From: Amber Lin Date: Wed, 29 Aug 2018 17:39:16 +0000 (-0500) Subject: drm/amdgpu: Relocate some definitions v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2690262ec9fea3aa364ca9cd31981d7fe3888a5b;p=openwrt%2Fstaging%2Fblogic.git drm/amdgpu: Relocate some definitions v2 Move some KFD-related (but used in amdgpu_drv.c) definitions from kfd_priv.h to kgd_kfd_interface.h so we don't need to include kfd_priv.h in amdgpu_drv.c. This fixes a build failure when AMDGPU is enabled but MMU_NOTIFIER is not. This patch also disables KFD-related module options when HSA_AMD is not enabled. v2: rebase (Alex) Signed-off-by: Amber Lin Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 82e6b6746511..d7d9a9d32381 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -39,7 +39,6 @@ #include "amdgpu_gem.h" #include "amdgpu_amdkfd.h" -#include "kfd_priv.h" /* * KMS wrapper. @@ -128,16 +127,6 @@ int amdgpu_compute_multipipe = -1; int amdgpu_gpu_recovery = -1; /* auto */ int amdgpu_emu_mode = 0; uint amdgpu_smu_memory_pool_size = 0; -/* KFD parameters */ -int sched_policy = KFD_SCHED_POLICY_HWS; -int hws_max_conc_proc = 8; -int cwsr_enable = 1; -int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT; -int send_sigterm; -int debug_largebar; -int ignore_crat; -int noretry; -int halt_if_hws_hang; /** * DOC: vramlimit (int) @@ -543,12 +532,14 @@ MODULE_PARM_DESC(smu_memory_pool_size, "0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte"); module_param_named(smu_memory_pool_size, amdgpu_smu_memory_pool_size, uint, 0444); +#ifdef CONFIG_HSA_AMD /** * DOC: sched_policy (int) * Set scheduling policy. Default is HWS(hardware scheduling) with over-subscription. * Setting 1 disables over-subscription. Setting 2 disables HWS and statically * assigns queues to HQDs. */ +int sched_policy = KFD_SCHED_POLICY_HWS; module_param(sched_policy, int, 0444); MODULE_PARM_DESC(sched_policy, "Scheduling policy (0 = HWS (Default), 1 = HWS without over-subscription, 2 = Non-HWS (Used for debugging only)"); @@ -558,6 +549,7 @@ MODULE_PARM_DESC(sched_policy, * Maximum number of processes that HWS can schedule concurrently. The maximum is the * number of VMIDs assigned to the HWS, which is also the default. */ +int hws_max_conc_proc = 8; module_param(hws_max_conc_proc, int, 0444); MODULE_PARM_DESC(hws_max_conc_proc, "Max # processes HWS can execute concurrently when sched_policy=0 (0 = no concurrency, #VMIDs for KFD = Maximum(default))"); @@ -568,6 +560,7 @@ MODULE_PARM_DESC(hws_max_conc_proc, * the middle of a compute wave. Default is 1 to enable this feature. Setting 0 * disables it. */ +int cwsr_enable = 1; module_param(cwsr_enable, int, 0444); MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))"); @@ -576,6 +569,7 @@ MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))"); * Maximum number of queues per device. Valid setting is between 1 and 4096. Default * is 4096. */ +int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT; module_param(max_num_of_queues_per_device, int, 0444); MODULE_PARM_DESC(max_num_of_queues_per_device, "Maximum number of supported queues per device (1 = Minimum, 4096 = default)"); @@ -585,6 +579,7 @@ MODULE_PARM_DESC(max_num_of_queues_per_device, * Send sigterm to HSA process on unhandled exceptions. Default is not to send sigterm * but just print errors on dmesg. Setting 1 enables sending sigterm. */ +int send_sigterm; module_param(send_sigterm, int, 0444); MODULE_PARM_DESC(send_sigterm, "Send sigterm to HSA process on unhandled exception (0 = disable, 1 = enable)"); @@ -596,6 +591,7 @@ MODULE_PARM_DESC(send_sigterm, * size, usually 256MB. * Default value is 0, diabled. */ +int debug_largebar; module_param(debug_largebar, int, 0444); MODULE_PARM_DESC(debug_largebar, "Debug large-bar flag used to simulate large-bar capability on non-large bar machine (0 = disable, 1 = enable)"); @@ -606,6 +602,7 @@ MODULE_PARM_DESC(debug_largebar, * table to get information about AMD APUs. This option can serve as a workaround on * systems with a broken CRAT table. */ +int ignore_crat; module_param(ignore_crat, int, 0444); MODULE_PARM_DESC(ignore_crat, "Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)"); @@ -616,6 +613,7 @@ MODULE_PARM_DESC(ignore_crat, * Setting 1 disables retry. * Retry is needed for recoverable page faults. */ +int noretry; module_param(noretry, int, 0644); MODULE_PARM_DESC(noretry, "Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)"); @@ -625,8 +623,10 @@ MODULE_PARM_DESC(noretry, * Halt if HWS hang is detected. Default value, 0, disables the halt on hang. * Setting 1 enables halt on hang. */ +int halt_if_hws_hang; module_param(halt_if_hws_hang, int, 0644); MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (default), 1 = on)"); +#endif static const struct pci_device_id pciidlist[] = { #ifdef CONFIG_DRM_AMDGPU_SI diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index f971710f1c91..355f79da8a63 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -103,7 +103,6 @@ */ extern int max_num_of_queues_per_device; -#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT 4096 #define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE \ (KFD_MAX_NUM_OF_PROCESSES * \ KFD_MAX_NUM_OF_QUEUES_PER_PROCESS) @@ -149,33 +148,6 @@ extern int noretry; */ extern int halt_if_hws_hang; -/** - * enum kfd_sched_policy - * - * @KFD_SCHED_POLICY_HWS: H/W scheduling policy known as command processor (cp) - * scheduling. In this scheduling mode we're using the firmware code to - * schedule the user mode queues and kernel queues such as HIQ and DIQ. - * the HIQ queue is used as a special queue that dispatches the configuration - * to the cp and the user mode queues list that are currently running. - * the DIQ queue is a debugging queue that dispatches debugging commands to the - * firmware. - * in this scheduling mode user mode queues over subscription feature is - * enabled. - * - * @KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION: The same as above but the over - * subscription feature disabled. - * - * @KFD_SCHED_POLICY_NO_HWS: no H/W scheduling policy is a mode which directly - * set the command processor registers and sets the queues "manually". This - * mode is used *ONLY* for debugging proposes. - * - */ -enum kfd_sched_policy { - KFD_SCHED_POLICY_HWS = 0, - KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION, - KFD_SCHED_POLICY_NO_HWS -}; - enum cache_policy { cache_policy_coherent, cache_policy_noncoherent diff --git a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h index 814576f6ca1c..31c52c116e20 100644 --- a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h +++ b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h @@ -98,6 +98,33 @@ enum kgd_engine_type { KGD_ENGINE_MAX }; +/** + * enum kfd_sched_policy + * + * @KFD_SCHED_POLICY_HWS: H/W scheduling policy known as command processor (cp) + * scheduling. In this scheduling mode we're using the firmware code to + * schedule the user mode queues and kernel queues such as HIQ and DIQ. + * the HIQ queue is used as a special queue that dispatches the configuration + * to the cp and the user mode queues list that are currently running. + * the DIQ queue is a debugging queue that dispatches debugging commands to the + * firmware. + * in this scheduling mode user mode queues over subscription feature is + * enabled. + * + * @KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION: The same as above but the over + * subscription feature disabled. + * + * @KFD_SCHED_POLICY_NO_HWS: no H/W scheduling policy is a mode which directly + * set the command processor registers and sets the queues "manually". This + * mode is used *ONLY* for debugging proposes. + * + */ +enum kfd_sched_policy { + KFD_SCHED_POLICY_HWS = 0, + KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION, + KFD_SCHED_POLICY_NO_HWS +}; + struct kgd2kfd_shared_resources { /* Bit n == 1 means VMID n is available for KFD. */ unsigned int compute_vmid_bitmap; @@ -153,6 +180,7 @@ struct tile_config { uint32_t num_ranks; }; +#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT 4096 /* * Allocation flag domains