From: Piotr Dymacz Date: Wed, 21 Jun 2017 12:16:15 +0000 (+0200) Subject: ramips: add support for TP-Link TL-WR840N v4 and TL-WR841N v13 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=24043a0d2e01b9843c0dc529205b3b0bc7ecbbf9;p=openwrt%2Fstaging%2Fthess.git ramips: add support for TP-Link TL-WR840N v4 and TL-WR841N v13 TP-Link TL-WR840N v4 and TL-WR841N v13 are simple N300 routers with 5-port FE switch and non-detachable antennas. Both are very similar and are based on MediaTek MT7628NN (aka MT7628N) WiSoC. The difference between these two models is in number of available LEDs, buttons and power input switch. This work is partially based on GitHub PR#974. Specification: - MT7628N/N (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - TL-WR840N v4: 5x LED (GPIO-controlled), 1x button - TL-WR841N v13: 8x LED (GPIO-controlled*), 2x button, power input switch * WAN LED in TL-WR841N v13 is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Factory image notes: These devices use version 3 of TP-Link header, fortunately without RSA signature (at least in case of devices sold in Europe). The difference lays in the requirement for a non-zero value in "Additional Hardware Version" field. Ideally, it should match the value stored in vendor firmware header on device ("0x4"/"0x13" for these devices) but it seems that anything other than "0" is correct. We are able to prepare factory firwmare file which is accepted and (almost) correctly flashed from the vendor GUI. As it turned out, it accepts files without U-Boot image with second header at the beginning but due to some kind of bug in upgrade routine, flashed image gets corrupted before it's written to flash. Tests showed that the GUI upgrade routine copies value of "Additional Hardware Version" from existing firmware into offset "0x2023c" in provided file, _before_ storing it in flash. In case of vendor firmware upgrade files (which all include U-Boot image and two headers), this offset points to the matching field in kernel+rootfs firmware part header. Unfortunately, in case of LEDE factory image file which contains only one header, it points to the offset "0x2023c" in kernel image. This leads to a corrupted kernel and ends up with a "soft-bricked" device. The good news is that U-Boot in these devices contains well known tftp recovery mode, which can be triggered with "reset" button. What's more, in comparison to some of older MediaTek based TP-Link devices, this recovery mode doesn't write whole file at offset "0x0" in flash, without verifying provided file in advance. In case of recovery mode in these devices, first "0x20000" bytes are always skipped and "0x7a0000" bytes from rest of the file are stored in flash at offset "0x20000". Flash instruction: Until (if at all) TP-Link fixes described problem, the only way to flash LEDE image in these devices is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "lede-ramips-mt7628-tl-wr84...-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. To access U-Boot CLI, keep pressed "4" key during boot. Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 61f662b496..61fbf0f3f3 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -336,6 +336,19 @@ tiny-ac) set_wifi_led "$board:orange:wifi" set_usb_led "$board:green:usb" ;; +tl-wr840n-v4) + set_wifi_led "$board:green:wlan" + ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01" + ;; +tl-wr841n-v13) + set_wifi_led "$board:green:wlan" + ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x2" + ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x4" + ucidef_set_led_switch "lan3" "lan3" "$board:green:lan3" "switch0" "0x8" + ucidef_set_led_switch "lan4" "lan4" "$board:green:lan4" "switch0" "0x10" + ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01" + ;; vocore-8M|\ vocore-16M) ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 214db9df38..22b231bf96 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -169,6 +169,8 @@ ramips_setup_interfaces() mzk-wdpr|\ rb750gr3|\ rt-n14u|\ + tl-wr840n-v4|\ + tl-wr841n-v13|\ ubnt-erx|\ ubnt-erx-sfp|\ ur-326n4g|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 4c8f709efb..0f4e646ce1 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -35,6 +35,8 @@ get_status_led() { nbg-419n2|\ pwh2004|\ r6220|\ + tl-wr840n-v4|\ + tl-wr841n-v13|\ vr500|\ wnce2001|\ wndr3700v5|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index e146d1c476..3eb66dc646 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -487,6 +487,12 @@ ramips_board_detect() { *"Timecloud") name="timecloud" ;; + *"TL-WR840N v4") + name="tl-wr840n-v4" + ;; + *"TL-WR841N v13") + name="tl-wr841n-v13" + ;; *"UBNT-ERX") name="ubnt-erx" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 07530837d6..9b5da57146 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -230,7 +230,9 @@ platform_check_image() { ;; c20i|\ c50|\ - mr200) + mr200|\ + tl-wr840n-v4|\ + tl-wr841n-v13) [ "$magic" != "03000000" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ramips/dts/TL-WR840NV4.dts b/target/linux/ramips/dts/TL-WR840NV4.dts new file mode 100644 index 0000000000..f139483a48 --- /dev/null +++ b/target/linux/ramips/dts/TL-WR840NV4.dts @@ -0,0 +1,62 @@ +/dts-v1/; + +#include "TL-WR84XN.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-wr840n-v4", "mediatek,mt7628an-soc"; + model = "TP-Link TL-WR840N v4"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + lan { + label = "tl-wr840n-v4:green:lan"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + power { + label = "tl-wr840n-v4:green:power"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "tl-wr840n-v4:green:wan"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "tl-wr840n-v4:green:wlan"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "tl-wr840n-v4:green:wps"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "p0led_an", "p2led_an", "perst", "refclk", "wdt", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/TL-WR841NV13.dts b/target/linux/ramips/dts/TL-WR841NV13.dts new file mode 100644 index 0000000000..40f833ced3 --- /dev/null +++ b/target/linux/ramips/dts/TL-WR841NV13.dts @@ -0,0 +1,88 @@ +/dts-v1/; + +#include "TL-WR84XN.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-wr841n-v13", "mediatek,mt7628an-soc"; + model = "TP-Link TL-WR841N v13"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "tl-wr841n-v13:green:power"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "tl-wr841n-v13:green:wps"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "tl-wr841n-v13:green:lan1"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "tl-wr841n-v13:green:lan2"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "tl-wr841n-v13:green:lan3"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + lan4 { + label = "tl-wr841n-v13:green:lan4"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + wan_green { + label = "tl-wr841n-v13:green:wan"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + wan_orange { + label = "tl-wr841n-v13:orange:wan"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "tl-wr841n-v13:green:wlan"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "perst", "refclk", "uart1", "wdt", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/TL-WR84XN.dtsi b/target/linux/ramips/dts/TL-WR84XN.dtsi new file mode 100644 index 0000000000..c9d0cddb37 --- /dev/null +++ b/target/linux/ramips/dts/TL-WR84XN.dtsi @@ -0,0 +1,67 @@ +#include "mt7628an.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + factory: partition@7d0000 { + label = "factory"; + reg = <0x7d0000 0x30000>; + read-only; + }; + }; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; + +&wmac { + status = "okay"; + mtd-mac-address = <&factory 0xf100>; + mediatek,mtd-eeprom = <&factory 0x20000>; +}; + +ðernet { + mtd-mac-address = <&factory 0xf100>; + mediatek,portmap = "llllw"; +}; diff --git a/target/linux/ramips/image/mt7628.mk b/target/linux/ramips/image/mt7628.mk index f8bd2c18b2..fbfc37d986 100644 --- a/target/linux/ramips/image/mt7628.mk +++ b/target/linux/ramips/image/mt7628.mk @@ -2,6 +2,8 @@ # MT7628 Profiles # +DEVICE_VARS += TPLINK_BOARD_ID + define Device/mt7628 DTS := MT7628 BLOCKSIZE := 64k @@ -26,6 +28,28 @@ define Device/miwifi-nano endef TARGET_DEVICES += miwifi-nano +define Device/tl-wr840n-v4 + DTS := TL-WR840NV4 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-Link TL-WR840N v4 + TPLINK_BOARD_ID := TL-WR840NV4 + KERNEL := $(KERNEL_DTB) + IMAGES += tftp-recovery.bin + IMAGE/factory.bin := tplink-v2-image + IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin) + IMAGE/sysupgrade.bin := tplink-v2-image -s | append-metadata | \ + check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += tl-wr840n-v4 + +define Device/tl-wr841n-v13 + $(Device/tl-wr840n-v4) + DTS := TL-WR841NV13 + DEVICE_TITLE := TP-Link TL-WR841N v13 + TPLINK_BOARD_ID := TL-WR841NV13 +endef +TARGET_DEVICES += tl-wr841n-v13 + define Device/gl-mt300n-v2 DTS := GL-MT300N-V2 IMAGE_SIZE := 16064k diff --git a/target/linux/ramips/mt7628/config-4.4 b/target/linux/ramips/mt7628/config-4.4 index 1dd8c75824..4b1bddb3c8 100644 --- a/target/linux/ramips/mt7628/config-4.4 +++ b/target/linux/ramips/mt7628/config-4.4 @@ -138,6 +138,7 @@ CONFIG_MTD_NAND_MT7620=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_TPLINK_FW=y CONFIG_MTD_SPLIT_TRX_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_NEED_DMA_MAP_STATE=y @@ -191,6 +192,7 @@ CONFIG_SPI_MT7621=y # CONFIG_SPI_RT2880 is not set CONFIG_SRCU=y CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_SYS_HAS_CPU_MIPS32_R2=y diff --git a/target/linux/ramips/mt7628/config-4.9 b/target/linux/ramips/mt7628/config-4.9 index 0c6026c9f7..23ee65cd1e 100644 --- a/target/linux/ramips/mt7628/config-4.9 +++ b/target/linux/ramips/mt7628/config-4.9 @@ -140,6 +140,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_TPLINK_FW=y CONFIG_MTD_SPLIT_TRX_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_NEED_DMA_MAP_STATE=y @@ -193,6 +194,7 @@ CONFIG_SPI_MT7621=y # CONFIG_SPI_RT2880 is not set CONFIG_SRCU=y CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y CONFIG_SWPHY=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y diff --git a/tools/firmware-utils/src/mktplinkfw2.c b/tools/firmware-utils/src/mktplinkfw2.c index b6dd670b90..14c5a492b7 100644 --- a/tools/firmware-utils/src/mktplinkfw2.c +++ b/tools/firmware-utils/src/mktplinkfw2.c @@ -207,6 +207,22 @@ static struct board_info boards[] = { .layout_id = "8MLmtk", .hdr_ver = 3, .endian_swap = true, + }, { + .id = "TL-WR840NV4", + .hw_id = 0x08400004, + .hw_rev = 0x1, + .hw_ver_add = 0x4, + .layout_id = "8Mmtk", + .hdr_ver = 3, + .endian_swap = true, + }, { + .id = "TL-WR841NV13", + .hw_id = 0x08410013, + .hw_rev = 0x268, + .hw_ver_add = 0x13, + .layout_id = "8Mmtk", + .hdr_ver = 3, + .endian_swap = true, }, { /* terminating entry */ }