From: Perry Melange Date: Sun, 26 Apr 2020 08:51:33 +0000 (+0200) Subject: ramips: erx and erx-sfp: fix missing WAN interface X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=22468cc40c8b6ff5ff020b3c6468e07cbd5bb722;p=openwrt%2Fstaging%2Fjogo.git ramips: erx and erx-sfp: fix missing WAN interface This partially reverts commit 5acd1ed0be0d ("ramips: mt7621: fix Ubiquiti ER-X ports names and MAC addresses"), this change was discussed in https://github.com/openwrt/openwrt/pull/2901#discussion_r407238452 With commit 5acd1ed0be0d ("ramips: mt7621: fix Ubiquiti ER-X ports names and MAC addresses"), all the ports were put into the LAN bridge, with the argument that the OEM firmware does not have a WAN port enabled. In the default OEM setup, all of the ports except eth0 are dead and eth0 is set to a static IP address without providing DHCP services when connected. It is only after the wizard has been run that eth0 becomes the WAN port and all the rest of the ports belong to LAN with DHCP enabled. Having all of the ports set to the LAN bridge does not mirror the default OEM setup. To accomplish that, then only eth0 would be in the LAN bridge. But this is not the expected behaviour of OpenWrt. Therefore this proposal to set eth0 to WAN and eth1-N to LAN provides the expected behaviour expected from OpenWrt, maintains the current documentation as up-to-date, and does not require the user to manually detach eth0 from the LAN bridge, create the WAN(6) interface(s), and set eth0 to the WAN(6) interface(s). Fixes: 5acd1ed0be0d ("ramips: mt7621: fix Ubiquiti ER-X ports names and MAC addresses") Signed-off-by: Perry Melange [commit subject and description tweaks] Signed-off-by: Petr Štetiar --- diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index ba9f7fb7b6..290069f4d3 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -44,10 +44,10 @@ ramips_setup_interfaces() ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan" ;; ubnt,edgerouter-x) - ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4" + ucidef_set_interface_lan_wan "eth1 eth2 eth3 eth4" "eth0" ;; ubnt,edgerouter-x-sfp) - ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4 eth5" + ucidef_set_interface_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0" ;; *) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"