From: Daniel Golle <daniel@makrotopia.org>
Date: Thu, 5 Dec 2019 17:22:55 +0000 (+0100)
Subject: mac80211: track unmanaged interfaces
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2568db3fff7be1be848d490a7f53af42ec14b257;p=openwrt%2Fstaging%2Frmilecki.git

mac80211: track unmanaged interfaces

In addition to wpa_supplicant and hostapd managed interfaces, also
track unmanaged interfaces. This is used to make sure that running
'wifi' always returns into a clean state regardless of what the user
did before.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---

diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
index 91d50c35375..dd2b09c4a00 100644
--- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
+++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
@@ -19,6 +19,8 @@ NEWAPLIST=
 OLDAPLIST=
 NEWSPLIST=
 OLDSPLIST=
+NEWUMLIST=
+OLDUMLIST=
 
 drv_mac80211_init_device_config() {
 	hostapd_common_add_device_config
@@ -666,6 +668,8 @@ mac80211_setup_adhoc() {
 	local enable=$1
 	json_get_vars bssid ssid key mcast_rate
 
+	NEWUMLIST="${NEWUMLIST}$ifname "
+
 	[ "$enable" = 0 ] && {
 		ip link set dev "$ifname" down
 		return 0
@@ -712,6 +716,8 @@ mac80211_setup_mesh() {
 	local enable=$1
 	json_get_vars ssid mesh_id mcast_rate
 
+	NEWUMLIST="${NEWUMLIST}$ifname "
+
 	[ "$enable" = 0 ] && {
 		ip link set dev "$ifname" down
 		return 0
@@ -800,7 +806,7 @@ mac80211_vap_cleanup() {
 	local vaps="$2"
 
 	for wdev in $vaps; do
-		ubus call ${service}.${phy} config_remove "{\"iface\":\"$wdev\"}"
+		[ "$service" != "none" ] && ubus call ${service}.${phy} config_remove "{\"iface\":\"$wdev\"}"
 		ip link set dev "$wdev" down 2>/dev/null
 		iw dev "$wdev" del
 	done
@@ -813,6 +819,7 @@ mac80211_interface_cleanup() {
 
 	mac80211_vap_cleanup hostapd "${primary_ap}"
 	mac80211_vap_cleanup wpa_supplicant "$(uci -q -P /var/state get wireless._${phy}.splist)"
+	mac80211_vap_cleanup none "$(uci -q -P /var/state get wireless._${phy}.umlist)"
 }
 
 mac80211_set_noscan() {
@@ -845,6 +852,28 @@ drv_mac80211_setup() {
 		wireless_set_data phy="$phy"
 	}
 
+	OLDAPLIST=$(uci -q -P /var/state get wireless._${phy}.aplist)
+	OLDSPLIST=$(uci -q -P /var/state get wireless._${phy}.splist)
+	OLDUMLIST=$(uci -q -P /var/state get wireless._${phy}.umlist)
+
+	local wdev
+	local cwdev
+	local found
+
+	for wdev in $(list_phy_interfaces "$phy"); do
+		found=0
+		for cwdev in $OLDAPLIST $OLDSPLIST $OLDUMLIST; do
+			if [ "$wdev" = "$cwdev" ]; then
+				found=1
+				break
+			fi
+		done
+		if [ "$found" = "0" ]; then
+			ip link set dev "$wdev" down
+			iw dev "$wdev" del
+		fi
+	done
+
 	# convert channel to frequency
 	[ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel")"
 
@@ -896,7 +925,6 @@ drv_mac80211_setup() {
 	for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
 	NEWAPLIST=
 	for_each_interface "ap" mac80211_prepare_vif
-	OLDAPLIST=$(uci -q -P /var/state get wireless._${phy}.aplist)
 	NEW_MD5=$(md5sum ${hostapd_conf_file})
 	OLD_MD5=$(uci -q -P /var/state get wireless._${phy}.md5)
 	if [ "${NEWAPLIST}" != "${OLDAPLIST}" ]; then
@@ -927,10 +955,12 @@ drv_mac80211_setup() {
 	for_each_interface "ap" mac80211_setup_vif
 
 	NEWSPLIST=
-	OLDSPLIST=$(uci -q -P /var/state get wireless._${phy}.splist)
+	NEWUMLIST=
+
 	for_each_interface "sta adhoc mesh monitor" mac80211_setup_vif
 
 	uci -q -P /var/state set wireless._${phy}.splist="${NEWSPLIST}"
+	uci -q -P /var/state set wireless._${phy}.umlist="${NEWUMLIST}"
 
 	local foundvap
 	local dropvap=""
@@ -945,6 +975,15 @@ drv_mac80211_setup() {
 	wireless_set_up
 }
 
+list_phy_interfaces() {
+	local phy="$1"
+	if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
+		ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
+	else
+		ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
+	fi
+}
+
 drv_mac80211_teardown() {
 	wireless_process_kill_all