From: Álvaro Fernández Rojas Date: Tue, 25 Jun 2024 15:41:19 +0000 (+0200) Subject: bmips: refactor Inteno XG6846 device tree X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=21a5b3b540bb6ac853d5774d554a26a2cd8f23eb;p=openwrt%2Fstaging%2Fthess.git bmips: refactor Inteno XG6846 device tree Refactor Inteno XG6846 device tree to be in line with other bmips devices. Also expose USB LED automatically. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds index b2ccc9a60e..3b9033a4d4 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds @@ -10,6 +10,7 @@ arcadyan,ar7516) ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan" ucidef_set_led_netdev "wlan0" "WiFi" "green:wifi" "phy0-ap0" ;; +inteno,xg6846 |\ nucom,r5010unv2 |\ sercomm,ad1018) ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1" diff --git a/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts b/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts index 72f85a53ca..8f5b30d213 100644 --- a/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts +++ b/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts @@ -1,5 +1,4 @@ // SPDX-License-Identifier: GPL-2.0 -/dts-v1/; /* * Devicetree for the Inteno XG6846 router, mostly used as a @@ -16,26 +15,18 @@ * Some devices have a USB type A host receptacle mounted, * some do not. */ + #include "bcm6328.dtsi" -#include -#include / { model = "Inteno XG6846"; compatible = "inteno,xg6846", "brcm,bcm6328"; - /* OpenWrt-specific aliases */ aliases { - led-boot = &led_pwr_red; - led-failsafe = &led_pwr_red; - led-running = &led_pwr_green; - led-upgrade = &led_pwr_red; - led-usb = &led_usb_green; - }; - - chosen { - bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; + led-boot = &led_power_red; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; }; /* @@ -60,17 +51,9 @@ #size-cells = <0>; }; - sfp0: sfp0 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - }; - keys { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; + poll-interval = <100>; reset { label = "reset"; @@ -79,6 +62,12 @@ debounce-interval = <60>; }; }; + + sfp0: sfp0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; }; &hsspi { @@ -110,10 +99,20 @@ #address-cells = <1>; #size-cells = <1>; - cfe: partition@0 { + partition@0 { label = "cfe"; reg = <0x0000000 0x0010000>; read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_cfe_6a0: macaddr@6a0 { + reg = <0x6a0 0x6>; + }; + }; }; partition@10000 { @@ -131,16 +130,6 @@ }; }; -&cfe { - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_cfe_6a0: macaddr@6a0 { - reg = <0x6a0 0x6>; - }; -}; - ðernet { status = "okay"; @@ -148,20 +137,33 @@ nvmem-cell-names = "mac-address"; }; -&switch0 { - dsa,member = <0 0>; +&leds { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>, + <&pinctrl_ephy1_spd_led>, + <&pinctrl_ephy3_spd_led>; - ports { - switch0port4: port@4 { - reg = <4>; - label = "extsw"; + led@16 { + reg = <16>; + active-low; + function = LED_FUNCTION_USB; + color = ; + }; - phy-mode = "rgmii"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; + led_power_red: led@18 { + reg = <18>; + active-low; + function = LED_FUNCTION_POWER; + color = ; + panic-indicator; + }; + + led_power_green: led@20 { + reg = <20>; + active-low; + function = LED_FUNCTION_POWER; + color = ; }; }; @@ -172,8 +174,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + interrupt-controller; #interrupt-cells = <2>; + dsa,member = <1 0>; ports { @@ -183,38 +187,45 @@ port@0 { reg = <0>; label = "lan1"; + phy-handle = <&lan1phy>; }; port@1 { reg = <1>; label = "lan2"; + phy-handle = <&lan2phy>; }; port@2 { reg = <2>; label = "lan3"; + phy-handle = <&lan3phy>; }; port@3 { reg = <3>; label = "lan4"; + phy-handle = <&lan4phy>; }; port@4 { reg = <4>; label = "ext1"; + phy-handle = <&ext1phy>; }; port@5 { reg = <5>; - phy-mode = "rgmii-id"; label = "wan"; + + phy-mode = "rgmii-id"; sfp = <&sfp0>; + fixed-link { speed = <1000>; full-duplex; @@ -223,9 +234,10 @@ port@6 { reg = <6>; + phy-mode = "rgmii-id"; - label = "cpu"; ethernet = <&switch0port4>; + fixed-link { speed = <1000>; full-duplex; @@ -242,21 +254,25 @@ interrupt-parent = <&switch1>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; + lan2phy: ethernet-phy@1 { reg = <1>; interrupt-parent = <&switch1>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + lan3phy: ethernet-phy@2 { reg = <2>; interrupt-parent = <&switch1>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; + lan4phy: ethernet-phy@3 { reg = <3>; interrupt-parent = <&switch1>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; }; + ext1phy: ethernet-phy@4 { reg = <4>; interrupt-parent = <&switch1>; @@ -271,43 +287,26 @@ }; &pinctrl { - pinctrl_xg6846_usb_spd_led: xg6846_usb_spd_led-pins { + pinctrl_leds: leds { function = "led"; - pins = "gpio17"; + pins = "gpio16", "gpio18", "gpio20"; }; }; -&leds { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_xg6846_usb_spd_led>, /* GPIO16 LED USB */ - <&pinctrl_ephy1_spd_led>, /* GPIO18 LED PWR red */ - <&pinctrl_ephy3_spd_led>; /* GPIO20 LED PWR green */ +&switch0 { + dsa,member = <0 0>; - /* On board variants without USB this LED is not mounted */ - led_usb_green: led@16 { - reg = <16>; - active-low; - label = "green:usb"; - default-state = "off"; - }; + ports { + switch0port4: port@4 { + reg = <4>; + label = "extsw"; - /* - * LED 18 and 20 drive the same physical LED, the PWR - * LED that can be both red and green. - */ - led_pwr_red: led@18 { - reg = <18>; - active-low; - label = "red:pwr"; - default-state = "off"; - }; + phy-mode = "rgmii"; - led_pwr_green: led@20 { - reg = <20>; - active-low; - label = "green:pwr"; - default-state = "off"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; - };