From: Gerry Rozema Date: Thu, 17 Aug 2006 07:43:43 +0000 (+0000) Subject: Add a readme to the lilo package explaining how to make a bootable usb stick X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2688b4a11a1a4bbc47cc8899d444fb6504466c59;p=openwrt%2Fsvn-archive%2Farchive.git Add a readme to the lilo package explaining how to make a bootable usb stick SVN-Revision: 4583 --- diff --git a/utils/lilo/README b/utils/lilo/README new file mode 100755 index 0000000000..de3bf954d2 --- /dev/null +++ b/utils/lilo/README @@ -0,0 +1,36 @@ +Using this package to create a bootable usb stick for openwrt. + +The status of this package is currently 'it works for me', and it will +require more effort before it's generic across the board. Currently +only tested to be working on x86-2.4, there are some issues with devfs +that need to be addressed yet in 2.6 before this will be clean with +x86-2.6. My development environment for this is a via epia with a +serial console (no monitors or keyboards attached). + +To create the images that are bootable, configure your buildroot to include +the lilo package in the image, as well as e2fsprogs. Have it create an +ext2 file system as the target file system. Let it build the works. + +When the build is finished, you will need to run the script 'mkbootable' +located in the lilo package directory, it requires root privileges to +loop mount the fs for installing lilo. When it's done, you have an +8 meg ext2fs root file system ready to run. + +To use the image, dd it directly onto a usb stick. It should go onto +/dev/sda not /dev/sda1, it's assuming the stick is not partitioned. +When you boot the stick, you will get a lilo menu on the serial terminal. +The two options allow you to boot with the stick itself as the root file +system, or, to boot into a ramdisk, and not mount the stick at all. The +stick will likely show up at /dev/discs/disc0/disc + +Boot the unit, and select the ramdisk. Once up in the ramdisk, you can +use the e2fstools to expand the image to fill the stick and add a journal +to use it as ext3. + +e2fsck -f /dev/discs/disc0/disc +tune2fs -j /dev/discs/disc0/disc +resize2fs /dev/discs/disc0/disc + +Reboot the box, and, have fun with openwrt on your x86 using the usb +stick to boot and run from. +