From: Gabor Juhos Date: Wed, 24 Nov 2010 10:01:23 +0000 (+0000) Subject: ramips: add support for Belkin F5D8235 v2 board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=21c8d63505881609c5b7f04d8e8d97ce210b7985;p=openwrt%2Fstaging%2Fmans0n.git ramips: add support for Belkin F5D8235 v2 board No support for usb for now. Signed-off-by: Roman Yeryomin SVN-Revision: 24126 --- diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 286323fe12..d0aaa6b9c4 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -21,6 +21,7 @@ enum ramips_mach_type { RAMIPS_MACH_DIR_300_REVB, /* D-Link DIR-300 rev B */ /* RT3052 based machines */ + RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index f50328b109..d4087aef48 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -2,6 +2,12 @@ if RALINK_RT305X menu "Ralink RT350x machine selection" +config RT305X_MACH_F5D8235_V2 + bool "Belkin F5D8235 v2 support" + default y + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_WHR_G300N bool "Buffalo WHR-G300N support" default y diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 75f65700bc..a18a03500f 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c new file mode 100644 index 0000000000..6a400424c6 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c @@ -0,0 +1,141 @@ +/* + * Belkin F5D8235 v2 board support + * + * Copyright (C) 2010 Roman Yeryomin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#include "devices.h" + +#define F5D8235_V2_GPIO_LED_INTERNET_BLUE 5 +#define F5D8235_V2_GPIO_LED_INTERNET_AMBER 6 +#define F5D8235_V2_GPIO_LED_MODEM_BLUE 11 +#define F5D8235_V2_GPIO_LED_MODEM_AMBER 8 +#define F5D8235_V2_GPIO_LED_ROUTER 9 +#define F5D8235_V2_GPIO_LED_STORAGE_BLUE 23 +#define F5D8235_V2_GPIO_LED_STORAGE_AMBER 22 +#define F5D8235_V2_GPIO_LED_SECURITY_BLUE 13 +#define F5D8235_V2_GPIO_LED_SECURITY_AMBER 12 + +static struct gpio_led f5d8235v2_leds_gpio[] __initdata = { + { + .name = "f5d8235v2:blue:internet", + .gpio = F5D8235_V2_GPIO_LED_INTERNET_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:internet", + .gpio = F5D8235_V2_GPIO_LED_INTERNET_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:modem", + .gpio = F5D8235_V2_GPIO_LED_MODEM_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:modem", + .gpio = F5D8235_V2_GPIO_LED_MODEM_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:router", + .gpio = F5D8235_V2_GPIO_LED_ROUTER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:storage", + .gpio = F5D8235_V2_GPIO_LED_STORAGE_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:storage", + .gpio = F5D8235_V2_GPIO_LED_STORAGE_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:security", + .gpio = F5D8235_V2_GPIO_LED_SECURITY_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:security", + .gpio = F5D8235_V2_GPIO_LED_SECURITY_AMBER, + .active_low = 1, + } +}; + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition f5d8235v2_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x050000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel and rootfs", + .offset = 0x050000, + .size = 0x790000, + }, { + .name = "rootfs", + .offset = 0x1D0000, + .size = 0x610000, + }, { + .name = "nvram", + .offset = 0x7E0000, + .size = 0x010000, + }, { + .name = "factory", + .offset = 0x7F0000, + .size = 0x010000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data f5d8235v2_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(f5d8235v2_partitions), + .parts = f5d8235v2_partitions, +#endif +}; + + +static struct rtl8366rb_platform_data f5d8235v2_switch_data = { + .gpio_sda = RT305X_GPIO_I2C_SD, + .gpio_sck = RT305X_GPIO_I2C_SCLK, +}; + +static struct platform_device f5d8235v2_switch = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &f5d8235v2_switch_data, + } +}; + +static void __init f5d8235v2_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_MDIO); + rt305x_register_flash(0, &f5d8235v2_flash_data); + ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235v2_leds_gpio), + f5d8235v2_leds_gpio); + rt305x_register_ethernet(); + platform_device_register(&f5d8235v2_switch); + rt305x_register_wifi(); +} + +MIPS_MACHINE(RAMIPS_MACH_F5D8235_V2, "F5D8235_V2", "Belkin F5D8235 v2", + f5d8235v2_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index acd328317c..79809de9fd 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -113,6 +113,18 @@ define Image/Build/Profile/WCR150GN endef +mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware) +mtd_f5d8235_kernel_part_size=1572864 +mtd_f5d8235_rootfs_part_size=6356992 +define Image/Build/Template/F5D8235V2 + $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size)) +endef + +define Image/Build/Profile/F5D8235V2 + $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2) +endef + + ifeq ($(CONFIG_RALINK_RT305X),y) define Image/Build/Profile/Default $(call Image/Build/Profile/DIR300B1,$(1)) @@ -121,6 +133,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/PWH2004,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) $(call Image/Build/Profile/WCR150GN,$(1)) + $(call Image/Build/Profile/F5D8235V2,$(1)) endef endif diff --git a/target/linux/ramips/rt305x/config-2.6.32 b/target/linux/ramips/rt305x/config-2.6.32 index 1d29c914f7..05388b296d 100644 --- a/target/linux/ramips/rt305x/config-2.6.32 +++ b/target/linux/ramips/rt305x/config-2.6.32 @@ -117,6 +117,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y # CONFIG_RALINK_RT288X is not set CONFIG_RALINK_RT305X=y CONFIG_RT305X_MACH_DIR_300_REVB=y +CONFIG_RT305X_MACH_F5D8235_V2=y CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_V22RW_2X2=y CONFIG_RT305X_MACH_PWH2004=y diff --git a/target/linux/ramips/rt305x/config-2.6.34 b/target/linux/ramips/rt305x/config-2.6.34 index 91b7e56426..b677856b6b 100644 --- a/target/linux/ramips/rt305x/config-2.6.34 +++ b/target/linux/ramips/rt305x/config-2.6.34 @@ -127,6 +127,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y # CONFIG_RALINK_RT288X is not set CONFIG_RALINK_RT305X=y CONFIG_RT305X_MACH_DIR_300_REVB=y +CONFIG_RT305X_MACH_F5D8235_V2=y CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_V22RW_2X2=y CONFIG_RT305X_MACH_PWH2004=y