From: Hauke Mehrtens Date: Sun, 24 Sep 2017 22:32:21 +0000 (+0200) Subject: sunxi: H3: add device tree changes for H3 Ethernet X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=25abd71efbc41c6839d2c617f10015423091cb65;p=openwrt%2Fstaging%2Fluka.git sunxi: H3: add device tree changes for H3 Ethernet This adds the device tree changes needed to make the GMAC stmmac driver working for the Allwinner H3 SoCs. Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/sunxi/patches-4.9/0070-arm-sun8i-sunxi-h3-h5-Add-dt-node-for-the-syscon-con.patch b/target/linux/sunxi/patches-4.9/0070-arm-sun8i-sunxi-h3-h5-Add-dt-node-for-the-syscon-con.patch new file mode 100644 index 0000000000..88d431d319 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0070-arm-sun8i-sunxi-h3-h5-Add-dt-node-for-the-syscon-con.patch @@ -0,0 +1,32 @@ +From d91d3daf5de90e0118227d8ddcb7bb4ff40c1b91 Mon Sep 17 00:00:00 2001 +From: Corentin Labbe +Date: Wed, 31 May 2017 09:18:37 +0200 +Subject: arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module + +This patch add the dt node for the syscon register present on the +Allwinner H3/H5 + +Only two register are present in this syscon and the only one useful is +the one dedicated to EMAC clock.. + +Signed-off-by: Corentin Labbe +Signed-off-by: Maxime Ripard +--- + arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/arch/arm/boot/dts/sun8i-h3.dtsi ++++ b/arch/arm/boot/dts/sun8i-h3.dtsi +@@ -140,6 +140,12 @@ + #size-cells = <1>; + ranges; + ++ syscon: syscon@1c00000 { ++ compatible = "allwinner,sun8i-h3-system-controller", ++ "syscon"; ++ reg = <0x01c00000 0x1000>; ++ }; ++ + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-h3-dma"; + reg = <0x01c02000 0x1000>; diff --git a/target/linux/sunxi/patches-4.9/0071-arm-sun8i-sunxi-h3-h5-add-dwmac-sun8i-ethernet-drive.patch b/target/linux/sunxi/patches-4.9/0071-arm-sun8i-sunxi-h3-h5-add-dwmac-sun8i-ethernet-drive.patch new file mode 100644 index 0000000000..7054e3dc0f --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0071-arm-sun8i-sunxi-h3-h5-add-dwmac-sun8i-ethernet-drive.patch @@ -0,0 +1,67 @@ +From 0eba511a3cac29d6338b22b5b727f40cf8d163df Mon Sep 17 00:00:00 2001 +From: Corentin Labbe +Date: Wed, 31 May 2017 09:18:38 +0200 +Subject: arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver + +The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 +speed. + +This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree. +SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set. + +Signed-off-by: Corentin Labbe +Signed-off-by: Maxime Ripard +--- + arch/arm/boot/dts/sunxi-h3-h5.dtsi | 34 ++++++++++++++++++++++++++++++++++ + 1 file changed, 34 insertions(+) + +--- a/arch/arm/boot/dts/sun8i-h3.dtsi ++++ b/arch/arm/boot/dts/sun8i-h3.dtsi +@@ -333,6 +333,14 @@ + interrupt-controller; + #interrupt-cells = <3>; + ++ emac_rgmii_pins: emac0 { ++ pins = "PD0", "PD1", "PD2", "PD3", "PD4", ++ "PD5", "PD7", "PD8", "PD9", "PD10", ++ "PD12", "PD13", "PD15", "PD16", "PD17"; ++ function = "emac"; ++ drive-strength = <40>; ++ }; ++ + i2c0_pins: i2c0 { + allwinner,pins = "PA11", "PA12"; + allwinner,function = "i2c0"; +@@ -431,6 +439,32 @@ + clocks = <&osc24M>; + }; + ++ emac: ethernet@1c30000 { ++ compatible = "allwinner,sun8i-h3-emac"; ++ syscon = <&syscon>; ++ reg = <0x01c30000 0x104>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ resets = <&ccu RST_BUS_EMAC>; ++ reset-names = "stmmaceth"; ++ clocks = <&ccu CLK_BUS_EMAC>; ++ clock-names = "stmmaceth"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ ++ mdio: mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ int_mii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ clocks = <&ccu CLK_BUS_EPHY>; ++ resets = <&ccu RST_BUS_EPHY>; ++ }; ++ }; ++ }; ++ + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; diff --git a/target/linux/sunxi/patches-4.9/0072-arm-sun8i-orangepi-2-Enable-dwmac-sun8i.patch b/target/linux/sunxi/patches-4.9/0072-arm-sun8i-orangepi-2-Enable-dwmac-sun8i.patch new file mode 100644 index 0000000000..450d5bc2be --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0072-arm-sun8i-orangepi-2-Enable-dwmac-sun8i.patch @@ -0,0 +1,40 @@ +From a9992f2dd1890112643a93d621ff5a4c97c55d53 Mon Sep 17 00:00:00 2001 +From: Corentin Labbe +Date: Wed, 31 May 2017 09:18:42 +0200 +Subject: arm: sun8i: orangepi-2: Enable dwmac-sun8i + +The dwmac-sun8i hardware is present on the Orange PI 2. +It uses the internal PHY. + +This patch create the needed emac node. + +Signed-off-by: Corentin Labbe +Signed-off-by: Maxime Ripard +--- + arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts ++++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +@@ -55,6 +55,7 @@ + aliases { + serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ ++ ethernet0 = &emac; + ethernet1 = &rtl8189; + }; + +@@ -109,6 +110,13 @@ + status = "okay"; + }; + ++&emac { ++ phy-handle = <&int_mii_phy>; ++ phy-mode = "mii"; ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ + &ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; diff --git a/target/linux/sunxi/patches-4.9/0073-ARM-sun8i-orangepi-plus-Enable-dwmac-sun8i.patch b/target/linux/sunxi/patches-4.9/0073-ARM-sun8i-orangepi-plus-Enable-dwmac-sun8i.patch new file mode 100644 index 0000000000..375d119d55 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0073-ARM-sun8i-orangepi-plus-Enable-dwmac-sun8i.patch @@ -0,0 +1,64 @@ +From 1dcd0095019aca7533eaeed9475d995a4eb30137 Mon Sep 17 00:00:00 2001 +From: Corentin Labbe +Date: Mon, 5 Jun 2017 21:21:26 +0200 +Subject: ARM: sun8i: orangepi-plus: Enable dwmac-sun8i + +The dwmac-sun8i hardware is present on the Orange PI plus. +It uses an external PHY rtl8211e via RGMII. + +This patch create the needed regulator, emac and phy nodes. + +Signed-off-by: Corentin Labbe +Signed-off-by: Maxime Ripard +--- + arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 32 ++++++++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts ++++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +@@ -47,6 +47,20 @@ + model = "Xunlong Orange Pi Plus / Plus 2"; + compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; + ++ aliases { ++ ethernet0 = &emac; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; ++ }; ++ + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; +@@ -64,6 +78,24 @@ + status = "okay"; + }; + ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <0>; ++ }; ++}; ++ + &mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; diff --git a/target/linux/sunxi/patches-4.9/0074-ARM-dts-sunxi-h3-h5-Correct-emac-register-size.patch b/target/linux/sunxi/patches-4.9/0074-ARM-dts-sunxi-h3-h5-Correct-emac-register-size.patch new file mode 100644 index 0000000000..50877a5301 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0074-ARM-dts-sunxi-h3-h5-Correct-emac-register-size.patch @@ -0,0 +1,26 @@ +From 072b6e3692532b6281bf781ded1c7a986ac17471 Mon Sep 17 00:00:00 2001 +From: Corentin Labbe +Date: Thu, 6 Jul 2017 10:53:34 +0200 +Subject: ARM: dts: sunxi: h3/h5: Correct emac register size + +The datasheet said that emac register size is 0x10000 not 0x104 + +Signed-off-by: Corentin Labbe +Signed-off-by: Maxime Ripard +[wens@csie.org: Fixed commit subject prefix] +Signed-off-by: Chen-Yu Tsai +--- + arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/sun8i-h3.dtsi ++++ b/arch/arm/boot/dts/sun8i-h3.dtsi +@@ -442,7 +442,7 @@ + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; +- reg = <0x01c30000 0x104>; ++ reg = <0x01c30000 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>;