi-device) - append DEVICES "$section" - config_set "$section" vifs "" - config_set "$section" ht_capab "" - ;; - esac - - # section end - config_get TYPE "$CONFIG_SECTION" TYPE - case "$TYPE" in - wifi-iface) - config_get device "$CONFIG_SECTION" device - config_get vifs "$device" vifs - append vifs "$CONFIG_SECTION" - config_set "$device" vifs "$vifs" - ;; - esac - } - config_load "${cfgfile:-wireless}" -} - -DEVICES= -DRIVERS= -include /lib/wifi -scan_wifi - -case "$1" in - down) wifi_updown "disable" "$2";; - detect) wifi_detect_notice ;; - config) wifi_config ;; - status) ubus_wifi_cmd "status" "$2";; - isup) wifi_isup "$2"; exit $?;; - reload) wifi_reload "$2";; - reload_legacy) wifi_reload_legacy "$2";; - --help|help) usage;; - reconf) wifi_updown "reconf" "$2";; - ''|up) wifi_updown "enable" "$2";; - *) usage; exit 1;; -esac diff --git a/package/kernel/broadcom-wl/Makefile b/package/kernel/broadcom-wl/Makefile index a1feacbe29..101dbccbb5 100644 --- a/package/kernel/broadcom-wl/Makefile +++ b/package/kernel/broadcom-wl/Makefile @@ -40,7 +40,7 @@ endef define KernelPackage/brcm-wl/Default $(call Package/broadcom-wl/Default) SECTION:=kernel - DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm63xx) +wireless-tools +@KERNEL_WIRELESS_EXT + DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm63xx) +wireless-tools +wifi-scripts +@KERNEL_WIRELESS_EXT TITLE:=Kernel driver for BCM43xx chipsets FILES:=$(PKG_BUILD_DIR)/driver$(1)/wl.ko $(PKG_BUILD_DIR)/glue/wl_glue.ko AUTOLOAD:=$(call AutoProbe,wl) diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index 17e0d9451e..6ca5c89cfa 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -92,7 +92,7 @@ PKG_CONFIG_DEPENDS += \ define KernelPackage/cfg80211 $(call KernelPackage/mac80211/Default) TITLE:=cfg80211 - wireless configuration API - DEPENDS+= +iw +iwinfo +wireless-regdb +USE_RFKILL:kmod-rfkill + DEPENDS+= +iw +iwinfo +wifi-scripts +wireless-regdb +USE_RFKILL:kmod-rfkill ABI_VERSION:=$(PKG_VERSION)-$(PKG_RELEASE) FILES:= \ $(PKG_BUILD_DIR)/compat/compat.ko \ @@ -384,14 +384,6 @@ define Build/InstallDev endef -define KernelPackage/cfg80211/install - $(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless - $(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi - $(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless - $(INSTALL_DIR) $(1)/etc/hotplug.d/ieee80211 - $(INSTALL_DATA) ./files/mac80211.hotplug $(1)/etc/hotplug.d/ieee80211/10-wifi-detect -endef - $(eval $(foreach drv,$(PKG_DRIVERS),$(call KernelPackage,$(drv)))) $(eval $(call KernelPackage,cfg80211)) $(eval $(call KernelPackage,mac80211)) diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh deleted file mode 100644 index 49ffb219bc..0000000000 --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh +++ /dev/null @@ -1,1197 +0,0 @@ -#!/bin/sh -. /lib/netifd/netifd-wireless.sh -. /lib/netifd/hostapd.sh -. /lib/functions/system.sh - -init_wireless_driver "$@" - -MP_CONFIG_INT="mesh_retry_timeout mesh_confirm_timeout mesh_holding_timeout mesh_max_peer_links - mesh_max_retries mesh_ttl mesh_element_ttl mesh_hwmp_max_preq_retries - mesh_path_refresh_time mesh_min_discovery_timeout mesh_hwmp_active_path_timeout - mesh_hwmp_preq_min_interval mesh_hwmp_net_diameter_traversal_time mesh_hwmp_rootmode - mesh_hwmp_rann_interval mesh_gate_announcements mesh_sync_offset_max_neighor - mesh_rssi_threshold mesh_hwmp_active_path_to_root_timeout mesh_hwmp_root_interval - mesh_hwmp_confirmation_interval mesh_awake_window mesh_plink_timeout" -MP_CONFIG_BOOL="mesh_auto_open_plinks mesh_fwding" -MP_CONFIG_STRING="mesh_power_mode" - -wdev_tool() { - ucode /usr/share/hostap/wdev.uc "$@" -} - -ubus_call() { - flock /var/run/hostapd.lock ubus call "$@" -} - -drv_mac80211_init_device_config() { - hostapd_common_add_device_config - - config_add_string path phy 'macaddr:macaddr' - config_add_string tx_burst - config_add_string distance - config_add_int beacon_int chanbw frag rts - config_add_int rxantenna txantenna txpower min_tx_power - config_add_int num_global_macaddr multiple_bssid - config_add_boolean noscan ht_coex acs_exclude_dfs background_radar - config_add_array ht_capab - config_add_array channels - config_add_array scan_list - config_add_boolean \ - rxldpc \ - short_gi_80 \ - short_gi_160 \ - tx_stbc_2by1 \ - su_beamformer \ - su_beamformee \ - mu_beamformer \ - mu_beamformee \ - he_su_beamformer \ - he_su_beamformee \ - he_mu_beamformer \ - vht_txop_ps \ - htc_vht \ - rx_antenna_pattern \ - tx_antenna_pattern \ - he_spr_sr_control \ - he_spr_psr_enabled \ - he_bss_color_enabled \ - he_twt_required - config_add_int \ - beamformer_antennas \ - beamformee_antennas \ - vht_max_a_mpdu_len_exp \ - vht_max_mpdu \ - vht_link_adapt \ - vht160 \ - rx_stbc \ - tx_stbc \ - he_bss_color \ - he_spr_non_srg_obss_pd_max_offset - config_add_boolean \ - ldpc \ - greenfield \ - short_gi_20 \ - short_gi_40 \ - max_amsdu \ - dsss_cck_40 -} - -drv_mac80211_init_iface_config() { - hostapd_common_add_bss_config - - config_add_string 'macaddr:macaddr' ifname - - config_add_boolean wds powersave enable - config_add_string wds_bridge - config_add_int maxassoc - config_add_int max_listen_int - config_add_int dtim_period - config_add_int start_disabled - - # mesh - config_add_string mesh_id - config_add_int $MP_CONFIG_INT - config_add_boolean $MP_CONFIG_BOOL - config_add_string $MP_CONFIG_STRING -} - -mac80211_add_capabilities() { - local __var="$1"; shift - local __mask="$1"; shift - local __out= oifs - - oifs="$IFS" - IFS=: - for capab in "$@"; do - set -- $capab - - [ "$(($4))" -gt 0 ] || continue - [ "$(($__mask & $2))" -eq "$((${3:-$2}))" ] || continue - __out="$__out[$1]" - done - IFS="$oifs" - - export -n -- "$__var=$__out" -} - -mac80211_add_he_capabilities() { - local __out= oifs - - oifs="$IFS" - IFS=: - for capab in "$@"; do - set -- $capab - [ "$(($4))" -gt 0 ] || continue - [ "$(((0x$2) & $3))" -gt 0 ] || { - eval "$1=0" - continue - } - append base_cfg "$1=1" "$N" - done - IFS="$oifs" -} - -mac80211_hostapd_setup_base() { - local phy="$1" - - json_select config - - [ "$auto_channel" -gt 0 ] && channel=acs_survey - - [ "$auto_channel" -gt 0 ] && json_get_vars acs_exclude_dfs - [ -n "$acs_exclude_dfs" ] && [ "$acs_exclude_dfs" -gt 0 ] && - append base_cfg "acs_exclude_dfs=1" "$N" - - json_get_vars noscan ht_coex min_tx_power:0 tx_burst - json_get_values ht_capab_list ht_capab - json_get_values channel_list channels - - [ "$auto_channel" = 0 ] && [ -z "$channel_list" ] && \ - channel_list="$channel" - - [ "$min_tx_power" -gt 0 ] && append base_cfg "min_tx_power=$min_tx_power" "$N" - - set_default noscan 0 - - [ "$noscan" -gt 0 ] && hostapd_noscan=1 - [ "$tx_burst" = 0 ] && tx_burst= - - chan_ofs=0 - [ "$band" = "6g" ] && chan_ofs=1 - - ieee80211n=1 - ht_capab= - case "$htmode" in - VHT20|HT20|HE20) ;; - HT40*|VHT40|VHT80|VHT160|HE40|HE80|HE160) - case "$hwmode" in - a) - case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in - 1) ht_capab="[HT40+]";; - 0) ht_capab="[HT40-]";; - esac - ;; - *) - case "$htmode" in - HT40+) ht_capab="[HT40+]";; - HT40-) ht_capab="[HT40-]";; - *) - if [ "$channel" -lt 7 ]; then - ht_capab="[HT40+]" - else - ht_capab="[HT40-]" - fi - ;; - esac - ;; - esac - [ "$auto_channel" -gt 0 ] && ht_capab="[HT40+]" - ;; - *) ieee80211n= ;; - esac - - [ -n "$ieee80211n" ] && { - append base_cfg "ieee80211n=1" "$N" - - set_default ht_coex 0 - append base_cfg "ht_coex=$ht_coex" "$N" - - json_get_vars \ - ldpc:1 \ - greenfield:0 \ - short_gi_20:1 \ - short_gi_40:1 \ - tx_stbc:1 \ - rx_stbc:3 \ - max_amsdu:1 \ - dsss_cck_40:1 - - ht_cap_mask=0 - for cap in $(iw phy "$phy" info | grep 'Capabilities:' | cut -d: -f2); do - ht_cap_mask="$(($ht_cap_mask | $cap))" - done - - cap_rx_stbc=$((($ht_cap_mask >> 8) & 3)) - [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc" - ht_cap_mask="$(( ($ht_cap_mask & ~(0x300)) | ($cap_rx_stbc << 8) ))" - - mac80211_add_capabilities ht_capab_flags $ht_cap_mask \ - LDPC:0x1::$ldpc \ - GF:0x10::$greenfield \ - SHORT-GI-20:0x20::$short_gi_20 \ - SHORT-GI-40:0x40::$short_gi_40 \ - TX-STBC:0x80::$tx_stbc \ - RX-STBC1:0x300:0x100:1 \ - RX-STBC12:0x300:0x200:1 \ - RX-STBC123:0x300:0x300:1 \ - MAX-AMSDU-7935:0x800::$max_amsdu \ - DSSS_CCK-40:0x1000::$dsss_cck_40 - - ht_capab="$ht_capab$ht_capab_flags" - [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N" - } - - # 802.11ac - enable_ac=0 - vht_oper_chwidth=0 - vht_center_seg0= - - idx="$channel" - case "$htmode" in - VHT20|HE20) enable_ac=1;; - VHT40|HE40) - case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in - 1) idx=$(($channel + 2));; - 0) idx=$(($channel - 2));; - esac - enable_ac=1 - vht_center_seg0=$idx - ;; - VHT80|HE80) - case "$(( (($channel / 4) + $chan_ofs) % 4 ))" in - 1) idx=$(($channel + 6));; - 2) idx=$(($channel + 2));; - 3) idx=$(($channel - 2));; - 0) idx=$(($channel - 6));; - esac - enable_ac=1 - vht_oper_chwidth=1 - vht_center_seg0=$idx - ;; - VHT160|HE160) - if [ "$band" = "6g" ]; then - case "$channel" in - 1|5|9|13|17|21|25|29) idx=15;; - 33|37|41|45|49|53|57|61) idx=47;; - 65|69|73|77|81|85|89|93) idx=79;; - 97|101|105|109|113|117|121|125) idx=111;; - 129|133|137|141|145|149|153|157) idx=143;; - 161|165|169|173|177|181|185|189) idx=175;; - 193|197|201|205|209|213|217|221) idx=207;; - esac - else - case "$channel" in - 36|40|44|48|52|56|60|64) idx=50;; - 100|104|108|112|116|120|124|128) idx=114;; - esac - fi - enable_ac=1 - vht_oper_chwidth=2 - vht_center_seg0=$idx - ;; - esac - [ "$band" = "5g" ] && { - json_get_vars background_radar:0 - - [ "$background_radar" -eq 1 ] && append base_cfg "enable_background_radar=1" "$N" - } - [ "$band" = "6g" ] && { - op_class= - case "$htmode" in - HE20) op_class=131;; - HE*) op_class=$((132 + $vht_oper_chwidth)) - esac - [ -n "$op_class" ] && append base_cfg "op_class=$op_class" "$N" - } - [ "$hwmode" = "a" ] || enable_ac=0 - - if [ "$enable_ac" != "0" ]; then - json_get_vars \ - rxldpc:1 \ - short_gi_80:1 \ - short_gi_160:1 \ - tx_stbc_2by1:1 \ - su_beamformer:1 \ - su_beamformee:1 \ - mu_beamformer:1 \ - mu_beamformee:1 \ - vht_txop_ps:1 \ - htc_vht:1 \ - beamformee_antennas:4 \ - beamformer_antennas:4 \ - rx_antenna_pattern:1 \ - tx_antenna_pattern:1 \ - vht_max_a_mpdu_len_exp:7 \ - vht_max_mpdu:11454 \ - rx_stbc:4 \ - vht_link_adapt:3 \ - vht160:2 - - set_default tx_burst 2.0 - append base_cfg "ieee80211ac=1" "$N" - vht_cap=0 - for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do - vht_cap="$(($vht_cap | $cap))" - done - - append base_cfg "vht_oper_chwidth=$vht_oper_chwidth" "$N" - append base_cfg "vht_oper_centr_freq_seg0_idx=$vht_center_seg0" "$N" - - cap_rx_stbc=$((($vht_cap >> 8) & 7)) - [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc" - vht_cap="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))" - - [ "$vht_oper_chwidth" -lt 2 ] && { - vht160=0 - short_gi_160=0 - } - - mac80211_add_capabilities vht_capab $vht_cap \ - RXLDPC:0x10::$rxldpc \ - SHORT-GI-80:0x20::$short_gi_80 \ - SHORT-GI-160:0x40::$short_gi_160 \ - TX-STBC-2BY1:0x80::$tx_stbc_2by1 \ - SU-BEAMFORMER:0x800::$su_beamformer \ - SU-BEAMFORMEE:0x1000::$su_beamformee \ - MU-BEAMFORMER:0x80000::$mu_beamformer \ - MU-BEAMFORMEE:0x100000::$mu_beamformee \ - VHT-TXOP-PS:0x200000::$vht_txop_ps \ - HTC-VHT:0x400000::$htc_vht \ - RX-ANTENNA-PATTERN:0x10000000::$rx_antenna_pattern \ - TX-ANTENNA-PATTERN:0x20000000::$tx_antenna_pattern \ - RX-STBC-1:0x700:0x100:1 \ - RX-STBC-12:0x700:0x200:1 \ - RX-STBC-123:0x700:0x300:1 \ - RX-STBC-1234:0x700:0x400:1 \ - - [ "$(($vht_cap & 0x800))" -gt 0 -a "$su_beamformer" -gt 0 ] && { - cap_ant="$(( ( ($vht_cap >> 16) & 3 ) + 1 ))" - [ "$cap_ant" -gt "$beamformer_antennas" ] && cap_ant="$beamformer_antennas" - [ "$cap_ant" -gt 1 ] && vht_capab="$vht_capab[SOUNDING-DIMENSION-$cap_ant]" - } - - [ "$(($vht_cap & 0x1000))" -gt 0 -a "$su_beamformee" -gt 0 ] && { - cap_ant="$(( ( ($vht_cap >> 13) & 3 ) + 1 ))" - [ "$cap_ant" -gt "$beamformee_antennas" ] && cap_ant="$beamformee_antennas" - [ "$cap_ant" -gt 1 ] && vht_capab="$vht_capab[BF-ANTENNA-$cap_ant]" - } - - # supported Channel widths - vht160_hw=0 - [ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \ - vht160_hw=1 - [ "$(($vht_cap & 12))" -eq 8 -a 2 -le "$vht160" ] && \ - vht160_hw=2 - [ "$vht160_hw" = 1 ] && vht_capab="$vht_capab[VHT160]" - [ "$vht160_hw" = 2 ] && vht_capab="$vht_capab[VHT160-80PLUS80]" - - # maximum MPDU length - vht_max_mpdu_hw=3895 - [ "$(($vht_cap & 3))" -ge 1 -a 7991 -le "$vht_max_mpdu" ] && \ - vht_max_mpdu_hw=7991 - [ "$(($vht_cap & 3))" -ge 2 -a 11454 -le "$vht_max_mpdu" ] && \ - vht_max_mpdu_hw=11454 - [ "$vht_max_mpdu_hw" != 3895 ] && \ - vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]" - - # maximum A-MPDU length exponent - vht_max_a_mpdu_len_exp_hw=0 - [ "$(($vht_cap & 58720256))" -ge 8388608 -a 1 -le "$vht_max_a_mpdu_len_exp" ] && \ - vht_max_a_mpdu_len_exp_hw=1 - [ "$(($vht_cap & 58720256))" -ge 16777216 -a 2 -le "$vht_max_a_mpdu_len_exp" ] && \ - vht_max_a_mpdu_len_exp_hw=2 - [ "$(($vht_cap & 58720256))" -ge 25165824 -a 3 -le "$vht_max_a_mpdu_len_exp" ] && \ - vht_max_a_mpdu_len_exp_hw=3 - [ "$(($vht_cap & 58720256))" -ge 33554432 -a 4 -le "$vht_max_a_mpdu_len_exp" ] && \ - vht_max_a_mpdu_len_exp_hw=4 - [ "$(($vht_cap & 58720256))" -ge 41943040 -a 5 -le "$vht_max_a_mpdu_len_exp" ] && \ - vht_max_a_mpdu_len_exp_hw=5 - [ "$(($vht_cap & 58720256))" -ge 50331648 -a 6 -le "$vht_max_a_mpdu_len_exp" ] && \ - vht_max_a_mpdu_len_exp_hw=6 - [ "$(($vht_cap & 58720256))" -ge 58720256 -a 7 -le "$vht_max_a_mpdu_len_exp" ] && \ - vht_max_a_mpdu_len_exp_hw=7 - vht_capab="$vht_capab[MAX-A-MPDU-LEN-EXP$vht_max_a_mpdu_len_exp_hw]" - - # whether or not the STA supports link adaptation using VHT variant - vht_link_adapt_hw=0 - [ "$(($vht_cap & 201326592))" -ge 134217728 -a 2 -le "$vht_link_adapt" ] && \ - vht_link_adapt_hw=2 - [ "$(($vht_cap & 201326592))" -ge 201326592 -a 3 -le "$vht_link_adapt" ] && \ - vht_link_adapt_hw=3 - [ "$vht_link_adapt_hw" != 0 ] && \ - vht_capab="$vht_capab[VHT-LINK-ADAPT-$vht_link_adapt_hw]" - - [ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N" - fi - - # 802.11ax - enable_ax=0 - case "$htmode" in - HE*) enable_ax=1 ;; - esac - - if [ "$enable_ax" != "0" ]; then - json_get_vars \ - he_su_beamformer:1 \ - he_su_beamformee:1 \ - he_mu_beamformer:1 \ - he_twt_required:0 \ - he_spr_sr_control:3 \ - he_spr_psr_enabled:0 \ - he_spr_non_srg_obss_pd_max_offset:0 \ - he_bss_color:128 \ - he_bss_color_enabled:1 - - he_phy_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: AP/,$p' | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1) - he_phy_cap=${he_phy_cap:2} - he_mac_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: AP/,$p' | awk -F "[()]" '/HE MAC Capabilities/ { print $2 }' | head -1) - he_mac_cap=${he_mac_cap:2} - - append base_cfg "ieee80211ax=1" "$N" - [ "$hwmode" = "a" ] && { - append base_cfg "he_oper_chwidth=$vht_oper_chwidth" "$N" - append base_cfg "he_oper_centr_freq_seg0_idx=$vht_center_seg0" "$N" - } - - mac80211_add_he_capabilities \ - he_su_beamformer:${he_phy_cap:6:2}:0x80:$he_su_beamformer \ - he_su_beamformee:${he_phy_cap:8:2}:0x1:$he_su_beamformee \ - he_mu_beamformer:${he_phy_cap:8:2}:0x2:$he_mu_beamformer \ - he_spr_psr_enabled:${he_phy_cap:14:2}:0x1:$he_spr_psr_enabled \ - he_twt_required:${he_mac_cap:0:2}:0x6:$he_twt_required - - if [ "$he_bss_color_enabled" -gt 0 ]; then - append base_cfg "he_bss_color=$he_bss_color" "$N" - [ "$he_spr_non_srg_obss_pd_max_offset" -gt 0 ] && { \ - append base_cfg "he_spr_non_srg_obss_pd_max_offset=$he_spr_non_srg_obss_pd_max_offset" "$N" - he_spr_sr_control=$((he_spr_sr_control | (1 << 2))) - } - [ "$he_spr_psr_enabled" -gt 0 ] || he_spr_sr_control=$((he_spr_sr_control | (1 << 0))) - append base_cfg "he_spr_sr_control=$he_spr_sr_control" "$N" - else - append base_cfg "he_bss_color_disabled=1" "$N" - fi - - - append base_cfg "he_default_pe_duration=4" "$N" - append base_cfg "he_rts_threshold=1023" "$N" - append base_cfg "he_mu_edca_qos_info_param_count=0" "$N" - append base_cfg "he_mu_edca_qos_info_q_ack=0" "$N" - append base_cfg "he_mu_edca_qos_info_queue_request=0" "$N" - append base_cfg "he_mu_edca_qos_info_txop_request=0" "$N" - append base_cfg "he_mu_edca_ac_be_aifsn=8" "$N" - append base_cfg "he_mu_edca_ac_be_aci=0" "$N" - append base_cfg "he_mu_edca_ac_be_ecwmin=9" "$N" - append base_cfg "he_mu_edca_ac_be_ecwmax=10" "$N" - append base_cfg "he_mu_edca_ac_be_timer=255" "$N" - append base_cfg "he_mu_edca_ac_bk_aifsn=15" "$N" - append base_cfg "he_mu_edca_ac_bk_aci=1" "$N" - append base_cfg "he_mu_edca_ac_bk_ecwmin=9" "$N" - append base_cfg "he_mu_edca_ac_bk_ecwmax=10" "$N" - append base_cfg "he_mu_edca_ac_bk_timer=255" "$N" - append base_cfg "he_mu_edca_ac_vi_ecwmin=5" "$N" - append base_cfg "he_mu_edca_ac_vi_ecwmax=7" "$N" - append base_cfg "he_mu_edca_ac_vi_aifsn=5" "$N" - append base_cfg "he_mu_edca_ac_vi_aci=2" "$N" - append base_cfg "he_mu_edca_ac_vi_timer=255" "$N" - append base_cfg "he_mu_edca_ac_vo_aifsn=5" "$N" - append base_cfg "he_mu_edca_ac_vo_aci=3" "$N" - append base_cfg "he_mu_edca_ac_vo_ecwmin=5" "$N" - append base_cfg "he_mu_edca_ac_vo_ecwmax=7" "$N" - append base_cfg "he_mu_edca_ac_vo_timer=255" "$N" - fi - - hostapd_prepare_device_config "$hostapd_conf_file" nl80211 - cat >> "$hostapd_conf_file" <> /var/run/hostapd-$phy.conf </dev/null); do - grep -i -q "$macaddr" "/sys/class/ieee80211/${phy}/macaddress" && { - path="$(iwinfo nl80211 path "$phy")" - rename_board_phy_by_path "$path" - return 0 - } - done - } - return 1 -} - -mac80211_check_ap() { - has_ap=1 -} - -mac80211_set_ifname() { - local phy="$1" - local prefix="$2" - eval "ifname=\"$phy-$prefix\${idx_$prefix:-0}\"; idx_$prefix=\$((\${idx_$prefix:-0 } + 1))" -} - -mac80211_prepare_vif() { - json_select config - - json_get_vars ifname mode ssid wds powersave macaddr enable wpa_psk_file vlan_file - - [ -n "$ifname" ] || { - local prefix; - - case "$mode" in - ap|sta|mesh) prefix=$mode;; - adhoc) prefix=ibss;; - monitor) prefix=mon;; - esac - - mac80211_set_ifname "$phy" "$prefix" - } - - append active_ifnames "$ifname" - set_default wds 0 - set_default powersave 0 - json_add_string _ifname "$ifname" - - default_macaddr= - if [ -z "$macaddr" ]; then - macaddr="$(mac80211_generate_mac $phy)" - macidx="$(($macidx + 1))" - default_macaddr=1 - elif [ "$macaddr" = 'random' ]; then - macaddr="$(macaddr_random)" - fi - json_add_string _macaddr "$macaddr" - json_add_string _default_macaddr "$default_macaddr" - json_select .. - - - [ "$mode" == "ap" ] && { - [ -z "$wpa_psk_file" ] && hostapd_set_psk "$ifname" - [ -z "$vlan_file" ] && hostapd_set_vlan "$ifname" - } - - json_select config - - # It is far easier to delete and create the desired interface - case "$mode" in - ap) - # Hostapd will handle recreating the interface and - # subsequent virtual APs belonging to the same PHY - if [ -n "$hostapd_ctrl" ]; then - type=bss - else - type=interface - fi - - mac80211_hostapd_setup_bss "$phy" "$ifname" "$macaddr" "$type" || return - - [ -n "$hostapd_ctrl" ] || { - ap_ifname="${ifname}" - hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd/$ifname}" - } - ;; - esac - - json_select .. -} - -mac80211_prepare_iw_htmode() { - case "$htmode" in - VHT20|HT20|HE20) iw_htmode=HT20;; - HT40*|VHT40|VHT160|HE40) - case "$band" in - 2g) - case "$htmode" in - HT40+) iw_htmode="HT40+";; - HT40-) iw_htmode="HT40-";; - *) - if [ "$channel" -lt 7 ]; then - iw_htmode="HT40+" - else - iw_htmode="HT40-" - fi - ;; - esac - ;; - *) - case "$(( ($channel / 4) % 2 ))" in - 1) iw_htmode="HT40+" ;; - 0) iw_htmode="HT40-";; - esac - ;; - esac - [ "$auto_channel" -gt 0 ] && iw_htmode="HT40+" - ;; - VHT80|HE80) - iw_htmode="80MHZ" - ;; - NONE|NOHT) - iw_htmode="NOHT" - ;; - *) iw_htmode="" ;; - esac -} - -mac80211_add_mesh_params() { - for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do - eval "mp_val=\"\$$var\"" - [ -n "$mp_val" ] && json_add_string "$var" "$mp_val" - done -} - -mac80211_setup_adhoc() { - local enable=$1 - json_get_vars bssid ssid key mcast_rate - - NEWUMLIST="${NEWUMLIST}$ifname " - - [ "$enable" = 0 ] && { - ip link set dev "$ifname" down - return 0 - } - - keyspec= - [ "$auth_type" = "wep" ] && { - set_default key 1 - case "$key" in - [1234]) - local idx - for idx in 1 2 3 4; do - json_get_var ikey "key$idx" - - [ -n "$ikey" ] && { - ikey="$(($idx - 1)):$(prepare_key_wep "$ikey")" - [ $idx -eq $key ] && ikey="d:$ikey" - append keyspec "$ikey" - } - done - ;; - *) - append keyspec "d:0:$(prepare_key_wep "$key")" - ;; - esac - } - - brstr= - for br in $basic_rate_list; do - wpa_supplicant_add_rate brstr "$br" - done - - mcval= - [ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate" - - local prev - json_set_namespace wdev_uc prev - - json_add_object "$ifname" - json_add_string mode adhoc - [ -n "$default_macaddr" ] || json_add_string macaddr "$macaddr" - json_add_string ssid "$ssid" - json_add_string freq "$freq" - json_add_string htmode "$iw_htmode" - [ -n "$bssid" ] && json_add_string bssid "$bssid" - json_add_int beacon-interval "$beacon_int" - [ -n "$brstr" ] && json_add_string basic-rates "$brstr" - [ -n "$mcval" ] && json_add_string mcast-rate "$mcval" - [ -n "$keyspec" ] && json_add_string keys "$keyspec" - json_close_object - - json_set_namespace "$prev" -} - -mac80211_setup_mesh() { - json_get_vars ssid mesh_id mcast_rate - - mcval= - [ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate" - [ -n "$mesh_id" ] && ssid="$mesh_id" - - local prev - json_set_namespace wdev_uc prev - - json_add_object "$ifname" - json_add_string mode mesh - [ -n "$default_macaddr" ] || json_add_string macaddr "$macaddr" - json_add_string ssid "$ssid" - json_add_string freq "$freq" - json_add_string htmode "$iw_htmode" - [ -n "$mcval" ] && json_add_string mcast-rate "$mcval" - json_add_int beacon-interval "$beacon_int" - mac80211_add_mesh_params - - json_close_object - - json_set_namespace "$prev" -} - -mac80211_setup_monitor() { - local prev - json_set_namespace wdev_uc prev - - json_add_object "$ifname" - json_add_string mode monitor - [ -n "$freq" ] && json_add_string freq "$freq" - json_add_string htmode "$iw_htmode" - json_close_object - - json_set_namespace "$prev" -} - -mac80211_set_vif_txpower() { - local name="$1" - - json_select config - json_get_var ifname _ifname - json_get_vars vif_txpower - json_select .. - - [ -z "$vif_txpower" ] || iw dev "$ifname" set txpower fixed "${vif_txpower%%.*}00" -} - -wpa_supplicant_init_config() { - json_set_namespace wpa_supp prev - - json_init - json_add_array config - - json_set_namespace "$prev" -} - -wpa_supplicant_add_interface() { - local ifname="$1" - local mode="$2" - local prev - - _wpa_supplicant_common "$ifname" - - json_set_namespace wpa_supp prev - - json_add_object - json_add_string ctrl "$_rpath" - json_add_string iface "$ifname" - json_add_string mode "$mode" - json_add_string config "$_config" - [ -n "$default_macaddr" ] || json_add_string macaddr "$macaddr" - [ -n "$network_bridge" ] && json_add_string bridge "$network_bridge" - [ -n "$wds" ] && json_add_boolean 4addr "$wds" - json_add_boolean powersave "$powersave" - [ "$mode" = "mesh" ] && mac80211_add_mesh_params - json_close_object - - json_set_namespace "$prev" - - wpa_supp_init=1 -} - -wpa_supplicant_set_config() { - local phy="$1" - local prev - - json_set_namespace wpa_supp prev - json_close_array - json_add_string phy "$phy" - json_add_boolean defer 1 - local data="$(json_dump)" - - json_cleanup - json_set_namespace "$prev" - - ubus -S -t 0 wait_for wpa_supplicant || { - [ -n "$wpa_supp_init" ] || return 0 - - ubus wait_for wpa_supplicant - } - - local supplicant_res="$(ubus_call wpa_supplicant config_set "$data")" - ret="$?" - [ "$ret" != 0 -o -z "$supplicant_res" ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED - - wireless_add_process "$(jsonfilter -s "$supplicant_res" -l 1 -e @.pid)" "/usr/sbin/wpa_supplicant" 1 1 - -} - -hostapd_set_config() { - [ -n "$hostapd_ctrl" ] || { - ubus_call hostapd config_set '{ "phy": "'"$phy"'", "config": "", "prev_config": "'"${hostapd_conf_file}.prev"'" }' > /dev/null - return 0; - } - - ubus wait_for hostapd - local hostapd_res="$(ubus_call hostapd config_set "{ \"phy\": \"$phy\", \"config\":\"${hostapd_conf_file}\", \"prev_config\": \"${hostapd_conf_file}.prev\"}")" - ret="$?" - [ "$ret" != 0 -o -z "$hostapd_res" ] && { - wireless_setup_failed HOSTAPD_START_FAILED - return - } - wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1 -} - - -wpa_supplicant_start() { - local phy="$1" - - [ -n "$wpa_supp_init" ] || return 0 - - ubus_call wpa_supplicant config_set '{ "phy": "'"$phy"'" }' > /dev/null -} - -mac80211_setup_supplicant() { - local enable=$1 - local add_sp=0 - - wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1 - - if [ "$mode" = "sta" ]; then - wpa_supplicant_add_network "$ifname" - else - wpa_supplicant_add_network "$ifname" "$freq" "$htmode" "$hostapd_noscan" - fi - - wpa_supplicant_add_interface "$ifname" "$mode" - - return 0 -} - -mac80211_setup_vif() { - local name="$1" - local failed - - json_select config - json_get_var ifname _ifname - json_get_var macaddr _macaddr - json_get_var default_macaddr _default_macaddr - json_get_vars mode wds powersave - - set_default powersave 0 - set_default wds 0 - - case "$mode" in - mesh) - json_get_vars $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING - wireless_vif_parse_encryption - [ -z "$htmode" ] && htmode="NOHT"; - if wpa_supplicant -vmesh; then - mac80211_setup_supplicant || failed=1 - else - mac80211_setup_mesh - fi - ;; - adhoc) - wireless_vif_parse_encryption - if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then - mac80211_setup_supplicant || failed=1 - else - mac80211_setup_adhoc - fi - ;; - sta) - mac80211_setup_supplicant || failed=1 - ;; - monitor) - mac80211_setup_monitor - ;; - esac - - json_select .. - [ -n "$failed" ] || wireless_add_vif "$name" "$ifname" -} - -get_freq() { - local phy="$1" - local channel="$2" - local band="$3" - - case "$band" in - 2g) band="1:";; - 5g) band="2:";; - 60g) band="3:";; - 6g) band="4:";; - esac - - iw "$phy" info | awk -v band="$band" -v channel="[$channel]" ' - -$1 ~ /Band/ { - band_match = band == $2 -} - -band_match && $3 == "MHz" && $4 == channel { - print $2 - exit -} -' -} - -chan_is_dfs() { - local phy="$1" - local chan="$2" - iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep -q "MHz.*radar detection" - return $! -} - -mac80211_set_noscan() { - hostapd_noscan=1 -} - -drv_mac80211_cleanup() { - : -} - -mac80211_reset_config() { - local phy="$1" - - hostapd_conf_file="/var/run/hostapd-$phy.conf" - ubus_call hostapd config_set '{ "phy": "'"$phy"'", "config": "", "prev_config": "'"$hostapd_conf_file"'" }' > /dev/null - ubus_call wpa_supplicant config_set '{ "phy": "'"$phy"'", "config": [] }' > /dev/null - wdev_tool "$phy" set_config '{}' -} - -drv_mac80211_setup() { - json_select config - json_get_vars \ - phy macaddr path \ - country chanbw distance \ - txpower \ - rxantenna txantenna \ - frag rts beacon_int:100 htmode \ - num_global_macaddr:1 multiple_bssid - json_get_values basic_rate_list basic_rate - json_get_values scan_list scan_list - json_select .. - - json_select data && { - json_get_var prev_rxantenna rxantenna - json_get_var prev_txantenna txantenna - json_select .. - } - - find_phy || { - echo "Could not find PHY for device '$1'" - wireless_set_retry 0 - return 1 - } - - local wdev - local cwdev - local found - - # convert channel to frequency - [ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel" "$band")" - - [ -n "$country" ] && { - iw reg get | grep -q "^country $country:" || { - iw reg set "$country" - sleep 1 - } - } - - hostapd_conf_file="/var/run/hostapd-$phy.conf" - - macidx=0 - staidx=0 - - [ -n "$chanbw" ] && { - for file in /sys/kernel/debug/ieee80211/$phy/ath9k*/chanbw /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode; do - [ -f "$file" ] && echo "$chanbw" > "$file" - done - } - - set_default rxantenna 0xffffffff - set_default txantenna 0xffffffff - set_default distance 0 - - [ "$txantenna" = "all" ] && txantenna=0xffffffff - [ "$rxantenna" = "all" ] && rxantenna=0xffffffff - - [ "$rxantenna" = "$prev_rxantenna" -a "$txantenna" = "$prev_txantenna" ] || mac80211_reset_config "$phy" - wireless_set_data phy="$phy" txantenna="$txantenna" rxantenna="$rxantenna" - - iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1 - iw phy "$phy" set distance "$distance" >/dev/null 2>&1 - - if [ -n "$txpower" ]; then - iw phy "$phy" set txpower fixed "${txpower%%.*}00" - else - iw phy "$phy" set txpower auto - fi - - [ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}" - [ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}" - - has_ap= - hostapd_ctrl= - ap_ifname= - hostapd_noscan= - wpa_supp_init= - for_each_interface "ap" mac80211_check_ap - - [ -f "$hostapd_conf_file" ] && mv "$hostapd_conf_file" "$hostapd_conf_file.prev" - - for_each_interface "sta adhoc mesh" mac80211_set_noscan - [ -n "$has_ap" ] && mac80211_hostapd_setup_base "$phy" - - local prev - json_set_namespace wdev_uc prev - json_init - json_set_namespace "$prev" - - wpa_supplicant_init_config - - mac80211_prepare_iw_htmode - active_ifnames= - for_each_interface "ap sta adhoc mesh monitor" mac80211_prepare_vif - for_each_interface "ap sta adhoc mesh monitor" mac80211_setup_vif - - [ -x /usr/sbin/wpa_supplicant ] && wpa_supplicant_set_config "$phy" - [ -x /usr/sbin/hostapd ] && hostapd_set_config "$phy" - - [ -x /usr/sbin/wpa_supplicant ] && wpa_supplicant_start "$phy" - - json_set_namespace wdev_uc prev - wdev_tool "$phy" set_config "$(json_dump)" $active_ifnames - json_set_namespace "$prev" - - for_each_interface "ap sta adhoc mesh monitor" mac80211_set_vif_txpower - wireless_set_up -} - -_list_phy_interfaces() { - local phy="$1" - if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then - ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null; - else - ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g' - fi -} - -list_phy_interfaces() { - local phy="$1" - - for dev in $(_list_phy_interfaces "$phy"); do - readlink "/sys/class/net/${dev}/phy80211" | grep -q "/${phy}\$" || continue - echo "$dev" - done -} - -drv_mac80211_teardown() { - json_select data - json_get_vars phy - json_select .. - [ -n "$phy" ] || { - echo "Bug: PHY is undefined for device '$1'" - return 1 - } - - mac80211_reset_config "$phy" - - for wdev in $(list_phy_interfaces "$phy"); do - ip link set dev "$wdev" down - iw dev "$wdev" del - done -} - -add_driver mac80211 diff --git a/package/kernel/mac80211/files/lib/wifi/mac80211.sh b/package/kernel/mac80211/files/lib/wifi/mac80211.sh deleted file mode 100644 index e24a2a634e..0000000000 --- a/package/kernel/mac80211/files/lib/wifi/mac80211.sh +++ /dev/null @@ -1,217 +0,0 @@ -#!/bin/sh - -append DRIVERS "mac80211" - -check_mac80211_device() { - local device="$1" - local path="$2" - local macaddr="$3" - - [ -n "$found" ] && return 0 - - phy_path= - config_get phy "$device" phy - json_select wlan - [ -n "$phy" ] && case "$phy" in - phy*) - [ -d /sys/class/ieee80211/$phy ] && \ - phy_path="$(iwinfo nl80211 path "$dev")" - ;; - *) - if json_is_a "$phy" object; then - json_select "$phy" - json_get_var phy_path path - json_select .. - elif json_is_a "${phy%.*}" object; then - json_select "${phy%.*}" - json_get_var phy_path path - json_select .. - phy_path="$phy_path+${phy##*.}" - fi - ;; - esac - json_select .. - [ -n "$phy_path" ] || config_get phy_path "$device" path - [ -n "$path" -a "$phy_path" = "$path" ] && { - found=1 - return 0 - } - - config_get dev_macaddr "$device" macaddr - - [ -n "$macaddr" -a "$dev_macaddr" = "$macaddr" ] && found=1 - - return 0 -} - - -__get_band_defaults() { - local phy="$1" - - ( iw phy "$phy" info; echo ) | awk ' -BEGIN { - bands = "" -} - -($1 == "Band" || $1 == "") && band { - if (channel) { - mode="NOHT" - if (ht) mode="HT20" - if (vht && band != "1:") mode="VHT80" - if (he) mode="HE80" - if (he && band == "1:") mode="HE20" - sub("\\[", "", channel) - sub("\\]", "", channel) - bands = bands band channel ":" mode " " - } - band="" -} - -$1 == "Band" { - band = $2 - channel = "" - vht = "" - ht = "" - he = "" -} - -$0 ~ "Capabilities:" { - ht=1 -} - -$0 ~ "VHT Capabilities" { - vht=1 -} - -$0 ~ "HE Iftypes" { - he=1 -} - -$1 == "*" && $3 == "MHz" && $0 !~ /disabled/ && band && !channel { - channel = $4 -} - -END { - print bands -}' -} - -get_band_defaults() { - local phy="$1" - - for c in $(__get_band_defaults "$phy"); do - local band="${c%%:*}" - c="${c#*:}" - local chan="${c%%:*}" - c="${c#*:}" - local mode="${c%%:*}" - - case "$band" in - 1) band=2g;; - 2) band=5g;; - 3) band=60g;; - 4) band=6g;; - *) band="";; - esac - - [ -n "$band" ] || continue - [ -n "$mode_band" -a "$band" = "6g" ] && return - - mode_band="$band" - channel="$chan" - htmode="$mode" - done -} - -check_devidx() { - case "$1" in - radio[0-9]*) - local idx="${1#radio}" - [ "$devidx" -ge "${1#radio}" ] && devidx=$((idx + 1)) - ;; - esac -} - -check_board_phy() { - local name="$2" - - json_select "$name" - json_get_var phy_path path - json_select .. - - if [ "$path" = "$phy_path" ]; then - board_dev="$name" - elif [ "${path%+*}" = "$phy_path" ]; then - fallback_board_dev="$name.${path#*+}" - fi -} - -detect_mac80211() { - devidx=0 - config_load wireless - config_foreach check_devidx wifi-device - - json_load_file /etc/board.json - - for _dev in /sys/class/ieee80211/*; do - [ -e "$_dev" ] || continue - - dev="${_dev##*/}" - - mode_band="" - channel="" - htmode="" - ht_capab="" - - get_band_defaults "$dev" - - path="$(iwinfo nl80211 path "$dev")" - macaddr="$(cat /sys/class/ieee80211/${dev}/macaddress)" - - # work around phy rename related race condition - [ -n "$path" -o -n "$macaddr" ] || continue - - board_dev= - fallback_board_dev= - json_for_each_item check_board_phy wlan - [ -n "$board_dev" ] || board_dev="$fallback_board_dev" - [ -n "$board_dev" ] && dev="$board_dev" - - found= - config_foreach check_mac80211_device wifi-device "$path" "$macaddr" - [ -n "$found" ] && continue - - name="radio${devidx}" - devidx=$(($devidx + 1)) - case "$dev" in - phy*) - if [ -n "$path" ]; then - dev_id="set wireless.${name}.path='$path'" - else - dev_id="set wireless.${name}.macaddr='$macaddr'" - fi - ;; - *) - dev_id="set wireless.${name}.phy='$dev'" - ;; - esac - - uci -q batch <<-EOF - set wireless.${name}=wifi-device - set wireless.${name}.type=mac80211 - ${dev_id} - set wireless.${name}.channel=${channel} - set wireless.${name}.band=${mode_band} - set wireless.${name}.htmode=$htmode - set wireless.${name}.disabled=1 - - set wireless.default_${name}=wifi-iface - set wireless.default_${name}.device=${name} - set wireless.default_${name}.network=lan - set wireless.default_${name}.mode=ap - set wireless.default_${name}.ssid=OpenWrt - set wireless.default_${name}.encryption=none -EOF - uci -q commit wireless - done -} diff --git a/package/kernel/mac80211/files/mac80211.hotplug b/package/kernel/mac80211/files/mac80211.hotplug deleted file mode 100644 index b865552661..0000000000 --- a/package/kernel/mac80211/files/mac80211.hotplug +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh - -[ "${ACTION}" = "add" ] && { - /sbin/wifi config -} diff --git a/package/network/config/netifd/Makefile b/package/network/config/netifd/Makefile index 558463e8ea..ba4516c1dc 100644 --- a/package/network/config/netifd/Makefile +++ b/package/network/config/netifd/Makefile @@ -43,7 +43,10 @@ define Package/netifd/install $(INSTALL_BIN) $(PKG_BUILD_DIR)/netifd $(1)/sbin/ $(CP) ./files/* $(1)/ $(INSTALL_DIR) $(1)/etc/udhcpc.user.d/ - $(CP) $(PKG_BUILD_DIR)/scripts/* $(1)/lib/netifd/ + $(CP) \ + $(PKG_BUILD_DIR)/scripts/utils.sh \ + $(PKG_BUILD_DIR)/scripts/netifd-proto.sh \ + $(1)/lib/netifd/ endef $(eval $(call BuildPackage,netifd)) diff --git a/package/network/config/wifi-scripts/Makefile b/package/network/config/wifi-scripts/Makefile new file mode 100644 index 0000000000..e57f97fef5 --- /dev/null +++ b/package/network/config/wifi-scripts/Makefile @@ -0,0 +1,45 @@ +# +# Copyright (C) 2024 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=wifi-scripts +PKG_VERSION:=1.0 +PKG_RELEASE:=1 +PKG_LICENSE:=GPL-2.0 + +PKG_MAINTAINER:=Felix Fietkau + +include $(INCLUDE_DIR)/package.mk + +define Package/wifi-scripts + SECTION:=utils + CATEGORY:=Base system + DEPENDS:=+netifd +ucode +ucode-mod-nl80211 +ucode-mod-ubus + TITLE:=Wi-Fi configuration scripts + PKGARCH:=all +endef + +define Package/qos-scripts/description + A set of scripts that handle setup and configuration of Wi-Fi devices. +endef + +define Build/Prepare +endef + +define Build/Configure +endef + +define Build/Compile +endef + +define Package/wifi-scripts/install + $(INSTALL_DIR) $(1) + $(CP) ./files/* $(1)/ +endef + +$(eval $(call BuildPackage,wifi-scripts)) diff --git a/package/network/config/wifi-scripts/files/etc/hotplug.d/ieee80211/10-wifi-detect b/package/network/config/wifi-scripts/files/etc/hotplug.d/ieee80211/10-wifi-detect new file mode 100644 index 0000000000..b865552661 --- /dev/null +++ b/package/network/config/wifi-scripts/files/etc/hotplug.d/ieee80211/10-wifi-detect @@ -0,0 +1,5 @@ +#!/bin/sh + +[ "${ACTION}" = "add" ] && { + /sbin/wifi config +} diff --git a/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh b/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh new file mode 100644 index 0000000000..1a664abbf2 --- /dev/null +++ b/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh @@ -0,0 +1,1598 @@ +. /lib/functions/network.sh +. /lib/functions.sh + +wpa_supplicant_add_rate() { + local var="$1" + local val="$(($2 / 1000))" + local sub="$((($2 / 100) % 10))" + append $var "$val" "," + [ $sub -gt 0 ] && append $var "." +} + +hostapd_add_rate() { + local var="$1" + local val="$(($2 / 100))" + append $var "$val" " " +} + +hostapd_append_wep_key() { + local var="$1" + + wep_keyidx=0 + set_default key 1 + case "$key" in + [1234]) + for idx in 1 2 3 4; do + local zidx + zidx="$(($idx - 1))" + json_get_var ckey "key${idx}" + [ -n "$ckey" ] && \ + append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T" + done + wep_keyidx="$((key - 1))" + ;; + *) + append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T" + ;; + esac +} + +hostapd_append_wpa_key_mgmt() { + local auth_type_l="$(echo $auth_type | tr 'a-z' 'A-Z')" + + case "$auth_type" in + psk|eap) + append wpa_key_mgmt "WPA-$auth_type_l" + [ "${wpa:-2}" -ge 2 ] && [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type_l}" + [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256" + ;; + eap192) + append wpa_key_mgmt "WPA-EAP-SUITE-B-192" + [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP-SHA384" + ;; + eap-eap2) + append wpa_key_mgmt "WPA-EAP" + append wpa_key_mgmt "WPA-EAP-SHA256" + [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP" + ;; + eap2) + [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP" + append wpa_key_mgmt "WPA-EAP-SHA256" + ;; + sae) + append wpa_key_mgmt "SAE" + [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE" + ;; + psk-sae) + append wpa_key_mgmt "WPA-PSK" + [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK" + [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-PSK-SHA256" + append wpa_key_mgmt "SAE" + [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE" + ;; + owe) + append wpa_key_mgmt "OWE" + ;; + esac + + [ "$fils" -gt 0 ] && { + case "$auth_type" in + eap-192) + append wpa_key_mgmt FILS-SHA384 + [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt FT-FILS-SHA384 + ;; + eap*) + append wpa_key_mgmt FILS-SHA256 + [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt FT-FILS-SHA256 + ;; + esac + } + + [ "$auth_osen" = "1" ] && append wpa_key_mgmt "OSEN" +} + +hostapd_add_log_config() { + config_add_boolean \ + log_80211 \ + log_8021x \ + log_radius \ + log_wpa \ + log_driver \ + log_iapp \ + log_mlme + + config_add_int log_level +} + +hostapd_common_add_device_config() { + config_add_array basic_rate + config_add_array supported_rates + config_add_string beacon_rate + + config_add_string country country3 + config_add_boolean country_ie doth + config_add_boolean spectrum_mgmt_required + config_add_int local_pwr_constraint + config_add_string require_mode + config_add_boolean legacy_rates + config_add_int cell_density + config_add_int rts_threshold + config_add_int rssi_reject_assoc_rssi + config_add_int rssi_ignore_probe_request + config_add_int maxassoc + + config_add_string acs_chan_bias + config_add_array hostapd_options + + config_add_int airtime_mode + config_add_int mbssid + + hostapd_add_log_config +} + +hostapd_prepare_device_config() { + local config="$1" + local driver="$2" + + local base_cfg= + + json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \ + acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \ + rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \ + mbssid:0 + + hostapd_set_log_options base_cfg + + set_default country_ie 1 + set_default spectrum_mgmt_required 0 + set_default doth 1 + set_default legacy_rates 0 + set_default airtime_mode 0 + set_default cell_density 0 + + [ -n "$country" ] && { + append base_cfg "country_code=$country" "$N" + [ -n "$country3" ] && append base_cfg "country3=$country3" "$N" + + [ "$country_ie" -gt 0 ] && { + append base_cfg "ieee80211d=1" "$N" + [ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N" + [ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N" + } + [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N" + } + + [ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N" + + local brlist= br + json_get_values basic_rate_list basic_rate + local rlist= r + json_get_values rate_list supported_rates + + [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N" + if [ "$hwmode" = "g" ] || [ "$hwmode" = "a" ]; then + [ -n "$require_mode" ] && legacy_rates=0 + case "$require_mode" in + n) append base_cfg "require_ht=1" "$N";; + ac) append base_cfg "require_vht=1" "$N";; + esac + fi + case "$hwmode" in + b) + if [ "$cell_density" -eq 1 ]; then + set_default rate_list "5500 11000" + set_default basic_rate_list "5500 11000" + elif [ "$cell_density" -ge 2 ]; then + set_default rate_list "11000" + set_default basic_rate_list "11000" + fi + ;; + g) + if [ "$cell_density" -eq 0 ] || [ "$cell_density" -eq 1 ]; then + if [ "$legacy_rates" -eq 0 ]; then + set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000" + set_default basic_rate_list "6000 12000 24000" + elif [ "$cell_density" -eq 1 ]; then + set_default rate_list "5500 6000 9000 11000 12000 18000 24000 36000 48000 54000" + set_default basic_rate_list "5500 11000" + fi + elif [ "$cell_density" -ge 3 ] && [ "$legacy_rates" -ne 0 ] || [ "$cell_density" -eq 2 ]; then + if [ "$legacy_rates" -eq 0 ]; then + set_default rate_list "12000 18000 24000 36000 48000 54000" + set_default basic_rate_list "12000 24000" + else + set_default rate_list "11000 12000 18000 24000 36000 48000 54000" + set_default basic_rate_list "11000" + fi + elif [ "$cell_density" -ge 3 ]; then + set_default rate_list "24000 36000 48000 54000" + set_default basic_rate_list "24000" + fi + ;; + a) + if [ "$cell_density" -eq 1 ]; then + set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000" + set_default basic_rate_list "6000 12000 24000" + elif [ "$cell_density" -eq 2 ]; then + set_default rate_list "12000 18000 24000 36000 48000 54000" + set_default basic_rate_list "12000 24000" + elif [ "$cell_density" -ge 3 ]; then + set_default rate_list "24000 36000 48000 54000" + set_default basic_rate_list "24000" + fi + ;; + esac + + for r in $rate_list; do + hostapd_add_rate rlist "$r" + done + + for br in $basic_rate_list; do + hostapd_add_rate brlist "$br" + done + + [ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N" + [ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N" + [ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N" + [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N" + [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N" + append base_cfg "beacon_int=$beacon_int" "$N" + [ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N" + [ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N" + [ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N" + [ "$mbssid" -gt 0 ] && [ "$mbssid" -le 2 ] && append base_cfg "mbssid=$mbssid" "$N" + + json_get_values opts hostapd_options + for val in $opts; do + append base_cfg "$val" "$N" + done + + cat > "$config" <