From: John Crispin <john@openwrt.org>
Date: Sat, 30 Nov 2013 08:36:56 +0000 (+0000)
Subject: ramips: Fix initial network configuration for few boards
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2370126b9b5e139e7be753ffb5a44eda7b68e20d;p=openwrt%2Fstaging%2Fluka.git

ramips: Fix initial network configuration for few boards

Argus ATP52B:      ethernet didn't work because of unconfigured switch
Sparklan WCR150GN: add switch config and make single port to be LAN
Dlink DIR-645:     seems to be a redundant case

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38960
---

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 79ad4b885f..63458eda0a 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -56,7 +56,6 @@ ramips_setup_interfaces()
 		;;
 
 	3g-6200n | \
-	argus-atp52b | \
 	b2c | \
 	nw718 | \
 	psr-680w | \
@@ -72,13 +71,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
 		;;
 
-	dir-645)
-		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
-		ucidef_add_switch_vlan "switch0" "2" "0 6t"
-		;;
-
 	dir-610-a1 | \
 	dir-300-b7 | \
 	dir-320-b1 | \
@@ -90,6 +82,8 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "2" "4 6t"
 		;;
 
+	argus-atp52b | \
+	dir-645 | \
 	f5d8235-v1 | \
 	f5d8235-v2 | \
 	hg255d | \
@@ -136,7 +130,10 @@ ramips_setup_interfaces()
 		;;
 
 	wcr-150gn)
-		ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "0 6t"
+		ucidef_add_switch_vlan "switch0" "2" "6t"
 		;;
 
 	d105 | \