From: Stijn Segers Date: Sat, 23 Mar 2024 21:02:56 +0000 (+0100) Subject: mvebu: 6.6: adjust 32 bit ARM DTS path X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=20024ab7c3df4da2d446e214c7b4a61fc896bdcd;p=openwrt%2Fstaging%2Flinusw.git mvebu: 6.6: adjust 32 bit ARM DTS path As of 6.6, all upstream DTSes are moved to their respective vendor subdir. OpenWrt already followed this practice for ARM64, but not yet for 32 bit ARM (Armada 37x/38x). Signed-off-by: Stijn Segers --- diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts deleted file mode 100644 index 11be6a4028..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts +++ /dev/null @@ -1,376 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Buffalo LinkStation LS220DE - * - * Copyright (C) 2023 Daniel González Cabanelas - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include "mvebu-linkstation-fan.dtsi" -#include -#include -#include -#include - -/ { - model = "Buffalo LinkStation LS220DE"; - compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_boot; - led-failsafe = &led_failsafe; - led-running = &led_power; - led-upgrade = &led_upgrade; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - append-rootblock = "nullparameter="; /* override the bootloader args */ - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256 MB */ - }; - - soc { - ranges = ; - }; - - system_fan: gpio_fan { - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH - &gpio0 14 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - #cooling-cells = <2>; - }; - - thermal-zones { - hdd-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ - - trips { - hdd_alert1: trip1 { - temperature = <34000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert2: trip2 { - temperature = <40000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert3: trip3 { - temperature = <45000>; - hysteresis = <2000>; - type = "passive"; - }; - hdd_hot { - temperature = <50000>; - hysteresis = <2000>; - type = "hot"; - }; - hdd_crit { - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <&hdd_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; - }; - map2 { - trip = <&hdd_alert2>; - cooling-device = <&system_fan 2 2>; - }; - map3 { - trip = <&hdd_alert3>; - cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Switch"; - linux,code = ; - linux,input-type = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - function { - label = "Function Button"; - linux,code = ; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - - indicator_red { - function = LED_FUNCTION_INDICATOR; - color = ; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_power: power_white { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_failsafe: power_red { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - led_upgrade: power_orange { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; - }; - - led_boot: indicator_white { - function = LED_FUNCTION_INDICATOR; - color = ; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - }; - - hdd1_red { - function = LED_FUNCTION_DISK; - color = ; - gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata1"; - function-enumerator = <1>; - }; - - hdd2_red { - function = LED_FUNCTION_DISK; - color = ; - gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata2"; - function-enumerator = <2>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>; - pinctrl-names = "default"; - - sata1_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "HDD1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <2000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - - sata2_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD2"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <4000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */ - <0x3 0x11 0x0000 0x4401>, /* LED polarity */ - <0x3 0x12 0x0000 0x4905>; /* LED timer */ - #thermal-sensor-cells = <0>; - }; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi_kernel"; - reg = <0x00000000 0x02000000>; /* 32 MiB */ - }; - - partition@2000000 { - label = "ubi"; - reg = <0x02000000 0x1df00000>; /* 479 MiB */ - }; - }; - }; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000 0xf0000>; /* 960 KiB*/ - label = "u-boot"; - read-only; - }; - partition@f0000 { - reg = <0xf0000 0x10000>; /* 64 KiB */ - label = "u-boot-env"; - }; - }; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&pinctrl { - pmx_power_hdd2: pmx-power-hdd2 { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_hdd_present: pmx-hdd-present { - marvell,pins = "mpp11", "mpp12"; - marvell,function = "gpio"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp15", "mpp16"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds { - marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds { - marvell,pins = "mpp55", "mpp57", "mpp62"; - marvell,function = "gpio"; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts deleted file mode 100644 index 59400839a7..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Buffalo LinkStation LS421DE - * - * Copyright (C) 2020 Daniel González Cabanelas - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include "mvebu-linkstation-fan.dtsi" -#include -#include -#include - -/ { - model = "Buffalo LinkStation LS421DE"; - compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_boot; - led-failsafe = &led_failsafe; - led-running = &led_power; - led-upgrade = &led_upgrade; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - append-rootblock = "nullparameter="; /* override the bootloader args */ - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ - }; - - soc { - ranges = ; - }; - - system_fan: gpio_fan { - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH - &gpio0 14 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - #cooling-cells = <2>; - }; - - thermal-zones { - hdd-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ - - trips { - hdd_alert1: trip1 { - temperature = <36000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert2: trip2 { - temperature = <44000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert3: trip3 { - temperature = <52000>; - hysteresis = <2000>; - type = "passive"; - }; - hdd_crit: trip4 { - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <&hdd_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; - }; - map2 { - trip = <&hdd_alert2>; - cooling-device = <&system_fan 2 2>; - }; - map3 { - trip = <&hdd_alert3>; - cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; - }; - }; - }; - - ethphy-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <ðphy0>; - - trips { - ethphy_alert1: trip1 { - temperature = <65000>; - hysteresis = <4000>; - type = "passive"; - }; - - ethphy_crit: trip2 { - temperature = <100000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <ðphy_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Switch"; - linux,code = ; - linux,input-type = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - function { - label = "Function Button"; - linux,code = ; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - - system_red { - label = "ls421de:red:system"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - led_power: power_white { - label = "ls421de:white:power"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_failsafe: power_red { - label = "ls421de:red:power"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - led_upgrade: power_orange { - label = "ls421de:orange:power"; - gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; - }; - - led_boot: system_white { - label = "ls421de:white:system"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - }; - - hdd1_red { - label = "ls421de:red:hdd1"; - gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata1"; - }; - - hdd2_red { - label = "ls421de:red:hdd2"; - gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata2"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>; - pinctrl-names = "default"; - - usb_power: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "USB"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; - }; - - sata1_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "HDD1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <2000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - - sata2_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD2"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <4000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - clock-frequency = <100000>; - status = "okay"; - - rs5c372a: rs5c372a@32 { - compatible = "ricoh,rs5c372a"; - reg = <0x32>; - wakeup-source; - }; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */ - reg = <0>; - marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */ - <0x3 0x10 0x0000 0x1991>, /* LED function */ - <0x3 0x11 0x0000 0x4401>, /* LED polarity */ - <0x3 0x12 0x0000 0x4905>; /* LED timer */ - #thermal-sensor-cells = <0>; - }; -}; - -&pciec { - status = "okay"; - pinctrl-0 = <&pmx_pcie>; - pinctrl-names = "default"; - - /* Connected to uPD720202 USB 3.0 Host */ - pcie@1,0 { - status = "okay"; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&rtc { - status = "disabled"; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&sdio { - pinctrl-0 = <&sdio_pins2>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x00000000 0x02000000>; /* 32 MiB */ - }; - - partition@2000000 { - label = "ubi"; - reg = <0x02000000 0x1e000000>; /* 480 MiB */ - }; - }; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000 0xf0000>; /* 960 KiB*/ - label = "u-boot"; - read-only; - }; - partition@f0000 { - reg = <0xf0000 0x10000>; /* 64 KiB */ - label = "u-boot-env"; - }; - }; - }; -}; - -&pinctrl { - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_power_usb: pmx-power-usb { - marvell,pins = "mpp5"; - marvell,function = "gpo"; - }; - - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_power_hdd2: pmx-power-hdd2 { - marvell,pins = "mpp9"; - marvell,function = "gpo"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_hdd_present: pmx-hdd-present { - marvell,pins = "mpp11", "mpp12"; - marvell,function = "gpio"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp15", "mpp16"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds { - marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds { - marvell,pins = "mpp55", "mpp57", "mpp62"; - marvell,function = "gpio"; - }; - - pmx_pcie: pmx-pcie { - marvell,pins = "mpp56", "mpp60"; - marvell,function = "pcie"; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-c200-v2.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-c200-v2.dts deleted file mode 100644 index 0d5ec567ea..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-c200-v2.dts +++ /dev/null @@ -1,424 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Ctera C200-V2 - * - * Copyright (C) 2021 Pawel Dembicki - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include -#include -#include -#include - -/ { - model = "Ctera C200 V2"; - compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_red; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1024 MB */ - }; - - soc { - ranges = ; - }; - - thermal-zones { - ethphy-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <ðphy0>; - - trips { - ethphy_alert1: trip1 { - temperature = <65000>; - hysteresis = <4000>; - type = "passive"; - }; - - ethphy_crit: trip2 { - temperature = <100000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Button"; - linux,code = ; - gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - }; - - reset { - label = "Reset Button"; - linux,code = ; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - }; - - usb1 { - label = "USB1 Button"; - linux,code = ; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - }; - - usb2 { - label = "USB2 Button"; - linux,code = ; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_poweroff>; - pinctrl-names = "default"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - pinctrl-names = "default"; - - led-0 { - function = LED_FUNCTION_USB; - function-enumerator = <2>; - color = ; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - led-1 { - function = LED_FUNCTION_USB; - function-enumerator = <2>; - color = ; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb1_port 1>, <&usb2_port 1>; - }; - - led-2 { - function = LED_FUNCTION_USB; - function-enumerator = <1>; - color = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - led-3 { - function = LED_FUNCTION_USB; - function-enumerator = <1>; - color = ; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb1_port 2>, <&usb2_port 2>; - }; - - led-4 { - function = LED_FUNCTION_DISK; - function-enumerator = <2>; - color = ; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata2"; - }; - - led-5 { - function = LED_FUNCTION_DISK; - function-enumerator = <1>; - color = ; - gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; - }; - - led-6 { - function = LED_FUNCTION_DISK; - function-enumerator = <2>; - color = ; - gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - }; - - led-7 { - function = LED_FUNCTION_INDICATOR; - color = ; - gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; - }; - - led-8 { - function = LED_FUNCTION_DISK_ERR; - color = ; - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - }; - - led-9 { - function = LED_FUNCTION_DISK_ERR; - color = ; - gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; - }; - - led_status_red: led-10 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; - }; - - led-11 { - function = LED_FUNCTION_DISK; - function-enumerator = <1>; - color = ; - gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata1"; - }; - - led_status_green: led-12 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - clock-frequency = <100000>; - status = "okay"; - - hwmon@2a { - compatible = "nuvoton,nct7802"; - reg = <0x2a>; - }; - - rtc@30 { - compatible = "sii,s35390a"; - reg = <0x30>; - }; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - #thermal-sensor-cells = <0>; - }; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x200000>; - read-only; - }; - - partition@200000 { - label = "certificate"; - reg = <0x0200000 0x100000>; - read-only; - }; - - partition@300000 { - label = "preset_cfg"; - reg = <0x0300000 0x100000>; - read-only; - }; - - partition@400000 { - label = "dev_params"; - reg = <0x0400000 0x100000>; - read-only; - }; - partition@500000 { - label = "active_bank"; - reg = <0x0500000 0x0100000>; - }; - - partition@600000 { - label = "magic"; - reg = <0x0600000 0x0100000>; - read-only; - }; - - partition@700000 { - label = "bank1"; - reg = <0x0700000 0x2800000>; - }; - - partition@2f00000 { - label = "bank2"; - reg = <0x2f00000 0x2800000>; - }; - - /* 0x5700000-0x5a00000 undefined in vendor firmware */ - - partition@5a00000 { - label = "reserved"; - reg = <0x5a00000 0x2000000>; - }; - - partition@7a00000 { - label = "ubi"; - reg = <0x7a00000 0x8600000>; - }; - }; - }; -}; - -&pciec { - status = "okay"; - - pcie@1,0 { - pinctrl-0 = <&pmx_pcie>; - pinctrl-names = "default"; - status = "okay"; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - - /* -[0000:00]---01.0-[01]----00.0 */ - /* usbport trigger won't work */ - bridge@0,1 { - compatible = "pci11ab,6710"; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - - usb@1,0 { - /* Renesas uPD720202 */ - compatible = "pci1912,0015"; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - - usb1_port: port@1 { - reg = <1>; - #trigger-source-cells = <1>; - }; - - usb2_port: port@2 { - reg = <2>; - #trigger-source-cells = <1>; - }; - }; - }; - }; -}; - -&pinctrl { - pmx_poweroff: pmx-poweroff { - marvell,pins = "mpp7"; - marvell,function = "gpo"; - }; - - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds1 { - marvell,pins = "mpp47"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds2 { - marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51", - "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58"; - marvell,function = "gpio"; - }; - - pmx_pcie: pmx-pcie { - marvell,pins = "mpp59"; - marvell,function = "gpio"; - }; - - /* this gpio is connected to the pin of buzzer - * leave it as is due lack of proper driver - */ - pmx_buzzer: pmx-buzzer { - marvell,pins = "mpp63"; - marvell,function = "gpio"; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&rtc { - status = "disabled"; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-380-iij-sa-w2.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-380-iij-sa-w2.dts deleted file mode 100644 index 335a2ecf96..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-380-iij-sa-w2.dts +++ /dev/null @@ -1,377 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include -#include -#include -#include "armada-380.dtsi" - -/ { - model = "IIJ SA-W2"; - compatible = "iij,sa-w2", "marvell,armada380"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_red; - led-running = &led_power_green; - led-upgrade = &led_power_green; - label-mac-device = &ge0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256MB */ - }; - - soc { - ranges = ; - - pcie { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - - pcie@3,0 { - status = "okay"; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_keys_pins>; - - button-init { - label = "init"; - linux,code = ; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds_pins>; - - led-0 { - gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "phy0tpt"; - }; - - led-1 { - gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - color = ; - }; - - led-2 { - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-3 { - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-4 { - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - color = ; - }; - - led-5 { - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - color = ; - }; - - led-6 { - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "phy1tpt"; - }; - - led-7 { - gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - color = ; - }; - - led_power_green: led-8 { - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - color = ; - }; - - led_power_red: led-9 { - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - color = ; - }; - - led-10 { - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port2>; - }; - - led-11 { - gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port1>; - }; - }; - - regulator-vbus-usb0 { - compatible = "regulator-fixed"; - regulator-name = "vbus-usb0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - regulator-vbus-usb1 { - compatible = "regulator-fixed"; - regulator-name = "vbus-usb1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&pinctrl { - pmx_usb_pins: usb-pins { - marvell,pins = "mpp2", /* smsc usb2514b reset */ - "mpp48", "mpp49", /* port over current */ - "mpp52", "mpp53"; /* port vbus */ - marvell,function = "gpio"; - }; - - pmx_keys_pins: keys-pins { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; - - pmx_leds_pins: leds-pins { - marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35", - "mpp36", "mpp44", "mpp45", "mpp46", "mpp47", - "mpp54", "mpp55"; - marvell,function = "gpio"; - }; -}; - -&gpio0 { - usb-hub-reset { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -&usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&pmx_usb_pins>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - /* SMSC USB2514B on PCB */ - hub@1 { - compatible = "usb424,2514"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - hub_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð1 { - pinctrl-names = "default"; - pinctrl-0 = <&ge1_rgmii_pins>; - status = "okay"; - - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - - nvmem-cells = <&macaddr_bdinfo_6 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - status = "okay"; - - /* Marvell 88E6172 */ - switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0x0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio1>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "ge1_0"; - }; - - port@1 { - reg = <1>; - label = "ge1_1"; - }; - - port@2 { - reg = <2>; - label = "ge1_2"; - }; - - port@3 { - reg = <3>; - label = "ge1_3"; - }; - - ge0: port@4 { - reg = <4>; - label = "ge0"; - nvmem-cells = <&macaddr_bdinfo_6 0>; - nvmem-cell-names = "mac-address"; - }; - - /* - * eth0 is connected to port5 for WAN connection - * on port4 ("GE0") - */ - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <ð1>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -&rtc { - status = "disabled"; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x100000>; - label = "bootloader"; - read-only; - }; - - partition@100000 { - reg = <0x100000 0x10000>; - label = "bootloader-env"; - read-only; - }; - - partition@110000 { - reg = <0x110000 0xf0000>; - label = "board_info"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_bdinfo_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@200000 { - compatible = "iij,seil-firmware"; - reg = <0x200000 0xf00000>; - label = "firmware"; - iij,bootdev-name = "flash"; - iij,seil-id = <0x5345494c 0x32303135>; - }; - - partition@1100000 { - compatible = "iij,seil-firmware"; - reg = <0x1100000 0xf00000>; - label = "rescue"; - iij,bootdev-name = "rescue"; - iij,seil-id = <0x5345494c 0x32303135>; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts deleted file mode 100644 index c0900d7126..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-x0e.dtsi" - -/ { - model = "Fortinet FortiGate 30E"; - compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380"; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1GB */ - }; -}; - -&gpio_leds { - led-14 { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "mv88e6xxx-1:00:100Mbps"; - }; - - led-15 { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "mv88e6xxx-1:00:1Gbps"; - }; -}; - -&pinctrl { - pmx_switch_pins: switch-pins { - marvell,pins = "mpp19"; - marvell,function = "gpio"; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>; - - /* Marvell 88E6176 */ - switch@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2>; - reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "wan"; - nvmem-cells = <&macaddr_bdinfo_d880 1>; - nvmem-cell-names = "mac-address"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - nvmem-cells = <&macaddr_bdinfo_d880 5>; - nvmem-cell-names = "mac-address"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - nvmem-cells = <&macaddr_bdinfo_d880 4>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - nvmem-cells = <&macaddr_bdinfo_d880 3>; - nvmem-cell-names = "mac-address"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - nvmem-cells = <&macaddr_bdinfo_d880 2>; - nvmem-cell-names = "mac-address"; - }; - - port@6 { - reg = <6>; - ethernet = <ð0>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts deleted file mode 100644 index d202d71c7f..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts +++ /dev/null @@ -1,167 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-x0e.dtsi" - -/ { - model = "Fortinet FortiGate 50E"; - compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380"; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2GB */ - }; -}; - -&gpio_leds { - led-14 { - gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "f1072004.mdio-mii:00:1Gbps"; - }; - - led-15 { - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "f1072004.mdio-mii:01:1Gbps"; - }; - - led-16 { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "mv88e6xxx-1:00:100Mbps"; - }; - - led-17 { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "mv88e6xxx-1:00:1Gbps"; - }; -}; - -&pinctrl { - pmx_phy_switch_pins: phy-switch-pins { - marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41"; - marvell,function = "gpio"; - }; -}; - -ð1 { - status = "okay"; - - phy-handle = <ðphy0>; - phy-connection-type = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - nvmem-cells = <&macaddr_bdinfo_d880 1>; - nvmem-cell-names = "mac-address"; -}; - -ð2 { - status = "okay"; - - phy-handle = <ðphy1>; - phy-connection-type = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <3>; - nvmem-cells = <&macaddr_bdinfo_d880 2>; - nvmem-cell-names = "mac-address"; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>; - - /* Marvell 88E1512 */ - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <0>; - interrupt-parent = <&gpio0>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - /* - * LINK/ACT (Green): LED[0], Active Low - * SPEED 100M (Amber): LED[1], Active High - */ - marvell,reg-init = <3 16 0 0x71>, - <3 17 0 0x4>; - }; - - /* Marvell 88E1512 */ - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <1>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - /* - * LINK/ACT (Green): LED[0], Active Low - * SPEED 100M (Amber): LED[1], Active High - */ - marvell,reg-init = <3 16 0 0x71>, - <3 17 0 0x4>; - }; - - /* Marvell 88E6176 */ - switch@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2>; - reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan5"; - nvmem-cells = <&macaddr_bdinfo_d880 7>; - nvmem-cell-names = "mac-address"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - nvmem-cells = <&macaddr_bdinfo_d880 6>; - nvmem-cell-names = "mac-address"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - nvmem-cells = <&macaddr_bdinfo_d880 5>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - nvmem-cells = <&macaddr_bdinfo_d880 4>; - nvmem-cell-names = "mac-address"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - nvmem-cells = <&macaddr_bdinfo_d880 3>; - nvmem-cell-names = "mac-address"; - }; - - port@6 { - reg = <6>; - ethernet = <ð0>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi deleted file mode 100644 index 8cc2d6bc4a..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi +++ /dev/null @@ -1,328 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include -#include -#include -#include "armada-385.dtsi" - -/ { - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_green; - label-mac-device = ð0; - }; - - chosen { - stdout-path = "serial0:9600n8"; - }; - - soc { - ranges = ; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_gpio_keys_pins>; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_gpio_leds_pins>; - - led-0 { - gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_ALARM; - }; - - led-1 { - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - color = ; - }; - - led_status_green: led-2 { - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-3 { - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - color = ; - }; - - led-4 { - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_ALARM; - }; - - led_status_red: led-5 { - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-6 { - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "mv88e6xxx-1:01:1Gbps"; - }; - - led-7 { - gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "mv88e6xxx-1:01:100Mbps"; - }; - - led-8 { - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "mv88e6xxx-1:02:100Mbps"; - }; - - led-9 { - gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "mv88e6xxx-1:02:1Gbps"; - }; - - led-10 { - gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "mv88e6xxx-1:04:1Gbps"; - }; - - led-11 { - gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "mv88e6xxx-1:04:100Mbps"; - }; - - led-12 { - gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "mv88e6xxx-1:03:1Gbps"; - }; - - led-13 { - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - color = ; - linux,default-trigger = "mv88e6xxx-1:03:100Mbps"; - }; - }; - - reg_usb_vbus: regulator-usb-vbus { - compatible = "fixed-regulator"; - regulator-name = "usb-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; - regulator-always-on; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - gpio2: gpio@24 { - compatible = "nxp,pca9555"; - reg = <0x24>; - gpio-controller; - #gpio-cells = <0x2>; - }; - - hwmon@28 { - compatible = "nuvoton,nct7802"; - reg = <0x28>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&pinctrl { - pmx_gpio_leds_pins: gpio-leds-pins { - marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35", - "mpp45", "mpp47"; - marvell,function = "gpio"; - }; - - pmx_usb_pins: usb-pins { - marvell,pins = "mpp53"; - marvell,function = "gpio"; - }; - - pmx_gpio_keys_pins: gpio-keys-pins { - marvell,pins = "mpp54"; - marvell,function = "gpio"; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&ge0_rgmii_pins>; - status = "okay"; - - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - nvmem-cells = <&macaddr_bdinfo_d880 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&usb3_0 { - pinctrl-names = "default"; - pinctrl-0 = <&pmx_usb_pins>; - status = "okay"; - - vbus-supply = <®_usb_vbus>; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x1c0000>; - label = "u-boot"; - read-only; - }; - - partition@1c0000 { - reg = <0x1c0000 0x10000>; - label = "firmware-info"; - - /* - * 0x10 - 0x2f : image name (image1) - * 0x30 - 0x4f : image name (image2) - * 0x170 (1byte): active image (0x0/0x1) - * 0x184 - 0x185: kernel block count (image1) - * 0x18c - 0x18d: rootfs block count (image1) - * 0x194 - 0x195: kernel block count (image2) - * 0x19c - 0x19d: rootfs block count (image2) - * 0x1be (1byte): bit7 -> active flag (image1)? - * 0x1ce (1byte): bit7 -> active flag (image2)? - * - * Note: block size --> 0x200 (512 bytes) - */ - }; - - partition@1d0000 { - reg = <0x1d0000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@1e0000 { - reg = <0x1e0000 0x10000>; - label = "u-boot-env"; - read-only; - }; - - partition@1f0000 { - reg = <0x1f0000 0x10000>; - label = "board-info"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_bdinfo_d880: macaddr@d880 { - compatible = "mac-base"; - reg = <0xd880 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@200000 { - reg = <0x200000 0x600000>; - label = "kernel"; - }; - - partition@800000 { - reg = <0x800000 0x1800000>; - label = "rootfs"; - }; - - partition@2000000 { - reg = <0x2000000 0x600000>; - label = "kn2"; - read-only; - }; - - partition@2600000 { - reg = <0x2600000 0x1800000>; - label = "rfs2"; - read-only; - }; - - partition@3e00000 { - reg = <0x3e00000 0x1200000>; - label = "part1"; - read-only; - }; - - partition@5000000 { - reg = <0x5000000 0x1200000>; - label = "part2"; - read-only; - }; - - partition@6200000 { - reg = <0x6200000 0x1e00000>; - label = "config"; - read-only; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-linksys-venom.dts deleted file mode 100644 index a2ca3158cf..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-linksys-venom.dts +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Device Tree file for the Linksys WRT32X (Venom) - * - * Copyright (C) 2017 Imre Kaloz - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include -#include -#include "armada-385-linksys.dtsi" - -/ { - model = "Linksys WRT32X"; - compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385", - "marvell,armada385", "marvell,armada380"; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - append-rootblock = "root=/dev/mtdblock"; - }; -}; - -&expander0 { - wan_amber@0 { - label = "venom:amber:wan"; - reg = <0x0>; - }; - - wan_blue@1 { - label = "venom:blue:wan"; - reg = <0x1>; - }; - - usb2@5 { - label = "venom:blue:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "venom:blue:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "venom:blue:usb3_2"; - reg = <0x7>; - }; - - wps_blue@8 { - label = "venom:blue:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "venom:amber:wps"; - reg = <0x9>; - }; -}; - -&gpio_leds { - power { - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - label = "venom:blue:power"; - }; - - sata { - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - label = "venom:blue:sata"; - }; - - wlan_2g { - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - label = "venom:blue:wlan_2g"; - }; - - wlan_5g { - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - label = "venom:blue:wlan_5g"; - }; -}; - -&gpio_leds_pins { - marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; -}; - -&nand { - /* Spansion S34ML02G2 256MiB, OEM Layout */ - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MB */ - read-only; - }; - - partition@200000 { - label = "u_env"; - reg = <0x200000 0x20000>; /* 128KB */ - }; - - partition@220000 { - label = "s_env"; - reg = <0x220000 0x40000>; /* 256KB */ - }; - - partition@180000 { - label = "unused_area"; - reg = <0x260000 0x5c0000>; /* 5.75MB */ - }; - - partition@7e0000 { - label = "devinfo"; - reg = <0x7e0000 0x40000>; /* 256KB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@900000 { - label = "kernel1"; - reg = <0x900000 0x7b00000>; /* 123MB */ - }; - - partition@f00000 { - label = "rootfs1"; - reg = <0xf00000 0x7500000>; /* 117MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@8400000 { - label = "kernel2"; - reg = <0x8400000 0x7b00000>; /* 123MB */ - }; - - partition@8a00000 { - label = "rootfs2"; - reg = <0x8a00000 0x7500000>; /* 117MB */ - }; - - /* last MB is for the BBT, not writable */ - partition@ff00000 { - label = "BBT"; - reg = <0xff00000 0x100000>; - }; - }; -}; - - -&pcie1 { - mwlwifi { - marvell,chainmask = <4 4>; - }; -}; - -&pcie2 { - mwlwifi { - marvell,chainmask = <4 4>; - }; -}; - -&sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci_pins>; - no-1-8-v; - non-removable; - wp-inverted; - bus-width = <8>; - status = "okay"; -}; - -&usb3_1_vbus { - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; -}; - -&usb3_1_vbus_pins { - marvell,pins = "mpp44"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-nas1dual.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-nas1dual.dts deleted file mode 100644 index f1fd72a93c..0000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-nas1dual.dts +++ /dev/null @@ -1,322 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR MIT) -/* - * Device Tree file for ipTIME NAS1dual - * - * Copyright (C) 2020 Sungbo Eo - * - * Based on armada-385-linksys.dtsi - * Copyright (C) 2015 Imre Kaloz - */ - -/dts-v1/; - -#include -#include -#include -#include "armada-385.dtsi" - -/ { - model = "ipTIME NAS1dual"; - compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380"; - - aliases { - led-boot = &led_ready; - led-failsafe = &led_ready; - led-running = &led_ready; - led-upgrade = &led_ready; - label-mac-device = ð0; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2GB */ - }; - - soc { - ranges = ; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - - power { - label = "Power Button"; - linux,input-type = ; - linux,code = ; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "Reset Button"; - linux,code = ; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - - copy { - label = "USB Copy Button"; - linux,code = ; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_leds_pins>; - - led_ready: ready { - label = "blue:ready"; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - }; - - hdd { - label = "blue:hdd"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - }; - - usb { - function = LED_FUNCTION_USB; - color = ; - gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb3_0_port1 &usb3_0_port2>; - linux,default-trigger = "usbport"; - }; - }; - - gpio-fan { - compatible = "gpio-fan"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_fan_pins>; - gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>, - <&gpio1 18 GPIO_ACTIVE_HIGH>; - /* We don't know the exact rpm, just use dummy values here. */ - gpio-fan,speed-map = <0 0>, <1 1>, <2 2>; - #cooling-cells = <2>; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&pca9536 1 GPIO_ACTIVE_LOW>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&sata_power_pins>; - - reg_sata_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "sata-power"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; - regulator-always-on; - }; - }; -}; - -&ahci0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - sata-port@0 { - reg = <0>; - target-supply = <®_sata_power>; - #thermal-sensor-cells = <0>; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&ge0_rgmii_pins>; - status = "okay"; - phy-handle = <ðphy1>; - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - nvmem-cells = <&macaddr_uboot_fffa8>; - nvmem-cell-names = "mac-address"; -}; - -ð1 { - pinctrl-names = "default"; - pinctrl-0 = <&ge1_rgmii_pins>; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - nvmem-cells = <&macaddr_uboot_fffa8>; - nvmem-cell-names = "mac-address"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - pca9536: gpio@41 { - compatible = "nxp,pca9536"; - reg = <0x41>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "power-led", "power-board"; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - - /* LED1: On - Link, Blink - Activity, Off - No Link */ - - ethphy0: ethernet-phy@0 { - reg = <0>; - marvell,reg-init = <3 16 0 0x1017>; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 16 0 0x1017>; - }; -}; - -&pinctrl { - gpio_keys_pins: gpio-keys-pins { - marvell,pins = "mpp24", "mpp26", "mpp48"; - marvell,function = "gpio"; - }; - - gpio_leds_pins: gpio-leds-pins { - marvell,pins = "mpp18", "mpp20", "mpp51"; - marvell,function = "gpio"; - }; - - gpio_fan_pins: gpio-fan-pins { - marvell,pins = "mpp25", "mpp50"; - marvell,function = "gpio"; - }; - - sata_power_pins: sata-power-pins { - marvell,pins = "mpp52"; - marvell,function = "gpio"; - }; - - uart1_pins_alt: uart-pins-1-alt { - marvell,pins = "mpp45", "mpp46"; - marvell,function = "ua1"; - }; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000000 0x00100000>; - label = "u-boot"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_uboot_fffa8: macaddr@fffa8 { - reg = <0xfffa8 0x6>; - }; - }; - }; - - partition@100000 { - reg = <0x00100000 0x03ec0000>; - label = "firmware"; - - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000000 0x00600000>; - label = "kernel"; - }; - - partition@600000 { - reg = <0x00600000 0x038c0000>; - label = "rootfs"; - }; - }; - - partition@3fc0000 { - reg = <0x03fc0000 0x00040000>; - label = "config"; - read-only; - }; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_alt>; - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - usb3_0_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_0_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts new file mode 100644 index 0000000000..11be6a4028 --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Device Tree file for Buffalo LinkStation LS220DE + * + * Copyright (C) 2023 Daniel González Cabanelas + */ + +/dts-v1/; + +#include "armada-370.dtsi" +#include "mvebu-linkstation-fan.dtsi" +#include +#include +#include +#include + +/ { + model = "Buffalo LinkStation LS220DE"; + compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp"; + + aliases { + led-boot = &led_boot; + led-failsafe = &led_failsafe; + led-running = &led_power; + led-upgrade = &led_upgrade; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + append-rootblock = "nullparameter="; /* override the bootloader args */ + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256 MB */ + }; + + soc { + ranges = ; + }; + + system_fan: gpio_fan { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH + &gpio0 14 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + #cooling-cells = <2>; + }; + + thermal-zones { + hdd-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ + + trips { + hdd_alert1: trip1 { + temperature = <34000>; + hysteresis = <2000>; + type = "active"; + }; + hdd_alert2: trip2 { + temperature = <40000>; + hysteresis = <2000>; + type = "active"; + }; + hdd_alert3: trip3 { + temperature = <45000>; + hysteresis = <2000>; + type = "passive"; + }; + hdd_hot { + temperature = <50000>; + hysteresis = <2000>; + type = "hot"; + }; + hdd_crit { + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <&hdd_alert1>; + cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; + }; + map2 { + trip = <&hdd_alert2>; + cooling-device = <&system_fan 2 2>; + }; + map3 { + trip = <&hdd_alert3>; + cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + + power { + label = "Power Switch"; + linux,code = ; + linux,input-type = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + function { + label = "Function Button"; + linux,code = ; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_leds1 &pmx_leds2>; + + indicator_red { + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + + led_power: power_white { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_failsafe: power_red { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + led_upgrade: power_orange { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; + + led_boot: indicator_white { + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + }; + + hdd1_red { + function = LED_FUNCTION_DISK; + color = ; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata1"; + function-enumerator = <1>; + }; + + hdd2_red { + function = LED_FUNCTION_DISK; + color = ; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata2"; + function-enumerator = <2>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>; + pinctrl-names = "default"; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "HDD1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + sata2_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&coherencyfab { + broken-idle; +}; + +ð1 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */ + <0x3 0x11 0x0000 0x4401>, /* LED polarity */ + <0x3 0x12 0x0000 0x4905>; /* LED timer */ + #thermal-sensor-cells = <0>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi_kernel"; + reg = <0x00000000 0x02000000>; /* 32 MiB */ + }; + + partition@2000000 { + label = "ubi"; + reg = <0x02000000 0x1df00000>; /* 479 MiB */ + }; + }; + }; +}; + +&sata { + nr-ports = <2>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + hdd0_temp: sata-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; + + hdd1_temp: sata-port@1 { + reg = <1>; + #thermal-sensor-cells = <0>; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000 0xf0000>; /* 960 KiB*/ + label = "u-boot"; + read-only; + }; + partition@f0000 { + reg = <0xf0000 0x10000>; /* 64 KiB */ + label = "u-boot-env"; + }; + }; + }; +}; + +&pmsu { + pinctrl-0 = <&pmx_power_cpu>; + pinctrl-names = "default"; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&pinctrl { + pmx_power_hdd2: pmx-power-hdd2 { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_power_cpu: pmx-power-cpu { + marvell,pins = "mpp4"; + marvell,function = "vdd"; + }; + + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + + pmx_hdd_present: pmx-hdd-present { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp15", "mpp16"; + marvell,function = "gpio"; + }; + + pmx_leds1: pmx-leds { + marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; + marvell,function = "gpo"; + }; + + pmx_leds2: pmx-leds { + marvell,pins = "mpp55", "mpp57", "mpp62"; + marvell,function = "gpio"; + }; +}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts new file mode 100644 index 0000000000..59400839a7 --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Device Tree file for Buffalo LinkStation LS421DE + * + * Copyright (C) 2020 Daniel González Cabanelas + */ + +/dts-v1/; + +#include "armada-370.dtsi" +#include "mvebu-linkstation-fan.dtsi" +#include +#include +#include + +/ { + model = "Buffalo LinkStation LS421DE"; + compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp"; + + aliases { + led-boot = &led_boot; + led-failsafe = &led_failsafe; + led-running = &led_power; + led-upgrade = &led_upgrade; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + append-rootblock = "nullparameter="; /* override the bootloader args */ + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = ; + }; + + system_fan: gpio_fan { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH + &gpio0 14 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + #cooling-cells = <2>; + }; + + thermal-zones { + hdd-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ + + trips { + hdd_alert1: trip1 { + temperature = <36000>; + hysteresis = <2000>; + type = "active"; + }; + hdd_alert2: trip2 { + temperature = <44000>; + hysteresis = <2000>; + type = "active"; + }; + hdd_alert3: trip3 { + temperature = <52000>; + hysteresis = <2000>; + type = "passive"; + }; + hdd_crit: trip4 { + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <&hdd_alert1>; + cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; + }; + map2 { + trip = <&hdd_alert2>; + cooling-device = <&system_fan 2 2>; + }; + map3 { + trip = <&hdd_alert3>; + cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; + }; + }; + }; + + ethphy-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <ðphy0>; + + trips { + ethphy_alert1: trip1 { + temperature = <65000>; + hysteresis = <4000>; + type = "passive"; + }; + + ethphy_crit: trip2 { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <ðphy_alert1>; + cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + + power { + label = "Power Switch"; + linux,code = ; + linux,input-type = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + function { + label = "Function Button"; + linux,code = ; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_leds1 &pmx_leds2>; + + system_red { + label = "ls421de:red:system"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + led_power: power_white { + label = "ls421de:white:power"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_failsafe: power_red { + label = "ls421de:red:power"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + led_upgrade: power_orange { + label = "ls421de:orange:power"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; + + led_boot: system_white { + label = "ls421de:white:system"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + }; + + hdd1_red { + label = "ls421de:red:hdd1"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata1"; + }; + + hdd2_red { + label = "ls421de:red:hdd2"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata2"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>; + pinctrl-names = "default"; + + usb_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "HDD1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + sata2_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&coherencyfab { + broken-idle; +}; + +ð1 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + wakeup-source; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */ + reg = <0>; + marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */ + <0x3 0x10 0x0000 0x1991>, /* LED function */ + <0x3 0x11 0x0000 0x4401>, /* LED polarity */ + <0x3 0x12 0x0000 0x4905>; /* LED timer */ + #thermal-sensor-cells = <0>; + }; +}; + +&pciec { + status = "okay"; + pinctrl-0 = <&pmx_pcie>; + pinctrl-names = "default"; + + /* Connected to uPD720202 USB 3.0 Host */ + pcie@1,0 { + status = "okay"; + }; +}; + +&pmsu { + pinctrl-0 = <&pmx_power_cpu>; + pinctrl-names = "default"; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + nr-ports = <2>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + hdd0_temp: sata-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; + + hdd1_temp: sata-port@1 { + reg = <1>; + #thermal-sensor-cells = <0>; + }; +}; + +&sdio { + pinctrl-0 = <&sdio_pins2>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x02000000>; /* 32 MiB */ + }; + + partition@2000000 { + label = "ubi"; + reg = <0x02000000 0x1e000000>; /* 480 MiB */ + }; + }; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000 0xf0000>; /* 960 KiB*/ + label = "u-boot"; + read-only; + }; + partition@f0000 { + reg = <0xf0000 0x10000>; /* 64 KiB */ + label = "u-boot-env"; + }; + }; + }; +}; + +&pinctrl { + pmx_power_cpu: pmx-power-cpu { + marvell,pins = "mpp4"; + marvell,function = "vdd"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp5"; + marvell,function = "gpo"; + }; + + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + pmx_power_hdd2: pmx-power-hdd2 { + marvell,pins = "mpp9"; + marvell,function = "gpo"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + + pmx_hdd_present: pmx-hdd-present { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp15", "mpp16"; + marvell,function = "gpio"; + }; + + pmx_leds1: pmx-leds { + marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; + marvell,function = "gpo"; + }; + + pmx_leds2: pmx-leds { + marvell,pins = "mpp55", "mpp57", "mpp62"; + marvell,function = "gpio"; + }; + + pmx_pcie: pmx-pcie { + marvell,pins = "mpp56", "mpp60"; + marvell,function = "pcie"; + }; +}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts new file mode 100644 index 0000000000..0d5ec567ea --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Device Tree file for Ctera C200-V2 + * + * Copyright (C) 2021 Pawel Dembicki + */ + +/dts-v1/; + +#include "armada-370.dtsi" +#include +#include +#include +#include + +/ { + model = "Ctera C200 V2"; + compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_red; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1024 MB */ + }; + + soc { + ranges = ; + }; + + thermal-zones { + ethphy-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <ðphy0>; + + trips { + ethphy_alert1: trip1 { + temperature = <65000>; + hysteresis = <4000>; + type = "passive"; + }; + + ethphy_crit: trip2 { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + + power { + label = "Power Button"; + linux,code = ; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + usb1 { + label = "USB1 Button"; + linux,code = ; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "USB2 Button"; + linux,code = ; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds1 &pmx_leds2>; + pinctrl-names = "default"; + + led-0 { + function = LED_FUNCTION_USB; + function-enumerator = <2>; + color = ; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + led-1 { + function = LED_FUNCTION_USB; + function-enumerator = <2>; + color = ; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&usb1_port 1>, <&usb2_port 1>; + }; + + led-2 { + function = LED_FUNCTION_USB; + function-enumerator = <1>; + color = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-3 { + function = LED_FUNCTION_USB; + function-enumerator = <1>; + color = ; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&usb1_port 2>, <&usb2_port 2>; + }; + + led-4 { + function = LED_FUNCTION_DISK; + function-enumerator = <2>; + color = ; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata2"; + }; + + led-5 { + function = LED_FUNCTION_DISK; + function-enumerator = <1>; + color = ; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + }; + + led-6 { + function = LED_FUNCTION_DISK; + function-enumerator = <2>; + color = ; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + }; + + led-7 { + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + }; + + led-8 { + function = LED_FUNCTION_DISK_ERR; + color = ; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + }; + + led-9 { + function = LED_FUNCTION_DISK_ERR; + color = ; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + }; + + led_status_red: led-10 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + }; + + led-11 { + function = LED_FUNCTION_DISK; + function-enumerator = <1>; + color = ; + gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata1"; + }; + + led_status_green: led-12 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&coherencyfab { + broken-idle; +}; + +ð1 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + status = "okay"; + + hwmon@2a { + compatible = "nuvoton,nct7802"; + reg = <0x2a>; + }; + + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + #thermal-sensor-cells = <0>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x200000>; + read-only; + }; + + partition@200000 { + label = "certificate"; + reg = <0x0200000 0x100000>; + read-only; + }; + + partition@300000 { + label = "preset_cfg"; + reg = <0x0300000 0x100000>; + read-only; + }; + + partition@400000 { + label = "dev_params"; + reg = <0x0400000 0x100000>; + read-only; + }; + partition@500000 { + label = "active_bank"; + reg = <0x0500000 0x0100000>; + }; + + partition@600000 { + label = "magic"; + reg = <0x0600000 0x0100000>; + read-only; + }; + + partition@700000 { + label = "bank1"; + reg = <0x0700000 0x2800000>; + }; + + partition@2f00000 { + label = "bank2"; + reg = <0x2f00000 0x2800000>; + }; + + /* 0x5700000-0x5a00000 undefined in vendor firmware */ + + partition@5a00000 { + label = "reserved"; + reg = <0x5a00000 0x2000000>; + }; + + partition@7a00000 { + label = "ubi"; + reg = <0x7a00000 0x8600000>; + }; + }; + }; +}; + +&pciec { + status = "okay"; + + pcie@1,0 { + pinctrl-0 = <&pmx_pcie>; + pinctrl-names = "default"; + status = "okay"; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + + /* -[0000:00]---01.0-[01]----00.0 */ + /* usbport trigger won't work */ + bridge@0,1 { + compatible = "pci11ab,6710"; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + + usb@1,0 { + /* Renesas uPD720202 */ + compatible = "pci1912,0015"; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + + usb1_port: port@1 { + reg = <1>; + #trigger-source-cells = <1>; + }; + + usb2_port: port@2 { + reg = <2>; + #trigger-source-cells = <1>; + }; + }; + }; + }; +}; + +&pinctrl { + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_power_cpu: pmx-power-cpu { + marvell,pins = "mpp4"; + marvell,function = "vdd"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32"; + marvell,function = "gpio"; + }; + + pmx_leds1: pmx-leds1 { + marvell,pins = "mpp47"; + marvell,function = "gpo"; + }; + + pmx_leds2: pmx-leds2 { + marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51", + "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58"; + marvell,function = "gpio"; + }; + + pmx_pcie: pmx-pcie { + marvell,pins = "mpp59"; + marvell,function = "gpio"; + }; + + /* this gpio is connected to the pin of buzzer + * leave it as is due lack of proper driver + */ + pmx_buzzer: pmx-buzzer { + marvell,pins = "mpp63"; + marvell,function = "gpio"; + }; +}; + +&pmsu { + pinctrl-0 = <&pmx_power_cpu>; + pinctrl-names = "default"; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + nr-ports = <2>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + hdd0_temp: sata-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; + + hdd1_temp: sata-port@1 { + reg = <1>; + #thermal-sensor-cells = <0>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts new file mode 100644 index 0000000000..335a2ecf96 --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include +#include +#include +#include "armada-380.dtsi" + +/ { + model = "IIJ SA-W2"; + compatible = "iij,sa-w2", "marvell,armada380"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_green; + label-mac-device = &ge0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256MB */ + }; + + soc { + ranges = ; + + pcie { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + + pcie@3,0 { + status = "okay"; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_keys_pins>; + + button-init { + label = "init"; + linux,code = ; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_leds_pins>; + + led-0 { + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + color = ; + linux,default-trigger = "phy0tpt"; + }; + + led-1 { + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + color = ; + }; + + led-2 { + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-3 { + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-4 { + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + color = ; + }; + + led-5 { + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + color = ; + }; + + led-6 { + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + color = ; + linux,default-trigger = "phy1tpt"; + }; + + led-7 { + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + color = ; + }; + + led_power_green: led-8 { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + color = ; + }; + + led_power_red: led-9 { + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + color = ; + }; + + led-10 { + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port2>; + }; + + led-11 { + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port1>; + }; + }; + + regulator-vbus-usb0 { + compatible = "regulator-fixed"; + regulator-name = "vbus-usb0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + regulator-vbus-usb1 { + compatible = "regulator-fixed"; + regulator-name = "vbus-usb1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&pinctrl { + pmx_usb_pins: usb-pins { + marvell,pins = "mpp2", /* smsc usb2514b reset */ + "mpp48", "mpp49", /* port over current */ + "mpp52", "mpp53"; /* port vbus */ + marvell,function = "gpio"; + }; + + pmx_keys_pins: keys-pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_leds_pins: leds-pins { + marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35", + "mpp36", "mpp44", "mpp45", "mpp46", "mpp47", + "mpp54", "mpp55"; + marvell,function = "gpio"; + }; +}; + +&gpio0 { + usb-hub-reset { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pmx_usb_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* SMSC USB2514B on PCB */ + hub@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + hub_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð1 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + + phy-connection-type = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + + nvmem-cells = <&macaddr_bdinfo_6 1>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + /* Marvell 88E6172 */ + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0x0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "ge1_0"; + }; + + port@1 { + reg = <1>; + label = "ge1_1"; + }; + + port@2 { + reg = <2>; + label = "ge1_2"; + }; + + port@3 { + reg = <3>; + label = "ge1_3"; + }; + + ge0: port@4 { + reg = <4>; + label = "ge0"; + nvmem-cells = <&macaddr_bdinfo_6 0>; + nvmem-cell-names = "mac-address"; + }; + + /* + * eth0 is connected to port5 for WAN connection + * on port4 ("GE0") + */ + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð1>; + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&rtc { + status = "disabled"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x100000>; + label = "bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x10000>; + label = "bootloader-env"; + read-only; + }; + + partition@110000 { + reg = <0x110000 0xf0000>; + label = "board_info"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_6: macaddr@6 { + compatible = "mac-base"; + reg = <0x6 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@200000 { + compatible = "iij,seil-firmware"; + reg = <0x200000 0xf00000>; + label = "firmware"; + iij,bootdev-name = "flash"; + iij,seil-id = <0x5345494c 0x32303135>; + }; + + partition@1100000 { + compatible = "iij,seil-firmware"; + reg = <0x1100000 0xf00000>; + label = "rescue"; + iij,bootdev-name = "rescue"; + iij,seil-id = <0x5345494c 0x32303135>; + }; + }; + }; +}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts new file mode 100644 index 0000000000..c0900d7126 --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "armada-385-fortinet-fg-x0e.dtsi" + +/ { + model = "Fortinet FortiGate 30E"; + compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1GB */ + }; +}; + +&gpio_leds { + led-14 { + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + color = ; + linux,default-trigger = "mv88e6xxx-1:00:100Mbps"; + }; + + led-15 { + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + color = ; + linux,default-trigger = "mv88e6xxx-1:00:1Gbps"; + }; +}; + +&pinctrl { + pmx_switch_pins: switch-pins { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>; + + /* Marvell 88E6176 */ + switch@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2>; + reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "wan"; + nvmem-cells = <&macaddr_bdinfo_d880 1>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + nvmem-cells = <&macaddr_bdinfo_d880 5>; + nvmem-cell-names = "mac-address"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + nvmem-cells = <&macaddr_bdinfo_d880 4>; + nvmem-cell-names = "mac-address"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + nvmem-cells = <&macaddr_bdinfo_d880 3>; + nvmem-cell-names = "mac-address"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + nvmem-cells = <&macaddr_bdinfo_d880 2>; + nvmem-cell-names = "mac-address"; + }; + + port@6 { + reg = <6>; + ethernet = <ð0>; + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts new file mode 100644 index 0000000000..d202d71c7f --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "armada-385-fortinet-fg-x0e.dtsi" + +/ { + model = "Fortinet FortiGate 50E"; + compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; +}; + +&gpio_leds { + led-14 { + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + color = ; + linux,default-trigger = "f1072004.mdio-mii:00:1Gbps"; + }; + + led-15 { + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + color = ; + linux,default-trigger = "f1072004.mdio-mii:01:1Gbps"; + }; + + led-16 { + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + color = ; + linux,default-trigger = "mv88e6xxx-1:00:100Mbps"; + }; + + led-17 { + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + color = ; + linux,default-trigger = "mv88e6xxx-1:00:1Gbps"; + }; +}; + +&pinctrl { + pmx_phy_switch_pins: phy-switch-pins { + marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41"; + marvell,function = "gpio"; + }; +}; + +ð1 { + status = "okay"; + + phy-handle = <ðphy0>; + phy-connection-type = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + nvmem-cells = <&macaddr_bdinfo_d880 1>; + nvmem-cell-names = "mac-address"; +}; + +ð2 { + status = "okay"; + + phy-handle = <ðphy1>; + phy-connection-type = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + nvmem-cells = <&macaddr_bdinfo_d880 2>; + nvmem-cell-names = "mac-address"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>; + + /* Marvell 88E1512 */ + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0141,0dd1", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + /* + * LINK/ACT (Green): LED[0], Active Low + * SPEED 100M (Amber): LED[1], Active High + */ + marvell,reg-init = <3 16 0 0x71>, + <3 17 0 0x4>; + }; + + /* Marvell 88E1512 */ + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0141,0dd1", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + /* + * LINK/ACT (Green): LED[0], Active Low + * SPEED 100M (Amber): LED[1], Active High + */ + marvell,reg-init = <3 16 0 0x71>, + <3 17 0 0x4>; + }; + + /* Marvell 88E6176 */ + switch@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2>; + reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + nvmem-cells = <&macaddr_bdinfo_d880 7>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + nvmem-cells = <&macaddr_bdinfo_d880 6>; + nvmem-cell-names = "mac-address"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + nvmem-cells = <&macaddr_bdinfo_d880 5>; + nvmem-cell-names = "mac-address"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + nvmem-cells = <&macaddr_bdinfo_d880 4>; + nvmem-cell-names = "mac-address"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + nvmem-cells = <&macaddr_bdinfo_d880 3>; + nvmem-cell-names = "mac-address"; + }; + + port@6 { + reg = <6>; + ethernet = <ð0>; + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-x0e.dtsi b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-x0e.dtsi new file mode 100644 index 0000000000..8cc2d6bc4a --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-x0e.dtsi @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include +#include +#include +#include "armada-385.dtsi" + +/ { + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_green; + label-mac-device = ð0; + }; + + chosen { + stdout-path = "serial0:9600n8"; + }; + + soc { + ranges = ; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_gpio_keys_pins>; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_gpio_leds_pins>; + + led-0 { + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_ALARM; + }; + + led-1 { + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + color = ; + }; + + led_status_green: led-2 { + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-3 { + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + color = ; + }; + + led-4 { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_ALARM; + }; + + led_status_red: led-5 { + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-6 { + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "mv88e6xxx-1:01:1Gbps"; + }; + + led-7 { + gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "mv88e6xxx-1:01:100Mbps"; + }; + + led-8 { + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "mv88e6xxx-1:02:100Mbps"; + }; + + led-9 { + gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "mv88e6xxx-1:02:1Gbps"; + }; + + led-10 { + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "mv88e6xxx-1:04:1Gbps"; + }; + + led-11 { + gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "mv88e6xxx-1:04:100Mbps"; + }; + + led-12 { + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "mv88e6xxx-1:03:1Gbps"; + }; + + led-13 { + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + color = ; + linux,default-trigger = "mv88e6xxx-1:03:100Mbps"; + }; + }; + + reg_usb_vbus: regulator-usb-vbus { + compatible = "fixed-regulator"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + gpio2: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <0x2>; + }; + + hwmon@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&pinctrl { + pmx_gpio_leds_pins: gpio-leds-pins { + marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35", + "mpp45", "mpp47"; + marvell,function = "gpio"; + }; + + pmx_usb_pins: usb-pins { + marvell,pins = "mpp53"; + marvell,function = "gpio"; + }; + + pmx_gpio_keys_pins: gpio-keys-pins { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&ge0_rgmii_pins>; + status = "okay"; + + phy-connection-type = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + nvmem-cells = <&macaddr_bdinfo_d880 0>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&usb3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pmx_usb_pins>; + status = "okay"; + + vbus-supply = <®_usb_vbus>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x1c0000>; + label = "u-boot"; + read-only; + }; + + partition@1c0000 { + reg = <0x1c0000 0x10000>; + label = "firmware-info"; + + /* + * 0x10 - 0x2f : image name (image1) + * 0x30 - 0x4f : image name (image2) + * 0x170 (1byte): active image (0x0/0x1) + * 0x184 - 0x185: kernel block count (image1) + * 0x18c - 0x18d: rootfs block count (image1) + * 0x194 - 0x195: kernel block count (image2) + * 0x19c - 0x19d: rootfs block count (image2) + * 0x1be (1byte): bit7 -> active flag (image1)? + * 0x1ce (1byte): bit7 -> active flag (image2)? + * + * Note: block size --> 0x200 (512 bytes) + */ + }; + + partition@1d0000 { + reg = <0x1d0000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@1e0000 { + reg = <0x1e0000 0x10000>; + label = "u-boot-env"; + read-only; + }; + + partition@1f0000 { + reg = <0x1f0000 0x10000>; + label = "board-info"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_d880: macaddr@d880 { + compatible = "mac-base"; + reg = <0xd880 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@200000 { + reg = <0x200000 0x600000>; + label = "kernel"; + }; + + partition@800000 { + reg = <0x800000 0x1800000>; + label = "rootfs"; + }; + + partition@2000000 { + reg = <0x2000000 0x600000>; + label = "kn2"; + read-only; + }; + + partition@2600000 { + reg = <0x2600000 0x1800000>; + label = "rfs2"; + read-only; + }; + + partition@3e00000 { + reg = <0x3e00000 0x1200000>; + label = "part1"; + read-only; + }; + + partition@5000000 { + reg = <0x5000000 0x1200000>; + label = "part2"; + read-only; + }; + + partition@6200000 { + reg = <0x6200000 0x1e00000>; + label = "config"; + read-only; + }; + }; + }; +}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts new file mode 100644 index 0000000000..a2ca3158cf --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts @@ -0,0 +1,213 @@ +/* + * Device Tree file for the Linksys WRT32X (Venom) + * + * Copyright (C) 2017 Imre Kaloz + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include +#include +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT32X"; + compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385", + "marvell,armada385", "marvell,armada380"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + append-rootblock = "root=/dev/mtdblock"; + }; +}; + +&expander0 { + wan_amber@0 { + label = "venom:amber:wan"; + reg = <0x0>; + }; + + wan_blue@1 { + label = "venom:blue:wan"; + reg = <0x1>; + }; + + usb2@5 { + label = "venom:blue:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "venom:blue:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "venom:blue:usb3_2"; + reg = <0x7>; + }; + + wps_blue@8 { + label = "venom:blue:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "venom:amber:wps"; + reg = <0x9>; + }; +}; + +&gpio_leds { + power { + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + label = "venom:blue:power"; + }; + + sata { + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + label = "venom:blue:sata"; + }; + + wlan_2g { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + label = "venom:blue:wlan_2g"; + }; + + wlan_5g { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + label = "venom:blue:wlan_5g"; + }; +}; + +&gpio_leds_pins { + marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; +}; + +&nand { + /* Spansion S34ML02G2 256MiB, OEM Layout */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MB */ + read-only; + }; + + partition@200000 { + label = "u_env"; + reg = <0x200000 0x20000>; /* 128KB */ + }; + + partition@220000 { + label = "s_env"; + reg = <0x220000 0x40000>; /* 256KB */ + }; + + partition@180000 { + label = "unused_area"; + reg = <0x260000 0x5c0000>; /* 5.75MB */ + }; + + partition@7e0000 { + label = "devinfo"; + reg = <0x7e0000 0x40000>; /* 256KB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@900000 { + label = "kernel1"; + reg = <0x900000 0x7b00000>; /* 123MB */ + }; + + partition@f00000 { + label = "rootfs1"; + reg = <0xf00000 0x7500000>; /* 117MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@8400000 { + label = "kernel2"; + reg = <0x8400000 0x7b00000>; /* 123MB */ + }; + + partition@8a00000 { + label = "rootfs2"; + reg = <0x8a00000 0x7500000>; /* 117MB */ + }; + + /* last MB is for the BBT, not writable */ + partition@ff00000 { + label = "BBT"; + reg = <0xff00000 0x100000>; + }; + }; +}; + + +&pcie1 { + mwlwifi { + marvell,chainmask = <4 4>; + }; +}; + +&pcie2 { + mwlwifi { + marvell,chainmask = <4 4>; + }; +}; + +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + no-1-8-v; + non-removable; + wp-inverted; + bus-width = <8>; + status = "okay"; +}; + +&usb3_1_vbus { + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; +}; + +&usb3_1_vbus_pins { + marvell,pins = "mpp44"; +}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts new file mode 100644 index 0000000000..f1fd72a93c --- /dev/null +++ b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Device Tree file for ipTIME NAS1dual + * + * Copyright (C) 2020 Sungbo Eo + * + * Based on armada-385-linksys.dtsi + * Copyright (C) 2015 Imre Kaloz + */ + +/dts-v1/; + +#include +#include +#include +#include "armada-385.dtsi" + +/ { + model = "ipTIME NAS1dual"; + compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380"; + + aliases { + led-boot = &led_ready; + led-failsafe = &led_ready; + led-running = &led_ready; + led-upgrade = &led_ready; + label-mac-device = ð0; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; + + soc { + ranges = ; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + power { + label = "Power Button"; + linux,input-type = ; + linux,code = ; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + }; + + copy { + label = "USB Copy Button"; + linux,code = ; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_pins>; + + led_ready: ready { + label = "blue:ready"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + hdd { + label = "blue:hdd"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + + usb { + function = LED_FUNCTION_USB; + color = ; + gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + trigger-sources = <&usb3_0_port1 &usb3_0_port2>; + linux,default-trigger = "usbport"; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_fan_pins>; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>, + <&gpio1 18 GPIO_ACTIVE_HIGH>; + /* We don't know the exact rpm, just use dummy values here. */ + gpio-fan,speed-map = <0 0>, <1 1>, <2 2>; + #cooling-cells = <2>; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&pca9536 1 GPIO_ACTIVE_LOW>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&sata_power_pins>; + + reg_sata_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "sata-power"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + }; +}; + +&ahci0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata-port@0 { + reg = <0>; + target-supply = <®_sata_power>; + #thermal-sensor-cells = <0>; + }; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&ge0_rgmii_pins>; + status = "okay"; + phy-handle = <ðphy1>; + phy-connection-type = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + nvmem-cells = <&macaddr_uboot_fffa8>; + nvmem-cell-names = "mac-address"; +}; + +ð1 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + nvmem-cells = <&macaddr_uboot_fffa8>; + nvmem-cell-names = "mac-address"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + pca9536: gpio@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "power-led", "power-board"; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + /* LED1: On - Link, Blink - Activity, Off - No Link */ + + ethphy0: ethernet-phy@0 { + reg = <0>; + marvell,reg-init = <3 16 0 0x1017>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + marvell,reg-init = <3 16 0 0x1017>; + }; +}; + +&pinctrl { + gpio_keys_pins: gpio-keys-pins { + marvell,pins = "mpp24", "mpp26", "mpp48"; + marvell,function = "gpio"; + }; + + gpio_leds_pins: gpio-leds-pins { + marvell,pins = "mpp18", "mpp20", "mpp51"; + marvell,function = "gpio"; + }; + + gpio_fan_pins: gpio-fan-pins { + marvell,pins = "mpp25", "mpp50"; + marvell,function = "gpio"; + }; + + sata_power_pins: sata-power-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + + uart1_pins_alt: uart-pins-1-alt { + marvell,pins = "mpp45", "mpp46"; + marvell,function = "ua1"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_uboot_fffa8: macaddr@fffa8 { + reg = <0xfffa8 0x6>; + }; + }; + }; + + partition@100000 { + reg = <0x00100000 0x03ec0000>; + label = "firmware"; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000000 0x00600000>; + label = "kernel"; + }; + + partition@600000 { + reg = <0x00600000 0x038c0000>; + label = "rootfs"; + }; + }; + + partition@3fc0000 { + reg = <0x03fc0000 0x00040000>; + label = "config"; + read-only; + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_alt>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + usb3_0_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_0_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; +}; diff --git a/target/linux/mvebu/patches-6.6/302-add_powertables.patch b/target/linux/mvebu/patches-6.6/302-add_powertables.patch index d0c0dbeb0c..36117d0cd1 100644 --- a/target/linux/mvebu/patches-6.6/302-add_powertables.patch +++ b/target/linux/mvebu/patches-6.6/302-add_powertables.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi @@ -214,11 +214,19 @@ &pcie1 { /* Marvell 88W8864, 5GHz-only */ @@ -20,8 +20,8 @@ }; &pinctrl { ---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts +--- a/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts @@ -142,3 +142,205 @@ }; }; @@ -228,8 +228,8 @@ + }; + }; +}; ---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts +--- a/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts @@ -142,3 +142,205 @@ }; }; @@ -436,8 +436,8 @@ + }; + }; +}; ---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts +--- a/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts @@ -142,3 +142,205 @@ }; }; @@ -644,8 +644,8 @@ + }; + }; +}; ---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts +--- a/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts @@ -157,6 +157,18 @@ }; }; @@ -665,8 +665,8 @@ &sdhci { pinctrl-names = "default"; pinctrl-0 = <&sdhci_pins>; ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -223,12 +223,100 @@ pcie@2,0 { /* Port 0, Lane 1 */ diff --git a/target/linux/mvebu/patches-6.6/304-revert_i2c_delay.patch b/target/linux/mvebu/patches-6.6/304-revert_i2c_delay.patch index 930c0f9494..3802b0f16e 100644 --- a/target/linux/mvebu/patches-6.6/304-revert_i2c_delay.patch +++ b/target/linux/mvebu/patches-6.6/304-revert_i2c_delay.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi +--- a/arch/arm/boot/dts/marvell/armada-xp.dtsi ++++ b/arch/arm/boot/dts/marvell/armada-xp.dtsi @@ -237,12 +237,10 @@ }; diff --git a/target/linux/mvebu/patches-6.6/305-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-6.6/305-armada-385-rd-mtd-partitions.patch index 31bd53b1f3..6fd4fa0e20 100644 --- a/target/linux/mvebu/patches-6.6/305-armada-385-rd-mtd-partitions.patch +++ b/target/linux/mvebu/patches-6.6/305-armada-385-rd-mtd-partitions.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-388-rd.dts -+++ b/arch/arm/boot/dts/armada-388-rd.dts +--- a/arch/arm/boot/dts/marvell/armada-388-rd.dts ++++ b/arch/arm/boot/dts/marvell/armada-388-rd.dts @@ -103,6 +103,16 @@ compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ diff --git a/target/linux/mvebu/patches-6.6/306-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-6.6/306-ARM-mvebu-385-ap-Add-partitions.patch index aee033d21f..fbdab2fb94 100644 --- a/target/linux/mvebu/patches-6.6/306-ARM-mvebu-385-ap-Add-partitions.patch +++ b/target/linux/mvebu/patches-6.6/306-ARM-mvebu-385-ap-Add-partitions.patch @@ -5,11 +5,11 @@ Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions Signed-off-by: Maxime Ripard --- - arch/arm/boot/dts/armada-385-db-ap.dts | 6 +++--- + arch/arm/boot/dts/marvell/armada-385-db-ap.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts +--- a/arch/arm/boot/dts/marvell/armada-385-db-ap.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts @@ -218,19 +218,19 @@ #size-cells = <1>; diff --git a/target/linux/mvebu/patches-6.6/307-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-6.6/307-armada-xp-linksys-mamba-broken-idle.patch index fc6d6239ca..b801b54435 100644 --- a/target/linux/mvebu/patches-6.6/307-armada-xp-linksys-mamba-broken-idle.patch +++ b/target/linux/mvebu/patches-6.6/307-armada-xp-linksys-mamba-broken-idle.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -483,3 +483,7 @@ }; }; diff --git a/target/linux/mvebu/patches-6.6/308-armada-xp-linksys-mamba-wan.patch b/target/linux/mvebu/patches-6.6/308-armada-xp-linksys-mamba-wan.patch index 389e03742e..5d8c5811b6 100644 --- a/target/linux/mvebu/patches-6.6/308-armada-xp-linksys-mamba-wan.patch +++ b/target/linux/mvebu/patches-6.6/308-armada-xp-linksys-mamba-wan.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -385,7 +385,7 @@ port@4 { diff --git a/target/linux/mvebu/patches-6.6/309-linksys-status-led.patch b/target/linux/mvebu/patches-6.6/309-linksys-status-led.patch index 0ef15f2943..4cbc2787b2 100644 --- a/target/linux/mvebu/patches-6.6/309-linksys-status-led.patch +++ b/target/linux/mvebu/patches-6.6/309-linksys-status-led.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi @@ -14,6 +14,13 @@ compatible = "linksys,armada385", "marvell,armada385", "marvell,armada380"; @@ -23,8 +23,8 @@ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; default-state = "on"; }; ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -26,6 +26,13 @@ compatible = "linksys,mamba", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; diff --git a/target/linux/mvebu/patches-6.6/310-linksys-use-eth0-as-cpu-port.patch b/target/linux/mvebu/patches-6.6/310-linksys-use-eth0-as-cpu-port.patch index 84d49a004b..8136646671 100644 --- a/target/linux/mvebu/patches-6.6/310-linksys-use-eth0-as-cpu-port.patch +++ b/target/linux/mvebu/patches-6.6/310-linksys-use-eth0-as-cpu-port.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi @@ -116,7 +116,7 @@ }; diff --git a/target/linux/mvebu/patches-6.6/311-adjust-compatible-for-linksys.patch b/target/linux/mvebu/patches-6.6/311-adjust-compatible-for-linksys.patch index a5d3e63810..6722248df7 100644 --- a/target/linux/mvebu/patches-6.6/311-adjust-compatible-for-linksys.patch +++ b/target/linux/mvebu/patches-6.6/311-adjust-compatible-for-linksys.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts +--- a/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts @@ -12,8 +12,8 @@ / { @@ -11,8 +11,8 @@ }; &expander0 { ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -22,9 +22,10 @@ #include "armada-xp-mv78230.dtsi" @@ -27,8 +27,8 @@ aliases { led-boot = &led_power; ---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts +--- a/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts @@ -9,8 +9,9 @@ #include "armada-385-linksys.dtsi" @@ -41,8 +41,8 @@ "marvell,armada380"; }; ---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts +--- a/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts @@ -10,8 +10,8 @@ / { @@ -54,8 +54,8 @@ }; &expander0 { ---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts -+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts +--- a/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts @@ -10,7 +10,8 @@ / { diff --git a/target/linux/mvebu/patches-6.6/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-6.6/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch index f52417e83a..5f84a34769 100644 --- a/target/linux/mvebu/patches-6.6/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch +++ b/target/linux/mvebu/patches-6.6/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch @@ -5,13 +5,13 @@ Subject: ARM: dts: armada388-clearfog: emmc on clearfog base Signed-off-by: Russell King --- - .../arm/boot/dts/armada-388-clearfog-base.dts | 1 + + .../arm/boot/dts/marvell/armada-388-clearfog-base.dts | 1 + .../armada-38x-solidrun-microsom-emmc.dtsi | 62 +++++++++++++++++++ 2 files changed, 63 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi + create mode 100644 arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom-emmc.dtsi ---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts -+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts +--- a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts ++++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts @@ -7,6 +7,7 @@ /dts-v1/; @@ -21,7 +21,7 @@ Signed-off-by: Russell King / { model = "SolidRun Clearfog Base A1"; --- /dev/null -+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi ++++ b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom-emmc.dtsi @@ -0,0 +1,62 @@ +/* + * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC diff --git a/target/linux/mvebu/patches-6.6/313-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-6.6/313-helios4-dts-status-led-alias.patch index 607f436297..50b970aabb 100644 --- a/target/linux/mvebu/patches-6.6/313-helios4-dts-status-led-alias.patch +++ b/target/linux/mvebu/patches-6.6/313-helios4-dts-status-led-alias.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-388-helios4.dts -+++ b/arch/arm/boot/dts/armada-388-helios4.dts +--- a/arch/arm/boot/dts/marvell/armada-388-helios4.dts ++++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts @@ -15,6 +15,13 @@ model = "Helios4"; compatible = "kobol,helios4", "marvell,armada388", diff --git a/target/linux/mvebu/patches-6.6/315-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-6.6/315-armada-xp-linksys-mamba-resize-kernel.patch index c333df2784..d36fe7441c 100644 --- a/target/linux/mvebu/patches-6.6/315-armada-xp-linksys-mamba-resize-kernel.patch +++ b/target/linux/mvebu/patches-6.6/315-armada-xp-linksys-mamba-resize-kernel.patch @@ -6,11 +6,11 @@ Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel Signed-off-by: Tad Davanzo --- - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++---- + arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -454,9 +454,9 @@ reg = <0xa00000 0x2800000>; /* 40MB */ }; diff --git a/target/linux/mvebu/patches-6.6/316-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-6.6/316-armada-370-dts-fix-crypto-engine.patch index b5ed5ece36..653c2b0a18 100644 --- a/target/linux/mvebu/patches-6.6/316-armada-370-dts-fix-crypto-engine.patch +++ b/target/linux/mvebu/patches-6.6/316-armada-370-dts-fix-crypto-engine.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi +--- a/arch/arm/boot/dts/marvell/armada-370.dtsi ++++ b/arch/arm/boot/dts/marvell/armada-370.dtsi @@ -254,7 +254,7 @@ clocks = <&gateclk 23>; clock-names = "cesa0"; diff --git a/target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch b/target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch index 280fc5957e..0699a47765 100644 --- a/target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch +++ b/target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch @@ -1,5 +1,5 @@ ---- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts -+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts +--- a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts ++++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts @@ -31,6 +31,7 @@ chosen {