From: Sujith Manoharan Date: Mon, 21 Feb 2011 02:20:01 +0000 (+0530) Subject: ath9k_htc: Fix TBTT calculation for IBSS mode X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=200be651f77f8407086873520436bf55a4468e26;p=openwrt%2Fstaging%2Fblogic.git ath9k_htc: Fix TBTT calculation for IBSS mode The target beacon transmission time has to be synced with the HW TSF when configuring beacon timers in Adhoc mode. Failing to do this would cause erroneous beacon transmission, for example, on completion of a scan run to check for IBSS merges. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c index e897a56695b2..007b99fc50c8 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c @@ -188,20 +188,31 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv, { struct ath_common *common = ath9k_hw_common(priv->ah); enum ath9k_int imask = 0; - u32 nexttbtt, intval; + u32 nexttbtt, intval, tsftu; __be32 htc_imask = 0; int ret; u8 cmd_rsp; + u64 tsf; intval = bss_conf->beacon_interval & ATH9K_BEACON_PERIOD; nexttbtt = intval; + + /* + * Pull nexttbtt forward to reflect the current TSF. + */ + tsf = ath9k_hw_gettsf64(priv->ah); + tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE; + do { + nexttbtt += intval; + } while (nexttbtt < tsftu); + intval |= ATH9K_BEACON_ENA; if (priv->op_flags & OP_ENABLE_BEACON) imask |= ATH9K_INT_SWBA; - ath_dbg(common, ATH_DBG_BEACON, - "IBSS Beacon config, intval: %d, imask: 0x%x\n", - bss_conf->beacon_interval, imask); + ath_dbg(common, ATH_DBG_CONFIG, + "IBSS Beacon config, intval: %d, nexttbtt: %u, imask: 0x%x\n", + bss_conf->beacon_interval, nexttbtt, imask); WMI_CMD(WMI_DISABLE_INTR_CMDID); ath9k_hw_beaconinit(priv->ah, nexttbtt, intval);