From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 2 Sep 2016 20:44:16 +0000 (+0300)
Subject: MIPS: Octeon: Delete legacy hack for broken bootloaders
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=23d1f8f589df4a537751f4d6accc5841ed6cb24e;p=openwrt%2Fstaging%2Fblogic.git

MIPS: Octeon: Delete legacy hack for broken bootloaders

Delete legacy hack for broken bootloaders. The warning has been in kernel
for several years, and if there are still users using such bootloaders,
they can fix the boot by supplying a proper DTB.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14201/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index ff49fc04500c..3751c580ff85 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -675,48 +675,6 @@ int __cvmx_helper_board_hardware_enable(int interface)
 			cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface),
 				       0xc);
 		}
-	} else if (cvmx_sysinfo_get()->board_type ==
-		   CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
-		/*
-		 * Broadcom PHYs require differnet ASX
-		 * clocks. Unfortunately many boards don't define a
-		 * new board Id and simply mangle the
-		 * CN3010_EVB_HS5
-		 */
-		if (interface == 0) {
-			/*
-			 * Some boards use a hacked up bootloader that
-			 * identifies them as CN3010_EVB_HS5
-			 * evaluation boards.  This leads to all kinds
-			 * of configuration problems.  Detect one
-			 * case, and print warning, while trying to do
-			 * the right thing.
-			 */
-			int phy_addr = cvmx_helper_board_get_mii_address(0);
-			if (phy_addr != -1) {
-				int phy_identifier =
-				    cvmx_mdio_read(phy_addr >> 8,
-						   phy_addr & 0xff, 0x2);
-				/* Is it a Broadcom PHY? */
-				if (phy_identifier == 0x0143) {
-					cvmx_dprintf("\n");
-					cvmx_dprintf("ERROR:\n");
-					cvmx_dprintf
-					    ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
-					cvmx_dprintf
-					    ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n");
-					cvmx_dprintf
-					    ("ERROR: All boards require a unique board type to identify them.\n");
-					cvmx_dprintf("ERROR:\n");
-					cvmx_dprintf("\n");
-					cvmx_wait(1000000000);
-					cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX
-						       (0, interface), 5);
-					cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX
-						       (0, interface), 5);
-				}
-			}
-		}
 	} else if (cvmx_sysinfo_get()->board_type ==
 			CVMX_BOARD_TYPE_UBNT_E100) {
 		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);