From: Leonard Crestez Date: Fri, 20 Jul 2018 12:47:43 +0000 (+0300) Subject: reset: imx7: Fix always writing bits as 0 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=26fce0557fa639fb7bbc33e31a57cff7df25c3a0;p=openwrt%2Fstaging%2Fblogic.git reset: imx7: Fix always writing bits as 0 Right now the only user of reset-imx7 is pci-imx6 and the reset_control_assert and deassert calls on pciephy_reset don't toggle the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing 1 or 0 respectively. The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for other registers like MIPIPHY and HSICPHY the bits are explicitly documented as "1 means assert, 0 means deassert". The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN. Signed-off-by: Leonard Crestez Reviewed-by: Lucas Stach Signed-off-by: Philipp Zabel --- diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c index 4db177bc89bc..fdeac1946429 100644 --- a/drivers/reset/reset-imx7.c +++ b/drivers/reset/reset-imx7.c @@ -80,7 +80,7 @@ static int imx7_reset_set(struct reset_controller_dev *rcdev, { struct imx7_src *imx7src = to_imx7_src(rcdev); const struct imx7_src_signal *signal = &imx7_src_signals[id]; - unsigned int value = 0; + unsigned int value = assert ? signal->bit : 0; switch (id) { case IMX7_RESET_PCIEPHY: