From: Zoltan Herpai Date: Fri, 31 Jul 2015 12:22:12 +0000 (+0000) Subject: mxs: add support for 4.1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=202e74672663edba6400d475dd0c23b46a77b43b;p=openwrt%2Fstaging%2Flynxis%2Fomap.git mxs: add support for 4.1 Signed-off-by: Zoltan HERPAI SVN-Revision: 46525 --- diff --git a/target/linux/mxs/config-4.1 b/target/linux/mxs/config-4.1 new file mode 100644 index 0000000000..b83744232f --- /dev/null +++ b/target/linux/mxs/config-4.1 @@ -0,0 +1,297 @@ +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_AMBA_PL08X is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +CONFIG_ARCH_MULTI_CPU_AUTO=y +# CONFIG_ARCH_MULTI_V4 is not set +# CONFIG_ARCH_MULTI_V4T is not set +CONFIG_ARCH_MULTI_V4_V5=y +CONFIG_ARCH_MULTI_V5=y +CONFIG_ARCH_MXS=y +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARM=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +# CONFIG_ARM_CPUIDLE is not set +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_PATCH_PHYS_VIRT=y +# CONFIG_ARM_SP805_WATCHDOG is not set +CONFIG_ARM_THUMB=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait" +CONFIG_CMDLINE_FROM_BOOTLOADER=y +CONFIG_COMMON_CLK=y +CONFIG_COREDUMP=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_ARM926T=y +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_PM=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_USE_DOMAINS=y +CONFIG_CRC16=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_DEV_MXS_DCP is not set +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HW=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DTC=y +CONFIG_EXT4_FS=y +CONFIG_FEC=y +CONFIG_FRAME_POINTER=y +# CONFIG_FSL_PQ_MDIO is not set +CONFIG_FS_MBCACHE=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_MXS=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +# CONFIG_HAVE_ARCH_BITREVERSE is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCA=y +CONFIG_I2C_ALGOPCF=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_MUX=y +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +CONFIG_I2C_MUX_PINCTRL=y +# CONFIG_I2C_MXS is not set +CONFIG_IIO=y +CONFIG_IIO_BUFFER=y +CONFIG_IIO_KFIFO_BUF=y +CONFIG_IIO_PERIODIC_RTC_TRIGGER=y +CONFIG_IIO_SYSFS_TRIGGER=y +CONFIG_IIO_TRIGGER=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=y +CONFIG_IOMMU_HELPER=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +# CONFIG_ISDN is not set +CONFIG_JBD2=y +# CONFIG_LEDS_REGULATOR is not set +CONFIG_LIBFDT=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MFD_SYSCON=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_MXS=y +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MXS_DMA=y +# CONFIG_MXS_LRADC is not set +CONFIG_MXS_POWER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_KUSER_HELPERS=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NLS=y +CONFIG_NO_BOOTMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS_GENERIC is not set +# CONFIG_PCI_SYSCALL is not set +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX23=y +CONFIG_PINCTRL_IMX28=y +CONFIG_PINCTRL_MXS=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PL330_DMA is not set +CONFIG_PM=y +CONFIG_PM_CLK=y +# CONFIG_PM_DEBUG is not set +CONFIG_POWER_SUPPLY=y +CONFIG_PPS=y +CONFIG_PTP_1588_CLOCK=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MXS=y +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_STMP is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SCHED_HRTICK=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_MXS_AUART=y +CONFIG_SERIAL_MXS_AUART_CONSOLE=y +CONFIG_SMSC_PHY=y +CONFIG_SOC_BUS=y +CONFIG_SOC_IMX23=y +CONFIG_SOC_IMX28=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +# CONFIG_SPI_MXS is not set +CONFIG_SPLIT_PTLOCK_CPUS=999999 +CONFIG_SRCU=y +CONFIG_STMP_DEVICE=y +CONFIG_SWIOTLB=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_MXS_PHY is not set +CONFIG_USB_OTG=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VFP is not set +CONFIG_WATCHDOG_CORE=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/mxs/patches-4.1/100-mxs-select-syscon.patch b/target/linux/mxs/patches-4.1/100-mxs-select-syscon.patch new file mode 100644 index 0000000000..96173c12fb --- /dev/null +++ b/target/linux/mxs/patches-4.1/100-mxs-select-syscon.patch @@ -0,0 +1,12 @@ +diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig +index 8479413..bf04d38 100644 +--- a/arch/arm/mach-mxs/Kconfig ++++ b/arch/arm/mach-mxs/Kconfig +@@ -17,6 +17,7 @@ config ARCH_MXS + depends on ARCH_MULTI_V5 + select ARCH_REQUIRE_GPIOLIB + select CLKSRC_MMIO ++ select MFD_SYSCON + select PINCTRL + select SOC_BUS + select SOC_IMX23 diff --git a/target/linux/mxs/patches-4.1/101-mxs-add-mxs_power.patch b/target/linux/mxs/patches-4.1/101-mxs-add-mxs_power.patch new file mode 100644 index 0000000000..8c087dcb98 --- /dev/null +++ b/target/linux/mxs/patches-4.1/101-mxs-add-mxs_power.patch @@ -0,0 +1,173 @@ +diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig +index 4091fb0..0fcc158 100644 +--- a/drivers/power/Kconfig ++++ b/drivers/power/Kconfig +@@ -43,6 +43,14 @@ config MAX8925_POWER + Say Y here to enable support for the battery charger in the Maxim + MAX8925 PMIC. + ++config MXS_POWER ++ tristate "Freescale MXS power subsystem support" ++ depends on ARCH_MXS || COMPILE_TEST ++ help ++ Say Y here to enable support for the Freescale i.MX23/i.MX28 ++ power subsystem. This is a requirement to get access to on-chip ++ regulators, battery charger and many more. ++ + config WM831X_BACKUP + tristate "WM831X backup battery charger support" + depends on MFD_WM831X +diff --git a/drivers/power/Makefile b/drivers/power/Makefile +index b7b0181..8edcad7 100644 +--- a/drivers/power/Makefile ++++ b/drivers/power/Makefile +@@ -10,6 +10,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o + obj-$(CONFIG_PDA_POWER) += pda_power.o + obj-$(CONFIG_APM_POWER) += apm_power.o + obj-$(CONFIG_MAX8925_POWER) += max8925_power.o ++obj-$(CONFIG_MXS_POWER) += mxs_power.o + obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o + obj-$(CONFIG_WM831X_POWER) += wm831x_power.o + obj-$(CONFIG_WM8350_POWER) += wm8350_power.o +diff --git a/drivers/power/mxs_power.c b/drivers/power/mxs_power.c +new file mode 100644 +index 0000000..669bfb1 +--- /dev/null ++++ b/drivers/power/mxs_power.c +@@ -0,0 +1,136 @@ ++/* ++ * Freescale MXS power subsystem ++ * ++ * Copyright (C) 2014 Stefan Wahren ++ * ++ * Inspired by imx-bootlets ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define BM_POWER_CTRL_POLARITY_VBUSVALID BIT(5) ++#define BM_POWER_CTRL_VBUSVALID_IRQ BIT(4) ++#define BM_POWER_CTRL_ENIRQ_VBUS_VALID BIT(3) ++ ++#define HW_POWER_5VCTRL_OFFSET 0x10 ++ ++#define BM_POWER_5VCTRL_VBUSVALID_THRESH (7 << 8) ++#define BM_POWER_5VCTRL_PWDN_5VBRNOUT BIT(7) ++#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT BIT(6) ++#define BM_POWER_5VCTRL_VBUSVALID_5VDETECT BIT(4) ++ ++#define HW_POWER_5VCTRL_VBUSVALID_THRESH_4_40V (5 << 8) ++ ++struct mxs_power_data { ++ void __iomem *base_addr; ++ struct power_supply *ac; ++}; ++ ++static enum power_supply_property mxs_power_ac_props[] = { ++ POWER_SUPPLY_PROP_ONLINE, ++}; ++ ++static int mxs_power_ac_get_property(struct power_supply *psy, ++ enum power_supply_property psp, ++ union power_supply_propval *val) ++{ ++ int ret = 0; ++ ++ switch (psp) { ++ case POWER_SUPPLY_PROP_ONLINE: ++ val->intval = 1; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ return ret; ++} ++ ++static const struct of_device_id of_mxs_power_match[] = { ++ { .compatible = "fsl,imx23-power" }, ++ { .compatible = "fsl,imx28-power" }, ++ { /* end */ } ++}; ++MODULE_DEVICE_TABLE(of, of_mxs_power_match); ++ ++static const struct power_supply_desc ac_desc = { ++ .properties = mxs_power_ac_props, ++ .num_properties = ARRAY_SIZE(mxs_power_ac_props), ++ .get_property = mxs_power_ac_get_property, ++ .name = "ac", ++ .type = POWER_SUPPLY_TYPE_MAINS, ++}; ++ ++static int mxs_power_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct resource *res; ++ struct mxs_power_data *data; ++ struct power_supply_config psy_cfg = {}; ++ void __iomem *v5ctrl_addr; ++ ++ if (!np) { ++ dev_err(dev, "missing device tree\n"); ++ return -EINVAL; ++ } ++ ++ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); ++ if (!data) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ data->base_addr = devm_ioremap_resource(dev, res); ++ if (IS_ERR(data->base_addr)) ++ return PTR_ERR(data->base_addr); ++ ++ psy_cfg.drv_data = data; ++ ++ data->ac = devm_power_supply_register(dev, &ac_desc, &psy_cfg); ++ if (IS_ERR(data->ac)) ++ return PTR_ERR(data->ac); ++ ++ platform_set_drvdata(pdev, data); ++ ++ v5ctrl_addr = data->base_addr + HW_POWER_5VCTRL_OFFSET; ++ ++ /* Make sure the current limit of the linregs are disabled. */ ++ writel(BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT, ++ v5ctrl_addr + STMP_OFFSET_REG_CLR); ++ ++ return of_platform_populate(np, NULL, NULL, dev); ++} ++ ++static struct platform_driver mxs_power_driver = { ++ .driver = { ++ .name = "mxs_power", ++ .of_match_table = of_mxs_power_match, ++ }, ++ .probe = mxs_power_probe, ++}; ++ ++module_platform_driver(mxs_power_driver); ++ ++MODULE_AUTHOR("Stefan Wahren "); ++MODULE_DESCRIPTION("Freescale MXS power subsystem"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/mxs/patches-4.1/102-mxs-add-regulator-driver.patch b/target/linux/mxs/patches-4.1/102-mxs-add-regulator-driver.patch new file mode 100644 index 0000000000..7ca14f114c --- /dev/null +++ b/target/linux/mxs/patches-4.1/102-mxs-add-regulator-driver.patch @@ -0,0 +1,577 @@ +diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig +index a6f116a..7b525f5 100644 +--- a/drivers/regulator/Kconfig ++++ b/drivers/regulator/Kconfig +@@ -450,6 +450,14 @@ config REGULATOR_MT6397 + This driver supports the control of different power rails of device + through regulator interface. + ++config REGULATOR_MXS ++ tristate "Freescale MXS on-chip regulators" ++ depends on (MXS_POWER || COMPILE_TEST) ++ help ++ Say y here to support Freescale MXS on-chip regulators. ++ It is recommended that this option be enabled on i.MX23, ++ i.MX28 platform. ++ + config REGULATOR_PALMAS + tristate "TI Palmas PMIC Regulators" + depends on MFD_PALMAS +diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile +index 2c4da15..a3ebf23 100644 +--- a/drivers/regulator/Makefile ++++ b/drivers/regulator/Makefile +@@ -60,6 +60,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o + obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o + obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o + obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o ++obj-$(CONFIG_REGULATOR_MXS) += mxs-regulator.o + obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o + obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o + obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o +diff --git a/drivers/regulator/mxs-regulator.c b/drivers/regulator/mxs-regulator.c +new file mode 100644 +index 0000000..e53707b +--- /dev/null ++++ b/drivers/regulator/mxs-regulator.c +@@ -0,0 +1,540 @@ ++/* ++ * Freescale MXS on-chip regulators ++ * ++ * Embedded Alley Solutions, Inc ++ * ++ * Copyright (C) 2014 Stefan Wahren ++ * Copyright (C) 2010 Freescale Semiconductor, Inc. ++ * Copyright (C) 2008 Embedded Alley Solutions, Inc All Rights Reserved. ++ * ++ * Inspired by imx-bootlets ++ */ ++ ++/* ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Powered by linear regulator. DCDC output is gated off and ++ the linreg output is equal to the target. */ ++#define HW_POWER_LINREG_DCDC_OFF 1 ++ ++/* Powered by linear regulator. DCDC output is not gated off ++ and is ready for the automatic hardware transistion after a 5V ++ event. The converters are not enabled when 5V is present. LinReg output ++ is 25mV below target. */ ++#define HW_POWER_LINREG_DCDC_READY 2 ++ ++/* Powered by DCDC converter and the LinReg is on. LinReg output ++ is 25mV below target. */ ++#define HW_POWER_DCDC_LINREG_ON 3 ++ ++/* Powered by DCDC converter and the LinReg is off. LinReg output ++ is 25mV below target. */ ++#define HW_POWER_DCDC_LINREG_OFF 4 ++ ++/* Powered by DCDC converter and the LinReg is ready for the ++ automatic hardware transfer. The LinReg output is not enabled and ++ depends on the 5V presence to enable the LinRegs. LinReg offset is 25mV ++ below target. */ ++#define HW_POWER_DCDC_LINREG_READY 5 ++ ++/* Powered by an external source when 5V is present. This does not ++ necessarily mean the external source is powered by 5V,but the chip needs ++ to be aware that 5V is present. */ ++#define HW_POWER_EXTERNAL_SOURCE_5V 6 ++ ++/* Powered by an external source when 5V is not present.This doesn't ++ necessarily mean the external source is powered by the battery, but the ++ chip needs to be aware that the battery is present */ ++#define HW_POWER_EXTERNAL_SOURCE_BATTERY 7 ++ ++/* Unknown configuration. This is an error. */ ++#define HW_POWER_UNKNOWN_SOURCE 8 ++ ++/* TODO: Move power register offsets into header file */ ++#define HW_POWER_5VCTRL 0x00000010 ++#define HW_POWER_VDDDCTRL 0x00000040 ++#define HW_POWER_VDDACTRL 0x00000050 ++#define HW_POWER_VDDIOCTRL 0x00000060 ++#define HW_POWER_MISC 0x00000090 ++#define HW_POWER_STS 0x000000c0 ++ ++#define BM_POWER_STS_VBUSVALID0_STATUS BIT(15) ++#define BM_POWER_STS_DC_OK BIT(9) ++ ++#define BM_POWER_5VCTRL_ILIMIT_EQ_ZERO BIT(2) ++#define BM_POWER_5VCTRL_ENABLE_DCDC BIT(0) ++ ++#define BM_POWER_LINREG_OFFSET_DCDC_MODE BIT(1) ++ ++#define SHIFT_FREQSEL 4 ++ ++#define BM_POWER_MISC_FREQSEL (7 << SHIFT_FREQSEL) ++ ++/* Recommended DC-DC clock source values */ ++#define HW_POWER_MISC_FREQSEL_20000_KHZ 1 ++#define HW_POWER_MISC_FREQSEL_24000_KHZ 2 ++#define HW_POWER_MISC_FREQSEL_19200_KHZ 3 ++ ++#define HW_POWER_MISC_SEL_PLLCLK BIT(0) ++ ++/* Regulator IDs */ ++#define MXS_DCDC 1 ++#define MXS_VDDIO 2 ++#define MXS_VDDA 3 ++#define MXS_VDDD 4 ++ ++struct mxs_reg_info { ++ /* regulator descriptor */ ++ struct regulator_desc desc; ++ ++ /* regulator control register */ ++ int ctrl_reg; ++ ++ /* disable DC-DC output */ ++ unsigned int disable_fet_mask; ++ ++ /* steps between linreg output and DC-DC target */ ++ unsigned int linreg_offset_mask; ++ u8 linreg_offset_shift; ++ ++ /* function which determine power source */ ++ u8 (*get_power_source)(struct regulator_dev *); ++}; ++ ++static inline u8 get_linreg_offset(struct mxs_reg_info *ldo, u32 regs) ++{ ++ return (regs & ldo->linreg_offset_mask) >> ldo->linreg_offset_shift; ++} ++ ++static u8 get_vddio_power_source(struct regulator_dev *reg) ++{ ++ struct mxs_reg_info *ldo = rdev_get_drvdata(reg); ++ u32 v5ctrl, status, base; ++ u8 offset; ++ ++ if (regmap_read(reg->regmap, HW_POWER_5VCTRL, &v5ctrl)) ++ return HW_POWER_UNKNOWN_SOURCE; ++ ++ if (regmap_read(reg->regmap, HW_POWER_STS, &status)) ++ return HW_POWER_UNKNOWN_SOURCE; ++ ++ if (regmap_read(reg->regmap, ldo->ctrl_reg, &base)) ++ return HW_POWER_UNKNOWN_SOURCE; ++ ++ offset = get_linreg_offset(ldo, base); ++ ++ /* If VBUS valid then 5 V power supply present */ ++ if (status & BM_POWER_STS_VBUSVALID0_STATUS) { ++ /* Powered by Linreg, DC-DC is off */ ++ if ((base & ldo->disable_fet_mask) && ++ !(offset & BM_POWER_LINREG_OFFSET_DCDC_MODE)) { ++ return HW_POWER_LINREG_DCDC_OFF; ++ } ++ ++ if (v5ctrl & BM_POWER_5VCTRL_ENABLE_DCDC) { ++ /* Powered by DC-DC, Linreg is on */ ++ if (offset & BM_POWER_LINREG_OFFSET_DCDC_MODE) ++ return HW_POWER_DCDC_LINREG_ON; ++ } else { ++ /* Powered by Linreg, DC-DC is off */ ++ if (!(offset & BM_POWER_LINREG_OFFSET_DCDC_MODE)) ++ return HW_POWER_LINREG_DCDC_OFF; ++ } ++ } else { ++ /* Powered by DC-DC, Linreg is on */ ++ if (offset & BM_POWER_LINREG_OFFSET_DCDC_MODE) ++ return HW_POWER_DCDC_LINREG_ON; ++ } ++ ++ return HW_POWER_UNKNOWN_SOURCE; ++} ++ ++static u8 get_vdda_vddd_power_source(struct regulator_dev *reg) ++{ ++ struct mxs_reg_info *ldo = rdev_get_drvdata(reg); ++ struct regulator_desc *desc = &ldo->desc; ++ u32 v5ctrl, status, base; ++ u8 offset; ++ ++ if (regmap_read(reg->regmap, HW_POWER_5VCTRL, &v5ctrl)) ++ return HW_POWER_UNKNOWN_SOURCE; ++ ++ if (regmap_read(reg->regmap, HW_POWER_STS, &status)) ++ return HW_POWER_UNKNOWN_SOURCE; ++ ++ if (regmap_read(reg->regmap, ldo->ctrl_reg, &base)) ++ return HW_POWER_UNKNOWN_SOURCE; ++ ++ offset = get_linreg_offset(ldo, base); ++ ++ /* DC-DC output is disabled */ ++ if (base & ldo->disable_fet_mask) { ++ /* Powered by 5 V supply */ ++ if (status & BM_POWER_STS_VBUSVALID0_STATUS) ++ return HW_POWER_EXTERNAL_SOURCE_5V; ++ ++ /* Powered by Linreg, DC-DC is off */ ++ if (!(offset & BM_POWER_LINREG_OFFSET_DCDC_MODE)) ++ return HW_POWER_LINREG_DCDC_OFF; ++ } ++ ++ /* If VBUS valid then 5 V power supply present */ ++ if (status & BM_POWER_STS_VBUSVALID0_STATUS) { ++ /* Powered by DC-DC, Linreg is on */ ++ if (v5ctrl & BM_POWER_5VCTRL_ENABLE_DCDC) ++ return HW_POWER_DCDC_LINREG_ON; ++ ++ /* Powered by Linreg, DC-DC is off */ ++ return HW_POWER_LINREG_DCDC_OFF; ++ } ++ ++ /* DC-DC is on */ ++ if (offset & BM_POWER_LINREG_OFFSET_DCDC_MODE) { ++ /* Powered by DC-DC, Linreg is on */ ++ if (base & desc->enable_mask) ++ return HW_POWER_DCDC_LINREG_ON; ++ ++ /* Powered by DC-DC, Linreg is off */ ++ return HW_POWER_DCDC_LINREG_OFF; ++ } ++ ++ return HW_POWER_UNKNOWN_SOURCE; ++} ++ ++static int mxs_set_dcdc_freq(struct regulator_dev *reg, u32 hz) ++{ ++ struct mxs_reg_info *dcdc = rdev_get_drvdata(reg); ++ u32 val; ++ int ret; ++ ++ if (dcdc->desc.id != MXS_DCDC) { ++ dev_warn(®->dev, "Setting switching freq is not supported\n"); ++ return -EINVAL; ++ } ++ ++ ret = regmap_read(reg->regmap, HW_POWER_MISC, &val); ++ if (ret) ++ return ret; ++ ++ val &= ~BM_POWER_MISC_FREQSEL; ++ val &= ~HW_POWER_MISC_SEL_PLLCLK; ++ ++ /* ++ * Select the PLL/PFD based frequency that the DC-DC converter uses. ++ * The actual switching frequency driving the power inductor is ++ * DCDC_CLK/16. Accept only values recommend by Freescale. ++ */ ++ switch (hz) { ++ case 1200000: ++ val |= HW_POWER_MISC_FREQSEL_19200_KHZ << SHIFT_FREQSEL; ++ break; ++ case 1250000: ++ val |= HW_POWER_MISC_FREQSEL_20000_KHZ << SHIFT_FREQSEL; ++ break; ++ case 1500000: ++ val |= HW_POWER_MISC_FREQSEL_24000_KHZ << SHIFT_FREQSEL; ++ break; ++ default: ++ dev_warn(®->dev, "Switching freq: %u Hz not supported\n", ++ hz); ++ return -EINVAL; ++ } ++ ++ /* First program FREQSEL */ ++ ret = regmap_write(reg->regmap, HW_POWER_MISC, val); ++ if (ret) ++ return ret; ++ ++ /* then set PLL as clock for DC-DC converter */ ++ val |= HW_POWER_MISC_SEL_PLLCLK; ++ ++ return regmap_write(reg->regmap, HW_POWER_MISC, val); ++} ++ ++static int mxs_ldo_set_voltage_sel(struct regulator_dev *reg, unsigned sel) ++{ ++ struct mxs_reg_info *ldo = rdev_get_drvdata(reg); ++ struct regulator_desc *desc = &ldo->desc; ++ u32 status = 0; ++ int timeout; ++ int ret; ++ ++ ret = regmap_update_bits(reg->regmap, desc->vsel_reg, desc->vsel_mask, ++ sel); ++ if (ret) ++ return ret; ++ ++ if (ldo->get_power_source) { ++ switch (ldo->get_power_source(reg)) { ++ case HW_POWER_LINREG_DCDC_OFF: ++ case HW_POWER_LINREG_DCDC_READY: ++ case HW_POWER_EXTERNAL_SOURCE_5V: ++ /* ++ * Since the DC-DC converter is off we can't ++ * trigger on DC_OK. So wait at least 1 ms ++ * for stabilization. ++ */ ++ usleep_range(1000, 2000); ++ return 0; ++ } ++ } ++ ++ /* Make sure DC_OK has changed */ ++ usleep_range(15, 20); ++ ++ for (timeout = 0; timeout < 20; timeout++) { ++ ret = regmap_read(reg->regmap, HW_POWER_STS, &status); ++ ++ if (ret) ++ break; ++ ++ /* DC-DC converter control loop has stabilized */ ++ if (status & BM_POWER_STS_DC_OK) ++ return 0; ++ ++ udelay(1); ++ } ++ ++ if (!ret) ++ dev_warn_ratelimited(®->dev, "%s: timeout status=0x%08x\n", ++ __func__, status); ++ ++ msleep(20); ++ ++ return -ETIMEDOUT; ++} ++ ++static int mxs_ldo_is_enabled(struct regulator_dev *reg) ++{ ++ struct mxs_reg_info *ldo = rdev_get_drvdata(reg); ++ ++ if (ldo->get_power_source) { ++ switch (ldo->get_power_source(reg)) { ++ case HW_POWER_LINREG_DCDC_OFF: ++ case HW_POWER_LINREG_DCDC_READY: ++ case HW_POWER_DCDC_LINREG_ON: ++ return 1; ++ } ++ } ++ ++ return 0; ++} ++ ++static struct regulator_ops mxs_dcdc_ops = { ++ .is_enabled = regulator_is_enabled_regmap, ++}; ++ ++static struct regulator_ops mxs_ldo_ops = { ++ .list_voltage = regulator_list_voltage_linear, ++ .map_voltage = regulator_map_voltage_linear, ++ .set_voltage_sel = mxs_ldo_set_voltage_sel, ++ .get_voltage_sel = regulator_get_voltage_sel_regmap, ++ .is_enabled = mxs_ldo_is_enabled, ++}; ++ ++static const struct mxs_reg_info mxs_info_dcdc = { ++ .desc = { ++ .name = "dcdc", ++ .id = MXS_DCDC, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++ .ops = &mxs_dcdc_ops, ++ .enable_reg = HW_POWER_STS, ++ .enable_mask = (1 << 0), ++ }, ++}; ++ ++static const struct mxs_reg_info imx23_info_vddio = { ++ .desc = { ++ .name = "vddio", ++ .id = MXS_VDDIO, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++ .n_voltages = 0x20, ++ .uV_step = 25000, ++ .linear_min_sel = 0, ++ .min_uV = 2800000, ++ .vsel_reg = HW_POWER_VDDIOCTRL, ++ .vsel_mask = 0x1f, ++ .ops = &mxs_ldo_ops, ++ }, ++ .ctrl_reg = HW_POWER_VDDIOCTRL, ++ .disable_fet_mask = 1 << 16, ++ .linreg_offset_mask = 3 << 12, ++ .linreg_offset_shift = 12, ++ .get_power_source = get_vddio_power_source, ++}; ++ ++static const struct mxs_reg_info imx28_info_vddio = { ++ .desc = { ++ .name = "vddio", ++ .id = MXS_VDDIO, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++ .n_voltages = 0x11, ++ .uV_step = 50000, ++ .linear_min_sel = 0, ++ .min_uV = 2800000, ++ .vsel_reg = HW_POWER_VDDIOCTRL, ++ .vsel_mask = 0x1f, ++ .ops = &mxs_ldo_ops, ++ }, ++ .ctrl_reg = HW_POWER_VDDIOCTRL, ++ .disable_fet_mask = 1 << 16, ++ .linreg_offset_mask = 3 << 12, ++ .linreg_offset_shift = 12, ++ .get_power_source = get_vddio_power_source, ++}; ++ ++static const struct mxs_reg_info mxs_info_vdda = { ++ .desc = { ++ .name = "vdda", ++ .id = MXS_VDDA, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++ .n_voltages = 0x20, ++ .uV_step = 25000, ++ .linear_min_sel = 0, ++ .min_uV = 1500000, ++ .vsel_reg = HW_POWER_VDDACTRL, ++ .vsel_mask = 0x1f, ++ .ops = &mxs_ldo_ops, ++ .enable_mask = (1 << 17), ++ }, ++ .ctrl_reg = HW_POWER_VDDACTRL, ++ .disable_fet_mask = 1 << 16, ++ .linreg_offset_mask = 3 << 12, ++ .linreg_offset_shift = 12, ++ .get_power_source = get_vdda_vddd_power_source, ++}; ++ ++static const struct mxs_reg_info mxs_info_vddd = { ++ .desc = { ++ .name = "vddd", ++ .id = MXS_VDDD, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++ .n_voltages = 0x20, ++ .uV_step = 25000, ++ .linear_min_sel = 0, ++ .min_uV = 800000, ++ .vsel_reg = HW_POWER_VDDDCTRL, ++ .vsel_mask = 0x1f, ++ .ops = &mxs_ldo_ops, ++ .enable_mask = (1 << 21), ++ }, ++ .ctrl_reg = HW_POWER_VDDDCTRL, ++ .disable_fet_mask = 1 << 20, ++ .linreg_offset_mask = 3 << 16, ++ .linreg_offset_shift = 16, ++ .get_power_source = get_vdda_vddd_power_source, ++}; ++ ++static const struct of_device_id of_mxs_regulator_match[] = { ++ { .compatible = "fsl,imx23-dcdc", .data = &mxs_info_dcdc }, ++ { .compatible = "fsl,imx28-dcdc", .data = &mxs_info_dcdc }, ++ { .compatible = "fsl,imx23-vddio", .data = &imx23_info_vddio }, ++ { .compatible = "fsl,imx23-vdda", .data = &mxs_info_vdda }, ++ { .compatible = "fsl,imx23-vddd", .data = &mxs_info_vddd }, ++ { .compatible = "fsl,imx28-vddio", .data = &imx28_info_vddio }, ++ { .compatible = "fsl,imx28-vdda", .data = &mxs_info_vdda }, ++ { .compatible = "fsl,imx28-vddd", .data = &mxs_info_vddd }, ++ { /* end */ } ++}; ++MODULE_DEVICE_TABLE(of, of_mxs_regulator_match); ++ ++static int mxs_regulator_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ const struct of_device_id *match; ++ struct device_node *parent_np; ++ struct regulator_dev *rdev = NULL; ++ struct mxs_reg_info *info; ++ struct regulator_init_data *initdata; ++ struct regulator_config config = { }; ++ u32 switch_freq; ++ ++ match = of_match_device(of_mxs_regulator_match, dev); ++ if (!match) { ++ /* We do not expect this to happen */ ++ dev_err(dev, "%s: Unable to match device\n", __func__); ++ return -ENODEV; ++ } ++ ++ info = devm_kmemdup(dev, match->data, sizeof(struct mxs_reg_info), ++ GFP_KERNEL); ++ if (!info) ++ return -ENOMEM; ++ ++ initdata = of_get_regulator_init_data(dev, dev->of_node, &info->desc); ++ if (!initdata) { ++ dev_err(dev, "missing regulator init data\n"); ++ return -EINVAL; ++ } ++ ++ parent_np = of_get_parent(dev->of_node); ++ if (!parent_np) ++ return -ENODEV; ++ config.regmap = syscon_node_to_regmap(parent_np); ++ of_node_put(parent_np); ++ if (IS_ERR(config.regmap)) ++ return PTR_ERR(config.regmap); ++ ++ config.dev = dev; ++ config.init_data = initdata; ++ config.driver_data = info; ++ config.of_node = dev->of_node; ++ ++ rdev = devm_regulator_register(dev, &info->desc, &config); ++ if (IS_ERR(rdev)) { ++ int ret = PTR_ERR(rdev); ++ ++ dev_err(dev, "%s: failed to register regulator(%d)\n", ++ __func__, ret); ++ return ret; ++ } ++ ++ if (!of_property_read_u32(dev->of_node, "switching-frequency", ++ &switch_freq)) ++ mxs_set_dcdc_freq(rdev, switch_freq); ++ ++ platform_set_drvdata(pdev, rdev); ++ ++ return 0; ++} ++ ++static struct platform_driver mxs_regulator_driver = { ++ .driver = { ++ .name = "mxs_regulator", ++ .of_match_table = of_mxs_regulator_match, ++ }, ++ .probe = mxs_regulator_probe, ++}; ++ ++module_platform_driver(mxs_regulator_driver); ++ ++MODULE_AUTHOR("Stefan Wahren "); ++MODULE_DESCRIPTION("Freescale MXS regulators"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:mxs_regulator"); diff --git a/target/linux/mxs/patches-4.1/103-dt-enable-regulator.patch b/target/linux/mxs/patches-4.1/103-dt-enable-regulator.patch new file mode 100644 index 0000000000..3fed18257d --- /dev/null +++ b/target/linux/mxs/patches-4.1/103-dt-enable-regulator.patch @@ -0,0 +1,104 @@ +diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi +index bbcfb5a..efdd702 100644 +--- a/arch/arm/boot/dts/imx23.dtsi ++++ b/arch/arm/boot/dts/imx23.dtsi +@@ -404,8 +404,46 @@ + }; + + power@80044000 { ++ compatible = "fsl,imx23-power", "syscon"; + reg = <0x80044000 0x2000>; +- status = "disabled"; ++ interrupts = <3>; ++ ++ dcdc: regulator@1 { ++ compatible = "fsl,imx23-dcdc"; ++ regulator-name = "dcdc"; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ reg_vddd: regulator@2 { ++ compatible = "fsl,imx23-vddd"; ++ regulator-name = "vddd"; ++ regulator-min-microvolt = <1350000>; ++ regulator-max-microvolt = <1550000>; ++ vddd-supply = <®_vdda>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ reg_vdda: regulator@3 { ++ compatible = "fsl,imx23-vdda"; ++ regulator-name = "vdda"; ++ regulator-min-microvolt = <1725000>; ++ regulator-max-microvolt = <1950000>; ++ vdda-supply = <®_vddio>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ reg_vddio: regulator@4 { ++ compatible = "fsl,imx23-vddio"; ++ regulator-name = "vddio"; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3575000>; ++ regulator-microvolt-offset = <80000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; + }; + + saif1: saif@80046000 { +diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi +index 25e25f8..378b1f2 100644 +--- a/arch/arm/boot/dts/imx28.dtsi ++++ b/arch/arm/boot/dts/imx28.dtsi +@@ -1035,8 +1035,46 @@ + }; + + power: power@80044000 { ++ compatible = "fsl,imx28-power", "syscon"; + reg = <0x80044000 0x2000>; +- status = "disabled"; ++ interrupts = <6>; ++ ++ dcdc: regulator@1 { ++ compatible = "fsl,imx28-dcdc"; ++ regulator-name = "dcdc"; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ reg_vddd: regulator@2 { ++ compatible = "fsl,imx28-vddd"; ++ regulator-name = "vddd"; ++ regulator-min-microvolt = <1350000>; ++ regulator-max-microvolt = <1550000>; ++ vddd-supply = <®_vdda>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ reg_vdda: regulator@3 { ++ compatible = "fsl,imx28-vdda"; ++ regulator-name = "vdda"; ++ regulator-min-microvolt = <1725000>; ++ regulator-max-microvolt = <1950000>; ++ vdda-supply = <®_vddio>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ reg_vddio: regulator@4 { ++ compatible = "fsl,imx28-vddio"; ++ regulator-name = "vddio"; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3550000>; ++ regulator-microvolt-offset = <80000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; + }; + + saif1: saif@80046000 { diff --git a/target/linux/mxs/patches-4.1/120-dt-add-i2c.patch b/target/linux/mxs/patches-4.1/120-dt-add-i2c.patch new file mode 100644 index 0000000000..2aa7250584 --- /dev/null +++ b/target/linux/mxs/patches-4.1/120-dt-add-i2c.patch @@ -0,0 +1,55 @@ +--- a/arch/arm/boot/dts/imx23.dtsi ++++ b/arch/arm/boot/dts/imx23.dtsi +@@ -146,6 +146,39 @@ + fsl,pull-up = ; + }; + ++ i2c0_pins_a: i2c0@0 { ++ reg = <0>; ++ fsl,pinmux-ids = < ++ 0x01e0 /* MX23_PAD_I2C_SCL__I2C_SCL */ ++ 0x01f0 /* MX23_PAD_I2C_SDA__I2C_SDA */ ++ >; ++ fsl,drive-strength = <1>; ++ fsl,voltage = <1>; ++ fsl,pull-up = <1>; ++ }; ++ ++ i2c1_pins_a: i2c1@0 { ++ reg = <0>; ++ fsl,pinmux-ids = < ++ 0x1171 /* MX23_PAD_LCD_ENABLE__I2C_SCL */ ++ 0x1181 /* MX23_PAD_LCD_HSYNC__I2C_SDA */ ++ >; ++ fsl,drive-strength = <1>; ++ fsl,voltage = <1>; ++ fsl,pull-up = <1>; ++ }; ++ ++ i2c2_pins_a: i2c2@0 { ++ reg = <0>; ++ fsl,pinmux-ids = < ++ 0x2031 /* MX23_PAD_SSP1_DATA1__I2C_SCL */ ++ 0x2041 /* MX23_PAD_SSP1_DATA2__I2C_SDA */ ++ >; ++ fsl,drive-strength = <1>; ++ fsl,voltage = <1>; ++ fsl,pull-up = <1>; ++ }; ++ + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < +@@ -444,7 +477,12 @@ + }; + + i2c@80058000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,imx23-i2c"; + reg = <0x80058000 0x2000>; ++ interrupts = <27>; ++ clock-frequency = <100000>; + dmas = <&dma_apbx 3>; + dma-names = "rx-tx"; + status = "disabled";