From: Felix Fietkau Date: Tue, 14 Jun 2016 09:27:20 +0000 (+0200) Subject: ar71xx: enable flow control for ethernet MACs with built-in switch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=26b8db253745b0591bfffa21f02323428f11a88f;p=openwrt%2Fstaging%2Fkaloz.git ar71xx: enable flow control for ethernet MACs with built-in switch Should fix LAN speed issues on some devices. This is an updated version of the previously reverted commit with the same name. It improves the check for MACs connected to a built-in switch Signed-off-by: Felix Fietkau --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c index 17dd3ac6b1..7d641d4f09 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c @@ -907,6 +907,7 @@ void __init ath79_register_eth(unsigned int id) pdata->speed = SPEED_1000; pdata->duplex = DUPLEX_FULL; pdata->switch_data = &ath79_switch_data; + pdata->builtin_switch = 1; ath79_switch_data.phy_poll_mask |= BIT(4); } @@ -951,6 +952,7 @@ void __init ath79_register_eth(unsigned int id) pdata->has_gbit = 1; pdata->duplex = DUPLEX_FULL; pdata->switch_data = &ath79_switch_data; + pdata->builtin_switch = 1; ath79_switch_data.phy_poll_mask |= BIT(4); } @@ -979,6 +981,7 @@ void __init ath79_register_eth(unsigned int id) pdata->set_speed = ath79_set_speed_dummy; pdata->switch_data = &ath79_switch_data; + pdata->builtin_switch = 1; /* reset the built-in switch */ ath79_device_reset_set(AR934X_RESET_ETH_SWITCH); @@ -1015,6 +1018,7 @@ void __init ath79_register_eth(unsigned int id) pdata->speed = SPEED_1000; pdata->duplex = DUPLEX_FULL; pdata->switch_data = &ath79_switch_data; + pdata->builtin_switch = 1; ath79_switch_data.phy_poll_mask |= BIT(4); } @@ -1040,6 +1044,7 @@ void __init ath79_register_eth(unsigned int id) pdata->reset_bit = QCA955X_RESET_GE1_MAC | QCA955X_RESET_GE1_MDIO; pdata->set_speed = qca955x_set_speed_sgmii; + pdata->builtin_switch = 1; } pdata->has_gbit = 1; @@ -1083,6 +1088,7 @@ void __init ath79_register_eth(unsigned int id) pdata->speed = SPEED_1000; pdata->duplex = DUPLEX_FULL; + pdata->builtin_switch = 1; /* reset the built-in switch */ ath79_device_reset_set(AR934X_RESET_ETH_SWITCH); diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h index d46dc4e317..e494cdfc0f 100644 --- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h +++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h @@ -36,6 +36,7 @@ struct ag71xx_platform_data { u8 is_ar7240:1; u8 is_ar724x:1; u8 has_ar8216:1; + u8 builtin_switch:1; struct ag71xx_switch_platform_data *switch_data; diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c index 38226cf22e..d7c27393a6 100644 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c @@ -453,9 +453,12 @@ static void ag71xx_hw_stop(struct ag71xx *ag) static void ag71xx_hw_setup(struct ag71xx *ag) { struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + u32 init = MAC_CFG1_INIT; /* setup MAC configuration registers */ - ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT); + if (pdata->builtin_switch) + init |= MAC_CFG1_TFC | MAC_CFG1_RFC; + ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, init); ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);