From: Jan Engelhardt Date: Wed, 8 Oct 2008 09:35:17 +0000 (+0200) Subject: netfilter: ebtables: make BRIDGE_NF_EBTABLES a menuconfig option X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=20f3c56f4d7c76bcb66050f3364aa8da110f5bbd;p=openwrt%2Fstaging%2Fblogic.git netfilter: ebtables: make BRIDGE_NF_EBTABLES a menuconfig option Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy --- diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig index e7c197ffb2f4..366d3e9d51f8 100644 --- a/net/bridge/netfilter/Kconfig +++ b/net/bridge/netfilter/Kconfig @@ -2,22 +2,21 @@ # Bridge netfilter configuration # -menu "Bridge: Netfilter Configuration" - depends on BRIDGE && BRIDGE_NETFILTER - -config BRIDGE_NF_EBTABLES +menuconfig BRIDGE_NF_EBTABLES tristate "Ethernet Bridge tables (ebtables) support" select NETFILTER_XTABLES help ebtables is a general, extensible frame/packet identification framework. Say 'Y' or 'M' here if you want to do Ethernet filtering/NAT/brouting on the Ethernet bridge. + +if BRIDGE_NF_EBTABLES + # # tables # config BRIDGE_EBT_BROUTE tristate "ebt: broute table support" - depends on BRIDGE_NF_EBTABLES help The ebtables broute table is used to define rules that decide between bridging and routing frames, giving Linux the functionality of a @@ -28,7 +27,6 @@ config BRIDGE_EBT_BROUTE config BRIDGE_EBT_T_FILTER tristate "ebt: filter table support" - depends on BRIDGE_NF_EBTABLES help The ebtables filter table is used to define frame filtering rules at local input, forwarding and local output. See the man page for @@ -38,7 +36,6 @@ config BRIDGE_EBT_T_FILTER config BRIDGE_EBT_T_NAT tristate "ebt: nat table support" - depends on BRIDGE_NF_EBTABLES help The ebtables nat table is used to define rules that alter the MAC source address (MAC SNAT) or the MAC destination address (MAC DNAT). @@ -50,7 +47,6 @@ config BRIDGE_EBT_T_NAT # config BRIDGE_EBT_802_3 tristate "ebt: 802.3 filter support" - depends on BRIDGE_NF_EBTABLES help This option adds matching support for 802.3 Ethernet frames. @@ -58,7 +54,6 @@ config BRIDGE_EBT_802_3 config BRIDGE_EBT_AMONG tristate "ebt: among filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the among match, which allows matching the MAC source and/or destination address on a list of addresses. Optionally, @@ -68,7 +63,6 @@ config BRIDGE_EBT_AMONG config BRIDGE_EBT_ARP tristate "ebt: ARP filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the ARP match, which allows ARP and RARP header field filtering. @@ -77,7 +71,6 @@ config BRIDGE_EBT_ARP config BRIDGE_EBT_IP tristate "ebt: IP filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the IP match, which allows basic IP header field filtering. @@ -95,7 +88,6 @@ config BRIDGE_EBT_IP6 config BRIDGE_EBT_LIMIT tristate "ebt: limit match support" - depends on BRIDGE_NF_EBTABLES help This option adds the limit match, which allows you to control the rate at which a rule can be matched. This match is the @@ -106,7 +98,6 @@ config BRIDGE_EBT_LIMIT config BRIDGE_EBT_MARK tristate "ebt: mark filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the mark match, which allows matching frames based on the 'nfmark' value in the frame. This can be set by the mark target. @@ -117,7 +108,6 @@ config BRIDGE_EBT_MARK config BRIDGE_EBT_PKTTYPE tristate "ebt: packet type filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the packet type match, which allows matching on the type of packet based on its Ethernet "class" (as determined by @@ -128,7 +118,6 @@ config BRIDGE_EBT_PKTTYPE config BRIDGE_EBT_STP tristate "ebt: STP filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the Spanning Tree Protocol match, which allows STP header field filtering. @@ -137,7 +126,6 @@ config BRIDGE_EBT_STP config BRIDGE_EBT_VLAN tristate "ebt: 802.1Q VLAN filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the 802.1Q vlan match, which allows the filtering of 802.1Q vlan fields. @@ -157,7 +145,6 @@ config BRIDGE_EBT_ARPREPLY config BRIDGE_EBT_DNAT tristate "ebt: dnat target support" - depends on BRIDGE_NF_EBTABLES help This option adds the MAC DNAT target, which allows altering the MAC destination address of frames. @@ -166,7 +153,6 @@ config BRIDGE_EBT_DNAT config BRIDGE_EBT_MARK_T tristate "ebt: mark target support" - depends on BRIDGE_NF_EBTABLES help This option adds the mark target, which allows marking frames by setting the 'nfmark' value in the frame. @@ -177,7 +163,6 @@ config BRIDGE_EBT_MARK_T config BRIDGE_EBT_REDIRECT tristate "ebt: redirect target support" - depends on BRIDGE_NF_EBTABLES help This option adds the MAC redirect target, which allows altering the MAC destination address of a frame to that of the device it arrived on. @@ -186,7 +171,6 @@ config BRIDGE_EBT_REDIRECT config BRIDGE_EBT_SNAT tristate "ebt: snat target support" - depends on BRIDGE_NF_EBTABLES help This option adds the MAC SNAT target, which allows altering the MAC source address of frames. @@ -197,7 +181,6 @@ config BRIDGE_EBT_SNAT # config BRIDGE_EBT_LOG tristate "ebt: log support" - depends on BRIDGE_NF_EBTABLES help This option adds the log watcher, that you can use in any rule in any ebtables table. It records info about the frame header @@ -207,7 +190,6 @@ config BRIDGE_EBT_LOG config BRIDGE_EBT_ULOG tristate "ebt: ulog support (OBSOLETE)" - depends on BRIDGE_NF_EBTABLES help This option enables the old bridge-specific "ebt_ulog" implementation which has been obsoleted by the new "nfnetlink_log" code (see @@ -224,7 +206,6 @@ config BRIDGE_EBT_ULOG config BRIDGE_EBT_NFLOG tristate "ebt: nflog support" - depends on BRIDGE_NF_EBTABLES help This option enables the nflog watcher, which allows to LOG messages through the netfilter logging API, which can use @@ -236,4 +217,4 @@ config BRIDGE_EBT_NFLOG To compile it as a module, choose M here. If unsure, say N. -endmenu +endif # BRIDGE_NF_EBTABLES