From: John Crispin <john@openwrt.org>
Date: Wed, 28 Jan 2015 19:19:47 +0000 (+0000)
Subject: ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address
X-Git-Tag: reboot~4506
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=259244624bae08f6ca396dca7f1ffde6d4110649;p=openwrt%2Fstaging%2Fblogic.git

ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address

Fix the WLAN MAC address to match the one printed on the label by using the
correct address from the ART instead of the address of the LAN interface.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44183
---

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
index 425be301e093..e55a43f9c76f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
@@ -38,6 +38,8 @@
 #define DIR_615C1_CONFIG_ADDR		0x1f020000
 #define DIR_615C1_CONFIG_SIZE		0x10000
 
+#define DIR_615C1_WLAN_MAC_ADDR		0x1f3fffb4
+
 static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
 	{
 		.name		= "d-link:orange:status",
@@ -96,16 +98,16 @@ static void __init dir_615c1_setup(void)
 {
 	const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
 	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 mac[6];
-	u8 *wlan_mac = NULL;
+	u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN];
 
 	if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
 				       "lan_mac=", mac) == 0) {
 		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
 		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-		wlan_mac = mac;
 	}
 
+	ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615C1_WLAN_MAC_ADDR), wlan_mac);
+
 	ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
 
 	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;