From: John Crispin Date: Thu, 21 Apr 2016 19:47:08 +0000 (+0000) Subject: ramips: Add support for ZBT WG3526 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=23bef4bc61724a419ca165c66ccc6966c05f5e59;p=openwrt%2Fsvn-archive%2Farchive.git ramips: Add support for ZBT WG3526 The WG3526 is the follow-up to the 2626 and is mostly the same, with the excaption that the mt7602 has been replaced with the mt7603. The internal wifi setup has also changed slightly. Based on my tests, everything that worked on the 2626 works on the 3526 and with roughly the same performance. v1->v2: * Remove some references to 2626 that I had missed in the dts. v2->v3: * Update patch to match new file structure. * Removed SD driver to be consistent with other MT7621 targets. Signed-off-by: Kristian Evensen SVN-Revision: 49213 --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2863b8843f..3c958ae06b 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -86,6 +86,7 @@ ramips_setup_interfaces() wt1520|\ y1|\ zbt-wg2626|\ + zbt-wg3526|\ youku-yk1) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 44353b6cc8..bd0ff05c72 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -66,7 +66,8 @@ get_status_led() { v11st-fe|\ vocore|\ wmr-300|\ - zbt-wg2626) + zbt-wg2626|\ + zbt-wg3526) status_led="$board:green:status" ;; atp-52b|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 459de6f84d..550ec55cd2 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -508,6 +508,9 @@ ramips_board_detect() { *"ZBT-WG2626") name="zbt-wg2626" ;; + *"ZBT-WG3526") + name="zbt-wg3526" + ;; *"ZBT-WR8305RT") name="zbt-wr8305rt" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index e880f60f73..73ba6e61b5 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -151,6 +151,7 @@ platform_check_image() { zbt-wa05|\ zbt-we826|\ zbt-wg2626|\ + zbt-wg3526|\ zbt-wr8305rt|\ zte-q7|\ youku-yk1) diff --git a/target/linux/ramips/dts/ZBT-WG3526.dts b/target/linux/ramips/dts/ZBT-WG3526.dts new file mode 100644 index 0000000000..30b508c533 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WG3526.dts @@ -0,0 +1,127 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "ZBT-WG3526"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + sdhci@10130000 { + status = "okay"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + }; + }; + + i2c@900 { + compatible = "ralink,i2c-mt7621"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "zbt-wg3526:green:status"; + gpios = <&gpio0 24 1>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 0732a447bb..0af9596e5e 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -103,6 +103,12 @@ define Device/zbt-wg2626 endef TARGET_DEVICES += zbt-wg2626 +define Device/zbt-wg3526 + DTS := ZBT-WG3526 + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef +TARGET_DEVICES += zbt-wg3526 + define Device/wf-2881 DTS := WF-2881 BLOCKSIZE := 128KiB diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk index 0073645181..453687d4c5 100644 --- a/target/linux/ramips/mt7621/profiles/zbt.mk +++ b/target/linux/ramips/mt7621/profiles/zbt.mk @@ -16,3 +16,16 @@ define Profile/ZBT-WG2626/Description Package set for ZBT-WG2626 device endef $(eval $(call Profile,ZBT-WG2626)) + + +define Profile/ZBT-WG3526 + NAME:=ZBT-WG3526 Device + PACKAGES:=\ + kmod-usb-core kmod-usb3 \ + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci +endef + +define Profile/ZBT-WG3526/Description + Package set for ZBT-WG3526 device +endef +$(eval $(call Profile,ZBT-WG3526))