From: Krzysztof Hałasa Date: Sat, 20 Dec 2008 00:53:08 +0000 (+0100) Subject: IXP4xx: Add PHYLIB support to Ethernet driver. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2098c18d6cf65358dd1620154bdedbc8c8d36f44;p=openwrt%2Fstaging%2Fblogic.git IXP4xx: Add PHYLIB support to Ethernet driver. Signed-off-by: Krzysztof Hałasa --- diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index abe17762e6f5..2895db13bfa4 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -59,7 +59,7 @@ config EP93XX_ETH config IXP4XX_ETH tristate "Intel IXP4xx Ethernet support" depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR - select MII + select PHYLIB help Say Y here if you want to use built-in Ethernet ports on IXP4xx processor. diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 44679f804be3..db44ebbf45c5 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include #include #include @@ -59,7 +59,6 @@ #define NAPI_WEIGHT 16 #define MDIO_INTERVAL (3 * HZ) #define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */ -#define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */ #define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */ #define NPE_ID(port_id) ((port_id) >> 4) @@ -164,14 +163,13 @@ struct port { struct npe *npe; struct net_device *netdev; struct napi_struct napi; - struct mii_if_info mii; - struct delayed_work mdio_thread; + struct phy_device *phydev; struct eth_plat_info *plat; buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS]; struct desc *desc_tab; /* coherent */ u32 desc_tab_phys; int id; /* logical port ID */ - u16 mii_bmcr; + int speed, duplex; }; /* NPE message structure */ @@ -242,19 +240,20 @@ static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt) static spinlock_t mdio_lock; static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */ +struct mii_bus *mdio_bus; static int ports_open; static struct port *npe_port_tab[MAX_NPES]; static struct dma_pool *dma_pool; -static u16 mdio_cmd(struct net_device *dev, int phy_id, int location, - int write, u16 cmd) +static int ixp4xx_mdio_cmd(struct mii_bus *bus, int phy_id, int location, + int write, u16 cmd) { int cycles = 0; if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) { - printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name); - return 0; + printk(KERN_ERR "%s: MII not ready to transmit\n", bus->name); + return -1; } if (write) { @@ -273,107 +272,119 @@ static u16 mdio_cmd(struct net_device *dev, int phy_id, int location, } if (cycles == MAX_MDIO_RETRIES) { - printk(KERN_ERR "%s: MII write failed\n", dev->name); - return 0; + printk(KERN_ERR "%s #%i: MII write failed\n", bus->name, + phy_id); + return -1; } #if DEBUG_MDIO - printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name, - cycles); + printk(KERN_DEBUG "%s #%i: mdio_%s() took %i cycles\n", bus->name, + phy_id, write ? "write" : "read", cycles); #endif if (write) return 0; if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) { - printk(KERN_ERR "%s: MII read failed\n", dev->name); - return 0; +#if DEBUG_MDIO + printk(KERN_DEBUG "%s #%i: MII read failed\n", bus->name, + phy_id); +#endif + return 0xFFFF; /* don't return error */ } return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) | - (__raw_readl(&mdio_regs->mdio_status[1]) << 8); + ((__raw_readl(&mdio_regs->mdio_status[1]) & 0xFF) << 8); } -static int mdio_read(struct net_device *dev, int phy_id, int location) +static int ixp4xx_mdio_read(struct mii_bus *bus, int phy_id, int location) { unsigned long flags; - u16 val; + int ret; spin_lock_irqsave(&mdio_lock, flags); - val = mdio_cmd(dev, phy_id, location, 0, 0); + ret = ixp4xx_mdio_cmd(bus, phy_id, location, 0, 0); spin_unlock_irqrestore(&mdio_lock, flags); - return val; +#if DEBUG_MDIO + printk(KERN_DEBUG "%s #%i: MII read [%i] -> 0x%X\n", bus->name, + phy_id, location, ret); +#endif + return ret; } -static void mdio_write(struct net_device *dev, int phy_id, int location, - int val) +static int ixp4xx_mdio_write(struct mii_bus *bus, int phy_id, int location, + u16 val) { unsigned long flags; + int ret; spin_lock_irqsave(&mdio_lock, flags); - mdio_cmd(dev, phy_id, location, 1, val); + ret = ixp4xx_mdio_cmd(bus, phy_id, location, 1, val); spin_unlock_irqrestore(&mdio_lock, flags); +#if DEBUG_MDIO + printk(KERN_DEBUG "%s #%i: MII read [%i] <- 0x%X, err = %i\n", + bus->name, phy_id, location, val, ret); +#endif + return ret; } -static void phy_reset(struct net_device *dev, int phy_id) +static int ixp4xx_mdio_register(void) { - struct port *port = netdev_priv(dev); - int cycles = 0; + int err; + + if (!(mdio_bus = mdiobus_alloc())) + return -ENOMEM; - mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET); + /* All MII PHY accesses use NPE-B Ethernet registers */ + spin_lock_init(&mdio_lock); + mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; + __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); - while (cycles < MAX_MII_RESET_RETRIES) { - if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) { -#if DEBUG_MDIO - printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n", - dev->name, cycles); -#endif - return; - } - udelay(1); - cycles++; - } + mdio_bus->name = "IXP4xx MII Bus"; + mdio_bus->read = &ixp4xx_mdio_read; + mdio_bus->write = &ixp4xx_mdio_write; + strcpy(mdio_bus->id, "0"); - printk(KERN_ERR "%s: MII reset failed\n", dev->name); + if ((err = mdiobus_register(mdio_bus))) + mdiobus_free(mdio_bus); + return err; } -static void eth_set_duplex(struct port *port) +static void ixp4xx_mdio_remove(void) { - if (port->mii.full_duplex) - __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX, - &port->regs->tx_control[0]); - else - __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX, - &port->regs->tx_control[0]); + mdiobus_unregister(mdio_bus); + mdiobus_free(mdio_bus); } -static void phy_check_media(struct port *port, int init) +static void ixp4xx_adjust_link(struct net_device *dev) { - if (mii_check_media(&port->mii, 1, init)) - eth_set_duplex(port); - if (port->mii.force_media) { /* mii_check_media() doesn't work */ - struct net_device *dev = port->netdev; - int cur_link = mii_link_ok(&port->mii); - int prev_link = netif_carrier_ok(dev); - - if (!prev_link && cur_link) { - printk(KERN_INFO "%s: link up\n", dev->name); - netif_carrier_on(dev); - } else if (prev_link && !cur_link) { + struct port *port = netdev_priv(dev); + struct phy_device *phydev = port->phydev; + + if (!phydev->link) { + if (port->speed) { + port->speed = 0; printk(KERN_INFO "%s: link down\n", dev->name); - netif_carrier_off(dev); } + return; } -} + if (port->speed == phydev->speed && port->duplex == phydev->duplex) + return; -static void mdio_thread(struct work_struct *work) -{ - struct port *port = container_of(work, struct port, mdio_thread.work); + port->speed = phydev->speed; + port->duplex = phydev->duplex; - phy_check_media(port, 0); - schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL); + if (port->duplex) + __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX, + &port->regs->tx_control[0]); + else + __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX, + &port->regs->tx_control[0]); + + printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n", + dev->name, port->speed, port->duplex ? "full" : "half"); } @@ -777,16 +788,9 @@ static void eth_set_mcast_list(struct net_device *dev) static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd) { - struct port *port = netdev_priv(dev); - unsigned int duplex_chg; - int err; - if (!netif_running(dev)) return -EINVAL; - err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg); - if (duplex_chg) - eth_set_duplex(port); - return err; + return -EINVAL; } @@ -938,8 +942,6 @@ static int eth_open(struct net_device *dev) } } - mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr); - memset(&msg, 0, sizeof(msg)); msg.cmd = NPE_VLAN_SETRXQOSENTRY; msg.eth_id = port->id; @@ -977,6 +979,9 @@ static int eth_open(struct net_device *dev) return err; } + port->speed = 0; /* force "link up" message */ + phy_start(port->phydev); + for (i = 0; i < ETH_ALEN; i++) __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]); __raw_writel(0x08, &port->regs->random_seed); @@ -1004,10 +1009,8 @@ static int eth_open(struct net_device *dev) __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]); napi_enable(&port->napi); - phy_check_media(port, 1); eth_set_mcast_list(dev); netif_start_queue(dev); - schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL); qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY, eth_rx_irq, dev); @@ -1098,14 +1101,10 @@ static int eth_close(struct net_device *dev) printk(KERN_CRIT "%s: unable to disable loopback\n", dev->name); - port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) & - ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */ - mdio_write(dev, port->plat->phy, MII_BMCR, - port->mii_bmcr | BMCR_PDOWN); + phy_stop(port->phydev); if (!ports_open) qmgr_disable_irq(TXDONE_QUEUE); - cancel_rearming_delayed_work(&port->mdio_thread); destroy_queues(port); release_queues(port); return 0; @@ -1117,6 +1116,7 @@ static int __devinit eth_init_one(struct platform_device *pdev) struct net_device *dev; struct eth_plat_info *plat = pdev->dev.platform_data; u32 regs_phys; + char phy_id[BUS_ID_SIZE]; int err; if (!(dev = alloc_etherdev(sizeof(struct port)))) @@ -1182,22 +1182,19 @@ static int __devinit eth_init_one(struct platform_device *pdev) __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control); udelay(50); - port->mii.dev = dev; - port->mii.mdio_read = mdio_read; - port->mii.mdio_write = mdio_write; - port->mii.phy_id = plat->phy; - port->mii.phy_id_mask = 0x1F; - port->mii.reg_num_mask = 0x1F; + snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy); + port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + if (IS_ERR(port->phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(port->phydev); + } + + port->phydev->irq = PHY_POLL; printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy, npe_name(port->npe)); - phy_reset(dev, plat->phy); - port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) & - ~(BMCR_RESET | BMCR_PDOWN); - mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN); - - INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread); return 0; err_unreg: @@ -1231,20 +1228,19 @@ static struct platform_driver ixp4xx_eth_driver = { static int __init eth_init_module(void) { + int err; if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) return -ENOSYS; - /* All MII PHY accesses use NPE-B Ethernet registers */ - spin_lock_init(&mdio_lock); - mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; - __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); - + if ((err = ixp4xx_mdio_register())) + return err; return platform_driver_register(&ixp4xx_eth_driver); } static void __exit eth_cleanup_module(void) { platform_driver_unregister(&ixp4xx_eth_driver); + ixp4xx_mdio_remove(); } MODULE_AUTHOR("Krzysztof Halasa");