From: Christian Lamparter Date: Mon, 20 Dec 2021 19:43:07 +0000 (+0100) Subject: apm821xx: drop 5.4 config and patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2593d510e2490e03b8fd7276a1a7080ac7e1ffe8;p=openwrt%2Fstaging%2Fmans0n.git apm821xx: drop 5.4 config and patches Signed-off-by: Christian Lamparter --- diff --git a/target/linux/apm821xx/config-5.4 b/target/linux/apm821xx/config-5.4 deleted file mode 100644 index e47186a444..0000000000 --- a/target/linux/apm821xx/config-5.4 +++ /dev/null @@ -1,343 +0,0 @@ -# CONFIG_40x is not set -CONFIG_44x=y -CONFIG_460EX=y -CONFIG_4xx=y -CONFIG_4xx_SOC=y -# CONFIG_ADVANCED_OPTIONS is not set -CONFIG_APM821xx=y -CONFIG_APOLLO3G=y -# CONFIG_ARCHES is not set -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y -CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_PMEM_API=y -CONFIG_ARCH_HAS_PTE_SPECIAL=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y -CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_MMAP_RND_BITS=11 -CONFIG_ARCH_MMAP_RND_BITS_MAX=17 -CONFIG_ARCH_MMAP_RND_BITS_MIN=11 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y -CONFIG_AUDIT_ARCH=y -# CONFIG_BAMBOO is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_PM=y -CONFIG_BLUESTONE=y -CONFIG_BOOKE=y -CONFIG_BOOKE_WDT=y -# CONFIG_CANYONLANDS is not set -CONFIG_CC_HAS_KASAN_GENERIC=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs noinitrd" -CONFIG_CMDLINE_BOOL=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_CCM=y -CONFIG_CRYPTO_CFB=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DEV_PPC4XX=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_ESSIV=y -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_MD5_PPC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_OFB=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA1_PPC=y -CONFIG_CRYPTO_SHA256=y -CONFIG_DATA_SHIFT=12 -CONFIG_DEBUG_MISC=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DMA_REMAP=y -CONFIG_DTC=y -# CONFIG_E200 is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_EBONY is not set -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -# CONFIG_EIGER is not set -CONFIG_ETEXT_SHIFT=12 -CONFIG_EXTRA_TARGETS="uImage" -CONFIG_FIXED_PHY=y -CONFIG_FORCE_PCI=y -CONFIG_FREEZER=y -# CONFIG_FSL_LBC is not set -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GCC_PLUGINS=y -# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set -# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set -# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -# CONFIG_GEN_RTC is not set -# CONFIG_GLACIER is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KASAN=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_NVRAM_OPS=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ASM_MODVERSIONS=y -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FAST_GUP=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MMU_GATHER_PAGE_SIZE=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PCI=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_PPC4XX=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IBM_IIC=y -CONFIG_IBM_EMAC=y -CONFIG_IBM_EMAC_EMAC4=y -CONFIG_IBM_EMAC_POLL_WEIGHT=32 -CONFIG_IBM_EMAC_RGMII=y -CONFIG_IBM_EMAC_RXB=128 -CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 -CONFIG_IBM_EMAC_TAH=y -CONFIG_IBM_EMAC_TXB=128 -# CONFIG_ICON is not set -CONFIG_ILLEGAL_POINTER_VALUE=0 -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_ISA_DMA_API=y -# CONFIG_JFFS2_FS is not set -# CONFIG_KATMAI is not set -CONFIG_KERNEL_START=0xc0000000 -CONFIG_LEDS_TRIGGER_MTD=y -CONFIG_LEDS_TRIGGER_PATTERN=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MATH_EMULATION is not set -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_IRQS=512 -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND=y -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -CONFIG_PACKING=y -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_PME=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_MSI=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYS_64BIT=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PM=y -CONFIG_PM_AUTOSLEEP=y -CONFIG_PM_SLEEP=y -CONFIG_PM_WAKELOCKS=y -CONFIG_PM_WAKELOCKS_GC=y -CONFIG_PM_WAKELOCKS_LIMIT=100 -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_PPC44x_SIMPLE=y -CONFIG_PPC4xx_CPM=y -CONFIG_PPC4xx_GPIO=y -CONFIG_PPC4xx_MSI=y -CONFIG_PPC4xx_PCI_EXPRESS=y -# CONFIG_PPC64 is not set -# CONFIG_PPC_47x is not set -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_8xx is not set -CONFIG_PPC_ADV_DEBUG_DACS=2 -CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y -CONFIG_PPC_ADV_DEBUG_DVCS=2 -CONFIG_PPC_ADV_DEBUG_IACS=4 -CONFIG_PPC_ADV_DEBUG_REGS=y -# CONFIG_PPC_BOOK3S_601 is not set -# CONFIG_PPC_BOOK3S_6xx is not set -CONFIG_PPC_DCR=y -CONFIG_PPC_DCR_NATIVE=y -# CONFIG_PPC_EARLY_DEBUG is not set -CONFIG_PPC_FPU=y -CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set -CONFIG_PPC_MMU_NOHASH=y -CONFIG_PPC_MMU_NOHASH_32=y -CONFIG_PPC_MSI_BITMAP=y -CONFIG_PPC_PAGE_SHIFT=12 -# CONFIG_PPC_PTDUMP is not set -CONFIG_PPC_UDBG_16550=y -CONFIG_PPC_WERROR=y -CONFIG_PTE_64BIT=y -# CONFIG_RAINIER is not set -CONFIG_RAS=y -CONFIG_REGULATOR=y -CONFIG_RSEQ=y -# CONFIG_SAM440EP is not set -# CONFIG_SCOM_DEBUGFS is not set -# CONFIG_SEQUOIA is not set -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SIMPLE_GPIO=y -CONFIG_SPARSE_IRQ=y -CONFIG_SRCU=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -# CONFIG_TAISHAN is not set -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_THREAD_SHIFT=13 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TINY_SRCU=y -CONFIG_USB_SUPPORT=y -CONFIG_VDSO32=y -# CONFIG_VIRTIO_MENU is not set -# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set -# CONFIG_WARP is not set -CONFIG_WATCHDOG_CORE=y -# CONFIG_XILINX_SYSACE is not set -# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_POWERPC=y -# CONFIG_YOSEMITE is not set -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/apm821xx/patches-5.4/111-crypto-crypto4xx-reduce-memory-fragmentation.patch b/target/linux/apm821xx/patches-5.4/111-crypto-crypto4xx-reduce-memory-fragmentation.patch deleted file mode 100644 index 4d23b8816a..0000000000 --- a/target/linux/apm821xx/patches-5.4/111-crypto-crypto4xx-reduce-memory-fragmentation.patch +++ /dev/null @@ -1,99 +0,0 @@ -From 3913dbe4b3256ead342572f7aba726a60ab5fd43 Mon Sep 17 00:00:00 2001 -Message-Id: <3913dbe4b3256ead342572f7aba726a60ab5fd43.1577917078.git.chunkeey@gmail.com> -From: Christian Lamparter -Date: Wed, 1 Jan 2020 22:28:28 +0100 -Subject: [PATCH 1/2] crypto: crypto4xx - reduce memory fragmentation -To: linux-crypto@vger.kernel.org -Cc: Herbert Xu - -With recent kernels (>5.2), the driver fails to probe, as the -allocation of the driver's scatter buffer fails with -ENOMEM. - -This happens in crypto4xx_build_sdr(). Where the driver tries -to get 512KiB (=PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD) of -continuous memory. This big chunk is by design, since the driver -uses this circumstance in the crypto4xx_copy_pkt_to_dst() to -its advantage: -"all scatter-buffers are all neatly organized in one big -continuous ringbuffer; So scatterwalk_map_and_copy() can be -instructed to copy a range of buffers in one go." - -The PowerPC arch does not have support for DMA_CMA. Hence, -this patch reorganizes the order in which the memory -allocations are done. Since the driver itself is responsible -for some of the issues. - -Signed-off-by: Christian Lamparter ---- - drivers/crypto/amcc/crypto4xx_core.c | 27 +++++++++++++-------------- - 1 file changed, 13 insertions(+), 14 deletions(-) - ---- a/drivers/crypto/amcc/crypto4xx_core.c -+++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -286,7 +286,8 @@ static u32 crypto4xx_build_gdr(struct cr - - static inline void crypto4xx_destroy_gdr(struct crypto4xx_device *dev) - { -- dma_free_coherent(dev->core_dev->device, -+ if (dev->gdr) -+ dma_free_coherent(dev->core_dev->device, - sizeof(struct ce_gd) * PPC4XX_NUM_GD, - dev->gdr, dev->gdr_pa); - } -@@ -354,13 +355,6 @@ static u32 crypto4xx_build_sdr(struct cr - { - int i; - -- /* alloc memory for scatter descriptor ring */ -- dev->sdr = dma_alloc_coherent(dev->core_dev->device, -- sizeof(struct ce_sd) * PPC4XX_NUM_SD, -- &dev->sdr_pa, GFP_ATOMIC); -- if (!dev->sdr) -- return -ENOMEM; -- - dev->scatter_buffer_va = - dma_alloc_coherent(dev->core_dev->device, - PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD, -@@ -368,6 +362,13 @@ static u32 crypto4xx_build_sdr(struct cr - if (!dev->scatter_buffer_va) - return -ENOMEM; - -+ /* alloc memory for scatter descriptor ring */ -+ dev->sdr = dma_alloc_coherent(dev->core_dev->device, -+ sizeof(struct ce_sd) * PPC4XX_NUM_SD, -+ &dev->sdr_pa, GFP_ATOMIC); -+ if (!dev->sdr) -+ return -ENOMEM; -+ - for (i = 0; i < PPC4XX_NUM_SD; i++) { - dev->sdr[i].ptr = dev->scatter_buffer_pa + - PPC4XX_SD_BUFFER_SIZE * i; -@@ -1439,16 +1440,15 @@ static int crypto4xx_probe(struct platfo - spin_lock_init(&core_dev->lock); - INIT_LIST_HEAD(&core_dev->dev->alg_list); - ratelimit_default_init(&core_dev->dev->aead_ratelimit); -+ rc = crypto4xx_build_sdr(core_dev->dev); -+ if (rc) -+ goto err_build_sdr; - rc = crypto4xx_build_pdr(core_dev->dev); - if (rc) -- goto err_build_pdr; -+ goto err_build_sdr; - - rc = crypto4xx_build_gdr(core_dev->dev); - if (rc) -- goto err_build_pdr; -- -- rc = crypto4xx_build_sdr(core_dev->dev); -- if (rc) - goto err_build_sdr; - - /* Init tasklet for bottom half processing */ -@@ -1493,7 +1493,6 @@ err_iomap: - err_build_sdr: - crypto4xx_destroy_sdr(core_dev->dev); - crypto4xx_destroy_gdr(core_dev->dev); --err_build_pdr: - crypto4xx_destroy_pdr(core_dev->dev); - kfree(core_dev->dev); - err_alloc_dev: diff --git a/target/linux/apm821xx/patches-5.4/112-crypto-crypto4xx-use-GFP_KERNEL-for-big-allocations.patch b/target/linux/apm821xx/patches-5.4/112-crypto-crypto4xx-use-GFP_KERNEL-for-big-allocations.patch deleted file mode 100644 index 6668c3a91d..0000000000 --- a/target/linux/apm821xx/patches-5.4/112-crypto-crypto4xx-use-GFP_KERNEL-for-big-allocations.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 5bacaaea8a228bc46f402595b1694ef9128f3599 Mon Sep 17 00:00:00 2001 -Message-Id: <5bacaaea8a228bc46f402595b1694ef9128f3599.1577917078.git.chunkeey@gmail.com> -In-Reply-To: <3913dbe4b3256ead342572f7aba726a60ab5fd43.1577917078.git.chunkeey@gmail.com> -References: <3913dbe4b3256ead342572f7aba726a60ab5fd43.1577917078.git.chunkeey@gmail.com> -From: Christian Lamparter -Date: Wed, 1 Jan 2020 22:54:54 +0100 -Subject: [PATCH 2/2] crypto: crypto4xx - use GFP_KERNEL for big allocations -To: linux-crypto@vger.kernel.org -Cc: Herbert Xu - -The driver should use GFP_KERNEL for the bigger allocation -during the driver's crypto4xx_probe() and not GFP_ATOMIC in -my opinion. - -Signed-off-by: Christian Lamparter ---- - drivers/crypto/amcc/crypto4xx_core.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/crypto/amcc/crypto4xx_core.c -+++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -169,7 +169,7 @@ static u32 crypto4xx_build_pdr(struct cr - int i; - dev->pdr = dma_alloc_coherent(dev->core_dev->device, - sizeof(struct ce_pd) * PPC4XX_NUM_PD, -- &dev->pdr_pa, GFP_ATOMIC); -+ &dev->pdr_pa, GFP_KERNEL); - if (!dev->pdr) - return -ENOMEM; - -@@ -185,13 +185,13 @@ static u32 crypto4xx_build_pdr(struct cr - dev->shadow_sa_pool = dma_alloc_coherent(dev->core_dev->device, - sizeof(union shadow_sa_buf) * PPC4XX_NUM_PD, - &dev->shadow_sa_pool_pa, -- GFP_ATOMIC); -+ GFP_KERNEL); - if (!dev->shadow_sa_pool) - return -ENOMEM; - - dev->shadow_sr_pool = dma_alloc_coherent(dev->core_dev->device, - sizeof(struct sa_state_record) * PPC4XX_NUM_PD, -- &dev->shadow_sr_pool_pa, GFP_ATOMIC); -+ &dev->shadow_sr_pool_pa, GFP_KERNEL); - if (!dev->shadow_sr_pool) - return -ENOMEM; - for (i = 0; i < PPC4XX_NUM_PD; i++) { -@@ -277,7 +277,7 @@ static u32 crypto4xx_build_gdr(struct cr - { - dev->gdr = dma_alloc_coherent(dev->core_dev->device, - sizeof(struct ce_gd) * PPC4XX_NUM_GD, -- &dev->gdr_pa, GFP_ATOMIC); -+ &dev->gdr_pa, GFP_KERNEL); - if (!dev->gdr) - return -ENOMEM; - -@@ -358,14 +358,14 @@ static u32 crypto4xx_build_sdr(struct cr - dev->scatter_buffer_va = - dma_alloc_coherent(dev->core_dev->device, - PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD, -- &dev->scatter_buffer_pa, GFP_ATOMIC); -+ &dev->scatter_buffer_pa, GFP_KERNEL); - if (!dev->scatter_buffer_va) - return -ENOMEM; - - /* alloc memory for scatter descriptor ring */ - dev->sdr = dma_alloc_coherent(dev->core_dev->device, - sizeof(struct ce_sd) * PPC4XX_NUM_SD, -- &dev->sdr_pa, GFP_ATOMIC); -+ &dev->sdr_pa, GFP_KERNEL); - if (!dev->sdr) - return -ENOMEM; - diff --git a/target/linux/apm821xx/patches-5.4/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-5.4/201-add-amcc-apollo3g-support.patch deleted file mode 100644 index e188954094..0000000000 --- a/target/linux/apm821xx/patches-5.4/201-add-amcc-apollo3g-support.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/powerpc/platforms/44x/Kconfig -+++ b/arch/powerpc/platforms/44x/Kconfig -@@ -121,6 +121,17 @@ config CANYONLANDS - help - This option enables support for the AMCC PPC460EX evaluation board. - -+config APOLLO3G -+ bool "Apollo3G" -+ depends on 44x -+ default n -+ select PPC44x_SIMPLE -+ select APM821xx -+ select IBM_EMAC_RGMII -+ select 460EX -+ help -+ This option enables support for the AMCC Apollo 3G board. -+ - config GLACIER - bool "Glacier" - depends on 44x ---- a/arch/powerpc/platforms/44x/ppc44x_simple.c -+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c -@@ -47,6 +47,7 @@ machine_device_initcall(ppc44x_simple, p - * board.c file for it rather than adding it to this list. - */ - static char *board[] __initdata = { -+ "amcc,apollo3g", - "amcc,arches", - "amcc,bamboo", - "apm,bluestone", diff --git a/target/linux/apm821xx/patches-5.4/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-5.4/300-fix-atheros-nics-on-apm82181.patch deleted file mode 100644 index 110726d258..0000000000 --- a/target/linux/apm821xx/patches-5.4/300-fix-atheros-nics-on-apm82181.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/arch/powerpc/platforms/4xx/pci.c -+++ b/arch/powerpc/platforms/4xx/pci.c -@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po - u32 val; - - /* -- * Do a software reset on PCIe ports. -- * This code is to fix the issue that pci drivers doesn't re-assign -- * bus number for PCIE devices after Uboot -- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 -- * PT quad port, SAS LSI 1064E) -+ * Only reset the PHY when no link is currently established. -+ * This is for the Atheros PCIe board which has problems to establish -+ * the link (again) after this PHY reset. All other currently tested -+ * PCIe boards don't show this problem. - */ -- -- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); -- mdelay(10); -+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); -+ if (!(val & 0x00001000)) { -+ /* -+ * Do a software reset on PCIe ports. -+ * This code is to fix the issue that pci drivers doesn't re-assign -+ * bus number for PCIE devices after Uboot -+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 -+ * PT quad port, SAS LSI 1064E) -+ */ -+ -+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); -+ mdelay(10); -+ } - - if (port->endpoint) - val = PTYPE_LEGACY_ENDPOINT << 20; -@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po - mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130); - mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); - -- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); -- mdelay(50); -- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); -+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); -+ if (!(val & 0x00001000)) { -+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); -+ mdelay(50); -+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); -+ } - - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, - mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | diff --git a/target/linux/apm821xx/patches-5.4/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-5.4/301-fix-memory-map-wndr4700.patch deleted file mode 100644 index 452d97e85a..0000000000 --- a/target/linux/apm821xx/patches-5.4/301-fix-memory-map-wndr4700.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/powerpc/platforms/4xx/pci.c -+++ b/arch/powerpc/platforms/4xx/pci.c -@@ -1902,9 +1902,9 @@ static void __init ppc4xx_configure_pcie - * if it works - */ - out_le32(mbase + PECFG_PIM0LAL, 0x00000000); -- out_le32(mbase + PECFG_PIM0LAH, 0x00000000); -+ out_le32(mbase + PECFG_PIM0LAH, 0x00000008); - out_le32(mbase + PECFG_PIM1LAL, 0x00000000); -- out_le32(mbase + PECFG_PIM1LAH, 0x00000000); -+ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c); - out_le32(mbase + PECFG_PIM01SAH, 0xffff0000); - out_le32(mbase + PECFG_PIM01SAL, 0x00000000); - diff --git a/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch deleted file mode 100644 index b85f62e680..0000000000 --- a/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch +++ /dev/null @@ -1,1026 +0,0 @@ -Subject: [PATCH v2 1/5] usb: xhci: add firmware loader for uPD720201 and uPD720202 w/o ROM -Date: Fri, 21 Jun 2019 14:29:09 +0530 -Message-Id: <20190621085913.8722-2-vkoul@kernel.org> -From: Christian Lamparter - -This patch adds a firmware loader for the uPD720201K8-711-BAC-A -and uPD720202K8-711-BAA-A variant. Both of these chips are listed -in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as -devices which need the firmware loader on page 2 in order to -work as they "do not support the External ROM". - -The "Firmware Download Sequence" is describe in chapter -"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. - -The firmware "K2013080.mem" is available from a USB3.0 Host to -PCIe Adapter (PP2U-E card) "Firmware download" archive. An -alternative version can be sourced from Netgear's WNDR4700 GPL -archives. - -The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 -(2012-06-15) state that the firmware is for the following devices: - - uPD720201 ES 2.0 sample whose revision ID is 2. - - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. - -Cc: Yoshihiro Shimoda -Signed-off-by: Christian Lamparter -Signed-off-by: Bjorn Andersson -[vkoul: fixed comments: - used macros for timeout count and delay - removed renesas_fw_alive_check - cleaned renesas_fw_callback - removed recurion for renesas_fw_download - added MODULE_FIRMWARE] -Signed-off-by: Vinod Koul ---- - drivers/usb/host/xhci-pci.c | 458 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 458 insertions(+) - ---- a/drivers/usb/host/xhci-pci.c -+++ b/drivers/usb/host/xhci-pci.c -@@ -12,6 +12,8 @@ - #include - #include - #include -+#include -+#include - - #include "xhci.h" - #include "xhci-trace.h" -@@ -72,6 +74,44 @@ - #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142 - #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242 - -+#define RENESAS_FW_VERSION 0x6C -+#define RENESAS_ROM_CONFIG 0xF0 -+#define RENESAS_FW_STATUS 0xF4 -+#define RENESAS_FW_STATUS_MSB 0xF5 -+#define RENESAS_ROM_STATUS 0xF6 -+#define RENESAS_ROM_STATUS_MSB 0xF7 -+#define RENESAS_DATA0 0xF8 -+#define RENESAS_DATA1 0xFC -+ -+#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7) -+#define RENESAS_FW_VERSION_OFFSET 8 -+ -+#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0) -+#define RENESAS_FW_STATUS_LOCK BIT(1) -+#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4) -+ #define RENESAS_FW_STATUS_INVALID 0 -+ #define RENESAS_FW_STATUS_SUCCESS BIT(4) -+ #define RENESAS_FW_STATUS_ERROR BIT(5) -+#define RENESAS_FW_STATUS_SET_DATA0 BIT(8) -+#define RENESAS_FW_STATUS_SET_DATA1 BIT(9) -+ -+#define RENESAS_ROM_STATUS_ACCESS BIT(0) -+#define RENESAS_ROM_STATUS_ERASE BIT(1) -+#define RENESAS_ROM_STATUS_RELOAD BIT(2) -+#define RENESAS_ROM_STATUS_RESULT GENMASK(6, 4) -+ #define RENESAS_ROM_STATUS_INVALID 0 -+ #define RENESAS_ROM_STATUS_SUCCESS BIT(4) -+ #define RENESAS_ROM_STATUS_ERROR BIT(5) -+#define RENESAS_ROM_STATUS_SET_DATA0 BIT(8) -+#define RENESAS_ROM_STATUS_SET_DATA1 BIT(9) -+#define RENESAS_ROM_STATUS_ROM_EXISTS BIT(15) -+ -+#define RENESAS_ROM_ERASE_MAGIC 0x5A65726F -+#define RENESAS_ROM_WRITE_MAGIC 0x53524F4D -+ -+#define RENESAS_RETRY 1000 -+#define RENESAS_DELAY 10 -+ - static const char hcd_name[] = "xhci_hcd"; - - static struct hc_driver __read_mostly xhci_pci_hc_driver; -@@ -327,6 +367,873 @@ static void xhci_pme_acpi_rtd3_enable(st - static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } - #endif /* CONFIG_ACPI */ - -+static const struct renesas_fw_entry { -+ const char *firmware_name; -+ u16 device; -+ u8 revision; -+ u16 expected_version; -+} renesas_fw_table[] = { -+ /* -+ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A -+ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which -+ * need the software loader. -+ * -+ * PP2U/ReleaseNote_USB3-201-202-FW.txt: -+ * -+ * Note: This firmware is for the following devices. -+ * - uPD720201 ES 2.0 sample whose revision ID is 2. -+ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. -+ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. -+ * -+ * Entry expected_version should be kept in increasing order for a -+ * chip, so that driver will pick first version and if that fails -+ * then next one will be picked -+ */ -+ { "K2013080.mem", 0x0014, 0x02, 0x2013 }, -+ { "K2013080.mem", 0x0014, 0x03, 0x2013 }, -+ { "K2026090.mem", 0x0014, 0x03, 0x2026 }, -+ { "K2013080.mem", 0x0015, 0x02, 0x2013 }, -+ { "K2026090.mem", 0x0015, 0x02, 0x2026 }, -+}; -+ -+MODULE_FIRMWARE("K2013080.mem"); -+MODULE_FIRMWARE("K2026090.mem"); -+ -+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev) -+{ -+ const struct renesas_fw_entry *entry; -+ size_t i; -+ -+ /* This loader will only work with a RENESAS device. */ -+ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS)) -+ return NULL; -+ -+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) { -+ entry = &renesas_fw_table[i]; -+ if (entry->device == dev->device && -+ entry->revision == dev->revision) -+ return entry; -+ } -+ -+ return NULL; -+} -+ -+static const struct -+renesas_fw_entry *renesas_get_next_entry(struct pci_dev *dev, -+ const struct renesas_fw_entry *entry) -+{ -+ const struct renesas_fw_entry *next_entry; -+ size_t i; -+ -+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) { -+ next_entry = &renesas_fw_table[i]; -+ if (next_entry->device == dev->device && -+ next_entry->revision == dev->revision && -+ next_entry->expected_version > entry->expected_version) -+ return next_entry; -+ } -+ -+ return NULL; -+} -+ -+static int renesas_fw_download_image(struct pci_dev *dev, -+ const u32 *fw, -+ size_t step) -+{ -+ size_t i; -+ int err; -+ u8 fw_status; -+ bool data0_or_data1; -+ -+ /* -+ * The hardware does alternate between two 32-bit pages. -+ * (This is because each row of the firmware is 8 bytes). -+ * -+ * for even steps we use DATA0, for odd steps DATA1. -+ */ -+ data0_or_data1 = (step & 1) == 1; -+ -+ /* step+1. Read "Set DATAX" and confirm it is cleared. */ -+ for (i = 0; i < RENESAS_RETRY; i++) { -+ err = pci_read_config_byte(dev, RENESAS_FW_STATUS_MSB, -+ &fw_status); -+ if (err) -+ return pcibios_err_to_errno(err); -+ if (!(fw_status & BIT(data0_or_data1))) -+ break; -+ -+ udelay(RENESAS_DELAY); -+ } -+ if (i == RENESAS_RETRY) -+ return -ETIMEDOUT; -+ -+ /* -+ * step+2. Write FW data to "DATAX". -+ * "LSB is left" => force little endian -+ */ -+ err = pci_write_config_dword(dev, data0_or_data1 ? -+ RENESAS_DATA1 : RENESAS_DATA0, -+ (__force u32)cpu_to_le32(fw[step])); -+ if (err) -+ return pcibios_err_to_errno(err); -+ -+ udelay(100); -+ -+ /* step+3. Set "Set DATAX". */ -+ err = pci_write_config_byte(dev, RENESAS_FW_STATUS_MSB, -+ BIT(data0_or_data1)); -+ if (err) -+ return pcibios_err_to_errno(err); -+ -+ return 0; -+} -+ -+static int renesas_fw_verify(struct pci_dev *dev, -+ const void *fw_data, -+ size_t length) -+{ -+ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev); -+ u16 fw_version_pointer; -+ u16 fw_version; -+ -+ if (!entry) -+ return -EINVAL; -+ -+ /* -+ * The Firmware's Data Format is describe in -+ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124 -+ */ -+ -+ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */ -+ if (length % 8 != 0) -+ dev_warn(&dev->dev, "firmware size is not a multiple of 8."); -+ -+ /* -+ * The bootrom chips of the big brother have sizes up to 64k, let's -+ * assume that's the biggest the firmware can get. -+ */ -+ if (length < 0x1000 || length >= 0x10000) { -+ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).", -+ length); -+ return -EINVAL; -+ } -+ -+ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */ -+ if (get_unaligned_le16(fw_data) != 0x55aa) { -+ dev_err(&dev->dev, "no valid firmware header found."); -+ return -EINVAL; -+ } -+ -+ /* verify the firmware version position and print it. */ -+ fw_version_pointer = get_unaligned_le16(fw_data + 4); -+ if (fw_version_pointer + 2 >= length) { -+ dev_err(&dev->dev, -+ "firmware version pointer is outside of the firmware image."); -+ return -EINVAL; -+ } -+ -+ fw_version = get_unaligned_le16(fw_data + fw_version_pointer); -+ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version); -+ -+ if (fw_version != entry->expected_version) { -+ dev_err(&dev->dev, -+ "firmware version mismatch, expected version: %02x.", -+ entry->expected_version); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int renesas_check_rom_state(struct pci_dev *pdev) -+{ -+ const struct renesas_fw_entry *entry; -+ u16 rom_state; -+ u32 version; -+ bool valid_version = false; -+ int err, i; -+ -+ /* check FW version */ -+ err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version); -+ if (err) -+ return pcibios_err_to_errno(err); -+ -+ version &= RENESAS_FW_VERSION_FIELD; -+ version = version >> RENESAS_FW_VERSION_OFFSET; -+ dev_dbg(&pdev->dev, "Found FW version loaded is %x\n", version); -+ -+ /* treat version in renesas_fw_table as correct ones */ -+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) { -+ entry = &renesas_fw_table[i]; -+ if (version == entry->expected_version) { -+ dev_dbg(&pdev->dev, "Detected valid ROM version..\n"); -+ valid_version = true; -+ } -+ } -+ -+ /* -+ * Test if ROM is present and loaded, if so we can skip everything -+ */ -+ err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state); -+ if (err) -+ return pcibios_err_to_errno(err); -+ -+ if (rom_state & BIT(15)) { -+ /* ROM exists */ -+ dev_dbg(&pdev->dev, "ROM exists\n"); -+ -+ /* Check the "Result Code" Bits (6:4) and act accordingly */ -+ switch (rom_state & RENESAS_ROM_STATUS_RESULT) { -+ case RENESAS_ROM_STATUS_SUCCESS: -+ dev_dbg(&pdev->dev, "Success ROM load..."); -+ /* we have valid version and status so success */ -+ if (valid_version) -+ return 0; -+ break; -+ -+ case RENESAS_ROM_STATUS_INVALID: /* No result yet */ -+ dev_dbg(&pdev->dev, "No result as it is ROM..."); -+ /* we have valid version and status so success */ -+ if (valid_version) -+ return 0; -+ break; -+ -+ case RENESAS_ROM_STATUS_ERROR: /* Error State */ -+ default: /* All other states are marked as "Reserved states" */ -+ dev_err(&pdev->dev, "Invalid ROM.."); -+ break; -+ } -+ } -+ -+ return -EIO; -+} -+ -+static int renesas_fw_check_running(struct pci_dev *pdev) -+{ -+ int err; -+ u8 fw_state; -+ -+ /* Check if device has ROM and loaded, if so skip everything */ -+ err = renesas_check_rom_state(pdev); -+ if (!err) -+ return err; -+ -+ /* -+ * Test if the device is actually needing the firmware. As most -+ * BIOSes will initialize the device for us. If the device is -+ * initialized. -+ */ -+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state); -+ if (err) -+ return pcibios_err_to_errno(err); -+ -+ /* -+ * Check if "FW Download Lock" is locked. If it is and the FW is -+ * ready we can simply continue. If the FW is not ready, we have -+ * to give up. -+ */ -+ if (fw_state & RENESAS_FW_STATUS_LOCK) { -+ dev_dbg(&pdev->dev, "FW Download Lock is engaged."); -+ -+ if (fw_state & RENESAS_FW_STATUS_SUCCESS) -+ return 0; -+ -+ dev_err(&pdev->dev, -+ "FW Download Lock is set and FW is not ready. Giving Up."); -+ return -EIO; -+ } -+ -+ /* -+ * Check if "FW Download Enable" is set. If someone (us?) tampered -+ * with it and it can't be resetted, we have to give up too... and -+ * ask for a forgiveness and a reboot. -+ */ -+ if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) { -+ dev_err(&pdev->dev, -+ "FW Download Enable is stale. Giving Up (poweroff/reboot needed)."); -+ return -EIO; -+ } -+ -+ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */ -+ switch (fw_state & RENESAS_FW_STATUS_RESULT) { -+ case 0: /* No result yet */ -+ dev_dbg(&pdev->dev, "FW is not ready/loaded yet."); -+ -+ /* tell the caller, that this device needs the firmware. */ -+ return 1; -+ -+ case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */ -+ dev_dbg(&pdev->dev, "FW is ready."); -+ return 0; -+ -+ case RENESAS_FW_STATUS_ERROR: /* Error State */ -+ dev_err(&pdev->dev, -+ "hardware is in an error state. Giving up (poweroff/reboot needed)."); -+ return -ENODEV; -+ -+ default: /* All other states are marked as "Reserved states" */ -+ dev_err(&pdev->dev, -+ "hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).", -+ (fw_state & RENESAS_FW_STATUS_RESULT) >> 4); -+ return -EINVAL; -+ } -+} -+ -+static int renesas_fw_download(struct pci_dev *pdev, -+ const struct firmware *fw) -+{ -+ const u32 *fw_data = (const u32 *)fw->data; -+ size_t i; -+ int err; -+ u8 fw_status; -+ -+ /* -+ * For more information and the big picture: please look at the -+ * "Firmware Download Sequence" in "7.1 FW Download Interface" -+ * of R19UH0078EJ0500 Rev.5.00 page 131 -+ */ -+ -+ /* -+ * 0. Set "FW Download Enable" bit in the -+ * "FW Download Control & Status Register" at 0xF4 -+ */ -+ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, -+ RENESAS_FW_STATUS_DOWNLOAD_ENABLE); -+ if (err) -+ return pcibios_err_to_errno(err); -+ -+ /* 1 - 10 follow one step after the other. */ -+ for (i = 0; i < fw->size / 4; i++) { -+ err = renesas_fw_download_image(pdev, fw_data, i); -+ if (err) { -+ dev_err(&pdev->dev, -+ "Firmware Download Step %zd failed at position %zd bytes with (%d).", -+ i, i * 4, err); -+ return err; -+ } -+ } -+ -+ /* -+ * This sequence continues until the last data is written to -+ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1" -+ * is cleared by the hardware beforehand. -+ */ -+ for (i = 0; i < RENESAS_RETRY; i++) { -+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB, -+ &fw_status); -+ if (err) -+ return pcibios_err_to_errno(err); -+ if (!(fw_status & (BIT(0) | BIT(1)))) -+ break; -+ -+ udelay(RENESAS_DELAY); -+ } -+ if (i == RENESAS_RETRY) -+ dev_warn(&pdev->dev, "Final Firmware Download step timed out."); -+ -+ /* -+ * 11. After finishing writing the last data of FW, the -+ * System Software must clear "FW Download Enable" -+ */ -+ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0); -+ if (err) -+ return pcibios_err_to_errno(err); -+ -+ /* 12. Read "Result Code" and confirm it is good. */ -+ for (i = 0; i < RENESAS_RETRY; i++) { -+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status); -+ if (err) -+ return pcibios_err_to_errno(err); -+ if (fw_status & RENESAS_FW_STATUS_SUCCESS) -+ break; -+ -+ udelay(RENESAS_DELAY); -+ } -+ if (i == RENESAS_RETRY) { -+ /* Timed out / Error - let's see if we can fix this */ -+ err = renesas_fw_check_running(pdev); -+ switch (err) { -+ case 0: /* -+ * we shouldn't end up here. -+ * maybe it took a little bit longer. -+ * But all should be well? -+ */ -+ break; -+ -+ case 1: /* (No result yet! */ -+ return -ETIMEDOUT; -+ -+ default: -+ return err; -+ } -+ } -+ /* -+ * Optional last step: Engage Firmware Lock -+ * -+ * err = pci_write_config_byte(pdev, 0xF4, BIT(2)); -+ * if (err) -+ * return pcibios_err_to_errno(err); -+ */ -+ -+ return 0; -+} -+ -+struct renesas_fw_ctx { -+ struct pci_dev *pdev; -+ const struct pci_device_id *id; -+ bool resume; -+ const struct renesas_fw_entry *entry; -+}; -+ -+static int xhci_pci_probe(struct pci_dev *pdev, -+ const struct pci_device_id *id); -+ -+static bool renesas_check_rom(struct pci_dev *pdev) -+{ -+ u16 rom_status; -+ int retval; -+ -+ /* 1. Check if external ROM exists */ -+ retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status); -+ if (retval) -+ return false; -+ -+ rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS; -+ if (rom_status) { -+ dev_dbg(&pdev->dev, "External ROM exists\n"); -+ return true; /* External ROM exists */ -+ } -+ -+ return false; -+} -+ -+static void renesas_rom_erase(struct pci_dev *pdev) -+{ -+ int retval, i; -+ u8 status; -+ -+ dev_dbg(&pdev->dev, "Performing ROM Erase...\n"); -+ retval = pci_write_config_dword(pdev, RENESAS_DATA0, -+ RENESAS_ROM_ERASE_MAGIC); -+ if (retval) { -+ dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n", -+ pcibios_err_to_errno(retval)); -+ return; -+ } -+ -+ retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); -+ if (retval) { -+ dev_err(&pdev->dev, "ROM status read failed: %d\n", -+ pcibios_err_to_errno(retval)); -+ return; -+ } -+ status |= RENESAS_ROM_STATUS_ERASE; -+ retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status); -+ if (retval) { -+ dev_err(&pdev->dev, "ROM erase set word write failed\n"); -+ return; -+ } -+ -+ /* sleep a bit while ROM is erased */ -+ msleep(20); -+ -+ for (i = 0; i < RENESAS_RETRY; i++) { -+ retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, -+ &status); -+ status &= RENESAS_ROM_STATUS_ERASE; -+ if (!status) -+ break; -+ -+ mdelay(RENESAS_DELAY); -+ } -+ -+ if (i == RENESAS_RETRY) -+ dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status); -+ -+ dev_dbg(&pdev->dev, "ROM Erase... Done success\n"); -+} -+ -+static bool renesas_download_rom(struct pci_dev *pdev, -+ const u32 *fw, size_t step) -+{ -+ bool data0_or_data1; -+ u8 fw_status; -+ size_t i; -+ int err; -+ -+ /* -+ * The hardware does alternate between two 32-bit pages. -+ * (This is because each row of the firmware is 8 bytes). -+ * -+ * for even steps we use DATA0, for odd steps DATA1. -+ */ -+ data0_or_data1 = (step & 1) == 1; -+ -+ /* Read "Set DATAX" and confirm it is cleared. */ -+ for (i = 0; i < RENESAS_RETRY; i++) { -+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB, -+ &fw_status); -+ if (err) { -+ dev_err(&pdev->dev, "Read ROM Status failed: %d\n", -+ pcibios_err_to_errno(err)); -+ return false; -+ } -+ if (!(fw_status & BIT(data0_or_data1))) -+ break; -+ -+ udelay(RENESAS_DELAY); -+ } -+ if (i == RENESAS_RETRY) { -+ dev_err(&pdev->dev, "Timeout for Set DATAX step: %zd\n", step); -+ return false; -+ } -+ -+ /* -+ * Write FW data to "DATAX". -+ * "LSB is left" => force little endian -+ */ -+ err = pci_write_config_dword(pdev, data0_or_data1 ? -+ RENESAS_DATA1 : RENESAS_DATA0, -+ (__force u32)cpu_to_le32(fw[step])); -+ if (err) { -+ dev_err(&pdev->dev, "Write to DATAX failed: %d\n", -+ pcibios_err_to_errno(err)); -+ return false; -+ } -+ -+ udelay(100); -+ -+ /* Set "Set DATAX". */ -+ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS_MSB, -+ BIT(data0_or_data1)); -+ if (err) { -+ dev_err(&pdev->dev, "Write config for DATAX failed: %d\n", -+ pcibios_err_to_errno(err)); -+ return false; -+ } -+ -+ return true; -+} -+ -+static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw) -+{ -+ const u32 *fw_data = (const u32 *)fw->data; -+ int err, i; -+ u8 status; -+ -+ /* 2. Write magic word to Data0 */ -+ err = pci_write_config_dword(pdev, RENESAS_DATA0, -+ RENESAS_ROM_WRITE_MAGIC); -+ if (err) -+ return false; -+ -+ /* 3. Set External ROM access */ -+ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, -+ RENESAS_ROM_STATUS_ACCESS); -+ if (err) -+ goto remove_bypass; -+ -+ /* 4. Check the result */ -+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); -+ if (err) -+ goto remove_bypass; -+ status &= GENMASK(6, 4); -+ if (status) { -+ dev_err(&pdev->dev, -+ "setting external rom failed: %x\n", status); -+ goto remove_bypass; -+ } -+ -+ /* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */ -+ for (i = 0; i < fw->size / 4; i++) { -+ err = renesas_download_rom(pdev, fw_data, i); -+ if (!err) { -+ dev_err(&pdev->dev, -+ "ROM Download Step %d failed at position %d bytes\n", -+ i, i * 4); -+ goto remove_bypass; -+ } -+ } -+ -+ /* -+ * wait till DATA0/1 is cleared -+ */ -+ for (i = 0; i < RENESAS_RETRY; i++) { -+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB, -+ &status); -+ if (err) -+ goto remove_bypass; -+ if (!(status & (BIT(0) | BIT(1)))) -+ break; -+ -+ udelay(RENESAS_DELAY); -+ } -+ if (i == RENESAS_RETRY) { -+ dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n"); -+ goto remove_bypass; -+ } -+ -+ /* 17. Remove bypass */ -+ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0); -+ if (err) -+ return false; -+ -+ udelay(10); -+ -+ /* 18. check result */ -+ for (i = 0; i < RENESAS_RETRY; i++) { -+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); -+ if (err) { -+ dev_err(&pdev->dev, "Read ROM status failed:%d\n", -+ pcibios_err_to_errno(err)); -+ return false; -+ } -+ status &= RENESAS_ROM_STATUS_RESULT; -+ if (status == RENESAS_ROM_STATUS_SUCCESS) { -+ dev_dbg(&pdev->dev, "Download ROM success\n"); -+ break; -+ } -+ udelay(RENESAS_DELAY); -+ } -+ if (i == RENESAS_RETRY) { /* Timed out */ -+ dev_err(&pdev->dev, -+ "Download to external ROM TO: %x\n", status); -+ return false; -+ } -+ -+ dev_dbg(&pdev->dev, "Download to external ROM scuceeded\n"); -+ -+ /* Last step set Reload */ -+ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, -+ RENESAS_ROM_STATUS_RELOAD); -+ if (err) { -+ dev_err(&pdev->dev, "Set ROM execute failed: %d\n", -+ pcibios_err_to_errno(err)); -+ return false; -+ } -+ -+ /* -+ * wait till Reload is cleared -+ */ -+ for (i = 0; i < RENESAS_RETRY; i++) { -+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); -+ if (err) -+ return false; -+ if (!(status & RENESAS_ROM_STATUS_RELOAD)) -+ break; -+ -+ udelay(RENESAS_DELAY); -+ } -+ if (i == RENESAS_RETRY) { -+ dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status); -+ return false; -+ } -+ -+ return true; -+ -+remove_bypass: -+ pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0); -+ return false; -+} -+ -+static void renesas_fw_callback(const struct firmware *fw, -+ void *context) -+{ -+ struct renesas_fw_ctx *ctx = context; -+ struct pci_dev *pdev = ctx->pdev; -+ struct device *parent = pdev->dev.parent; -+ const struct renesas_fw_entry *next_entry; -+ bool rom; -+ int err; -+ -+ if (!fw) { -+ dev_err(&pdev->dev, "firmware failed to load\n"); -+ /* -+ * we didn't find firmware, check if we have another -+ * entry for this device -+ */ -+ next_entry = renesas_get_next_entry(ctx->pdev, ctx->entry); -+ if (next_entry) { -+ ctx->entry = next_entry; -+ dev_dbg(&pdev->dev, "Found next entry, requesting: %s\n", -+ next_entry->firmware_name); -+ request_firmware_nowait(THIS_MODULE, 1, -+ next_entry->firmware_name, -+ &pdev->dev, GFP_KERNEL, -+ ctx, renesas_fw_callback); -+ return; -+ } else { -+ goto cleanup; -+ } -+ } -+ -+ err = renesas_fw_verify(pdev, fw->data, fw->size); -+ if (err) -+ goto cleanup; -+ -+ /* Check if the device has external ROM */ -+ rom = renesas_check_rom(pdev); -+ if (rom) { -+ /* perfrom chip erase first */ -+ renesas_rom_erase(pdev); -+ -+ /* lets try loading fw on ROM first */ -+ rom = renesas_setup_rom(pdev, fw); -+ if (!rom) { -+ dev_err(&pdev->dev, -+ "ROM load failed, falling back on FW load\n"); -+ } else { -+ dev_dbg(&pdev->dev, "ROM load done..\n"); -+ -+ release_firmware(fw); -+ goto do_probe; -+ } -+ } -+ -+ err = renesas_fw_download(pdev, fw); -+ release_firmware(fw); -+ if (err) { -+ dev_err(&pdev->dev, "firmware failed to download (%d).", err); -+ goto cleanup; -+ } -+ -+do_probe: -+ if (ctx->resume) -+ return; -+ -+ err = xhci_pci_probe(pdev, ctx->id); -+ if (!err) { -+ /* everything worked */ -+ devm_kfree(&pdev->dev, ctx); -+ return; -+ } -+ -+cleanup: -+ /* in case of an error - fall through */ -+ dev_info(&pdev->dev, "Unloading driver"); -+ -+ if (parent) -+ device_lock(parent); -+ -+ device_release_driver(&pdev->dev); -+ -+ if (parent) -+ device_unlock(parent); -+ -+ pci_dev_put(pdev); -+} -+ -+static int renesas_fw_alive_check(struct pci_dev *pdev) -+{ -+ const struct renesas_fw_entry *entry; -+ -+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */ -+ entry = renesas_needs_fw_dl(pdev); -+ if (!entry) -+ return 0; -+ -+ return renesas_fw_check_running(pdev); -+} -+ -+static int renesas_fw_download_to_hw(struct pci_dev *pdev, -+ const struct pci_device_id *id, -+ bool do_resume) -+{ -+ const struct renesas_fw_entry *entry; -+ struct renesas_fw_ctx *ctx; -+ int err; -+ -+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */ -+ entry = renesas_needs_fw_dl(pdev); -+ if (!entry) -+ return 0; -+ -+ err = renesas_fw_check_running(pdev); -+ /* Continue ahead, if the firmware is already running. */ -+ if (err == 0) -+ return 0; -+ -+ if (err != 1) -+ return err; -+ -+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); -+ if (!ctx) -+ return -ENOMEM; -+ ctx->pdev = pdev; -+ ctx->resume = do_resume; -+ ctx->id = id; -+ ctx->entry = entry; -+ -+ pci_dev_get(pdev); -+ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name, -+ &pdev->dev, GFP_KERNEL, -+ ctx, renesas_fw_callback); -+ if (err) { -+ pci_dev_put(pdev); -+ return err; -+ } -+ -+ /* -+ * The renesas_fw_callback() callback will continue the probe -+ * process, once it aquires the firmware. -+ */ -+ return 1; -+} -+ -+static int renesas_check_if_fw_dl_is_needed(struct pci_dev *pdev) -+{ -+ int err; -+ u8 fw_state; -+ -+ /* -+ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A -+ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which -+ * need a firmware in order to work. -+ * -+ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. -+ * - uPD720201 ES 2.0 sample whose revision ID is 2. -+ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. -+ */ -+ if (!((pdev->vendor == PCI_VENDOR_ID_RENESAS) && -+ ((pdev->device == 0x0015 && pdev->revision == 0x02) || -+ (pdev->device == 0x0014 && -+ (pdev->revision == 0x02 || pdev->revision == 0x03))))) -+ return 0; -+ -+ /* Check if device has ROM and loaded, if so skip everything */ -+ err = renesas_check_rom_state(pdev); -+ if (!err) -+ return err; -+ -+ /* -+ * Test if the firmware was uploaded and is running. -+ * As most BIOSes will initialize the device for us. -+ */ -+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state); -+ if (err) -+ return pcibios_err_to_errno(err); -+ -+ /* Check the "Result Code" Bits (6:4) and act accordingly */ -+ switch (fw_state & RENESAS_FW_STATUS_RESULT) { -+ case 0: /* No result yet */ -+ dev_err(&pdev->dev, "FW is not ready/loaded yet."); -+ return -ENODEV; -+ -+ case RENESAS_FW_STATUS_SUCCESS: -+ dev_dbg(&pdev->dev, "FW is ready."); -+ return 0; -+ -+ case RENESAS_FW_STATUS_ERROR: -+ dev_err(&pdev->dev, "HW is in an error state."); -+ return -ENODEV; -+ -+ default: /* All other states are marked as "Reserved states" */ -+ dev_err(&pdev->dev, "HW is in an invalid state (%x).", -+ (fw_state & 0x70) >> 4); -+ return -EINVAL; -+ } -+} -+ - /* called during probe() after chip reset completes */ - static int xhci_pci_setup(struct usb_hcd *hcd) - { -@@ -368,6 +1275,27 @@ static int xhci_pci_probe(struct pci_dev - struct hc_driver *driver; - struct usb_hcd *hcd; - -+ /* -+ * Check if this device is a RENESAS uPD720201/2 device. -+ * Otherwise, we can continue with xhci_pci_probe as usual. -+ */ -+ retval = renesas_fw_download_to_hw(dev, id, false); -+ switch (retval) { -+ case 0: -+ break; -+ -+ case 1: /* let it load the firmware and recontinue the probe. */ -+ return 0; -+ -+ default: -+ return retval; -+ }; -+ -+ /* Check if this device is a RENESAS uPD720201/2 device. */ -+ retval = renesas_check_if_fw_dl_is_needed(dev); -+ if (retval) -+ return retval; -+ - driver = (struct hc_driver *)id->driver_data; - - /* Prevent runtime suspending between USB-2 and USB-3 initialization */ -@@ -429,6 +1357,16 @@ static void xhci_pci_remove(struct pci_d - { - struct xhci_hcd *xhci; - -+ if (renesas_fw_alive_check(dev)) { -+ /* -+ * bail out early, if this was a renesas device w/o FW. -+ * Else we might hit the NMI watchdog in xhci_handsake -+ * during xhci_reset as part of the driver's unloading. -+ * which we forced in the renesas_fw_callback(). -+ */ -+ return; -+ } -+ - xhci = hcd_to_xhci(pci_get_drvdata(dev)); - xhci->xhc_state |= XHCI_STATE_REMOVING; - -@@ -568,6 +1506,11 @@ static int xhci_pci_resume(struct usb_hc - if (pdev->vendor == PCI_VENDOR_ID_INTEL) - usb_enable_intel_xhci_ports(pdev); - -+ /* Check if this device is a RENESAS uPD720201/2 device. */ -+ retval = renesas_check_if_fw_dl_is_needed(pdev); -+ if (retval) -+ return retval; -+ - if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) - xhci_ssic_port_unused_quirk(hcd, false); - diff --git a/target/linux/apm821xx/patches-5.4/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-5.4/802-usb-xhci-force-msi-renesas-xhci.patch deleted file mode 100644 index 1fe38dc60a..0000000000 --- a/target/linux/apm821xx/patches-5.4/802-usb-xhci-force-msi-renesas-xhci.patch +++ /dev/null @@ -1,53 +0,0 @@ -From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 23 Jun 2016 20:28:20 +0200 -Subject: [PATCH] usb: xhci: force MSI for uPD720201 and - uPD720202 - -The APM82181 does not support MSI-X. When probed, it will -produce a noisy warning. - ---- - drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 362 insertions(+) - ---- a/drivers/usb/host/xhci-pci.c -+++ b/drivers/usb/host/xhci-pci.c -@@ -297,6 +297,7 @@ static void xhci_pci_quirks(struct devic - pdev->device == 0x0015) { - xhci->quirks |= XHCI_RESET_ON_RESUME; - xhci->quirks |= XHCI_ZERO_64B_REGS; -+ xhci->quirks |= XHCI_FORCE_MSI; - } - if (pdev->vendor == PCI_VENDOR_ID_VIA) - xhci->quirks |= XHCI_RESET_ON_RESUME; ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -427,10 +427,14 @@ static int xhci_try_enable_msi(struct us - free_irq(hcd->irq, hcd); - hcd->irq = 0; - -- ret = xhci_setup_msix(xhci); -- if (ret) -- /* fall back to msi*/ -+ if (xhci->quirks & XHCI_FORCE_MSI) { - ret = xhci_setup_msi(xhci); -+ } else { -+ ret = xhci_setup_msix(xhci); -+ if (ret) -+ /* fall back to msi*/ -+ ret = xhci_setup_msi(xhci); -+ } - - if (!ret) { - hcd->msi_enabled = 1; ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -1887,6 +1887,7 @@ struct xhci_hcd { - struct xhci_hub usb2_rhub; - struct xhci_hub usb3_rhub; - /* support xHCI 1.0 spec USB2 hardware LPM */ -+#define XHCI_FORCE_MSI (1 << 24) - unsigned hw_lpm_support:1; - /* Broken Suspend flag for SNPS Suspend resume issue */ - unsigned broken_suspend:1; diff --git a/target/linux/apm821xx/patches-5.4/803-hwmon-tc654-add-detection-routine.patch b/target/linux/apm821xx/patches-5.4/803-hwmon-tc654-add-detection-routine.patch deleted file mode 100644 index f0ed5a7cff..0000000000 --- a/target/linux/apm821xx/patches-5.4/803-hwmon-tc654-add-detection-routine.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 17 Dec 2017 17:27:15 +0100 -Subject: [PATCH 1/2] hwmon: tc654 add detection routine - -This patch adds a detection routine for the TC654/TC655 -chips. Both IDs are listed in the Datasheet. - -Signed-off-by: Christian Lamparter ---- - drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++ - 1 file changed, 29 insertions(+) - ---- a/drivers/hwmon/tc654.c -+++ b/drivers/hwmon/tc654.c -@@ -55,6 +55,11 @@ enum tc654_regs { - /* Register data is read (and cached) at most once per second. */ - #define TC654_UPDATE_INTERVAL HZ - -+/* Manufacturer and Version Identification Register Values */ -+#define TC654_MFR_ID_MICROCHIP 0x84 -+#define TC654_VER_ID 0x00 -+#define TC655_VER_ID 0x01 -+ - struct tc654_data { - struct i2c_client *client; - -@@ -482,6 +487,29 @@ static const struct i2c_device_id tc654_ - {} - }; - -+static int -+tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info) -+{ -+ struct i2c_adapter *adapter = new_client->adapter; -+ int manufacturer, product; -+ -+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) -+ return -ENODEV; -+ -+ manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID); -+ if (manufacturer != TC654_MFR_ID_MICROCHIP) -+ return -ENODEV; -+ -+ product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID); -+ if (!((product == TC654_VER_ID) || (product == TC655_VER_ID))) -+ return -ENODEV; -+ -+ strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655", -+ I2C_NAME_SIZE); -+ return 0; -+} -+ -+ - MODULE_DEVICE_TABLE(i2c, tc654_id); - - static struct i2c_driver tc654_driver = { -@@ -490,6 +518,7 @@ static struct i2c_driver tc654_driver = - }, - .probe = tc654_probe, - .id_table = tc654_id, -+ .detect = tc654_detect, - }; - - module_i2c_driver(tc654_driver); diff --git a/target/linux/apm821xx/patches-5.4/804-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-5.4/804-hwmon-tc654-add-thermal_cooling-device.patch deleted file mode 100644 index a7b0a58f7c..0000000000 --- a/target/linux/apm821xx/patches-5.4/804-hwmon-tc654-add-thermal_cooling-device.patch +++ /dev/null @@ -1,174 +0,0 @@ -From 9cb27801b5cbad2e1aaf45aac428cb2fac5e1372 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 17 Dec 2017 17:29:13 +0100 -Subject: [PATCH] hwmon: tc654: add thermal_cooling device - -This patch adds a thermaL_cooling device to the tc654 driver. -This allows the chip to be used for DT-based cooling. - -Signed-off-by: Christian Lamparter ---- - drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++------- - 1 file changed, 86 insertions(+), 17 deletions(-) - ---- a/drivers/hwmon/tc654.c -+++ b/drivers/hwmon/tc654.c -@@ -15,6 +15,7 @@ - #include - #include - #include -+#include - #include - - enum tc654_regs { -@@ -132,6 +133,9 @@ struct tc654_data { - * writable register used to control the duty - * cycle of the V OUT output. - */ -+ -+ /* optional cooling device */ -+ struct thermal_cooling_device *cdev; - }; - - /* helper to grab and cache data, at most one time per second */ -@@ -367,36 +371,30 @@ static ssize_t pwm_mode_store(struct dev - static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160, - 172, 184, 196, 207, 219, 231, 243, 255}; - -+static int get_pwm(struct tc654_data *data) -+{ -+ if (data->config & TC654_REG_CONFIG_SDM) -+ return 0; -+ else -+ return tc654_pwm_map[data->duty_cycle]; -+} -+ - static ssize_t pwm_show(struct device *dev, struct device_attribute *da, - char *buf) - { - struct tc654_data *data = tc654_update_client(dev); -- int pwm; - - if (IS_ERR(data)) - return PTR_ERR(data); - -- if (data->config & TC654_REG_CONFIG_SDM) -- pwm = 0; -- else -- pwm = tc654_pwm_map[data->duty_cycle]; -- -- return sprintf(buf, "%d\n", pwm); -+ return sprintf(buf, "%d\n", get_pwm(data)); - } - --static ssize_t pwm_store(struct device *dev, struct device_attribute *da, -- const char *buf, size_t count) -+static int _set_pwm(struct tc654_data *data, unsigned long val) - { -- struct tc654_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; -- unsigned long val; - int ret; - -- if (kstrtoul(buf, 10, &val)) -- return -EINVAL; -- if (val > 255) -- return -EINVAL; -- - mutex_lock(&data->update_lock); - - if (val == 0) -@@ -416,6 +414,22 @@ static ssize_t pwm_store(struct device * - - out: - mutex_unlock(&data->update_lock); -+ return ret; -+} -+ -+static ssize_t pwm_store(struct device *dev, struct device_attribute *da, -+ const char *buf, size_t count) -+{ -+ struct tc654_data *data = dev_get_drvdata(dev); -+ unsigned long val; -+ int ret; -+ -+ if (kstrtoul(buf, 10, &val)) -+ return -EINVAL; -+ if (val > 255) -+ return -EINVAL; -+ -+ ret = _set_pwm(data, val); - return ret < 0 ? ret : count; - } - -@@ -447,6 +461,47 @@ static struct attribute *tc654_attrs[] = - - ATTRIBUTE_GROUPS(tc654); - -+/* cooling device */ -+ -+static int tc654_get_max_state(struct thermal_cooling_device *cdev, -+ unsigned long *state) -+{ -+ *state = 255; -+ return 0; -+} -+ -+static int tc654_get_cur_state(struct thermal_cooling_device *cdev, -+ unsigned long *state) -+{ -+ struct tc654_data *data = tc654_update_client(cdev->devdata); -+ -+ if (IS_ERR(data)) -+ return PTR_ERR(data); -+ -+ *state = get_pwm(data); -+ return 0; -+} -+ -+static int tc654_set_cur_state(struct thermal_cooling_device *cdev, -+ unsigned long state) -+{ -+ struct tc654_data *data = tc654_update_client(cdev->devdata); -+ -+ if (IS_ERR(data)) -+ return PTR_ERR(data); -+ -+ if (state > 255) -+ return -EINVAL; -+ -+ return _set_pwm(data, state); -+} -+ -+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = { -+ .get_max_state = tc654_get_max_state, -+ .get_cur_state = tc654_get_cur_state, -+ .set_cur_state = tc654_set_cur_state, -+}; -+ - /* - * device probe and removal - */ -@@ -478,7 +533,21 @@ static int tc654_probe(struct i2c_client - hwmon_dev = - devm_hwmon_device_register_with_groups(dev, client->name, data, - tc654_groups); -- return PTR_ERR_OR_ZERO(hwmon_dev); -+ if (IS_ERR(hwmon_dev)) -+ return PTR_ERR(hwmon_dev); -+ -+#if IS_ENABLED(CONFIG_OF) -+ /* Optional cooling device register for Device tree platforms */ -+ data->cdev = thermal_of_cooling_device_register(client->dev.of_node, -+ "tc654", hwmon_dev, -+ &tc654_fan_cool_ops); -+#else /* CONFIG_OF */ -+ /* Optional cooling device register for non Device tree platforms */ -+ data->cdev = thermal_cooling_device_register("tc654", hwmon_dev, -+ &tc654_fan_cool_ops); -+#endif /* CONFIG_OF */ -+ -+ return PTR_ERR_OR_ZERO(data->cdev); - } - - static const struct i2c_device_id tc654_id[] = { diff --git a/target/linux/apm821xx/patches-5.4/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch b/target/linux/apm821xx/patches-5.4/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch deleted file mode 100644 index c2cc632693..0000000000 --- a/target/linux/apm821xx/patches-5.4/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch +++ /dev/null @@ -1,29 +0,0 @@ -From c9395ad54e2cabb87d408becc37566f3d8248933 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 1 Dec 2019 02:08:23 +0100 -Subject: [PATCH] powerpc: bootwrapper: force gzip as mkimage's compression - method - -Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to -instruct the mkimage to use the xz compression, which isn't -supported. This patch forces the gzip compression, which is -supported and doesn't matter because the generated uImage for -the apm821xx target gets ignored as the OpenWrt toolchain will -do separate U-Boot kernel images for each device individually. - -Signed-off-by: Christian Lamparter ---- - arch/powerpc/boot/Makefile | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -254,7 +254,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo - - # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd - quiet_cmd_wrap = WRAP $@ -- cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ -+ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z gzip -c -o $@ -p $2 \ - $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ - vmlinux -