From: Sarah Sharp Date: Fri, 28 Aug 2009 21:28:15 +0000 (-0700) Subject: USB: xhci: Check URB_SHORT_NOT_OK before setting short packet status. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=204970a4bb2f584afc430ae330cd44aee329cea4;p=openwrt%2Fstaging%2Fblogic.git USB: xhci: Check URB_SHORT_NOT_OK before setting short packet status. Make sure that the driver that submitted the URB considers a short packet an error before setting -EREMOTEIO during a short control transfer. Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b4fab00105d4..d264f9a6c559 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -991,7 +991,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, break; case COMP_SHORT_TX: xhci_warn(xhci, "WARN: short transfer on control ep\n"); - status = -EREMOTEIO; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + status = -EREMOTEIO; + else + status = 0; break; case COMP_BABBLE: /* The 0.96 spec says a babbling control endpoint @@ -1034,7 +1037,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (event_trb == td->last_trb) { if (td->urb->actual_length != 0) { /* Don't overwrite a previously set error code */ - if (status == -EINPROGRESS || status == 0) + if ((status == -EINPROGRESS || + status == 0) && + (td->urb->transfer_flags + & URB_SHORT_NOT_OK)) /* Did we already see a short data stage? */ status = -EREMOTEIO; } else {