From: Paul Burton Date: Mon, 14 Apr 2014 11:04:27 +0000 (+0100) Subject: MIPS: smp-cps: rework core/VPE initialisation X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=245a7868d2f2e54a9a9b084de00d003a9badb2a5;p=openwrt%2Fstaging%2Fblogic.git MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton --- diff --git a/arch/mips/include/asm/smp-cps.h b/arch/mips/include/asm/smp-cps.h index d60d1a2180d1..d49279e92eb5 100644 --- a/arch/mips/include/asm/smp-cps.h +++ b/arch/mips/include/asm/smp-cps.h @@ -13,17 +13,23 @@ #ifndef __ASSEMBLY__ -struct boot_config { - unsigned int core; - unsigned int vpe; +struct vpe_boot_config { unsigned long pc; unsigned long sp; unsigned long gp; }; -extern struct boot_config mips_cps_bootcfg; +struct core_boot_config { + atomic_t vpe_mask; + struct vpe_boot_config *vpe_config; +}; + +extern struct core_boot_config *mips_cps_core_bootcfg; extern void mips_cps_core_entry(void); +extern void mips_cps_core_init(void); + +extern struct vpe_boot_config *mips_cps_boot_vpes(void); #else /* __ASSEMBLY__ */ diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index e085cde13dba..d63490d8c26e 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -487,10 +487,14 @@ void output_kvm_defines(void) void output_cps_defines(void) { COMMENT(" MIPS CPS offsets. "); - OFFSET(BOOTCFG_CORE, boot_config, core); - OFFSET(BOOTCFG_VPE, boot_config, vpe); - OFFSET(BOOTCFG_PC, boot_config, pc); - OFFSET(BOOTCFG_SP, boot_config, sp); - OFFSET(BOOTCFG_GP, boot_config, gp); + + OFFSET(COREBOOTCFG_VPEMASK, core_boot_config, vpe_mask); + OFFSET(COREBOOTCFG_VPECONFIG, core_boot_config, vpe_config); + DEFINE(COREBOOTCFG_SIZE, sizeof(struct core_boot_config)); + + OFFSET(VPEBOOTCFG_PC, vpe_boot_config, pc); + OFFSET(VPEBOOTCFG_SP, vpe_boot_config, sp); + OFFSET(VPEBOOTCFG_GP, vpe_boot_config, gp); + DEFINE(VPEBOOTCFG_SIZE, sizeof(struct vpe_boot_config)); } #endif diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index f7a46db4b161..57ec18c7d17f 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -14,12 +14,33 @@ #include #include #include +#include -#define GCR_CL_COHERENCE_OFS 0x2008 +#define GCR_CL_COHERENCE_OFS 0x2008 +#define GCR_CL_ID_OFS 0x2028 + +.extern mips_cm_base + +.set noreorder + + /* + * Set dest to non-zero if the core supports the MT ASE, else zero. If + * MT is not supported then branch to nomt. + */ + .macro has_mt dest, nomt + mfc0 \dest, CP0_CONFIG + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 1 + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 2 + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 3 + andi \dest, \dest, MIPS_CONF3_MT + beqz \dest, \nomt + .endm .section .text.cps-vec .balign 0x1000 -.set noreorder LEAF(mips_cps_core_entry) /* @@ -134,21 +155,24 @@ dcache_done: jr t0 nop -1: /* We're up, cached & coherent */ + /* + * We're up, cached & coherent. Perform any further required core-level + * initialisation. + */ +1: jal mips_cps_core_init + nop /* - * TODO: We should check the VPE number we intended to boot here, and - * if non-zero we should start that VPE and stop this one. For - * the moment this doesn't matter since CPUs are brought up - * sequentially and in order, but once hotplug is implemented - * this will need revisiting. + * Boot any other VPEs within this core that should be online, and + * deactivate this VPE if it should be offline. */ + jal mips_cps_boot_vpes + nop /* Off we go! */ - la t0, mips_cps_bootcfg - lw t1, BOOTCFG_PC(t0) - lw gp, BOOTCFG_GP(t0) - lw sp, BOOTCFG_SP(t0) + lw t1, VPEBOOTCFG_PC(v0) + lw gp, VPEBOOTCFG_GP(v0) + lw sp, VPEBOOTCFG_SP(v0) jr t1 nop END(mips_cps_core_entry) @@ -189,3 +213,237 @@ LEAF(excep_ejtag) jr k0 nop END(excep_ejtag) + +LEAF(mips_cps_core_init) +#ifdef CONFIG_MIPS_MT + /* Check that the core implements the MT ASE */ + has_mt t0, 3f + nop + + .set push + .set mt + + /* Only allow 1 TC per VPE to execute... */ + dmt + + /* ...and for the moment only 1 VPE */ + dvpe + la t1, 1f + jr.hb t1 + nop + + /* Enter VPE configuration state */ +1: mfc0 t0, CP0_MVPCONTROL + ori t0, t0, MVPCONTROL_VPC + mtc0 t0, CP0_MVPCONTROL + + /* Retrieve the number of VPEs within the core */ + mfc0 t0, CP0_MVPCONF0 + srl t0, t0, MVPCONF0_PVPE_SHIFT + andi t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT) + addi t7, t0, 1 + + /* If there's only 1, we're done */ + beqz t0, 2f + nop + + /* Loop through each VPE within this core */ + li t5, 1 + +1: /* Operate on the appropriate TC */ + mtc0 t5, CP0_VPECONTROL + ehb + + /* Bind TC to VPE (1:1 TC:VPE mapping) */ + mttc0 t5, CP0_TCBIND + + /* Set exclusive TC, non-active, master */ + li t0, VPECONF0_MVP + sll t1, t5, VPECONF0_XTC_SHIFT + or t0, t0, t1 + mttc0 t0, CP0_VPECONF0 + + /* Set TC non-active, non-allocatable */ + mttc0 zero, CP0_TCSTATUS + + /* Set TC halted */ + li t0, TCHALT_H + mttc0 t0, CP0_TCHALT + + /* Next VPE */ + addi t5, t5, 1 + slt t0, t5, t7 + bnez t0, 1b + nop + + /* Leave VPE configuration state */ +2: mfc0 t0, CP0_MVPCONTROL + xori t0, t0, MVPCONTROL_VPC + mtc0 t0, CP0_MVPCONTROL + +3: .set pop +#endif + jr ra + nop + END(mips_cps_core_init) + +LEAF(mips_cps_boot_vpes) + /* Retrieve CM base address */ + la t0, mips_cm_base + lw t0, 0(t0) + + /* Calculate a pointer to this cores struct core_boot_config */ + lw t0, GCR_CL_ID_OFS(t0) + li t1, COREBOOTCFG_SIZE + mul t0, t0, t1 + la t1, mips_cps_core_bootcfg + lw t1, 0(t1) + addu t0, t0, t1 + + /* Calculate this VPEs ID. If the core doesn't support MT use 0 */ + has_mt t6, 1f + li t9, 0 + + /* Find the number of VPEs present in the core */ + mfc0 t1, CP0_MVPCONF0 + srl t1, t1, MVPCONF0_PVPE_SHIFT + andi t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT + addi t1, t1, 1 + + /* Calculate a mask for the VPE ID from EBase.CPUNum */ + clz t1, t1 + li t2, 31 + subu t1, t2, t1 + li t2, 1 + sll t1, t2, t1 + addiu t1, t1, -1 + + /* Retrieve the VPE ID from EBase.CPUNum */ + mfc0 t9, $15, 1 + and t9, t9, t1 + +1: /* Calculate a pointer to this VPEs struct vpe_boot_config */ + li t1, VPEBOOTCFG_SIZE + mul v0, t9, t1 + lw t7, COREBOOTCFG_VPECONFIG(t0) + addu v0, v0, t7 + +#ifdef CONFIG_MIPS_MT + + /* If the core doesn't support MT then return */ + bnez t6, 1f + nop + jr ra + nop + + .set push + .set mt + +1: /* Enter VPE configuration state */ + dvpe + la t1, 1f + jr.hb t1 + nop +1: mfc0 t1, CP0_MVPCONTROL + ori t1, t1, MVPCONTROL_VPC + mtc0 t1, CP0_MVPCONTROL + ehb + + /* Loop through each VPE */ + lw t6, COREBOOTCFG_VPEMASK(t0) + move t8, t6 + li t5, 0 + + /* Check whether the VPE should be running. If not, skip it */ +1: andi t0, t6, 1 + beqz t0, 2f + nop + + /* Operate on the appropriate TC */ + mfc0 t0, CP0_VPECONTROL + ori t0, t0, VPECONTROL_TARGTC + xori t0, t0, VPECONTROL_TARGTC + or t0, t0, t5 + mtc0 t0, CP0_VPECONTROL + ehb + + /* Skip the VPE if its TC is not halted */ + mftc0 t0, CP0_TCHALT + beqz t0, 2f + nop + + /* Calculate a pointer to the VPEs struct vpe_boot_config */ + li t0, VPEBOOTCFG_SIZE + mul t0, t0, t5 + addu t0, t0, t7 + + /* Set the TC restart PC */ + lw t1, VPEBOOTCFG_PC(t0) + mttc0 t1, CP0_TCRESTART + + /* Set the TC stack pointer */ + lw t1, VPEBOOTCFG_SP(t0) + mttgpr t1, sp + + /* Set the TC global pointer */ + lw t1, VPEBOOTCFG_GP(t0) + mttgpr t1, gp + + /* Copy config from this VPE */ + mfc0 t0, CP0_CONFIG + mttc0 t0, CP0_CONFIG + + /* Ensure no software interrupts are pending */ + mttc0 zero, CP0_CAUSE + mttc0 zero, CP0_STATUS + + /* Set TC active, not interrupt exempt */ + mftc0 t0, CP0_TCSTATUS + li t1, ~TCSTATUS_IXMT + and t0, t0, t1 + ori t0, t0, TCSTATUS_A + mttc0 t0, CP0_TCSTATUS + + /* Clear the TC halt bit */ + mttc0 zero, CP0_TCHALT + + /* Set VPE active */ + mftc0 t0, CP0_VPECONF0 + ori t0, t0, VPECONF0_VPA + mttc0 t0, CP0_VPECONF0 + + /* Next VPE */ +2: srl t6, t6, 1 + addi t5, t5, 1 + bnez t6, 1b + nop + + /* Leave VPE configuration state */ + mfc0 t1, CP0_MVPCONTROL + xori t1, t1, MVPCONTROL_VPC + mtc0 t1, CP0_MVPCONTROL + ehb + evpe + + /* Check whether this VPE is meant to be running */ + li t0, 1 + sll t0, t0, t9 + and t0, t0, t8 + bnez t0, 2f + nop + + /* This VPE should be offline, halt the TC */ + li t0, TCHALT_H + mtc0 t0, CP0_TCHALT + la t0, 1f +1: jr.hb t0 + nop + +2: .set pop + +#endif /* CONFIG_MIPS_MT */ + + /* Return */ + jr ra + nop + END(mips_cps_boot_vpes) diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c index 2368fc5ccf1e..ba473608a347 100644 --- a/arch/mips/kernel/mips-cpc.c +++ b/arch/mips/kernel/mips-cpc.c @@ -9,6 +9,8 @@ */ #include +#include +#include #include #include diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c index 536eec0d21b6..af90e82f94bf 100644 --- a/arch/mips/kernel/smp-cps.c +++ b/arch/mips/kernel/smp-cps.c @@ -26,98 +26,37 @@ static DECLARE_BITMAP(core_power, NR_CPUS); -struct boot_config mips_cps_bootcfg; +struct core_boot_config *mips_cps_core_bootcfg; -static void init_core(void) +static unsigned core_vpe_count(unsigned core) { - unsigned int nvpes, t; - u32 mvpconf0, vpeconf0, vpecontrol, tcstatus, tcbind, status; + unsigned cfg; - if (!cpu_has_mipsmt) - return; - - /* Enter VPE configuration state */ - dvpe(); - set_c0_mvpcontrol(MVPCONTROL_VPC); - - /* Retrieve the count of VPEs in this core */ - mvpconf0 = read_c0_mvpconf0(); - nvpes = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; - smp_num_siblings = nvpes; - - for (t = 1; t < nvpes; t++) { - /* Use a 1:1 mapping of TC index to VPE index */ - settc(t); - - /* Bind 1 TC to this VPE */ - tcbind = read_tc_c0_tcbind(); - tcbind &= ~TCBIND_CURVPE; - tcbind |= t << TCBIND_CURVPE_SHIFT; - write_tc_c0_tcbind(tcbind); - - /* Set exclusive TC, non-active, master */ - vpeconf0 = read_vpe_c0_vpeconf0(); - vpeconf0 &= ~(VPECONF0_XTC | VPECONF0_VPA); - vpeconf0 |= t << VPECONF0_XTC_SHIFT; - vpeconf0 |= VPECONF0_MVP; - write_vpe_c0_vpeconf0(vpeconf0); - - /* Declare TC non-active, non-allocatable & interrupt exempt */ - tcstatus = read_tc_c0_tcstatus(); - tcstatus &= ~(TCSTATUS_A | TCSTATUS_DA); - tcstatus |= TCSTATUS_IXMT; - write_tc_c0_tcstatus(tcstatus); - - /* Halt the TC */ - write_tc_c0_tchalt(TCHALT_H); - - /* Allow only 1 TC to execute */ - vpecontrol = read_vpe_c0_vpecontrol(); - vpecontrol &= ~VPECONTROL_TE; - write_vpe_c0_vpecontrol(vpecontrol); - - /* Copy (most of) Status from VPE 0 */ - status = read_c0_status(); - status &= ~(ST0_IM | ST0_IE | ST0_KSU); - status |= ST0_CU0; - write_vpe_c0_status(status); - - /* Copy Config from VPE 0 */ - write_vpe_c0_config(read_c0_config()); - write_vpe_c0_config7(read_c0_config7()); - - /* Ensure no software interrupts are pending */ - write_vpe_c0_cause(0); - - /* Sync Count */ - write_vpe_c0_count(read_c0_count()); - } + if (!config_enabled(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt) + return 1; - /* Leave VPE configuration state */ - clear_c0_mvpcontrol(MVPCONTROL_VPC); + write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF); + cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE_MSK; + return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1; } static void __init cps_smp_setup(void) { unsigned int ncores, nvpes, core_vpes; int c, v; - u32 core_cfg, *entry_code; + u32 *entry_code; /* Detect & record VPE topology */ ncores = mips_cm_numcores(); pr_info("VPE topology "); for (c = nvpes = 0; c < ncores; c++) { - if (cpu_has_mipsmt && config_enabled(CONFIG_MIPS_MT_SMP)) { - write_gcr_cl_other(c << CM_GCR_Cx_OTHER_CORENUM_SHF); - core_cfg = read_gcr_co_config(); - core_vpes = ((core_cfg & CM_GCR_Cx_CONFIG_PVPE_MSK) >> - CM_GCR_Cx_CONFIG_PVPE_SHF) + 1; - } else { - core_vpes = 1; - } - + core_vpes = core_vpe_count(c); pr_cont("%c%u", c ? ',' : '{', core_vpes); + /* Use the number of VPEs in core 0 for smp_num_siblings */ + if (!c) + smp_num_siblings = core_vpes; + for (v = 0; v < min_t(int, core_vpes, NR_CPUS - nvpes); v++) { cpu_data[nvpes + v].core = c; #ifdef CONFIG_MIPS_MT_SMP @@ -140,12 +79,8 @@ static void __init cps_smp_setup(void) /* Core 0 is powered up (we're running on it) */ bitmap_set(core_power, 0, 1); - /* Disable MT - we only want to run 1 TC per VPE */ - if (cpu_has_mipsmt) - dmt(); - /* Initialise core 0 */ - init_core(); + mips_cps_core_init(); /* Patch the start of mips_cps_core_entry to provide the CM base */ entry_code = (u32 *)&mips_cps_core_entry; @@ -157,15 +92,60 @@ static void __init cps_smp_setup(void) static void __init cps_prepare_cpus(unsigned int max_cpus) { + unsigned ncores, core_vpes, c; + mips_mt_set_cpuoptions(); + + /* Allocate core boot configuration structs */ + ncores = mips_cm_numcores(); + mips_cps_core_bootcfg = kcalloc(ncores, sizeof(*mips_cps_core_bootcfg), + GFP_KERNEL); + if (!mips_cps_core_bootcfg) { + pr_err("Failed to allocate boot config for %u cores\n", ncores); + goto err_out; + } + + /* Allocate VPE boot configuration structs */ + for (c = 0; c < ncores; c++) { + core_vpes = core_vpe_count(c); + mips_cps_core_bootcfg[c].vpe_config = kcalloc(core_vpes, + sizeof(*mips_cps_core_bootcfg[c].vpe_config), + GFP_KERNEL); + if (!mips_cps_core_bootcfg[c].vpe_config) { + pr_err("Failed to allocate %u VPE boot configs\n", + core_vpes); + goto err_out; + } + } + + /* Mark this CPU as booted */ + atomic_set(&mips_cps_core_bootcfg[current_cpu_data.core].vpe_mask, + 1 << cpu_vpe_id(¤t_cpu_data)); + + return; +err_out: + /* Clean up allocations */ + if (mips_cps_core_bootcfg) { + for (c = 0; c < ncores; c++) + kfree(mips_cps_core_bootcfg[c].vpe_config); + kfree(mips_cps_core_bootcfg); + mips_cps_core_bootcfg = NULL; + } + + /* Effectively disable SMP by declaring CPUs not present */ + for_each_possible_cpu(c) { + if (c == 0) + continue; + set_cpu_present(c, false); + } } -static void boot_core(struct boot_config *cfg) +static void boot_core(unsigned core) { u32 access; /* Select the appropriate core */ - write_gcr_cl_other(cfg->core << CM_GCR_Cx_OTHER_CORENUM_SHF); + write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF); /* Set its reset vector */ write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry)); @@ -175,15 +155,12 @@ static void boot_core(struct boot_config *cfg) /* Ensure the core can access the GCRs */ access = read_gcr_access(); - access |= 1 << (CM_GCR_ACCESS_ACCESSEN_SHF + cfg->core); + access |= 1 << (CM_GCR_ACCESS_ACCESSEN_SHF + core); write_gcr_access(access); - /* Copy cfg */ - mips_cps_bootcfg = *cfg; - if (mips_cpc_present()) { /* Select the appropriate core */ - write_cpc_cl_other(cfg->core << CPC_Cx_OTHER_CORENUM_SHF); + write_cpc_cl_other(core << CPC_Cx_OTHER_CORENUM_SHF); /* Reset the core */ write_cpc_co_cmd(CPC_Cx_CMD_RESET); @@ -193,77 +170,47 @@ static void boot_core(struct boot_config *cfg) } /* The core is now powered up */ - bitmap_set(core_power, cfg->core, 1); + bitmap_set(core_power, core, 1); } -static void boot_vpe(void *info) +static void remote_vpe_boot(void *dummy) { - struct boot_config *cfg = info; - u32 tcstatus, vpeconf0; - - /* Enter VPE configuration state */ - dvpe(); - set_c0_mvpcontrol(MVPCONTROL_VPC); - - settc(cfg->vpe); - - /* Set the TC restart PC */ - write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); - - /* Activate the TC, allow interrupts */ - tcstatus = read_tc_c0_tcstatus(); - tcstatus &= ~TCSTATUS_IXMT; - tcstatus |= TCSTATUS_A; - write_tc_c0_tcstatus(tcstatus); - - /* Clear the TC halt bit */ - write_tc_c0_tchalt(0); - - /* Activate the VPE */ - vpeconf0 = read_vpe_c0_vpeconf0(); - vpeconf0 |= VPECONF0_VPA; - write_vpe_c0_vpeconf0(vpeconf0); - - /* Set the stack & global pointer registers */ - write_tc_gpr_sp(cfg->sp); - write_tc_gpr_gp(cfg->gp); - - /* Leave VPE configuration state */ - clear_c0_mvpcontrol(MVPCONTROL_VPC); - - /* Enable other VPEs to execute */ - evpe(EVPE_ENABLE); + mips_cps_boot_vpes(); } static void cps_boot_secondary(int cpu, struct task_struct *idle) { - struct boot_config cfg; + unsigned core = cpu_data[cpu].core; + unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]); + struct core_boot_config *core_cfg = &mips_cps_core_bootcfg[core]; + struct vpe_boot_config *vpe_cfg = &core_cfg->vpe_config[vpe_id]; unsigned int remote; int err; - cfg.core = cpu_data[cpu].core; - cfg.vpe = cpu_vpe_id(&cpu_data[cpu]); - cfg.pc = (unsigned long)&smp_bootstrap; - cfg.sp = __KSTK_TOS(idle); - cfg.gp = (unsigned long)task_thread_info(idle); + vpe_cfg->pc = (unsigned long)&smp_bootstrap; + vpe_cfg->sp = __KSTK_TOS(idle); + vpe_cfg->gp = (unsigned long)task_thread_info(idle); - if (!test_bit(cfg.core, core_power)) { + atomic_or(1 << cpu_vpe_id(&cpu_data[cpu]), &core_cfg->vpe_mask); + + if (!test_bit(core, core_power)) { /* Boot a VPE on a powered down core */ - boot_core(&cfg); + boot_core(core); return; } - if (cfg.core != current_cpu_data.core) { + if (core != current_cpu_data.core) { /* Boot a VPE on another powered up core */ for (remote = 0; remote < NR_CPUS; remote++) { - if (cpu_data[remote].core != cfg.core) + if (cpu_data[remote].core != core) continue; if (cpu_online(remote)) break; } BUG_ON(remote >= NR_CPUS); - err = smp_call_function_single(remote, boot_vpe, &cfg, 1); + err = smp_call_function_single(remote, remote_vpe_boot, + NULL, 1); if (err) panic("Failed to call remote CPU\n"); return; @@ -272,7 +219,7 @@ static void cps_boot_secondary(int cpu, struct task_struct *idle) BUG_ON(!cpu_has_mipsmt); /* Boot a VPE on this core */ - boot_vpe(&cfg); + mips_cps_boot_vpes(); } static void cps_init_secondary(void) @@ -281,10 +228,6 @@ static void cps_init_secondary(void) if (cpu_has_mipsmt) dmt(); - /* TODO: revisit this assumption once hotplug is implemented */ - if (cpu_vpe_id(¤t_cpu_data) == 0) - init_core(); - change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP6 | STATUSF_IP7); }