From: Gabor Juhos Date: Sun, 13 Jul 2014 19:44:00 +0000 (+0000) Subject: ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=26b39cc580150ec8d677f9f16498f63b81cd0197;p=openwrt%2Fstaging%2Fstintel.git ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards Signed-off-by: Gabor Juhos SVN-Revision: 41627 --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c index dc5034114f..01719eb5b5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c @@ -182,23 +182,6 @@ static struct mdio_board_info archer_c7_mdio0_info[] = { }, }; -static void __init archer_c7_gmac_setup(void) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); - - t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); - t |= QCA955X_ETH_CFG_RGMII_EN; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - static void __init common_setup(bool pcie_slot) { u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); @@ -227,7 +210,7 @@ static void __init common_setup(bool pcie_slot) ARRAY_SIZE(archer_c7_mdio0_info)); ath79_register_mdio(0, 0x0); - archer_c7_gmac_setup(); + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); /* GMAC0 is connected to the RMGII interface */ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c index 5b8c3d0109..e102f2c8af 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c @@ -187,23 +187,6 @@ static void nbg6716_get_mac(const char *name, char *mac) pr_err("no MAC address found for %s\n", name); } -static void __init nbg6716_gmac_setup(void) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); - - t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); - t |= QCA955X_ETH_CFG_RGMII_EN; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - static void __init nbg6716_common_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1f050000); @@ -228,7 +211,7 @@ static void __init nbg6716_common_setup(void) ath79_register_wmac(art + NBG6716_WMAC_CALDATA_OFFSET, tmpmac); - nbg6716_gmac_setup(); + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); ath79_register_mdio(0, 0x0); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c index b70c586025..4f873e2f74 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c @@ -164,23 +164,6 @@ static struct mdio_board_info wr1043nd_v2_mdio0_info[] = { }, }; -static void __init wr1043nd_v2_gmac_setup(void) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); - - t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); - t |= QCA955X_ETH_CFG_RGMII_EN; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - static void __init tl_wr1043nd_v2_setup(void) { u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); @@ -202,7 +185,7 @@ static void __init tl_wr1043nd_v2_setup(void) ARRAY_SIZE(wr1043nd_v2_mdio0_info)); ath79_register_mdio(0, 0x0); - wr1043nd_v2_gmac_setup(); + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); /* GMAC0 is connected to the RMGII interface */ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c index 8eecc0e6b4..88022e7533 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c @@ -136,23 +136,6 @@ static struct mdio_board_info wlr8100_mdio0_info[] = { }, }; -static void __init wlr8100_gmac_setup(void) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); - - t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); - t |= QCA955X_ETH_CFG_RGMII_EN; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - static void __init wlr8100_common_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); @@ -169,7 +152,7 @@ static void __init wlr8100_common_setup(void) ath79_register_wmac(art + WLR8100_WMAC_CALDATA_OFFSET, NULL); - wlr8100_gmac_setup(); + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); ath79_register_mdio(0, 0x0); diff --git a/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch index 4b530a7b5a..43097124cd 100644 --- a/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch +++ b/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch @@ -86,7 +86,7 @@ .gpio = AP136_GPIO_LED_USB, .active_low = 1, } -@@ -98,65 +106,169 @@ static struct gpio_keys_button ap136_gpi +@@ -98,65 +106,152 @@ static struct gpio_keys_button ap136_gpi }, }; @@ -134,66 +134,30 @@ - .bus_num = 0, - .num_chipselect = 1, -}; -+static void __init ap136_gmac_setup(void) -+{ -+ void __iomem *base; -+ u32 t; - --#ifdef CONFIG_PCI --static struct ath9k_platform_data ap136_ath9k_data; -+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - --static int ap136_pci_plat_dev_init(struct pci_dev *dev) --{ -- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) -- dev->dev.platform_data = &ap136_ath9k_data; -+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); - -- return 0; --} -+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); -+ t |= QCA955X_ETH_CFG_RGMII_EN; - --static void __init ap136_pci_init(u8 *eeprom) --{ -- memcpy(ap136_ath9k_data.eeprom_data, eeprom, -- sizeof(ap136_ath9k_data.eeprom_data)); -+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - -- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); -- ath79_register_pci(); -+ iounmap(base); - } --#else --static inline void ap136_pci_init(void) {} --#endif /* CONFIG_PCI */ - --static void __init ap136_setup(void) +static void __init ap136_common_setup(void) - { - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ + ath79_register_m25p80(NULL); + - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), - ap136_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap136_gpio_keys), - ap136_gpio_keys); -- ath79_register_spi(&ap136_spi_data, ap136_spi_info, -- ARRAY_SIZE(ap136_spi_info)); ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), ++ ap136_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap136_gpio_keys), ++ ap136_gpio_keys); + - ath79_register_usb(); -- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); -- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); ++ ath79_register_usb(); + ath79_register_nfc(); + + ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL); + -+ ap136_gmac_setup(); -+ ++ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ap136_ath9k_data; + ath79_register_mdio(0, 0x0); -+ + +-static int ap136_pci_plat_dev_init(struct pci_dev *dev) + ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0); + + mdiobus_register_board_info(ap136_mdio0_info, @@ -215,9 +179,12 @@ +} + +static void __init ap136_010_setup(void) -+{ + { +- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) +- dev->dev.platform_data = &ap136_ath9k_data; + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ + +- return 0; + /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */ + ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; + ap136_ar8327_pad0_cfg.txclk_delay_en = true; @@ -237,13 +204,15 @@ + ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); } - MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", - "Atheros AP136-010 reference board", -- ap136_setup); +-static void __init ap136_pci_init(u8 *eeprom) ++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", ++ "Atheros AP136-010 reference board", + ap136_010_setup); + +static void __init ap136_020_common_setup(void) -+{ + { +- memcpy(ap136_ath9k_data.eeprom_data, eeprom, +- sizeof(ap136_ath9k_data.eeprom_data)); + /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ + ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; + ap136_ar8327_pad0_cfg.sgmii_delay_en = true; @@ -254,21 +223,40 @@ + ap136_ar8327_pad6_cfg.rxclk_delay_en = true; + ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; + ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; -+ + +- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); +- ath79_register_pci(); + ath79_eth0_pll_data.pll_1000 = 0x56000000; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + ap136_common_setup(); -+} -+ + } +-#else +-static inline void ap136_pci_init(void) {} +-#endif /* CONFIG_PCI */ + +-static void __init ap136_setup(void) +static void __init ap136_020_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ + { + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + +- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), +- ap136_leds_gpio); +- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(ap136_gpio_keys), +- ap136_gpio_keys); +- ath79_register_spi(&ap136_spi_data, ap136_spi_info, +- ARRAY_SIZE(ap136_spi_info)); +- ath79_register_usb(); +- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); +- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); + ap136_020_common_setup(); + ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); -+} -+ + } + +-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", +- "Atheros AP136-010 reference board", +- ap136_setup); +MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020", + "Atheros AP136-020 reference board", + ap136_020_setup);