From: John Crispin Date: Sat, 13 Dec 2014 08:07:03 +0000 (+0000) Subject: ramips:Add support for Aigale Ai-BR100 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=263070a2e72dbb85ed16d286a22fc3ce422580e5;p=openwrt%2Fstaging%2Fyousong.git ramips:Add support for Aigale Ai-BR100 Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 SVN-Revision: 43681 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index bd8c779660..9c49c5cda5 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -27,6 +27,10 @@ case $board in 3g300m) set_usb_led "tenda:blue:3g" ;; + ai-br100) + ucidef_set_led_netdev "wan" "wan" "aigale:blue:wan" "eth0.2" + set_wifi_led "aigale:blue:wlan" + ;; a5-v11) ucidef_set_led_default "power" "POWER" "a5-v11:red:power" "1" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index b519cfdd3c..80b5449e05 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -110,6 +110,7 @@ ramips_setup_interfaces() ;; 3g-6200n | \ + ai-br100 | \ dir-610-a1 | \ dir-300-b7 | \ dir-320-b1 | \ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index dfa5468205..f50ae1fe7f 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -12,6 +12,9 @@ get_status_led() { 3g300m | w150m) status_led="tenda:blue:ap" ;; + ai-br100) + status_led="aigale:blue:wlan" + ;; ar670w) status_led="ar670w:green:power" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index ff5044c615..b4e5d91e86 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -28,6 +28,9 @@ ramips_board_detect() { *"A5-V11") name="a5-v11" ;; + *"Aigale Ai-BR100") + name="ai-br100" + ;; *"Airlink101 AR670W") name="ar670w" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 4962b8b4d0..991d3b556e 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -19,6 +19,7 @@ platform_check_image() { 3g300m | \ a5-v11 | \ air3gii | \ + ai-br100 |\ all0239-3g | \ all0256n | \ all5002 | \ diff --git a/target/linux/ramips/dts/AIBR100.dts b/target/linux/ramips/dts/AIBR100.dts new file mode 100644 index 0000000000..90f3a1eada --- /dev/null +++ b/target/linux/ramips/dts/AIBR100.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "AIBR100", "ralink,mt7620a-soc"; + model = "Aigale Ai-BR100"; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25q64"; + reg = <0 0>; + linux,modalias = "m25p80", "en25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x20000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x7c0000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wan { + label = "aigale:blue:wan"; + gpios = <&gpio2 4 1>; + }; + wlan { + label = "aigale:blue:wlan"; + gpios = <&gpio3 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index e0eb8c2d29..c5478ceaa6 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -770,6 +770,8 @@ Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7 Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e) Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530) Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG) +br100_mtd_size=8126464 +Image/Build/Profile/AIBR100=$(call BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AIBR100,$(br100_mtd_size),Ai-BR) Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53) whr_300hp2_mtd_size=7012352 Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size)) @@ -799,6 +801,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/MT7620a_MT7610e,$(1)) $(call Image/Build/Profile/MT7620a_MT7530,$(1)) $(call Image/Build/Profile/MT7620a_V22SG,$(1)) + $(call Image/Build/Profile/AIBR100,$(1)) $(call Image/Build/Profile/RP-N53,$(1)) $(call Image/Build/Profile/DIR-810L,$(1)) $(call Image/Build/Profile/WHR300HP2,$(1)) diff --git a/target/linux/ramips/mt7620/profiles/aigale.mk b/target/linux/ramips/mt7620/profiles/aigale.mk new file mode 100644 index 0000000000..475aac9562 --- /dev/null +++ b/target/linux/ramips/mt7620/profiles/aigale.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2014 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/AIBR100 + NAME:=Aigale Ai-BR100 + PACKAGES:=kmod-usb-ohci kmod-usb2 +endef + +define Profile/AIBR100/Description + Default package set for Aigale Ai-BR100. +endef +$(eval $(call Profile,AIBR100))