From: Philip Rakity Date: Sun, 7 Nov 2010 21:22:28 +0000 (-0500) Subject: mmc: Fix printing of card DDR type X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=25d5c699f983a2da51f5165eb9a8fc6338124b6c;p=openwrt%2Fstaging%2Fblogic.git mmc: Fix printing of card DDR type We should not call mmc_card_set_ddr_mode() if we are in single data mode. This sets DDR and causes the kernel log to say the card is DDR when it is not. Explicitly set ddr to 0 rather then rely on MMC_SDR_MODE being 0 when doing the checks. Signed-off-by: Philip Rakity Acked-by: Linus Walleij Acked-by: Kyungmin Park Signed-off-by: Chris Ball --- diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 995261f7fd70..77f93c3b8808 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *oldcard) { struct mmc_card *card; - int err, ddr = MMC_SDR_MODE; + int err, ddr = 0; u32 cid[4]; unsigned int max_dtr; @@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, 1 << bus_width, ddr); err = 0; } else { - mmc_card_set_ddr_mode(card); + if (ddr) + mmc_card_set_ddr_mode(card); + else + ddr = MMC_SDR_MODE; + mmc_set_bus_width_ddr(card->host, bus_width, ddr); } }