From: Rob Herring <robh@kernel.org>
Date: Thu, 10 Dec 2015 21:21:12 +0000 (-0600)
Subject: arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=262c45d43f425c7907a4c9857e7f37c82234a3be;p=openwrt%2Fstaging%2Fblogic.git

arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI

Add label properties to provide a way to identify UART, I2C and SPI
ports based on their connector names. This follows naming convention in
96boards CE spec. Ports without external connections are not labelled.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Andy Gross <agross@codeaurora.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
---

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 7505fa385ceb..14fafa1e9c7c 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -28,6 +28,7 @@
 
 	soc {
 		serial@78af000 {
+			label = "LS-UART0";
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp1_uart1_default>;
@@ -35,6 +36,7 @@
 		};
 
 		serial@78b0000 {
+			label = "LS-UART1";
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp1_uart2_default>;
@@ -43,26 +45,31 @@
 
 		i2c@78b6000 {
 		/* On Low speed expansion */
+			label = "LS-I2C0";
 			status = "okay";
 		};
 
 		i2c@78b8000 {
 		/* On High speed expansion */
+			label = "HS-I2C2";
 			status = "okay";
 		};
 
 		i2c@78ba000 {
 		/* On Low speed expansion */
+			label = "LS-I2C1";
 			status = "okay";
 		};
 
 		spi@78b7000 {
 		/* On High speed expansion */
+			label = "HS-SPI1";
 			status = "okay";
 		};
 
 		spi@78b9000 {
 		/* On Low speed expansion */
+			label = "LS-SPI0";
 			status = "okay";
 		};