From: Christian Marangi Date: Thu, 16 Jun 2022 20:17:19 +0000 (+0200) Subject: ipq806x: 5.15: add new version of cache cpu scaling driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=25aa65304c43de8327b20342d7eb13e5532c8e88;p=openwrt%2Fstaging%2Fmans0n.git ipq806x: 5.15: add new version of cache cpu scaling driver Use a new implementation by using a devfreq driver to scale the shared cache of the krait cpu cores. Signed-off-by: Christian Marangi --- diff --git a/target/linux/ipq806x/patches-5.15/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch b/target/linux/ipq806x/patches-5.15/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch deleted file mode 100644 index 19c3d096c4..0000000000 --- a/target/linux/ipq806x/patches-5.15/093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch +++ /dev/null @@ -1,51 +0,0 @@ -From a206d4061f1cc2c5cd17ee45c53a0ba711e48e6d Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sun, 7 Feb 2021 16:42:52 +0100 -Subject: [PATCH 3/3] drivers: cpufreq: qcom-cpufreq-nvmem: support specific - cpufreq driver - -Add support for specific cpufreq driver for qcom-cpufreq-nvmem driver. - -Signed-off-by: Ansuel Smith ---- - drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c -+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c -@@ -52,6 +52,7 @@ struct qcom_cpufreq_match_data { - char **pvs_name, - struct qcom_cpufreq_drv *drv); - const char **genpd_names; -+ const char *cpufreq_driver; - }; - - struct qcom_cpufreq_drv { -@@ -250,6 +251,7 @@ static const struct qcom_cpufreq_match_d - - static const struct qcom_cpufreq_match_data match_data_krait = { - .get_version = qcom_cpufreq_krait_name_version, -+ .cpufreq_driver = "krait-cpufreq", - }; - - static const char *qcs404_genpd_names[] = { "cpr", NULL }; -@@ -385,6 +387,19 @@ static int qcom_cpufreq_probe(struct pla - } - } - -+ if (drv->data->cpufreq_driver) { -+ cpufreq_dt_pdev = platform_device_register_simple( -+ drv->data->cpufreq_driver, -1, NULL, 0); -+ if (!IS_ERR(cpufreq_dt_pdev)) { -+ platform_set_drvdata(pdev, drv); -+ return 0; -+ } else { -+ dev_err(cpu_dev, -+ "Failed to register dedicated %s cpufreq\n", -+ drv->data->cpufreq_driver); -+ } -+ } -+ - cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, - NULL, 0); - if (!IS_ERR(cpufreq_dt_pdev)) { diff --git a/target/linux/ipq806x/patches-5.15/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch b/target/linux/ipq806x/patches-5.15/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch deleted file mode 100644 index a3896f2fc2..0000000000 --- a/target/linux/ipq806x/patches-5.15/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch +++ /dev/null @@ -1,713 +0,0 @@ -From cc41a266280cad0b55319e614167c88dff344248 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 22 Feb 2020 16:33:10 +0100 -Subject: [PATCH 1/8] cpufreq: add Krait dedicated scaling driver - -This new driver is based on generic cpufreq-dt driver. -Krait SoCs have 2-4 cpu and one shared L2 cache that can -operate at different frequency based on the maximum cpu clk -across all core. -L2 frequency and voltage are scaled on every frequency change -if needed. On Krait SoCs is present a bug that can cause -transition problem between frequency bin, to workaround this -on more than one transition, the L2 frequency is first set to the -base rate and then to the target rate. -The L2 frequency use the OPP framework and use the opp-level -bindings to link the l2 freq to different cpu freq. This is needed -as the Krait l2 clk are note mapped 1:1 to the core clks and some -of the l2 clk is set based on a range of the cpu clks. If the driver -find a broken config (for example no opp-level set) the l2 scaling is -skipped. - -Signed-off-by: Ansuel Smith ---- - drivers/cpufreq/Kconfig.arm | 14 +- - drivers/cpufreq/Makefile | 2 + - drivers/cpufreq/qcom-cpufreq-krait.c | 589 +++++++++++++++++++++++++++ - 3 files changed, 604 insertions(+), 1 deletion(-) - create mode 100644 drivers/cpufreq/qcom-cpufreq-krait.c - ---- a/drivers/cpufreq/Kconfig.arm -+++ b/drivers/cpufreq/Kconfig.arm -@@ -172,6 +172,18 @@ config ARM_QCOM_CPUFREQ_HW - The driver implements the cpufreq interface for this HW engine. - Say Y if you want to support CPUFreq HW. - -+config ARM_QCOM_CPUFREQ_KRAIT -+ tristate "CPU Frequency scaling support for Krait SoCs" -+ depends on ARCH_QCOM || COMPILE_TEST -+ select PM_OPP -+ select ARM_QCOM_CPUFREQ_NVMEM -+ help -+ This adds the CPUFreq driver for Qualcomm Krait SoC based boards. -+ This scale the cache clk and regulator based on the different cpu -+ clks when scaling the different cores clk. -+ -+ If in doubt, say N. -+ - config ARM_RASPBERRYPI_CPUFREQ - tristate "Raspberry Pi cpufreq support" - depends on CLK_RASPBERRYPI || COMPILE_TEST -@@ -356,4 +368,4 @@ config ARM_PXA2xx_CPUFREQ - help - This add the CPUFreq driver support for Intel PXA2xx SOCs. - -- If in doubt, say N. -+ If in doubt, say N. -\ No newline at end of file ---- a/drivers/cpufreq/Makefile -+++ b/drivers/cpufreq/Makefile -@@ -63,6 +63,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2 - obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o - obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o - obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o -+obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRAIT) += qcom-cpufreq-krait.o - obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o - obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o - obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o -@@ -85,6 +86,7 @@ obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += te - obj-$(CONFIG_ARM_TEGRA194_CPUFREQ) += tegra194-cpufreq.o - obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o - obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o -+obj-$(CONFIG_ARM_KRAIT_CPUFREQ) += krait-cpufreq.o - - - ################################################################################## ---- /dev/null -+++ b/drivers/cpufreq/qcom-cpufreq-krait.c -@@ -0,0 +1,635 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "cpufreq-dt.h" -+ -+static struct device *l2_dev; -+static struct mutex lock; -+ -+struct private_data { -+ struct opp_table *opp_table; -+ struct device *cpu_dev; -+ struct device *l2_dev; -+ const char *reg_name; -+ bool have_static_opps; -+}; -+ -+static int set_target(struct cpufreq_policy *policy, unsigned int index) -+{ -+ struct private_data *priv = policy->driver_data; -+ unsigned long freq = policy->freq_table[index].frequency; -+ unsigned long target_freq = freq * 1000; -+ struct dev_pm_opp *opp; -+ unsigned int level; -+ int cpu, ret; -+ -+ if (l2_dev) { -+ int policy_cpu = policy->cpu; -+ -+ mutex_lock(&lock); -+ -+ /* find the max freq across all core */ -+ for_each_present_cpu(cpu) -+ if (cpu != policy_cpu) -+ target_freq = max( -+ target_freq, -+ (unsigned long)cpufreq_quick_get(cpu)); -+ -+ opp = dev_pm_opp_find_freq_exact(priv->cpu_dev, target_freq, -+ true); -+ if (IS_ERR(opp)) { -+ dev_err(l2_dev, "failed to find OPP for %ld\n", -+ target_freq); -+ ret = PTR_ERR(opp); -+ goto l2_scale_fail; -+ } -+ level = dev_pm_opp_get_level(opp); -+ dev_pm_opp_put(opp); -+ -+ /* -+ * Hardware constraint: -+ * Krait CPU cannot operate at 384MHz with L2 at 1Ghz. -+ * Assume index 0 with the idle freq and level > 0 as -+ * any L2 freq > 384MHz. -+ * Skip CPU freq change in this corner case. -+ */ -+ if (unlikely(index == 0 && level != 0)) { -+ dev_err(priv->cpu_dev, "Krait CPU can't operate at idle freq with L2 at 1GHz"); -+ ret = -EINVAL; -+ goto l2_scale_fail; -+ } -+ -+ opp = dev_pm_opp_find_level_exact(l2_dev, level); -+ if (IS_ERR(opp)) { -+ dev_err(l2_dev, -+ "failed to find level OPP for %d\n", level); -+ ret = PTR_ERR(opp); -+ goto l2_scale_fail; -+ } -+ target_freq = dev_pm_opp_get_freq(opp); -+ dev_pm_opp_put(opp); -+ -+ ret = dev_pm_opp_set_rate(l2_dev, target_freq); -+ if (ret) -+ goto l2_scale_fail; -+ -+ mutex_unlock(&lock); -+ } -+ -+ ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); -+ if (ret) -+ return ret; -+ -+ arch_set_freq_scale(policy->related_cpus, freq, -+ policy->cpuinfo.max_freq); -+ -+ return 0; -+l2_scale_fail: -+ mutex_unlock(&lock); -+ -+ return ret; -+} -+ -+/* -+ * An earlier version of opp-v1 bindings used to name the regulator -+ * "cpu0-supply", we still need to handle that for backwards compatibility. -+ */ -+static const char *find_supply_name(struct device *dev) -+{ -+ struct device_node *np; -+ struct property *pp; -+ int cpu = dev->id; -+ const char *name = NULL; -+ -+ np = of_node_get(dev->of_node); -+ -+ /* This must be valid for sure */ -+ if (WARN_ON(!np)) -+ return NULL; -+ -+ /* Try "cpu0" for older DTs */ -+ if (!cpu) { -+ pp = of_find_property(np, "cpu0-supply", NULL); -+ if (pp) { -+ name = "cpu0"; -+ goto node_put; -+ } -+ } -+ -+ pp = of_find_property(np, "cpu-supply", NULL); -+ if (pp) { -+ name = "cpu"; -+ goto node_put; -+ } -+ -+ dev_dbg(dev, "no regulator for cpu%d\n", cpu); -+node_put: -+ of_node_put(np); -+ return name; -+} -+ -+static int resources_available(void) -+{ -+ struct device *cpu_dev; -+ struct regulator *cpu_reg; -+ struct clk *cpu_clk; -+ int ret = 0; -+ const char *name; -+ -+ cpu_dev = get_cpu_device(0); -+ if (!cpu_dev) { -+ pr_err("failed to get cpu0 device\n"); -+ return -ENODEV; -+ } -+ -+ cpu_clk = clk_get(cpu_dev, NULL); -+ ret = PTR_ERR_OR_ZERO(cpu_clk); -+ if (ret) { -+ /* -+ * If cpu's clk node is present, but clock is not yet -+ * registered, we should try defering probe. -+ */ -+ if (ret == -EPROBE_DEFER) -+ dev_dbg(cpu_dev, "clock not ready, retry\n"); -+ else -+ dev_err(cpu_dev, "failed to get clock: %d\n", ret); -+ -+ return ret; -+ } -+ -+ clk_put(cpu_clk); -+ -+ name = find_supply_name(cpu_dev); -+ /* Platform doesn't require regulator */ -+ if (!name) -+ return 0; -+ -+ cpu_reg = regulator_get_optional(cpu_dev, name); -+ ret = PTR_ERR_OR_ZERO(cpu_reg); -+ if (ret) { -+ /* -+ * If cpu's regulator supply node is present, but regulator is -+ * not yet registered, we should try defering probe. -+ */ -+ if (ret == -EPROBE_DEFER) -+ dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n"); -+ else -+ dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret); -+ -+ return ret; -+ } -+ -+ regulator_put(cpu_reg); -+ return 0; -+} -+ -+static int cpufreq_init(struct cpufreq_policy *policy) -+{ -+ struct cpufreq_frequency_table *freq_table; -+ struct opp_table *opp_table = NULL; -+ unsigned int transition_latency; -+ struct private_data *priv; -+ struct device *cpu_dev; -+ bool fallback = false; -+ struct clk *cpu_clk; -+ const char *name; -+ int ret; -+ -+ cpu_dev = get_cpu_device(policy->cpu); -+ if (!cpu_dev) { -+ pr_err("failed to get cpu%d device\n", policy->cpu); -+ return -ENODEV; -+ } -+ -+ cpu_clk = clk_get(cpu_dev, NULL); -+ if (IS_ERR(cpu_clk)) { -+ ret = PTR_ERR(cpu_clk); -+ dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret); -+ return ret; -+ } -+ -+ /* Get OPP-sharing information from "operating-points-v2" bindings */ -+ ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus); -+ if (ret) { -+ if (ret != -ENOENT) -+ goto out_put_clk; -+ -+ /* -+ * operating-points-v2 not supported, fallback to old method of -+ * finding shared-OPPs for backward compatibility if the -+ * platform hasn't set sharing CPUs. -+ */ -+ if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus)) -+ fallback = true; -+ } -+ -+ /* -+ * OPP layer will be taking care of regulators now, but it needs to know -+ * the name of the regulator first. -+ */ -+ name = find_supply_name(cpu_dev); -+ if (name) { -+ opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1); -+ if (IS_ERR(opp_table)) { -+ ret = PTR_ERR(opp_table); -+ dev_err(cpu_dev, -+ "Failed to set regulator for cpu%d: %d\n", -+ policy->cpu, ret); -+ goto out_put_clk; -+ } -+ } -+ -+ priv = kzalloc(sizeof(*priv), GFP_KERNEL); -+ if (!priv) { -+ ret = -ENOMEM; -+ goto out_put_regulator; -+ } -+ -+ priv->reg_name = name; -+ priv->opp_table = opp_table; -+ -+ /* -+ * Initialize OPP tables for all policy->cpus. They will be shared by -+ * all CPUs which have marked their CPUs shared with OPP bindings. -+ * -+ * For platforms not using operating-points-v2 bindings, we do this -+ * before updating policy->cpus. Otherwise, we will end up creating -+ * duplicate OPPs for policy->cpus. -+ * -+ * OPPs might be populated at runtime, don't check for error here -+ */ -+ if (!dev_pm_opp_of_cpumask_add_table(policy->cpus)) -+ priv->have_static_opps = true; -+ -+ /* -+ * But we need OPP table to function so if it is not there let's -+ * give platform code chance to provide it for us. -+ */ -+ ret = dev_pm_opp_get_opp_count(cpu_dev); -+ if (ret < 0) { -+ dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n"); -+ ret = -EPROBE_DEFER; -+ goto out_free_opp; -+ } -+ -+ if (fallback) { -+ cpumask_setall(policy->cpus); -+ -+ /* -+ * OPP tables are initialized only for policy->cpu, do it for -+ * others as well. -+ */ -+ ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); -+ if (ret) -+ dev_err(cpu_dev, -+ "%s: failed to mark OPPs as shared: %d\n", -+ __func__, ret); -+ } -+ -+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); -+ if (ret) { -+ dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); -+ goto out_free_opp; -+ } -+ -+ priv->cpu_dev = cpu_dev; -+ -+ policy->driver_data = priv; -+ policy->clk = cpu_clk; -+ policy->freq_table = freq_table; -+ -+ policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; -+ -+ transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev); -+ if (!transition_latency) -+ transition_latency = CPUFREQ_ETERNAL; -+ -+ policy->cpuinfo.transition_latency = transition_latency; -+ policy->dvfs_possible_from_any_cpu = true; -+ -+ dev_pm_opp_of_register_em(cpu_dev, policy->cpus); -+ -+ return 0; -+ -+out_free_opp: -+ if (priv->have_static_opps) -+ dev_pm_opp_of_cpumask_remove_table(policy->cpus); -+ kfree(priv); -+out_put_regulator: -+ if (name) -+ dev_pm_opp_put_regulators(opp_table); -+out_put_clk: -+ clk_put(cpu_clk); -+ -+ return ret; -+} -+ -+static int cpufreq_online(struct cpufreq_policy *policy) -+{ -+ /* We did light-weight tear down earlier, nothing to do here */ -+ return 0; -+} -+ -+static int cpufreq_offline(struct cpufreq_policy *policy) -+{ -+ /* -+ * Preserve policy->driver_data and don't free resources on light-weight -+ * tear down. -+ */ -+ return 0; -+} -+ -+static int cpufreq_exit(struct cpufreq_policy *policy) -+{ -+ struct private_data *priv = policy->driver_data; -+ -+ dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); -+ if (priv->have_static_opps) -+ dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); -+ if (priv->reg_name) -+ dev_pm_opp_put_regulators(priv->opp_table); -+ -+ clk_put(policy->clk); -+ kfree(priv); -+ -+ return 0; -+} -+ -+static struct freq_attr *krait_cpufreq_attr[] = { -+ &cpufreq_freq_attr_scaling_available_freqs, -+ NULL, -+}; -+ -+static struct cpufreq_driver krait_cpufreq_driver = { -+ .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | -+ CPUFREQ_IS_COOLING_DEV, -+ .verify = cpufreq_generic_frequency_table_verify, -+ .target_index = set_target, -+ .get = cpufreq_generic_get, -+ .init = cpufreq_init, -+ .exit = cpufreq_exit, -+ .online = cpufreq_online, -+ .offline = cpufreq_offline, -+ .name = "krait-cpufreq", -+ .attr = krait_cpufreq_attr, -+ .suspend = cpufreq_generic_suspend, -+}; -+ -+struct krait_data { -+ unsigned long idle_freq; -+ bool regulator_enabled; -+}; -+ -+static int krait_cache_set_opp(struct dev_pm_set_opp_data *data) -+{ -+ unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate; -+ struct dev_pm_opp_supply *supply = &data->new_opp.supplies[0]; -+ struct regulator *reg = data->regulators[0]; -+ struct clk *clk = data->clk; -+ struct krait_data *kdata; -+ unsigned long idle_freq; -+ int ret; -+ -+ kdata = (struct krait_data *)dev_get_drvdata(data->dev); -+ idle_freq = kdata->idle_freq; -+ -+ /* Scaling up? Scale voltage before frequency */ -+ if (freq >= old_freq) { -+ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, -+ supply->u_volt, -+ supply->u_volt_max); -+ if (ret) -+ goto exit; -+ } -+ -+ /* -+ * Set to idle bin if switching from normal to high bin -+ * or vice versa. It has been notice that a bug is triggered -+ * in cache scaling when more than one bin is scaled, to fix -+ * this we first need to transition to the base rate and then -+ * to target rate -+ */ -+ if (likely(freq != idle_freq && old_freq != idle_freq)) { -+ ret = clk_set_rate(clk, idle_freq); -+ if (ret) -+ goto exit; -+ } -+ -+ ret = clk_set_rate(clk, freq); -+ if (ret) -+ goto exit; -+ -+ /* Scaling down? Scale voltage after frequency */ -+ if (freq < old_freq) { -+ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, -+ supply->u_volt, -+ supply->u_volt_max); -+ } -+ -+ if (unlikely(!kdata->regulator_enabled)) { -+ ret = regulator_enable(reg); -+ if (ret < 0) -+ dev_warn(data->dev, "Failed to enable regulator: %d", ret); -+ else -+ kdata->regulator_enabled = true; -+ } -+ -+exit: -+ return ret; -+}; -+ -+static int krait_cache_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct krait_data *data; -+ struct opp_table *table; -+ struct dev_pm_opp *opp; -+ struct device *cpu_dev; -+ int ret; -+ -+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ table = dev_pm_opp_set_regulators(dev, (const char *[]){ "l2" }, 1); -+ if (IS_ERR(table)) { -+ ret = PTR_ERR(table); -+ if (ret != -EPROBE_DEFER) -+ dev_err(dev, "failed to set regulators %d\n", ret); -+ -+ return ret; -+ } -+ -+ ret = PTR_ERR_OR_ZERO( -+ dev_pm_opp_register_set_opp_helper(dev, krait_cache_set_opp)); -+ if (ret) -+ return ret; -+ -+ ret = dev_pm_opp_of_add_table(dev); -+ if (ret) { -+ dev_err(dev, "failed to parse L2 freq thresholds\n"); -+ return ret; -+ } -+ -+ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq); -+ dev_pm_opp_put(opp); -+ -+ /* -+ * Check if we have at least opp-level 1, 0 should always be set to -+ * the idle freq -+ */ -+ opp = dev_pm_opp_find_level_exact(dev, 1); -+ if (IS_ERR(opp)) { -+ ret = PTR_ERR(opp); -+ dev_err(dev, -+ "Invalid configuration found of l2 opp. Can't find opp-level 1"); -+ goto invalid_conf; -+ } -+ dev_pm_opp_put(opp); -+ -+ /* -+ * Check opp-level configuration -+ * At least 2 level must be set or the cache will always be scaled -+ * the idle freq causing some performance problem -+ * -+ * In case of invalid configuration, the l2 scaling is skipped -+ */ -+ cpu_dev = get_cpu_device(0); -+ if (!cpu_dev) { -+ pr_err("failed to get cpu0 device\n"); -+ return -ENODEV; -+ } -+ -+ /* With opp error assume cpufreq still has to be registred. Defer probe. */ -+ ret = dev_pm_opp_get_opp_count(cpu_dev); -+ if (ret < 0) { -+ ret = -EPROBE_DEFER; -+ goto invalid_conf; -+ } -+ -+ /* -+ * Check if we have at least opp-level 1 in the cpu opp, 0 should always -+ * be set to the idle freq -+ */ -+ opp = dev_pm_opp_find_level_exact(cpu_dev, 1); -+ if (IS_ERR(opp)) { -+ ret = PTR_ERR(opp); -+ if (ret != -EPROBE_DEFER) -+ dev_err(dev, -+ "Invalid configuration found of cpu opp. Can't find opp-level 1"); -+ goto invalid_conf; -+ } -+ dev_pm_opp_put(opp); -+ -+ platform_set_drvdata(pdev, data); -+ -+ mutex_init(&lock); -+ -+ /* The l2 scaling is enabled by linking the cpufreq driver */ -+ l2_dev = dev; -+ -+ return 0; -+ -+invalid_conf: -+ dev_pm_opp_remove_table(dev); -+ dev_pm_opp_put_regulators(table); -+ dev_pm_opp_unregister_set_opp_helper(table); -+ -+ return ret; -+}; -+ -+static int krait_cache_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct opp_table *table = dev_pm_opp_get_opp_table(dev); -+ -+ dev_pm_opp_remove_table(dev); -+ dev_pm_opp_put_regulators(table); -+ dev_pm_opp_unregister_set_opp_helper(table); -+ -+ return 0; -+}; -+ -+static const struct of_device_id krait_cache_match_table[] = { -+ { .compatible = "qcom,krait-cache" }, -+ {} -+}; -+ -+static struct platform_driver krait_cache_driver = { -+ .driver = { -+ .name = "krait-cache", -+ .of_match_table = krait_cache_match_table, -+ }, -+ .probe = krait_cache_probe, -+ .remove = krait_cache_remove, -+}; -+module_platform_driver(krait_cache_driver); -+ -+static int krait_cpufreq_probe(struct platform_device *pdev) -+{ -+ struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev); -+ int ret; -+ -+ /* -+ * All per-cluster (CPUs sharing clock/voltages) initialization is done -+ * from ->init(). In probe(), we just need to make sure that clk and -+ * regulators are available. Else defer probe and retry. -+ * -+ * FIXME: Is checking this only for CPU0 sufficient ? -+ */ -+ ret = resources_available(); -+ if (ret) -+ return ret; -+ -+ if (data) { -+ if (data->have_governor_per_policy) -+ krait_cpufreq_driver.flags |= -+ CPUFREQ_HAVE_GOVERNOR_PER_POLICY; -+ -+ krait_cpufreq_driver.resume = data->resume; -+ if (data->suspend) -+ krait_cpufreq_driver.suspend = data->suspend; -+ } -+ -+ ret = cpufreq_register_driver(&krait_cpufreq_driver); -+ if (ret) -+ dev_err(&pdev->dev, "failed register driver: %d\n", ret); -+ -+ return ret; -+} -+ -+static int krait_cpufreq_remove(struct platform_device *pdev) -+{ -+ cpufreq_unregister_driver(&krait_cpufreq_driver); -+ return 0; -+} -+ -+static struct platform_driver krait_cpufreq_platdrv = { -+ .driver = { -+ .name = "krait-cpufreq", -+ }, -+ .probe = krait_cpufreq_probe, -+ .remove = krait_cpufreq_remove, -+}; -+ -+module_platform_driver(krait_cpufreq_platdrv); -+ -+MODULE_ALIAS("platform:krait-cpufreq"); -+MODULE_AUTHOR("Ansuel Smith "); -+MODULE_DESCRIPTION("Dedicated Krait SoC cpufreq driver"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/ipq806x/patches-5.15/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch b/target/linux/ipq806x/patches-5.15/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch deleted file mode 100644 index 316e18b790..0000000000 --- a/target/linux/ipq806x/patches-5.15/098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch +++ /dev/null @@ -1,237 +0,0 @@ -From c9ecd920324a647bf1f2b47f771c8f599cc7b551 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 22 Feb 2020 18:02:17 +0100 -Subject: [PATCH 2/8] Documentation: cpufreq: add qcom,krait-cache bindings - -Document dedicated cpufreq for Krait CPUs. - -Signed-off-by: Ansuel Smith ---- - .../bindings/cpufreq/qcom-cpufreq-krait.yaml | 221 ++++++++++++++++++ - 1 file changed, 221 insertions(+) - create mode 100644 Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml -@@ -0,0 +1,221 @@ -+# SPDX-License-Identifier: GPL-2.0 -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-krait.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: CPU Frequency scaling driver for Krait SoCs -+ -+maintainers: -+ - Ansuel Smith -+ -+description: | -+ The krait cpufreq driver is a dedicated frequency scaling driver -+ based on cpufreq-dt generic driver that scale L2 cache and the -+ cores. TEST -+ -+ The L2 cache is scaled based on the max clk across all cores and -+ the clock is decided based on the opp-level set in the device tree. -+ -+ Different core freq can be linked to a specific l2 freq and the driver -+ on frequency change will scale the core and the l2 clk based of the -+ linked freq. -+ -+ On Krait SoC is present a bug and on every L2 clk change the driver -+ needs to set the clk to the idle freq before changing it to the new value. -+ -+ This requires the qcom cpufreq nvmem driver to parse the different opp -+ core clk and an additional opp table for the l2 scaling. -+ -+ If the driver detect broken config (for example missing opp-level) the -+ cpufreq driver skips the l2 scaling -+ -+ Referring to this example opp-level can be used to link a range of cpu freq -+ to a specific l2 freq: -+ cpu opp freq 384000000 has opp-level 0 -+ l2 opp freq 384000000 has opp-level 0 -+ The driver will scale l2 to 384000000 -+ -+ cpu opp freq 600000000-1000000000 has opp-level 1 -+ l2 opp freq 1000000000 has opp-level 1 -+ The driver will scale l2 to 1000000000 -+ -+allOf: -+ - $ref: /schemas/cache-controller.yaml# -+ -+select: -+ properties: -+ compatible: -+ items: -+ - enum: -+ - qcom,krait-cache -+ -+ required: -+ - compatible -+ -+properties: -+ compatible: -+ items: -+ - const: qcom,krait-cache -+ - const: cache -+ -+ cache-level: -+ const: 2 -+ -+ clocks: -+ maxItems: 1 -+ -+ clock-names: -+ const: l2 -+ -+ l2-supply: true -+ -+ operating-points-v2: true -+ -+required: -+ - compatible -+ - cache-level -+ - clocks -+ - clock-names -+ - l2-supply -+ - operating-points-v2 -+ -+additionalProperties: false -+ -+examples: -+ - | -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu0: cpu@0 { -+ compatible = "qcom,krait"; -+ enable-method = "qcom,kpss-acc-v1"; -+ device_type = "cpu"; -+ reg = <0>; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc0>; -+ qcom,saw = <&saw0>; -+ clocks = <&kraitcc 0>, <&kraitcc 4>; -+ clock-names = "cpu", "l2"; -+ clock-latency = <100000>; -+ cpu-supply = <&smb208_s2a>; -+ operating-points-v2 = <&opp_table0>; -+ voltage-tolerance = <5>; -+ cooling-min-state = <0>; -+ cooling-max-state = <10>; -+ #cooling-cells = <2>; -+ cpu-idle-states = <&CPU_SPC>; -+ }; -+ -+ /* ... */ -+ -+ }; -+ -+ opp_table0: opp_table0 { -+ compatible = "operating-points-v2-kryo-cpu"; -+ nvmem-cells = <&speedbin_efuse>; -+ -+ opp-384000000 { -+ opp-hz = /bits/ 64 <384000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1000000>; -+ opp-microvolt-speed0-pvs1-v0 = <925000>; -+ opp-microvolt-speed0-pvs2-v0 = <875000>; -+ opp-microvolt-speed0-pvs3-v0 = <800000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <0>; -+ }; -+ -+ opp-600000000 { -+ opp-hz = /bits/ 64 <600000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1050000>; -+ opp-microvolt-speed0-pvs1-v0 = <975000>; -+ opp-microvolt-speed0-pvs2-v0 = <925000>; -+ opp-microvolt-speed0-pvs3-v0 = <850000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <1>; -+ }; -+ -+ opp-800000000 { -+ opp-hz = /bits/ 64 <800000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1100000>; -+ opp-microvolt-speed0-pvs1-v0 = <1025000>; -+ opp-microvolt-speed0-pvs2-v0 = <995000>; -+ opp-microvolt-speed0-pvs3-v0 = <900000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <1>; -+ }; -+ -+ opp-1000000000 { -+ opp-hz = /bits/ 64 <1000000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1150000>; -+ opp-microvolt-speed0-pvs1-v0 = <1075000>; -+ opp-microvolt-speed0-pvs2-v0 = <1025000>; -+ opp-microvolt-speed0-pvs3-v0 = <950000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <1>; -+ }; -+ -+ opp-1200000000 { -+ opp-hz = /bits/ 64 <1200000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1200000>; -+ opp-microvolt-speed0-pvs1-v0 = <1125000>; -+ opp-microvolt-speed0-pvs2-v0 = <1075000>; -+ opp-microvolt-speed0-pvs3-v0 = <1000000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <2>; -+ }; -+ -+ opp-1400000000 { -+ opp-hz = /bits/ 64 <1400000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1250000>; -+ opp-microvolt-speed0-pvs1-v0 = <1175000>; -+ opp-microvolt-speed0-pvs2-v0 = <1125000>; -+ opp-microvolt-speed0-pvs3-v0 = <1050000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <2>; -+ }; -+ }; -+ -+ opp_table_l2: opp_table_l2 { -+ compatible = "operating-points-v2"; -+ -+ opp-384000000 { -+ opp-hz = /bits/ 64 <384000000>; -+ opp-microvolt = <1100000>; -+ clock-latency-ns = <100000>; -+ opp-level = <0>; -+ }; -+ opp-1000000000 { -+ opp-hz = /bits/ 64 <1000000000>; -+ opp-microvolt = <1100000>; -+ clock-latency-ns = <100000>; -+ opp-level = <1>; -+ }; -+ opp-1200000000 { -+ opp-hz = /bits/ 64 <1200000000>; -+ opp-microvolt = <1150000>; -+ clock-latency-ns = <100000>; -+ opp-level = <2>; -+ }; -+ }; -+ -+ soc { -+ L2: l2-cache { -+ compatible = "qcom,krait-cache", "cache"; -+ cache-level = <2>; -+ -+ clocks = <&kraitcc 4>; -+ clock-names = "l2"; -+ l2-supply = <&smb208_s1a>; -+ operating-points-v2 = <&opp_table_l2>; -+ }; -+ }; -+ -+... diff --git a/target/linux/ipq806x/patches-5.15/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch b/target/linux/ipq806x/patches-5.15/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch new file mode 100644 index 0000000000..85feb89148 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch @@ -0,0 +1,242 @@ +From b044ae89862132a86fb511648e9c52ea3cdf8c30 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 5 Aug 2020 14:19:23 +0200 +Subject: [PATCH 1/4] devfreq: qcom: Add L2 Krait Cache devfreq scaling driver + +Qcom L2 Krait CPUs use the generic cpufreq-dt driver and doesn't actually +scale the Cache frequency when the CPU frequency is changed. This +devfreq driver register with the cpu notifier and scale the Cache +based on the max Freq across all core as the CPU cache is shared across +all of them. If provided this also scale the voltage of the regulator +attached to the CPU cache. The scaling logic is based on the CPU freq +and the 3 scaling interval are set by the device dts. + +Signed-off-by: Christian Marangi +--- + drivers/devfreq/Kconfig | 11 ++ + drivers/devfreq/Makefile | 1 + + drivers/devfreq/krait-cache-devfreq.c | 188 ++++++++++++++++++++++++++ + 3 files changed, 200 insertions(+) + create mode 100644 drivers/devfreq/krait-cache-devfreq.c + +--- a/drivers/devfreq/Kconfig ++++ b/drivers/devfreq/Kconfig +@@ -132,6 +132,17 @@ config ARM_RK3399_DMC_DEVFREQ + It sets the frequency for the memory controller and reads the usage counts + from hardware. + ++config ARM_KRAIT_CACHE_DEVFREQ ++ tristate "Scaling support for Krait CPU Cache Devfreq" ++ depends on ARCH_QCOM || COMPILE_TEST ++ select DEVFREQ_GOV_PASSIVE ++ help ++ This adds the DEVFREQ driver for the Krait CPU L2 Cache shared by all cores. ++ ++ The driver register with the cpufreq notifier and find the right frequency ++ based on the max frequency across all core and the range set in the device ++ dts. If provided this scale also the regulator attached to the l2 cache. ++ + source "drivers/devfreq/event/Kconfig" + + endif # PM_DEVFREQ +--- a/drivers/devfreq/Makefile ++++ b/drivers/devfreq/Makefile +@@ -13,6 +13,7 @@ obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ) += imx + obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += imx8m-ddrc.o + obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o + obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o ++obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o + + # DEVFREQ Event Drivers + obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/ +--- /dev/null ++++ b/drivers/devfreq/krait-cache-devfreq.c +@@ -0,0 +1,188 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "governor.h" ++ ++struct krait_cache_data { ++ struct clk *clk; ++ unsigned long idle_freq; ++}; ++ ++static int krait_cache_set_opp(struct dev_pm_set_opp_data *data) ++{ ++ unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate; ++ struct dev_pm_opp_supply *supply = &data->new_opp.supplies[0]; ++ struct regulator *reg = data->regulators[0]; ++ struct krait_cache_data *kdata; ++ struct clk *clk = data->clk; ++ unsigned long idle_freq; ++ int ret; ++ ++ kdata = dev_get_drvdata(data->dev); ++ idle_freq = kdata->idle_freq; ++ ++ if (reg) { ++ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, ++ supply->u_volt, ++ supply->u_volt_max); ++ if (ret) ++ goto exit; ++ } ++ ++ /* ++ * Set to idle bin if switching from normal to high bin ++ * or vice versa. It has been notice that a bug is triggered ++ * in cache scaling when more than one bin is scaled, to fix ++ * this we first need to transition to the base rate and then ++ * to target rate ++ */ ++ if (likely(freq != idle_freq && old_freq != idle_freq)) { ++ ret = clk_set_rate(clk, idle_freq); ++ if (ret) ++ goto exit; ++ } ++ ++ ret = clk_set_rate(clk, freq); ++ if (ret) ++ goto exit; ++ ++exit: ++ return ret; ++}; ++ ++static int krait_cache_get_cur_freq(struct device *dev, unsigned long *freq) ++{ ++ struct krait_cache_data *data = dev_get_drvdata(dev); ++ ++ *freq = clk_get_rate(data->clk); ++ ++ return 0; ++}; ++ ++static int krait_cache_target(struct device *dev, unsigned long *freq, ++ u32 flags) ++{ ++ struct dev_pm_opp *opp; ++ ++ opp = dev_pm_opp_find_freq_ceil(dev, freq); ++ if (unlikely(IS_ERR(opp))) ++ return PTR_ERR(opp); ++ ++ dev_pm_opp_put(opp); ++ ++ return dev_pm_opp_set_rate(dev, *freq); ++}; ++ ++static int krait_cache_get_dev_status(struct device *dev, ++ struct devfreq_dev_status *stat) ++{ ++ struct krait_cache_data *data = dev_get_drvdata(dev); ++ ++ stat->busy_time = 0; ++ stat->total_time = 0; ++ stat->current_frequency = clk_get_rate(data->clk); ++ ++ return 0; ++}; ++ ++static struct devfreq_dev_profile krait_cache_devfreq_profile = { ++ .target = krait_cache_target, ++ .get_dev_status = krait_cache_get_dev_status, ++ .get_cur_freq = krait_cache_get_cur_freq ++}; ++ ++static struct devfreq_passive_data devfreq_gov_data = { ++ .parent_type = CPUFREQ_PARENT_DEV, ++}; ++ ++static int krait_cache_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct krait_cache_data *data; ++ struct opp_table *table; ++ struct devfreq *devfreq; ++ struct dev_pm_opp *opp; ++ struct clk *clk; ++ int ret; ++ ++ krait_cache_devfreq_profile.freq_table = NULL; ++ ++ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); ++ if (!data) ++ return -ENOMEM; ++ ++ clk = devm_clk_get(dev, "l2"); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ ++ table = dev_pm_opp_set_regulators(dev, (const char *[]){ "l2" }, 1); ++ if (IS_ERR(table)) { ++ ret = PTR_ERR(table); ++ dev_err_probe(dev, -EPROBE_DEFER, "failed to set regulators %d\n", ret); ++ return ret; ++ } ++ ++ ret = PTR_ERR_OR_ZERO( ++ dev_pm_opp_register_set_opp_helper(dev, krait_cache_set_opp)); ++ if (ret) ++ return ret; ++ ++ ret = dev_pm_opp_of_add_table(dev); ++ if (ret) { ++ dev_err(dev, "failed to parse L2 freq thresholds\n"); ++ return ret; ++ } ++ ++ data->clk = clk; ++ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq); ++ dev_pm_opp_put(opp); ++ ++ dev_set_drvdata(dev, data); ++ ++ devfreq = devm_devfreq_add_device(&pdev->dev, &krait_cache_devfreq_profile, ++ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data); ++ if (IS_ERR(devfreq)) { ++ dev_pm_opp_remove_table(dev); ++ dev_pm_opp_put_regulators(table); ++ dev_pm_opp_unregister_set_opp_helper(table); ++ } ++ ++ return PTR_ERR_OR_ZERO(devfreq); ++}; ++ ++static int krait_cache_remove(struct platform_device *pdev) ++{ ++ dev_pm_opp_remove_table(&pdev->dev); ++ ++ return 0; ++}; ++ ++static const struct of_device_id krait_cache_match_table[] = { ++ { .compatible = "qcom,krait-cache" }, ++ {} ++}; ++ ++static struct platform_driver krait_cache_driver = { ++ .probe = krait_cache_probe, ++ .remove = krait_cache_remove, ++ .driver = { ++ .name = "krait-cache-scaling", ++ .of_match_table = krait_cache_match_table, ++ }, ++}; ++module_platform_driver(krait_cache_driver); ++ ++MODULE_DESCRIPTION("Krait CPU Cache Scaling driver"); ++MODULE_AUTHOR("Christian 'Ansuel' Marangi "); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-5.15/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch b/target/linux/ipq806x/patches-5.15/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch new file mode 100644 index 0000000000..f42729fd50 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch @@ -0,0 +1,50 @@ +From ef124ad0ff8abfbf4ebe3fe6d7dcef4541dec13a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 16 Jun 2022 18:39:21 +0200 +Subject: [PATCH] ARM: dts: qcom: add krait-cache compatible for ipq806x dtsi + +Add qcom,krait-cache compatible to enable cache devfreq driver for +ipq806x SoC and move the L2 node to the soc node to make the devfreq +driver correctly probe. + +Signed-off-by: Christian Marangi +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 22 +++++++++++----------- + 1 file changed, 11 insertions(+), 11 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -69,16 +69,6 @@ + min-residency-us = <3000>; + }; + }; +- +- L2: l2-cache { +- compatible = "cache"; +- cache-level = <2>; +- qcom,saw = <&saw_l2>; +- +- clocks = <&kraitcc 4>; +- clock-names = "l2"; +- operating-points-v2 = <&opp_table_l2>; +- }; + }; + + opp_table_l2: opp_table_l2 { +@@ -470,6 +460,16 @@ + ranges; + compatible = "simple-bus"; + ++ L2: l2-cache { ++ compatible = "cache", "qcom,krait-cache"; ++ cache-level = <2>; ++ qcom,saw = <&saw_l2>; ++ ++ clocks = <&kraitcc 4>; ++ clock-names = "l2"; ++ operating-points-v2 = <&opp_table_l2>; ++ }; ++ + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled";