From: Daniel Golle Date: Tue, 31 Jul 2018 02:50:38 +0000 (+0200) Subject: kernel: re-add patch for AT8032 Ethernet PHY X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=20c64dabb67b210c1148820e626fbe0b1dc994f6;p=openwrt%2Fstaging%2Fxback.git kernel: re-add patch for AT8032 Ethernet PHY The patch was wrongly removed by a kernel version bump to 4.9.106 in the believe that it was merged upstream thow it wasn't. This lead to unrecoverable link losses on devices which use those PHYs such as many ubnt single-port CPEs. Fixes: 6f8eb1b50f ("kernel: bump 4.9 to 4.9.106 for 18.06") Signed-off-by: Daniel Golle (cherry picked from commit a497e47762) --- diff --git a/target/linux/ar71xx/patches-4.9/902-at803x-add-reset-gpio-pdata.patch b/target/linux/ar71xx/patches-4.9/902-at803x-add-reset-gpio-pdata.patch index fb6f85cdfd..cb3ed89e98 100644 --- a/target/linux/ar71xx/patches-4.9/902-at803x-add-reset-gpio-pdata.patch +++ b/target/linux/ar71xx/patches-4.9/902-at803x-add-reset-gpio-pdata.patch @@ -16,7 +16,7 @@ Signed-off-by: Felix Fietkau #endif /* _PHY_AT803X_PDATA_H */ --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c -@@ -263,6 +263,7 @@ static int at803x_resume(struct phy_devi +@@ -264,6 +264,7 @@ static int at803x_resume(struct phy_devi static int at803x_probe(struct phy_device *phydev) { @@ -24,8 +24,8 @@ Signed-off-by: Felix Fietkau struct device *dev = &phydev->mdio.dev; struct at803x_priv *priv; struct gpio_desc *gpiod_reset; -@@ -274,6 +275,12 @@ static int at803x_probe(struct phy_devic - if (phydev->drv->phy_id != ATH8030_PHY_ID) +@@ -276,6 +277,12 @@ static int at803x_probe(struct phy_devic + phydev->drv->phy_id != ATH8032_PHY_ID) goto does_not_require_reset_workaround; + pdata = dev_get_platdata(dev); @@ -37,7 +37,7 @@ Signed-off-by: Felix Fietkau gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(gpiod_reset)) return PTR_ERR(gpiod_reset); -@@ -405,15 +412,23 @@ static void at803x_link_change_notify(st +@@ -407,15 +414,23 @@ static void at803x_link_change_notify(st * cannot recover from by software. */ if (phydev->state == PHY_NOLINK) { diff --git a/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch new file mode 100644 index 0000000000..f2d5df503f --- /dev/null +++ b/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch @@ -0,0 +1,70 @@ +From: Felix Fietkau +Subject: net: phy: at803x: add support for AT8032 + +Like AT8030, this PHY needs the GPIO reset workaround + +Signed-off-by: Felix Fietkau +--- + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -62,6 +62,7 @@ + + #define ATH8030_PHY_ID 0x004dd076 + #define ATH8031_PHY_ID 0x004dd074 ++#define ATH8032_PHY_ID 0x004dd023 + #define ATH8035_PHY_ID 0x004dd072 + + MODULE_DESCRIPTION("Atheros 803x PHY driver"); +@@ -259,7 +260,8 @@ static int at803x_probe(struct phy_devic + if (!priv) + return -ENOMEM; + +- if (phydev->drv->phy_id != ATH8030_PHY_ID) ++ if (phydev->drv->phy_id != ATH8030_PHY_ID && ++ phydev->drv->phy_id != ATH8032_PHY_ID) + goto does_not_require_reset_workaround; + + gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); +@@ -335,7 +337,7 @@ static void at803x_link_change_notify(st + struct at803x_priv *priv = phydev->priv; + + /* +- * Conduct a hardware reset for AT8030 every time a link loss is ++ * Conduct a hardware reset for AT8030/2 every time a link loss is + * signalled. This is necessary to circumvent a hardware bug that + * occurs when the cable is unplugged while TX packets are pending + * in the FIFO. In such cases, the FIFO enters an error mode it +@@ -447,6 +449,24 @@ static struct phy_driver at803x_driver[] + .aneg_done = at803x_aneg_done, + .ack_interrupt = &at803x_ack_interrupt, + .config_intr = &at803x_config_intr, ++}, { ++ /* ATHEROS 8032 */ ++ .phy_id = ATH8032_PHY_ID, ++ .name = "Atheros 8032 ethernet", ++ .phy_id_mask = 0xffffffef, ++ .probe = at803x_probe, ++ .config_init = at803x_config_init, ++ .link_change_notify = at803x_link_change_notify, ++ .set_wol = at803x_set_wol, ++ .get_wol = at803x_get_wol, ++ .suspend = at803x_suspend, ++ .resume = at803x_resume, ++ .features = PHY_BASIC_FEATURES, ++ .flags = PHY_HAS_INTERRUPT, ++ .config_aneg = genphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = at803x_ack_interrupt, ++ .config_intr = at803x_config_intr, + } }; + + module_phy_driver(at803x_driver); +@@ -454,6 +474,7 @@ module_phy_driver(at803x_driver); + static struct mdio_device_id __maybe_unused atheros_tbl[] = { + { ATH8030_PHY_ID, 0xffffffef }, + { ATH8031_PHY_ID, 0xffffffef }, ++ { ATH8032_PHY_ID, 0xffffffef }, + { ATH8035_PHY_ID, 0xffffffef }, + { } + }; diff --git a/target/linux/generic/pending-4.9/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.9/734-net-phy-at803x-allow-to-configure-via-pdata.patch index 8bd9ce3bf7..69b21be951 100644 --- a/target/linux/generic/pending-4.9/734-net-phy-at803x-allow-to-configure-via-pdata.patch +++ b/target/linux/generic/pending-4.9/734-net-phy-at803x-allow-to-configure-via-pdata.patch @@ -40,7 +40,7 @@ Signed-off-by: Gabor Juhos #define AT803X_DEBUG_ADDR 0x1D #define AT803X_DEBUG_DATA 0x1E -@@ -71,6 +78,7 @@ MODULE_LICENSE("GPL"); +@@ -72,6 +79,7 @@ MODULE_LICENSE("GPL"); struct at803x_priv { bool phy_reset:1; struct gpio_desc *gpiod_reset; @@ -48,7 +48,7 @@ Signed-off-by: Gabor Juhos }; struct at803x_context { -@@ -274,8 +282,16 @@ does_not_require_reset_workaround: +@@ -276,8 +284,16 @@ does_not_require_reset_workaround: return 0; } @@ -65,7 +65,7 @@ Signed-off-by: Gabor Juhos int ret; ret = genphy_config_init(phydev); -@@ -296,6 +312,26 @@ static int at803x_config_init(struct phy +@@ -298,6 +314,26 @@ static int at803x_config_init(struct phy return ret; } @@ -92,7 +92,7 @@ Signed-off-by: Gabor Juhos return 0; } -@@ -333,6 +369,8 @@ static int at803x_config_intr(struct phy +@@ -335,6 +371,8 @@ static int at803x_config_intr(struct phy static void at803x_link_change_notify(struct phy_device *phydev) { struct at803x_priv *priv = phydev->priv; @@ -100,8 +100,8 @@ Signed-off-by: Gabor Juhos + pdata = dev_get_platdata(&phydev->mdio.dev); /* - * Conduct a hardware reset for AT8030 every time a link loss is -@@ -361,6 +399,24 @@ static void at803x_link_change_notify(st + * Conduct a hardware reset for AT8030/2 every time a link loss is +@@ -363,6 +401,24 @@ static void at803x_link_change_notify(st } else { priv->phy_reset = false; } diff --git a/target/linux/generic/pending-4.9/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/pending-4.9/735-net-phy-at803x-fix-at8033-sgmii-mode.patch index 1f689850bd..485567cd76 100644 --- a/target/linux/generic/pending-4.9/735-net-phy-at803x-fix-at8033-sgmii-mode.patch +++ b/target/linux/generic/pending-4.9/735-net-phy-at803x-fix-at8033-sgmii-mode.patch @@ -24,7 +24,7 @@ Signed-off-by: Roman Yeryomin #define AT803X_MODE_CFG_MASK 0x0F #define AT803X_MODE_CFG_SGMII 0x01 -@@ -293,6 +297,27 @@ static int at803x_config_init(struct phy +@@ -295,6 +299,27 @@ static int at803x_config_init(struct phy { struct at803x_platform_data *pdata; int ret;