From: Jan Alexander <jan@nalx.net>
Date: Wed, 29 Jan 2020 14:03:18 +0000 (+0100)
Subject: ramips: use tpt DTS trigger for TP-Link TL-MR3020 v3 and TL-WA801ND v5
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=20eb45da4fc19c12ea2073471992eeaf9d602fa5;p=openwrt%2Fstaging%2Fxback.git

ramips: use tpt DTS trigger for TP-Link TL-MR3020 v3 and TL-WA801ND v5

This converts the TP-Link TL-MR3020v3 board to use the WLAN throughput
LED trigger in order to react to all VAPs.

It also moves the WLAN trigger config of the TP-Link TL-WA801NDv5 to the
DTS and merges the now identical LAN LED configs.

Verified these changes on a TL-MR3020v3.

Signed-off-by: Jan Alexander <jan@nalx.net>
[changed commit title and extended commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---

diff --git a/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts b/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts
index fa69110d45..cf0f5eb796 100644
--- a/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts
+++ b/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts
@@ -61,6 +61,7 @@
 		wlan {
 			label = "tl-mr3020-v3:green:wlan";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
 		};
 
 		wps {
diff --git a/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts b/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts
index d2cb271efb..7b9033202c 100644
--- a/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts
+++ b/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts
@@ -48,6 +48,7 @@
 		wlan {
 			label = "tl-wa801nd-v5:green:wlan";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
 		};
 
 		wps_red {
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
index 79f45ba545..877dbb60bd 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -64,9 +64,9 @@ tplink,archer-c50-v4)
 	ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
 	ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
 	;;
-tplink,tl-mr3020-v3)
-	set_wifi_led "$boardname:green:wlan"
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+tplink,tl-mr3020-v3|\
+tplink,tl-wa801nd-v5)
+	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
 	;;
 tplink,tl-mr3420-v5|\
 tplink,tl-wr842n-v5)
@@ -74,10 +74,6 @@ tplink,tl-wr842n-v5)
 	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
 	;;
-tplink,tl-wa801nd-v5)
-	ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
-	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
-	;;
 tplink,tl-wr840n-v4)
 	ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
 	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"